2AANZBRK-LBMIWireless LED Karaoke Mic with Built-in Speaker

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jul. 05, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AANZBRK-LBMI [DGL Group LTD.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Amy Chao)

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jul. 05, 2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AANZBRK-LBMI [DGL Group LTD.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Amy Chao)

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process FCC ID: 2AANZBRK-LBMI 2.911(d)(7) USA Designated Agent for Service of Process We, [DGL Group LTD.] (“the applicant”) designate [DGL Group LTD.] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent & Applicant Company name: DGL Group LTD. Address: 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Contact Name: Amy Chao Telephone No: 001-732-692-5180 Email: [email protected] FRN: 0024048670 Signature: Date: Jul. 05, 2024 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-comm unications-supply-chain-through-the

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Agent Authorization Company: DGL Group LTD. Address: 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Product Name: Wireless LED Karaoke Mic with Built-in Speaker Model Number(s): BRK-LBMI, BRK-LBMI-WHT, BRK-LBMI-XXX Product Description: Wireless LED Karaoke Mic with Built-in Speaker We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Jul. 05, 2024 Name: Amy Chao Company: DGL Group,Ltd.

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jul. 05, 2024 Subject; Request for Confidentiality FCC ID: 2AANZBRK-LBMI To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Contact person: Amy Chao

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Product Similarity Declaration Product name: Wireless LED Karaoke Mic with Built-in Speaker Model name: BRK-LBMI, BRK-LBMI-WHT, BRK-LBMI-XXX FCC ID: 2AANZBRK-LBMI We (DGL Group LTD.) hereby state that all the models are electrical identical including the same software parameter and hardware design, same mechanical structure and design, the only difference is the color of the product appearance. Signature: Contact person: Amy Chao

Report No.: AGC15705240613AP02 Page 1 of 4 EXTERNAL PHOTOS ALL VIEW OF EUT TOP VIEW OF EUT Report No.: AGC15705240613AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC15705240613AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC15705240613AP02 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 30mm&10mm FCC ID: 2AANZBRK-LBMI

Report No.: AGC15705240613AP02 Page 1 of 3 INTERNAL PHOTOS VIEW OF EUT(PORT) OPEN VIEW OF EUT (FIGURE 1) Report No.: AGC15705240613AP02 Page 2 of 3 VIEW OF BATTERY INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC15705240613AP02 Page 3 of 3 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) ****************************************End of Report************************************* BT Antenna

Page 1 of 10 RF Exposure Report Report No.: AGC15705240613FH01 FCC ID : 2AANZBRK-LBMI APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Wireless LED Karaoke Mic with Built-in Speaker BRAND NAME : BREAKOUT MODEL NAME : BRK-LBMI, BRK-LBMI-WHT, BRK-LBMI-XXX APPLICANT : DGL Group LTD. DATE OF ISSUE : Jul. 05, 2024 STANDARD(S) : FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC15705240613FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 05, 2024 Valid Initial Release Report No.: AGC15705240613FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Mobile Device Evaluation Method and Limit ................................................................................................ 9 6. Measurement Results ................................................................................................................................... 10 7. Measurement Evaluation .............................................................................................................................. 10 Report No.: AGC15705240613FH01 Page 4 of 10 1. General Information Applicant DGL Group LTD. Address 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Manufacturer DGL Group LTD. Address 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Factory N/A Address N/A Product Designation Wireless LED Karaoke Mic with Built-in Speaker Brand Name BREAKOUT Test Model BRK-LBMI Series Model(s) BRK-LBMI-WHT, BRK-LBMI-XXX Difference Description Only the color of the product appearance is different, everything else is completely consistent. Date of receipt of test item Jun. 07, 2024 Date of Test Jun. 07, 2024~Jul. 05, 2024 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Thea Huang (Project Engineer) Jul. 05, 2024 Reviewed By Calvin Liu (Reviewer) Jul. 05, 2024 Approved By Max Zhang Authorized Officer Jul. 05, 2024 Report No.: AGC15705240613FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version V1.0 Software Version V1.0 Modulation Type BR GFSK, EDR π /4-DQPSK, 8DPSK BLE GFSK 1Mbps GFSK 2Mbps Maximum Transmitter Power BR&EDR: 1.024dBm BLE: -3.387dBm Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation PCB Antenna Antenna Gain 1dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC15705240613FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC15705240613FH01 Page 7 of 10 3.3 Environmental Conditions NORMAL CONDITIONS Temperature range (°C) 15 - 35 Relative humidity range 20 % - 75 % Pressure range (kPa) 86 - 106 Power supp…

Text truncated - open the document above for the full version.

