2AANZMSMSWireless Magnetic Speaker

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jun. 19, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AANZMSMS [DGL Group LTD.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Amy Chao)

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jun. 19, 2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AANZMSMS [DGL Group LTD.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Amy Chao)

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process FCC ID: 2AANZMSMS 2.911(d)(7) USA Designated Agent for Service of Process We, [DGL Group LTD.] (“the applicant”) designate [DGL Group LTD.] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent & Applicant Company name: DGL Group LTD. Address: 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Contact Name: Amy Chao Telephone No: 001-732-692-5180 Email: [email protected] FRN: 0024048670 Signature: Date: Jun. 19, 2024 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-comm unications-supply-chain-through-the

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jun. 19, 2024 Subject; Request for Confidentiality FCC ID: 2AANZMSMS To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Contact person: Amy Chao

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Product Similarity Declaration Product name: Wireless Magnetic Speaker Model name: BRK-MSMS-GLD, BRK-MSMS-PNK, BRK-MSMS-BLK, BRK-MSMS- BLU, BRK-MSMS-XXX, BRK-MSMS FCC ID: 2AANZMSMS We (DGL Group LTD.) hereby state that all the models are electrical identical including the same software parameter and hardware design, same mechanical structure and design, the only difference is the color of the product appearance. Signature: Contact person: Amy Chao

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States (Jun. 19, 2024) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Attestation of Global Compliance (Shenzhen) Co., Ltd) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Name: Amy Chao Title: General Manager

Report No.: AGC15705240617AP02 Page 1 of 5 EXTERNAL PHOTOS All VIEW-1 OF EUT All VIEW-2 OF EUT Report No.: AGC15705240617AP02 Page 2 of 5 TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC15705240617AP02 Page 3 of 5 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC15705240617AP02 Page 4 of 5 LEFT VIEW OF EUT RIGHT VIEW OF EUT Report No.: AGC15705240617AP02 Page 5 of 5 PORT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 5mm&20mm FCC ID: 2AANZMSMS

Report No.: AGC15705240617AP02 Page 1 of 3 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) BATTERY VIEW OF EUT (FIGURE 1) Report No.: AGC15705240617AP02 Page 2 of 3 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) Report No.: AGC15705240617AP02 Page 3 of 3 INTERNAL VIEW OF EUT (FIGURE 3) ****************************************End of Report************************************* BT Antenna

Page 1 of 10 RF Exposure Report Report No.: AGC15705240617FH01 FCC ID : 2AANZMSMS APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Wireless Magnetic Speaker BRAND NAME : BREAKOUT MODEL NAME : BRK-MSMS-GLD, BRK-MSMS-PNK, BRK-MSMS-BLK, BRK-MSMS-BLU, BRK-MSMS-XXX, BRK-MSMS APPLICANT : DGL Group LTD. DATE OF ISSUE : Jun. 19, 2024 STANDARD(S) : FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC15705240617FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jun. 19, 2024 Valid Initial Release Report No.: AGC15705240617FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Mobile Device Evaluation Method and Limit ................................................................................................ 9 6. Measurement Results ................................................................................................................................... 10 7. Measurement Evaluation .............................................................................................................................. 10 Report No.: AGC15705240617FH01 Page 4 of 10 1. General Information Applicant DGL Group LTD. Address 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Manufacturer DGL Group LTD. Address 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Factory N/A Address N/A Product Designation Wireless Magnetic Speaker Brand Name BREAKOUT Test Model BRK-MSMS-GLD Series Model(s) BRK-MSMS-PNK, BRK-MSMS-BLK, BRK-MSMS-BLU, BRK-MSMS-XXX, BRK-MSMS Difference Description Only the color of the product appearance is different, everything else is completely consistent. Date of receipt of test item Jun. 07, 2024 Date of Test Jun. 07, 2024 - Jun. 19, 2024 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Thea Huang (Project Engineer) Jun. 19, 2024 Reviewed By Calvin Liu (Reviewer) Jun. 19, 2024 Approved By Max Zhang (Authorized Officer) Jun. 19, 2024 Report No.: AGC15705240617FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version V1.0 Software Version V1.0 Modulation Type BT_BLE: GFSK BT_BR_EDR: GFSK, π /4-DQPSK, 8DPSK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation PCB Antenna Antenna Gain -0.58dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC15705240617FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC15705240617FH01 Page 7 of 10 3.3 Environmental Conditions Normal Conditions Temperature range (°C) 15 - 35 Re…

Text truncated - open the document above for the full version.

