2AANZMACC3-IN-1 WONDER DOCK

3-IN-1 WONDER DOCK User Manual SA-MACC Qi ® Certified Wireless Charger Swivel Charger Holder Digital Alarm Clock Night Light Wireless Charger Function Keys Touch Switch-Color Sensor 1- Function Overview Wireless charger Digital alarm clock Multicolor night light 2- Digital Alarm Clock 2.1- Function Keys 2.2 - Set Time - Long press [M]: To change the 12/24 hour format by pressing ◁ or ▷. Then short press M to set hour, press ◁ or ▷. To set the minutes, press again M. - Short press ◁: add hours/minutes - Short press ▷: decrease hours/minutes 2.3. Set Alarm -Short press [M]: to select ALARM (possible to set three alarms). - Press ◁ to turn ALARM on and o; - When ALARM is displayed, long press M to set the ALARM time (A1, A2, A3 in sequence), and press ◁ ▷ to set the ALARM time. Notice: The alarm rings for about 20s, and stops automatically. After about 10s of snoozing, the alarm rings again for about 20s, and the alarm sound ends after the ringing. During the ringing period, you can press other keys to interrupt, after the interruption, the alarm will end. 2.4.Display brightness (br) - When the time is displayed, short press ▷, to enter the display brightness (br) setting. - Short press ▷ to change brightness (br) level (5 levels). - Press M to exit. 2.5.Display brightness (br) levels: - br 0: Display brightness according to time; - br 1-4: The brightness increases in turn; - br 5: 5s screen-o mode. MADE IN CHINA WARNING: Cancer risk from Lead Exposure – www.P65Warnings.ca.gov WARNING: - This is not a toy, keep away from children. - Don’t use it while the temperature over 113°F/45°C. - Don’t put it in fire or other high temperature place. Company name: DGL Group, Ltd. Address: 2045 Lincoln Highway, Edison, NJ 08817 www.dglusa.com FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 3- Multicolor Night Light - Tap: Switch LED color/Turn on the LED light - Long press: Turn o LED light - Double tap: automatic color-changing mode 4- Specifications Materials: ABS+Acrylic Dimension: 187x91x64(mm) Input: 5V 3A 9V 3A (QC/PD) Wireless Output: 15W Max. Support: 3W/5W/7.5W/10W/15W Compatibility: all QI ® -enable phones Working Distance:≤8mm Charging Eciency:75%-85%alarm will end. FCC ID: 2AANZMACC SA-MACC Instructions Manual BLACK & White Print Paper：125g 2.5” x 4”

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 07-03-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AANZMACC [DGL Group LTD.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Amy Chao)

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process FCC ID: 2AANZMACC 2.911(d)(7) USA Designated Agent for Service of Process We, [DGL Group LTD.] (“the applicant”) designate [DGL Group LTD.] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent & Applicant Company name: DGL Group LTD. Address: 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Contact Name: Amy Chao Telephone No: 001-732-692-5180 Email: [email protected] FRN: 0024048670 Signature: Date: Jul. 03, 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-comm unications-supply-chain-through-the

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Agent Authorization Company: DGL Group,Ltd. Address: 2045 Lincoln Highway, Edison, NJ 08817, United States Product Name: 3-IN-1 WONDER DOCK Model Number(s): SA-MACC, SA-MACC-BLK, SA-MACC-WHT, SA-MACC-WHT-HG, SA-MACC-BLK-HG Product Description: 3-IN-1 WONDER DOCK We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-09-14 Name: Amy Chao Company: DGL Group,Ltd.

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Sep.14, 2023 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2AANZMACC Model Number: SA-MACC, SA-MACC-BLK, SA-MACC-WHT, SA-MACC-WHT- HG, SA-MACC-BLK-HG To Whom It May Concern: We, The DGL Group LTD. hereby declare that the models are identical except the appearance color. Except for the different above, no other modification is performed. Sincerely, Signature: Contact person: Amy Chao

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-07-03 Subject; Request for Confidentiality FCC ID: 2AANZMACC To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Contact person: Amy Chao

Report No.: AGC15705230613AP02 Page 1 of 4 EXTERNAL PHOTOS ALLVIEW OF EUT TOP VIEW OF EUT Report No.: AGC15705230613AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC15705230613AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC15705230613AP02 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 60mm&45mm

