2AAK6WM2011WUWLAN USB Module

WIESON INTERNATIONAL CO., LTD. WM2011WU User Manual TYPE OF PRODUCT WLAN MODULE CONFIDENTIAL No part of the information shown of this document may be used in any way without office stamp or written consent of WIESON INTERNATIONAL CO., LTD. 1 WM2011WU WLAN USB Module Version Date Change Description 1.0 5 Dec 2014 Initial release WIESON INTERNATIONAL CO., LTD. WM2011WU User Manual TYPE OF PRODUCT WLAN MODULE CONFIDENTIAL No part of the information shown of this document may be used in any way without office stamp or written consent of WIESON INTERNATIONAL CO., LTD. 2 Description WM2011WU is a WLAN 11n USB module, which fully supports the features and functional compliance of IEEE 802.11n,e and i standards. It supports up to 300Mbps high-speed wireless network connections. It is designed to provide excellent performance with low power consumption and enhance the advantages of robust system and cost-effective. It is targeted at competitive superior performance, better power management applications. Features „ Operates in 2.4 GHz frequency bands „ 2x2 MIMO technology improves effective throughput and range over existing 802.11 b/g products „ Data rates: up to 300Mbps „ 802.11e-compatible bursting and I standards „ BPSK, QPSK, 16 QAM, 64 QAM modulation schemes „ WEP, TKIP, and AES, WPA, WPA2 hardware encryption schemes „ Small footprint: 25.0×12.0×2.2mm, 12-half-holes PCB module „ OS support: Android, Windows „ RoHS compliance Application „ Mobile Internet Device „ Tablet PC „ Portable Media Player (PMP) „ Portable Navigation Device (PND) „ IP cam WIESON INTERNATIONAL CO., LTD. WM2011WU User Manual TYPE OF PRODUCT WLAN MODULE CONFIDENTIAL No part of the information shown of this document may be used in any way without office stamp or written consent of WIESON INTERNATIONAL CO., LTD. 3 Functional Block Diagram Block Diagram WIESON INTERNATIONAL CO., LTD. WM2011WU User Manual TYPE OF PRODUCT WLAN MODULE CONFIDENTIAL No part of the information shown of this document may be used in any way without office stamp or written consent of WIESON INTERNATIONAL CO., LTD. 4 Pin Assignment (Top view) Pin Definition Pin Signal Input /Output Description 1 PDn Input WLAN Radio on/off function 2 VDD Power 3.3V Power supply 3 D- I/O USB D- 4 D+ I/O USB D+ 5 GND Power Ground 6 LED Output Low enable LED 7 GND Power Ground 8 RF I/O WLAN RF port 0 9 GND Power Ground 10 GND Power Ground 11 RF I/O WLAN RF port 1 12 GND Power Ground WIESON INTERNATIONAL CO., LTD. WM2011WU User Manual TYPE OF PRODUCT WLAN MODULE CONFIDENTIAL No part of the information shown of this document may be used in any way without office stamp or written consent of WIESON INTERNATIONAL CO., LTD. 5 Application Circuit WIESON INTERNATIONAL CO., LTD. WM2011WU User Manual TYPE OF PRODUCT WLAN MODULE CONFIDENTIAL No part of the information shown of this document may be used in any way without office stamp or written consent of WIESON INTERNATIONAL CO., LTD. 6 Functional Specification Product Description WLAN Standard IEEE802.11b/g/n, Wi-Fi compliant Host Interface USB 2.0 Main Chipset RTL8192EU Dimension 25.0mm x 12.0mm x 2.2mm Package Half-hole PCB module Electrical Specifications Frequency Range 2.412 to 2.484 GHz Data Rate 802.11b: 11, 5.5, 2, 1 Mbps DSSS 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps OFDM 802.11n: HT20 MCS0~15, HT40 MCS0~15 Modulation Technique 802.11b: CCK, DQPSK, DBPSK 802.11g: 64 QAM, 16 QAM, QPSK, BPSK 802.11n: BPSK, QPSK, 16-QAM, 64-QAM Operational Channel 2.4GHz: 11: (Ch. 1-11) – United States 13: (Ch. 1-13) – Europe 14: (Ch. 1-14) – Japan Security WPA, WPA-PSK, WPA2, WPA2-PSK, WEP 64bit & 128bit, IEEE 802.11x, IEEE 802.11i Operating Voltage 3.3V Temperature Limit Ratings Parameter Min. Max. Units Storage Temperature -10 +70 o C Ambient Operating Temperature 0 +70 o C Absolute Maximum Ratings Symbol Parameter Rating Unit VDD USB interface VDD -0.3 to 3.6 V Recommended Operating Range Symbol Parameter MinTyp Max Units VDD USB interface VDD 3.153.3 3.45 V WIESON INTERNATIONAL CO., LTD. WM2011WU User Manual TYPE OF PRODUCT WLAN MODULE CONFIDENTIAL No part of the information shown of this document may be used in any way without office stamp or written consent of WIESON INTERNATIONAL CO., LTD. 7 Module Dimensions All dimensions are in millimeters. Tolerance: +/- 0.15mm WIESON INTERNATIONAL CO., LTD. WM2011WU User Manual TYPE OF PRODUCT WLAN MODULE CONFIDENTIAL No part of the information shown of this document may be used in any way without office stamp or written consent of WIESON INTERNATIONAL CO., LTD. 8 Pin Header Specification Recommend part is code 04. WIESON INTERNATIONAL CO., LTD. WM2011WU User Manual TYPE OF PRODUCT WLAN MODULE CONFIDENTIAL No part of the information shown of this document may be used in any way without office stamp or written consent of WIESON INTERNATIONAL CO., LTD. 9 Layout Design Guide The recommended layout pads for WM2011WU module are shown below. (Module top view) „ DO NOT route any digital or analog signal traces between the RF traces and reference ground. „ DO NOT put any metal shielding in the surrounding area of module and try to leave the module placed in the corner of chassis board as close as possible. „ DO NOT put any metal plane into clearance area. Please keep the clearance area close to the corner of main board or out of the board’s edge. All dimensions are in millimeters. Tolerance: +/- 0.15mm WIESON INTERNATIONAL CO., LTD. WM2011WU User Manual TYPE OF PRODUCT WLAN MODULE CONFIDENTIAL No part of the information shown of this document may be used in any way without office stamp or written consent of WIESON INTERNATIONAL CO., LTD. 10 Package Information Wieson offer one box for 600 pcs module. Each box has 11 trays inside. The top of empty tray is using for fixed the first package tray. The other 10 trays packaged module inside. Each tray dimensions is shown below. All dimensions are in millimeters. WIESON INTERNATIONAL CO., LTD. WM2011WU User Manual TYPE OF PRODUCT WLAN MODULE CONFIDENTIAL No…