Inverted F Antenna Specification Summary ITEM ANT SPEC Model Name 2.4G ANT Horizontal Vertical 2400MHz 2450MHz 2500MHz 2400MHz 2450MHz 2500MHz Center Frequency -1.26 -0.76 -0.58 -5.25 -2.46 -1.86 MAX. Gain -0.58dBi Polarization Horizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance 50 Ohm Antenna Length 38.20mm Manufacture ZHUHAI JIELI TECHNOLOGY CO.,LTD Antenna Photo & Length (mm) Address:No. 333, Kexing Road, Nanping Town, Zhuhai City, Guangdong Province, China Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Gain(dBi) Frequency (MHz) Max Min Avg 2400 -1.26174 -30.0801 -7.18716 2450 -0.765802 -36.5604 -7.48023 2500 -0.585582 -22.0315 -6.59127 Vertical: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Gain(dBi) Frequency (MHz) Max Min Avg 2400 -5.2537 -22.1424 -12.4294 2450 -2.4652 -24.5837 -10.4702 2500 -1.86120 -29.5214 -9.20432

Page 1 of 76 FCC Test Report Report No.: AGC15705240617FR02 FCC ID : 2AANZMSMS APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Wireless Magnetic Speaker BRAND NAME : BREAKOUT MODEL NAME : BRK-MSMS-GLD, BRK-MSMS-PNK, BRK-MSMS-BLK, BRK-MSMS-BLU, BRK-MSMS-XXX, BRK-MSMS APPLICANT : DGL Group LTD. DATE OF ISSUE : Jun. 19, 2024 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC15705240617FR02 Page 2 of 76 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jun. 19, 2024 Valid Initial Release Report No.: AGC15705240617FR02 Page 3 of 76 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Receiver Input Bandwidth ......................................................................................................................... 7 2.6 Equally Average Use of Frequencies And Behaviour ............................................................................... 7 2.7 Pseudorandom Frequency Hopping Sequence ........................................................................................ 8 2.8 Special Accessories .................................................................................................................................. 9 2.9 Equipment Modifications ........................................................................................................................... 9 2.10 Antenna Requirement ............................................................................................................................. 9 3. Test Environment .......................................................................................................................................... 10 3.1 Address of The Test Laboratory .............................................................................................................. 10 3.2 Test Facility .............................................................................................................................................. 10 3.3 Environmental Conditions ....................................................................................................................... 11 3.4 Measurement Uncertainty ....................................................................................................................... 11 3.5 List of Equipment Used ........................................................................................................................... 12 4.System Test Configuration ............................................................................................................................ 14 4.1 EUT Configuration ................................................................................................................................... 14 4.2 EUT Exercise ........................................................................................................................................... 14 4.3 Configuration of Tested System .............................................................................................................. 14 4.4 Equipment Used in Tested System ......................................................................................................... 14 4.5 Summary of Test Results ........................................................................................................................ 15 5. Description of Test Modes ........................................................................................................................... 16 6. RF Output Power Measurement .................................................................................................................. 17 6.1 Provisions Applicable .............................................................................................................................. 17 6.2 Measurement Procedure ......................................................................................................................... 17 6.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 17 6.4 Measurement Result ............................................................................................................................... 18 7. 20dB Bandwidth and 99% Occupied Bandwidth Measurement ............................................................... 24 7.1 Provisions Applicable .............................................................................................................................. 24 7.2 Measurement Procedure ......................................................................................................................... 24 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 24 7.4 Measurement Results ............................................................................................................................. 25 8. Conducted Ban…

Text truncated - open the document above for the full version.

Report No.: AGC15705240617AP01 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC15705240617AP01 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP RF CONDUCTED TEST SETUP ****************************************End of Report*************************************