2AAKS-DV30Wall Mount Stereo

4x25W RMS 200x110.5 190 xmm 6 NTSC/PAL/AUTO(optional) Audio receiver 18 1919 19 19 19 20 20 20 20 21 21 21 21 22 22 22 22 23 23 23 24 24 25 25 25 29 30 31 33 34 25 18 11 14 15 17 7. To play an audio file from a external Bluetooth device(mobil e phone) on the wall mount Stereo 8.To setup your Stereo using (1) Turn on the NFC function of your mobile phone and m (2) With the NFC detection area of NFC(only support mobile phone with NFC function) ake sure the screen is active and unlocked. your phone touch with the NFC detection area of the Stereo, you can connect or disconnect your mobile phone with the Stereo conv eniently. Note: For the first time pair and connect, it will ask you to input a password. The password is “ 0000”. 5.1 Incoming call ringing, short press TEL button on the remote control or 1 button on the front panel to accept the call. (1) Short press TEL button on the remote control or 1 button on the front panel, it will show last phone number on the LCD, then it will e xecute the dialing. (2) Short press REDIAL button on the remote control, it will dial the last phone numbe r. 5.2 To reject Incoming call ringing, short press HANG UP button on the remote control the front panel to REJECT the call. or 2 button on 5.3 During a phone call, short press HANG UP button on the remote control the front panel to end the call. or 2 button on Note: During other modes(execpt Bluetooth conversation), press BT MODE button on the front panel to switch the mode with others. Note: When an incoming call is present the caller’s phone numbe r will be displayed on the screen. (with mobile phone) or receiving a call, the car audio will tem porarily wake up. After the device has been paired successfully and Wall mount St ereo screen displays LINK OKIf your mobile device supports A2DP you will then be able to st ream music from your Bluetooth device so it can be played by stereo speaker. You must select on your mobile Bluetooth device to play the aud io through Bluetooth. If your mobile device supports AVRCP then you will be able to c ontrol the basic phone audio output functions by the Wall mount Stereo controls. Eg . Play Pause . Bluetooth with NFC function Auxiliary inputs on front and rear USB input with charging function 2 zone multi room audio output 2 x RCA a udio/video outputs for connectin g 2 additional TVs 1 x s ubwoofer output Clock terminated with an insulated end to avoid wires shorting or ear thing which Do not attempt to disassemble or adjust this product, contact a service center for assistance. 4 Fig.1 Fig.2 Fig.3 A B + s i d e u p correct correct wrongwrong wipe it off before using. , Note: Press BT MODE button on the front panel to switch between Unit and Phone during BT phone conversation. mobile Short press CLEAR button to cancel the wrongly input number if necessary Short press TEL button to execute the dialing. result in injury or fire. 30 PREVIOUS BUTTON/CLEAR BUTTON 9 AV IN MODE BUTTON UP BUTTON NEXT BUTTON RIGHT BUTTON DOWN BUTTON AM/FM RADIO MODE BUTTON RANDOM BUTTON REPEAT BUTTON LEFT BUTTON PROGRAM BUTTON 1.6 Locations and Names of the Controls 1. DISC SLOT 2. IR REMOTE CONTROL SENSOR 3. 1/2/3 BUTTON 1 TEL /REDIAL BUTTON 2 HANG UP BUTTON 4.ZONE A/B BUTTON 5. 6.PLAY/PAUSE BUTTON RADIO RE GION SELECT BUTTON 7.POWER BUTTON 8.STOP BUTTON9.AUX IN SOCKET 10.HEADPHONE SOCKET 11. USB SOCKET 12.BT MODE BUTTON/EQ BUTTON 13.MICROPHONE IN 14.RESET BUTTON15.INPUT MODE BUTTON 16.5/RANDOM BUTTON 17.VOL KNOB/SEL BUTTON 18.6/TITLE BUTTON 19.4/REPEAT BUTTON 20.LCD DISPLAY21.EJECT BUTTON 22.NFC DETECTION AREA 7 8 9 10 11 14 15 16 17 18 21 2 4 3 5 19 RESET AB 12 3 RPT4 RDM5 TITLE6 ZONE VOLUME AUX USB 12 13 1 22 20 6 / BUTTON the relative content of SYSTEM SETUP menu for details. 2 8 HUE It is for adjusting the hue of the video output. SATURATION It is for adjusting the saturation of the video output. SHARPNESS It is for adjusting the sharpness of the video output. 5.17.5 SPEAKER SETUP DOWNMIXIt is for selecting your desired sound effect when there is no center speaker and subwoofer. There are 3 modes: LT/RT, STEREO, VSS. LT/RT: When playing a disc with PRO LOGIC Dolby stereo effect, choose the item, so it will output audio si gnal with vivid theatre effect. STEREO: If you choose the item, when outputting audio signal wi th 5.1 channels, it will output the left and r ight channels of signa l ; when outputting audio signal with 2 cha nnels, it will output the commo n 2 cha nnels of stereo signal. VSS: If you choose the item, when playin g a disc recorded with 5.1 cha nnels, the main channel speakers can output audio signal with VSS effect. 5.17.6 DIGITAL SETUP DYNAMIC RANGE After selecting the compression mode of LINE OUT, set the item, so you can adjust the linear compression ratio. If you set it to be FULL, the Peak-to-Peak value of the audio signal is the minimum; if you set it to be O FF, the Peak-to- Peak value is the maximum. DUAL MONO It is for selecting a desired audio output mode for the left an d right ways of signal. It is mainly for Karaoke of Ac3. There ar e 4 modes in all as fo llows: STEREO, MONO L, MONO R, MIX MONO. CONTRAST It is for adjusting the contrast of the video output Description of icons on the LCD display1.USB icon After inserting a USB storage, USB icon is lit. 2.DVD icon After inserting a DVD disc, DVD icon is lit. 3.DISC icon After inserting a disc(DVD,VCD,CD), DISC icon is lit. 4.MP3 icon If a disc or a USB storage contains MP3 format files, MP3 i con is lit. 5.RDM icon In r andom playback mode, RDM icon is lit. 6.MONO icon In mono a udio mode, MONO icon is lit. 7.STEREO In stereo audio mode, STEREO icon is lit. 8. ZONE <1> icon When s electing the ZONE A speakers, ZONE <1> icon is lit. 9.ZONE <2> icon When s electing the ZON E B speakers, ZONE <2> icon is lit. 10. FOLDER icon If a USB storage contains more than 2 fo lders(contains playback file), FOLDER icon is lit. 11.PLAYBACK icon During disc or USB playback state, PLA YBACK icon is lit. 12.PAUSE icon During …