Report No.: AGC15705230613AP02 Page 1 of 5 INTERNAL PHOTOS OPEN VIEW OF EUT INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC15705230613AP02 Page 2 of 5 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC15705230613AP02 Page 3 of 5 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) Report No.: AGC15705230613AP02 Page 4 of 5 INTERNAL VIEW OF EUT (FIGURE 6) INTERNAL VIEW OF EUT (FIGURE 7) Report No.: AGC15705230613AP02 Page 5 of 5 INTERNAL VIEW OF EUT (FIGURE 8) INTERNAL VIEW OF EUT (FIGURE 9) ****************************************End of Report************************************* 42cm WPT Antenna 1 WPT Antenna 2 40cm

Page 1 of 13 RF Exposure Report Report No.: AGC15705230613FH01 FCC ID : 2AANZMACC APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : 3-IN-1 WONDER DOCK BRAND NAME : SARINA MODEL NAME : SA-MACC, SA-MACC-BLK, SA-MACC-WHT, SA-MACC-WHT-HG, SA-MACC-BLK-HG APPLICANT : DGL Group LTD. DATE OF ISSUE : Jun. 27, 2023 STANDARD(S) : KDB680106 D01 RF Exposure Wireless Charging Base App v03r01 REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC15705230613FH01 Page 2 of 13 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jun. 27, 2023 Valid Initial Release Report No.: AGC15705230613FH01 Page 3 of 13 TABLE OF CONTENTS 1. GENERAL INFORMATION .............................................................................................................................. 4 2. PRODUCT INFORMATION .............................................................................................................................. 5 2.1 PRODUCT TECHNICAL DESCRIPTION ................................................................................................ 5 2.2 TEST FREQUENCY LIST ........................................................................................................................ 5 3. TEST ENVIRONMENT ..................................................................................................................................... 6 3.1 ADDRESS OF THE TEST LABORATORY .............................................................................................. 6 3.2 TEST FACILITY ....................................................................................................................................... 6 3.3 ENVIRONMENTAL CONDITIONS........................................................................................................... 7 3.4 MEASUREMENT UNCERTAINTY .......................................................................................................... 7 3.5 LIST OF EQUIPMENTS USED ............................................................................................................... 7 4. EQUIPMENT USED IN TESTED SYSTEM ...................................................................................................... 8 5. DESCRIPTION OF TEST MODES ................................................................................................................... 8 6. RF EXPOSURE MEASUREMENT ................................................................................................................... 9 6.1 REFER EVALUATION METHOD ............................................................................................................. 9 6.2 TEST LIMITS ........................................................................................................................................... 9 6.3 MEASUREMENT SETUP ...................................................................................................................... 10 6.4 MEASUREMENT PROCEDURE ............................................................................................................ 11 6.5 MEASUREMENT RESULTS ................................................................................................................. 12 APPENDIX I: PHOTOGRAPHS OF TEST SETUP ............................................................................................ 13 Report No.: AGC15705230613FH01 Page 4 of 13 1. GENERAL INFORMATION Applicant DGL Group LTD. Address 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Manufacturer DGL Group LTD. Address 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Factory N/A Address N/A Product Designation 3-IN-1 WONDER DOCK Brand Name SARINA Test Model SA-MACC Series Model SA-MACC-BLK, SA-MACC-WHT, SA-MACC-WHT-HG, SA-MACC-BLK-HG Difference Description All the same except for the appearance color Date of receipt of test item Jun. 02, 2023 Date of test Jun. 02, 2023 - Jun. 27, 2023 Deviation from Standard No any deviation from the test method Test Result Pass Prepared By Sky Zhou (Project Engineer) Jun. 27, 2023 Reviewed By Calvin Liu (Reviewer) Jun. 27, 2023 Approved By Max Zhang (Authorized Officer) Jun. 27, 2023 Report No.: AGC15705230613FH01 Page 5 of 13 2. PRODUCT INFORMATION 2.1 PRODUCT TECHNICAL DESCRIPTION Hardware Version V0.1 Software Version V1.0 Equipment Specification WPT Operation Frequency WPT Band I: 110.8kHz-205kHz WPT Band II: 110.8kHz-205kHz Modulation Type ASK Number of channels 2 Channels Field Strength of Fundamental 68.42dBμV/m (Max) Antenna Designation Coil Antenna Antenna Gain 0dBi Power Supply Input: DC 5V/3A, DC 9V/3A Output: 15W/10W/7.5W/5W Adapter Information N/A 2.2 TEST FREQUENCY LIST For Wireless Headset: Frequency Band Channel Number Frequency 110.8kHz-205kHz 01 133.7kHz For Mobile Phone: Frequency Band Channel Number Frequency 110.8kHz-205kHz 01 116.8kHz Report No.: AGC15705230613FH01 Page 6 of 13 3. TEST ENVIRONMENT 3.1 ADDRESS OF THE TEST LABORATORY Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 TEST FACILITY The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to be in compliance with CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements) for the Competence of Testing and Calibration Laboratories. A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to be in compliance with ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laborator…

Text truncated - open the document above for the full version.

