2AAMHSDV01ASports SDV

Adhesive Mounts Tether mount L-Shaped Mount VII) Operatio nal Instructio ns Gener al instruction s: 1. Power on /off: Hold down for 2 sec on ds , then release. 2. To rec or d: Press, pr ess again to stop 3. To take a ph oto: Press 4. Zooming Useto zoom in andto zoom out 5. Playback fun ction: Press Menu navigations: Press to open menu Use and to scroll through options Press to selec t option Press to go back a screen Video: Change into video recording mode Car DVR: Change into Car DVR mode Res olution: Change the res olution of your video recording Wide FOV: Adju st the view angle between wide or normal Dual streams: Switch between single streaming and dual streaming Dat e/ Time stamp: Enables /disables the dat e/time stamp Time lapse: Determine the interval of pictures taken Res olution: Change the quali ty of your photo Photo Burs t: How many pictures tak en per second Self-Timer: The del ay between button pres sed and photo tak en Dat e/Time stamp: Enables /disables the dat e/time stamp Cycli ng record time: The duration for each cycle of recording Shock Sensitivity: How sensitive the camcorder is to shocks Dat e/Time stamp: Enables /disables the dat e/time stamp White Bal ance: Change the white bal ance setting Contras t: Change the contras t setting Shar pness: Change the shar pness setting Underwat er Mode: Change the color preference for under wat er shooting Date/Time se tting: Adju st the dat e and the time Format SD car d: Format the SD car d in use, this will delete all file on the SD card LCD Timeout: Set the idle time before the LCD display turns off Language: Change the language for the user interface DIS: Enables/Disables the digital image stabili zation function. System: Change between NTSC and PAL. Backli ght: Set the brightness of the LCD monitor Auto Power Off: Set the idle time before the camcorder powers down Rotation: Set the screen to be normal or flipped Audio Volume: Adju st the audio volume Firmwar e Version: Check the current version of the firmware. Default Settings: Restore to the default setting Enables/disables the Wi-Fi function FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limit s for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of f and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. 12 CAUTION: Any changes or modifications not expressly approved by the p arty responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. 13

Date July. 25, 2013 BABT TCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Confidentiality Request FCC ID: 2AAMHSDV01A Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, CRAYS Technology Limited. hereby requests permanent confidential treatment of information accompanying this application as outlined below: Common exhibits for which confidentiality is requested are: Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, (signed by FCC listed Grantee contact) Name/Title: Dean Liu / Engineer Company Officer: CRAYS Technology Limited TEL: 886-2-82011700 FAX: 886-2-82011702 Email: [email protected]

Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 2 of 29 External Photos Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 3 of 29 Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 4 of 29 Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 5 of 29 Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 6 of 29 Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 7 of 29 Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 8 of 29 Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 9 of 29 Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 10 of 29

Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 11 of 29 Internal Photos Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 12 of 29 Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 13 of 29 Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 14 of 29 Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 15 of 29 Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 16 of 29 Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 17 of 29 Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 18 of 29 Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 19 of 29 Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 20 of 29 Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 21 of 29

Registration number: W6M21305-13209-C-1 FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Page 19 of 49 3.2 Equivalent isotropic radiated power FCC Rule: 15.247(b)(3) EIRP = max. conducted output power + antenna gain EIRP = 18.42 dBm + 0.67 dBi = 19.09 dBm Limit: EIRP = +36 dBm for Antenna gain <6dBi Test equipment used: ETSTW-RE 055 3.3 RF Exposure Compliance Requirements FCC OET Bulletin 65 Edition 97.01 determines the equations for predicting RF fields and applicable limits. The prediction for power density in the far-field but will over-predict power density in the near field, where it could be used for walking a “worst case” or conservative prediction. PG S = --------- 4πR 2 S – Power Density P – Output power ERP R – Distance D – Cable Loss AG – Antenna Gain Item Unit Value Remarks P mW 69.5024 Peak value D dB AG dBi 0.67 G 1.1668 Calculated Value R cm 20 Assumed value S mW/cm 2 0.0161 Calculated value Limits: Limit for General Population / Uncontrolled Exposure Frequency (MHz) Power Density (mW/cm 2 ) 1500 – 100.000 1.0