Text truncated - open the document above for the full version.

Page 1 of 9 WIESON TECHNOLOGIES CO., LTD. I. Summary This report to account for the measurement setup and result of the Antenna. The measurement setup includes s-parameter, pattern, and gain measurement. The measured data for Antenna are presented and analysis. II. S-Parameter Measurement A. Reflection coefficient : (a) InstrumentNetwork Analyzer. (b) Setup (1) Calibrate the Network Analyzer by one port calibration using O.S.L. calibration kits. (2) Connect the antenna under test to the Network Analyzer. (3) Measure the S11(reflection coefficient) shown in Fig. 1. (4) Generally, the S11 is less than –10dB to ensure the 90% power into antenna and only less than 10% power back to system. Fig.1 Antenna measured in Network Analyzer Page 2 of 9 WIESON TECHNOLOGIES CO., LTD. III. S-Parameter Measurement Result Antenna VSWR V. S . W. R Page 3 of 9 WIESON TECHNOLOGIES CO., LTD. III. S-Parameter Measurement Result Antenna Return Loss Return Loss(dB) Page 4 of 9 WIESON TECHNOLOGIES CO., LTD. IV. The Test Information Anechoic Chamber A. Scope This statement of work defines the requirements of a far-field antenna measurement range, which includes (1) One 325 cm (W) x 285 cm (H) x 640 cm (L) Antenna Measurement Anechoic Chamber, detailed requirements refer section 2.0 . (2) One Far-field Antenna Measurement System with spinning linear CP measurement capabilities, detailed requirement refer section 3.0 . (3) One broad-band transmitted antenna, detailed requirements refer section 8.0 . (4) Three NRL-4433 standard gain antennas, detailed requirements refer section 9.0 . B. Antenna Measurement Anechoic Chamber Fully anechoic chamber with dimension 325 cm in width, 285 cm in height and 640 cm in length. The quiet zone of this Chamber shall be greater than Page 5 of 9 WIESON TECHNOLOGIES CO., LTD. 70 cm @ 0.9 GHz, 50 cm @1.8 GHz, 44 cm @2.4 GHz, 28 cm @5.8 GHz, 16 cm @18 GHz. Contractor should be aware of this anechoic chamber is going to be used for performing far-filed antenna measurement. C. Electrical specifications Frequency Range: 800 MHz to 18 GHz, Quiet zone size: >70 cm @ 0.9 GHz, >50 cm @1.8 GHz, >44 cm @2.4 GHz, >28 cm @5.8 GHz, >16 cm @18 GHz. Quiet zone ripple: < +/- 0.5 dB @1.5~2.4 GHz, < +/- 0.25 dB @2.4~18GHz Page 6 of 9 WIESON TECHNOLOGIES CO., LTD. D. Absorbers We shall design and install proper absorbers on the inner walls of the chamber to guarantee the electrical specifications. However, the absorbers height shall be no less than 24" which enables the space in the chamber to be around 203 cm (W) x 163 cm (H) x 533 cm (L). All the absorber used shall meet NRL-8093 fire retardant regulations E. Far-field Antenna Measurement System We shall supply all the hardware and software which are capable of characterizing antenna radiation patterns from 30 KHz to 6 GHz or 18GHz using the existed Agilent 5230A PNA-L or Agilent 8753ES Vector Network Analyzer. The system shall be able to automatically measure and plot single axis amplitude and phase antenna patterns in either Cartesian or polar formats. F. Far-field measurement software The software consists of the control or data acquisition software and the data plotting software. (1) The data