Page 1 of 31 FCC Test Report Report No.: AGC15705230613FE10 FCC ID : 2AANZMACC APPLICATION PURPOSE Original Equipment PRODUCT DESIGNATION : 3-IN-1 WONDER DOCK BRAND NAME : SARINA MODEL NAME : SA-MACC, SA-MACC-BLK, SA-MACC-WHT, SA-MACC-WHT-HG, SA-MACC-BLK-HG APPLICANT : DGL Group LTD. DATE OF ISSUE : Jun. 27, 2023 STANDARD(S) : FCC Part 15 Subpart C REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC15705230613FE10 Page 2 of 31 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jun. 27, 2023 Valid Initial Release Report No.: AGC15705230613FE10 Page 3 of 31 TABLE OF CONTENTS 1. GENERAL INFORMATION .............................................................................................................................. 5 2. PRODUCT INFORMATION .............................................................................................................................. 6 2.1 PRODUCT TECHNICAL DESCRIPTION ................................................................................................ 6 2.2 TEST FREQUENCY LIST ........................................................................................................................ 6 2.3 RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................. 7 2.4 TEST METHODOLOGY .......................................................................................................................... 7 2.5 SPECIAL ACCESSORIES ....................................................................................................................... 7 2.6 EQUIPMENT MODIFICATIONS .............................................................................................................. 7 2.7 ANTENNA REQUIREMENT .................................................................................................................... 7 3. TEST ENVIRONMENT ..................................................................................................................................... 8 3.1 ADDRESS OF THE TEST LABORATORY .............................................................................................. 8 3.2 TEST FACILITY ....................................................................................................................................... 8 3.3 ENVIRONMENTAL CONDITIONS........................................................................................................... 9 3.4 MEASUREMENT UNCERTAINTY .......................................................................................................... 9 3.5 LIST OF EQUIPMENTS USED ............................................................................................................. 10 4.SYSTEM TEST CONFIGURATION .................................................................................................................. 11 4.1 EUT CONFIGURATION .......................................................................................................................... 11 4.2 EUT EXERCISE ...................................................................................................................................... 11 4.3 CONFIGURATION OF TESTED SYSTEM ............................................................................................. 11 4.4 EQUIPMENT USED IN TESTED SYSTEM............................................................................................ 11 4.5 SUMMARY OF TEST RESULTS ........................................................................................................... 12 5. DESCRIPTION OF TEST MODES ................................................................................................................. 13 6. FIELD STRENGTH OF FUNDAMENTAL ...................................................................................................... 14 6.1 PROVISIONS APPLICABLE .................................................................................................................. 14 6.2 MEASUREMENT PROCEDURE ........................................................................................................... 15 6.3 FIELD STRENGTH CALCULATION ...................................................................................................... 16 6.4 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) ............................................... 17 6.5 MEASUREMENT RESULTS.................................................................................................................. 18 7. 20 dB BANDWIDTH ....................................................................................................................................... 24 7.1 PROVISIONS APPLICABLE .................................................................................................................. 24 7.2 MEASUREMENT PROCEDURE ........................................................................................................... 24 7.3 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) ............................................... 24 7.4 MEASUREMENT RESULTS.................................................................................................................. 25 8. AC POWER LINE CONDUCTED EMISSION TEST ...................................................................................... 27 8.1 LIMITS OF LINE CONDUCTED EMISSION TEST ............................................................................... 27 Report No.: AGC15705230613FE10 Page 4 of 31 8.2 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) ............................................... 27 8.3 PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST .......................................... 28 8.4 FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST ........................................................ 28 8.5 MEASUREMENT RESULTS .....................................................…

Text truncated - open the document above for the full version.

Report No.: AGC15705230613AP01 Page 1 of 4 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 30MHz RADIATED EMISSION TEST SETUP BELOW 1GHz Report No.: AGC15705230613AP01 Page 2 of 4 AC POWER LINE CONDUCTED TEST SETUP RF HEALTH ASSESSMENT TEST PHOTOS H-Field & E-Field Strength_Position A Report No.: AGC15705230613AP01 Page 3 of 4 H-Field & E-Field Strength_Position B H-Field & E-Field Strength_Position C Report No.: AGC15705230613AP01 Page 4 of 4 H-Field & E-Field Strength_Position D H-Field & E-Field Strength_Position E ****************************************End of Report*************************************