of Applicant: CRAYS Technology Limited Address: No.151, Qionglin S. Rd., Xinzhuang Dist., New Taipei City 24263, Taiwan (R.O.C) Tested and Prepared by Worldwide Testing Services (Taiwan) Co., Ltd. FCC Registration No.: 930600 Industry Canada filed test laboratory Reg. No. IC 5679A-1 A2LA Accredited No.: 2732.01 Report No.: W6M21305-13209-C-1 6F, NO. 58, LANE 188, RUEY-KUANG RD., NEIHU TAIPEI 114, TAIWAN, R.O.C. TEL: 886-2-66068877 FAX: 886-2-66068879 E-mail: [email protected] FCC PART 15 SUBPART C TEST REPORT for Sport SDV Model No.: SDV-01A FCC ID: 2AAMHSDV01A Registration number: W6M21305-13209-C-1 FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Page 2 of 49 TABLE OF CONTENTS 1 GENERAL INFORMATION ................................................................................................... 3 1.1 NOTES................................................................................................................................... 3 1.2 TESTING LABORATORY......................................................................................................... 4 1.2.1 Location .......................................................................................................................4 1.2.2 Details of accreditation status ..................................................................................... 4 1.3 DETAILS OF APPROVAL HOLDER............................................................................................ 4 1.4 APPLICATION DETAILS.......................................................................................................... 5 1.5 G ENERAL INFORMATION OF TEST ITEM................................................................................. 5 1.6 T EST STANDARDS.................................................................................................................. 6 2 TECHNICAL TEST ..................................................................................................................7 2.1 SUMMARY OF TEST RESULTS................................................................................................. 7 2.2 T EST ENVIRONMENT............................................................................................................. 7 2.3 TEST EQUIPMENT LIST.......................................................................................................... 8 2.4 GENERAL TEST PROCEDURE............................................................................................... 10 3 TEST RESULTS (ENCLOSURE) ......................................................................................... 12 3.1 P EAK OUTPUT POWER (TRANSMITTER) ............................................................................... 13 3.2 EQUIVALENT ISOTROPIC RADIATED POWER......................................................................... 19 3.3 RF EXPOSURE COMPLIANCE REQUIREMENTS..................................................................... 19 3.4 TRANSMITTER RADIATED EMISSIONS IN RESTRICTED BANDS............................................. 20 3.5 S PURIOUS EMISSIONS (TX) .................................................................................................. 21 3.6 R ADIATED EMISSION ON THE BAND EDGE........................................................................... 29 3.7 MINIMUM 6 dB BANDWIDTH............................................................................................... 33 3.8 PEAK POWER SPECTRAL DENSITY...................................................................................... 39 3.9 R ADIATED EMISSION FROM DIGITAL PART......................................................................... 45 3.10 POWER LINE CONDUCTED EMISSION.................................................................................. 46 APPENDIX.............................................................................................................................. 49 Registration number: W6M21305-13209-C-1 FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Page 3 of 49 1 General Information 1.1 Notes The purpose of conformity testing is to increase the probability of adherence to the essential requirements or conformity specifications, as appropriate. The complexity of the technical specifications, however, means that full and thorough testing is impractical for both technical and economic reasons. Furthermore, there is no guarantee that a test sample which has passed all the relevant tests conforms to a specification. Neither is there any guarantee that such a test sample will interwork with other genuinely open systems. The existence of the tests nevertheless provides the confidence that the test sample possesses the qualities as maintained and that is performance generally conforms to representative cases of communications equipment. The test results of this test report relate exclusively to the item tested as specified in 1.5. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the Worldwide Testing Services(Taiwan) Co., Ltd. Specific Conditions: Usage of the hereunder tested device in combination with other integrated or external antennas requires at least additional output power measurements, spurious emission measurements, conducted emission measurements (AC supply lines) and radio frequency exposure evaluations for each individual configuration performed, for certification by FCC. The test sample is able to work according IEEE 802.11 b/g/n. This report is related to FCC Part 15 C (DSSS and OFDM device). Tester: July 02, 2013 Robert Ren Date WTS-Lab. Name Signature Technical responsibility for area of testing: July 02, 2013 Danny Sung Date WTS Name Signature Registration number: W6M21305-13209-C-1 FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Page 4 of 49 1.2 Testing laboratory 1.2.1 Location OATS No.5-1, Lishui, Shuang …

Text truncated - open the document above for the full version.

Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 22 of 29 Set Up Photo of Radiated Emission EMI _Below 1GHz Battery Play with HDMI Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 23 of 29 Above 1GHz Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 24 of 29 Below 1GHz Battery_REC Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 25 of 29 Above 1GHz Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 26 of 29 Below 1GHz USB Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 27 of 29 Above 1GHz Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 28 of 29 RF Registration number: W6M21305-13209-FCC FCC ID: 2AAMHSDV01A Worldwide Testing Services(Taiwan) Co., Ltd. Appendix page 29 of 29 Set Up Photo of Conducted Emission