Productspecification QuickReferenceDate Allthetechnicaldataandinformationcontainedhereinaresubjecttochangewithoutpriornotice AntennaLayout&moduleonthe systemboard AntennaGain GainTable Antennamoduleonthesystemboard Frequency2.45GHz*1 Ant.PortInputPwr.(dBm)0(Typ.BTclass2outputpower) Tot.Rad.Pwr.(dBm)-2.3(Inputpwr–losspwr) PeakEIRP(dBm)1.0 Directivity(dBi)1(alldirectionantenna) Efficiency(dB)-2.3(58.5%) Gain(dBi)1.0 MaximumPower(dBm)1.3(XY-plane) MinimumPower(dBm)-4(XY-plane) Avg.Power(dBm)-0.5(XY-plane) Max/MinRatio(dB)5.3(XY-plane) Max/AvgRatio(dB)1.8(XY-plane) Min/AvgRatio(dB)-3.5(XY-plane) AverageGain(dB)-0.5(AvgGainXY-plane) UnitindBi @2.44GHz XY-planeXZ-planeYZ-planeEfficiency PeakAvg.PeakAvg.PeakAvg. ModuleBoard 0.7-0.51.0-3.80.4-3.0 58.5% Manufacture: ZHUHAI JIELI TECHNOLOGY CO.,LTD Address: No. 333, Kexing Road, Nanping Town, Zhuhai City, Guangdong Province, China ReturnLoss TheEnvironmentofAntennaRadiationPattern 3Dradiationpatterndiagram XY-planeXZ-planeYZ-plane

Page 1 of 76 FCC Test Report Report No.: AGC15705240613FR01 FCC ID : 2AANZBRK-LBMI APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Wireless LED Karaoke Mic with Built-in Speaker BRAND NAME : BREAKOUT MODEL NAME : BRK-LBMI, BRK-LBMI-WHT, BRK-LBMI-XXX APPLICANT : DGL Group LTD. DATE OF ISSUE : Jul. 05, 2024 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC15705240613FR01 Page 2 of 76 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 05, 2024 Valid Initial Release Report No.: AGC15705240613FR01 Page 3 of 76 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Receiver Input Bandwidth ......................................................................................................................... 7 2.6 Equally Average Use of Frequencies and Behaviour................................................................................ 7 2.7 Pseudorandom Frequency Hopping Sequence ........................................................................................ 8 2.8 Special Accessories .................................................................................................................................. 9 2.9 Equipment Modifications ........................................................................................................................... 9 2.10 Antenna Requirement ............................................................................................................................. 9 3. Test Environment .......................................................................................................................................... 10 3.1 Address of The Test Laboratory .............................................................................................................. 10 3.2 Test Facility .............................................................................................................................................. 10 3.3 Environmental Conditions ....................................................................................................................... 11 3.4 Measurement Uncertainty ....................................................................................................................... 11 3.5 List of Equipment Used ........................................................................................................................... 12 4.System Test Configuration ............................................................................................................................ 14 4.1 EUT Configuration ................................................................................................................................... 14 4.2 EUT Exercise ........................................................................................................................................... 14 4.3 Configuration of Tested System .............................................................................................................. 14 4.4 Equipment Used in Tested System ......................................................................................................... 14 4.5 Summary of Test Results ........................................................................................................................ 15 5. Description of Test Modes ........................................................................................................................... 16 6. RF Output Power Measurement .................................................................................................................. 17 6.1 Provisions Applicable .............................................................................................................................. 17 6.2 Measurement Procedure ......................................................................................................................... 17 6.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 17 6.4 Measurement Result ............................................................................................................................... 18 7. 20dB Bandwidth and 99% Occupied Bandwidth Measurement ............................................................... 24 7.1 Provisions Applicable .............................................................................................................................. 24 7.2 Measurement Procedure ......................................................................................................................... 24 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 24 7.4 Measurement Results ............................................................................................................................. 25 8. Conducted Band Edge and Out-of…

Text truncated - open the document above for the full version.

Report No.: AGC15705240613AP01 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC15705240613AP01 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP RF CONDUCTED TEST SETUP ****************************************End of Report*************************************