acquisition software shall at least be capable of the following functions: *measuring single frequency per cut - single axis (azimuth); system can automatically switch frequency at the end of a scan. *measuring data in Uni-direction or bi-direction *measuring data at least with azimuth 360 degrees. (+/- 180 degrees or 0-360 degrees) *real time plot in Cartesian or polar format *screen shows real time angle position Page 7 of 9 WIESON TECHNOLOGIES CO., LTD. *system automatically calculates S/N ratio level based on measured signal fluctuation *function to set positioner zero position *operator can set data taking velocity and data sampling interval *entry to allow positioner offset to any angle (2) The data plotting software shall at least be capable of the following functions: *Editing plot data *plotting data in Cartesian, Polar or delimited ASCII output with header information *plotting data in linear or dB scales *normalizing data to peak (dB), standard gain reference (dBi), or no normalization *overlaying data, (drag and drop capability is preferable) *outputting data to any Windows supported printers G. Broadband Transmitted antenna We shall provide a linear-polarized broadband antenna with the specifications better than those listed hereafter in this article, Frequency: 1-18 GHz, Gain: >12 dBi @10 GHz, VSWR:<2,0:1, Front to Back Ration > 20 dB H. NRL4433 Standard Gain Horns We shall provide one WR-430, WR-187 one DRH0118 standard gain horns which meets the specifications of NRL-4433 report. The operating frequency of WR-430 standard gain horn is from 1.7 to 2.6 GHz, and WR-187 from 3.95 to 5.85 GHz, and DRH-0118 from 0.8 to 18GHz. We shall also provide NRL-4433 theoretical gain curves and tables for the standard gain horns. Page 8 of 9 WIESON TECHNOLOGIES CO., LTD. V. Antenna Measurement Photo Y Z X Y Z Page 9 of 9 WIESON TECHNOLOGIES CO., LTD. VI. Antenna Measurement Result WiFi Antenna Gain Value 2.4 1.17 -1.89 65 2.45 1.95 -1.27 75 2.5 2.08 -1.53 70 VII. Antenna Photo

Wireless Connected World Specification(Preliminary) Frequency (GHz) 2.4 -2.5(Ant1) 2.4 -2.5(Ant2) Peak Gain (dBi) 3.0 3.0 VSWR 2.0 : 1 Isolation (dB) -15 Impedance (Ohms) 50 Max. Power (Watts) 1 Weight (g) 10 Connector IPEX Cable length (mm) L Dimension (mm) 66.1 x 36 x 6.5 Operating Temp (⁰C) -20⁰C ~ +65⁰C ALC140-052030-A 802.11 b/g/n single band 2T2R Metal Antenna Patent Pending http://www.lynwave.com Tel: +886 2 35018700 Mail: [email protected] 1 Features •Single band IEEE 802.11 b/g/n standard •On-board mount or case mounting •High efficiency •Quick integration Mechanical Dimensions Gain pattern Ant1 Ant2

Wireless Connected World Specification(Preliminary) Frequency (GHz) 2.4 -2.5(Ant1) 2.4 -2.5(Ant2) Peak Gain (dBi) 3.0 3.0 VSWR 2.0 : 1 Isolation (dB) -15 Impedance (Ohms) 50 Max. Power (Watts) 1 Weight (g) 2.4 Connector IPEX Cable length (mm) L Dimension (mm) 54.4 x 39.3 x 0.6 Operating Temp (⁰C) -20⁰C ~ +65⁰C ALC140-051021-A 802.11 b/g/n single band embedded antenna Patent Pending http://www.lynwave.com Tel: +886 2 35018700 Mail: [email protected] 1 Features •Single band IEEE 802.11 b/g/n standard •On-board mount or case mounting •High efficiency •Quick integration Mechanical Dimensions Gain pattern Ant1 Ant2 Ant_1 Ant_2