Text truncated - open the document above for the full version.

Furrion Ltd Suite 3-5, 16/F Pacific Plaza, 410 Des Voeux Road West, Sai Wan, Hong Kong DATE :2014-7-07 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint Hank.Yan of Global United Technology Services Co., Ltd. 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District Shenzhen Guangdong to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Furrion Ltd and Suite 3-5, 16/F Pacific Plaza, 410 Des Voeux Road West, Sai Wan, Hong Kong Dated this / Day of 7/07/2014 / Agency agreement expiration date: 7/07/2015 By: Pei Hua Deng Signature Printed Title: Manager On behalf of : Furrion Ltd Telephone: 0769-86528327

Differences Declaration To whom concern, We Furrion Ltd declares: The product model(s) DV3000 are identical in the same PCB layout, interior structure and electrical circuits with the model DV3100 which tested in Global United Technology Services Co., Ltd., the only differences are the model name for commercial purpose. Authorized signature: Date: 2014-07-07

Furrion Ltd Suite 3-5, 16/F Pacific Plaza, 410 Des Voeux Road West, Sai Wan, Hong Kong DATE 2014-7-07 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AAKS-DV30 Product Name: Wall Mount Stereo Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:  Schematics  Block diagram  Operational Description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this / Day of 7/07/2014 / By: Pei Hua Deng Signature Printed Title: Manager On behalf of : Furrion Ltd Telephone: 0769-86528327

Label location

RF Exposure evaluation According to KDB 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison eirp = pt x gt = (EXd) 2 /30 where: pt = transmitter output power in watts, gt = numeric gain of the transmitting antenna (unitless), E = electric field strength in V/m, --- 10 ((dBuV/m)/20) /10 6 d = measurement distance in meters (m)---3m So pt = (EXd) 2 /30 x gt Field strength = 97.58 dBuV/m @3m Ant gain 0dBi ;so Ant numeric gain=1 So pt={ [10 (97.58 /20) /10 6 x3] 2 /30x1 }x1000 mW =1.72mW So (1.72mW/5mm)x √2.480GHz = 0.54 <3 Then SAR evaluation is not required

Global United Technology Services Co., Ltd. Report No.: GTSE14060105601 Authorized Signature: Robinson Lo Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the GTS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of GTS International Electrical Approvals or testing done by GTS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by GTS International Electrical Approvals in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” FCC REPORT Applicant: Furrion Ltd Address of Applicant: Suite 3-5, 16/F Pacific Plaza, 410 Des Voeux Road West, Sai Wan, Hong Kong Equipment Under Test (EUT) Product Name: Wall Mount Stereo Model No.: DV3000, DV3100 Trade Mark: Furrion FCC ID: 2AAKS-DV30 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.249:2012 Date of sample receipt: June 24, 2014 Date of Test: July 01-07, 2014 Date of report issued: July 07, 2014 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTSE14060105601 Global United Technology Services Co., Ltd. Project No.: GTSE140601056RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 31 2 Version Version No. Date Description 00 July 07, 2014 Original Prepared By: Date: July 07, 2014 Project Engineer Check By: Date: July 07, 2014 Reviewer Report No.: GTSE14060105601 Global United Technology Services Co., Ltd. Project No.: GTSE140601056RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 31 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 VERSION .................................................................................................................................................. 2 3CONTENTS .............................................................................................................................................. 3 4TEST SUMMARY ..................................................................................................................................... 4 5GENERAL INFORMATION ...................................................................................................................... 5 5.1CLIENT INFORMATION ......................................................................................................................... 5 5.2GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.3TEST MODE ........................................................................................................................................ 7 5.4DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.5TEST FACILITY .................................................................................................................................... 7 5.6TEST LOCATION ................................................................................................................................. 7 5.7OTHER INFORMATION REQUESTED BY THE CUSTOMER ......................................................................... 7 6TEST INSTRUMENTS LIST ..................................................................................................................... 8 7TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 9 7.1ANTENNA REQUIREMENT: .................................................................................................................... 9 7.2RADIATED EMISSION METHOD ........................................................................................................... 10 7.2.1Field Strength of The Fundamental Signal ................................................................................ 12 7.2.2Spurious emissions .................................................................................................................... 13 7.2.3Bandedge emissions.................................................................................................................. 17 7.320DB OCCUPY BANDWIDTH .............................................................................................................. 18 8TEST SETUP PHOTO ............................................................................................................................ 20 9EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 21 Report No.: GTSE14060105601 Global United Technology Services Co., Ltd. Project No.: GTSE140601056RF 2nd Floor, Block No.2, Laodong…

Text truncated - open the document above for the full version.

Radiated Emission