Wireless Connected World ALO140-052030 802.11 b/g/n 2T2R Metal Antenna Specification (Preliminary) Frequency (MHz) 2400 -2500 Peak Gain (dBi) 3.0 VSWR 2.0 : 1 Power (Watts) 1 Impedance (Ohms) 50 Isolation (dB) -12 Dimension (mm) 27.6 x 8.7 x 11 Weight (g) 0.8 http://www.lynwave.com Tel: +886 2 35018700 Mail: [email protected] 1 Features • IEEE 802.11 b/g/n standard •On-board mount •High efficiency •Quick integration Mechanical Dimensions 2450 MHz Gain Pattern PORT_1 PORT_2

Report No.: E2/2014/B0042 FCC ID: 2AAK6WM2011WU Issue Date: Dec. 17, 2014 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group APPENDIX 2 EXTERNAL PHOTOGRAPHS OF EUT Report No.: E2/2014/B0042 FCC ID: 2AAK6WM2011WU Issue Date: Dec. 17, 2014 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group All View of EUT Front View of EUT Report No.: E2/2014/B0042 FCC ID: 2AAK6WM2011WU Issue Date: Dec. 17, 2014 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Back View of EUT-1 Back View of EUT-2

Label & Location WIESON WM2011WU-XX FCC ID: 2AAK6WM2011WU 17 mm 11 mm

Report No.: E2/2014/B0042 FCC ID: 2AAK6WM2011WU Issue Date: Dec. 17, 2014 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group APPENDIX 2 INTERNAL PHOTOGRAPHS OF EUT Report No.: E2/2014/B0042 FCC ID: 2AAK6WM2011WU Issue Date: Dec. 17, 2014 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Internal View of EUT-1 Report No.: E2/2014/B0042 FCC ID: 2AAK6WM2011WU Issue Date: Dec. 17, 2014 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Antenna A Antenna B Report No.: E2/2014/B0042 FCC ID: 2AAK6WM2011WU Issue Date: Dec. 17, 2014 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-32…

Text truncated - open the document above for the full version.

Report No.: E2/2014/B0042 FCC ID: 2AAK6WM2011WU Issue Date: Dec. 17, 2014 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group 13 MAXIMUM PERMISSIBLE EXPOSURE (MPE) 13.1 Standard Applicable According to 1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Com- mission’s guideline. This is a Mobile device, the MPE is required. According to 1.1310 and 2.1093 RF exposure is calculated. Limits for Maximum Permissive Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minute) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f 2 ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / F/1500 30 1500-15000 / / 1.0 30 F = frequency in MHz * = Plane-wave equipment power density Report No.: E2/2014/B0042 FCC ID: 2AAK6WM2011WU Issue Date: Dec. 17, 2014 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group 13.2 Maximum Permissible Exposure (MPE) Evaluation 802.11b Average Power Output (dBm) CH Frequency (MHz) Data Rate Required Limit 1 2 5.5 11 1 2412 14.89 14.65 14.49 14.32 1 Watt = 30 dBm 6 2437 14.95 14.74 14.52 14.36 1 Watt = 30 dBm 11 2462 14.90 14.71 14.50 14.35 1 Watt = 30 dBm MPE Prediction (802.11b) Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4R 2 Where: S = Power density P = Power input to antenna G = Power gain of the antenna in the direction of interest relative to an isotropic radiator R = Distance to the center of radiation of the antenna Maximum average output power at antenna input 14.95 (dBm) Maximum average output power at antenna input 31.26079367 (mW) Duty cycle: 100 (%) Maximum Pav : 31.26079367 (mW) Antenna gain (typical): 3 (dBi) Maximum antenna gain: 1.995262315 (numeric) Prediction distance: 20 (cm) Prediction frequency: 2437 (MHz) MPE limit for uncontrolled exposure at prediction 1 (mW/cm2) Power density at predication frequency at 20 (cm) 0.012415 (mW/cm^2) Measurement Result The predicted power density level at 20 cm is 0.012415mW/cm 2 . This is below the uncontrolled exposure limit of 1mW/cm 2 at 2437MHz. Report No.: E2/2014/B0042 FCC ID: 2AAK6WM2011WU Issue Date: Dec. 17, 2014 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their r…

Text truncated - open the document above for the full version.

Report No.: E2/2014/B0042 FCC ID: 2AAK6WM2011WU Issue Date: Dec. 17, 2014 Page: 1 of 201 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_condition…

Text truncated - open the document above for the full version.