2AAP6M7859Internet Tablet

Power/Lock key: Power ON/OFF when held about 3 seconds. Unlock Stand-by Mode. Front Camera Volume-/+Key: Decrease/Increase audio volume. Micro SD card slot. : 2MP camera on front of tablet. Rear Camera: 2MP camera on back of tablet. Micro USB Port: Connect to a computer via micro USB cable for transfer data. Earphone Jack MIC Jack: Microphone. Speaker: Dual Speakers. 1 2 4 3 Key Layout and Definitions Introduction To Desktop Slide to right Slide to the right from the left side for desktop screen program in running. Slide to left Image slide applications Slide to the left from the right side of the screen to start Charm menu column. On Window 8.1 home screen, just click on the icon to start the application. You may need to log on to your Microsoft account before the application runs properly. Introduction To Desktop Introduction To App Interface Slide with fingerSlide upward In the start screen, slide upward from the bottom of the screen to visit all icon (APPs) interfaces. In start screen, slide finger right and left to move the image Enlarge 1 2 If you want to fix more application programs on the start interface, see the operation in the figure below, (1) lightly touch, press and hold the application program magnet for about one second and then let it go, and select (2) to fix to the start screen. Charm Menu Column Slide to the left from the right side of the screen to start Charm menu column, including: Start, Device, Setup, Share, and Search Program. Conversely, if you want to cancel or delete certain application in the start screen, (1) lightly touch, press and hold the application program magnet for about one second and then let it go and run, and select (2) attribute column to cancel the programs such as fixation and deletion and then it can be completed. 1 2 Can let you search the files and application programs in the Tablet PC. Can let you share the program through social exchange website or e-mail. Can return to the start screen. From the start screen, you can also use this function to return the application program that is opened in the latest. Can let you read, write and share files, connect external screen or printer with the device connected to the Tablet PC. Can let you set up the Table PC. Search Menu Device Menu 190mm 100mm Quick Start Guide Intel Tablet NBW7800 C All view ID： 1 2 4 5 3 6 7 8 9 On the touch screen, narrow two fingers to reduce the image. On the touch screen, widen two fingers to enlarge the image. Share Menu Set up Menu Dual-Screen Application On my computer in (Figure 1), slide it inward from the left side of the screen, drag it and hold. Let go when seeing double interfaces appear. In (Figure 2), press the partition button on the middle partition line and drag right and left to partition the display proportion of the double screens. (Figure 1) (Figure 2) Dormancy, restart and power off Security Management User and password setup Method for quick setup: Click the “Setup” button in “Charm” setup, and select “Change computer setup”. Select “User” on the left and click “Create local account” in “Your account” on the right side. After inputting the password of Complete Windows Live Id Account, input username, password, confirm password and password prompt. Basic Operations Thank you for your interest in our Nobis Android Tablets. We appreciate your business and if you need to get help just reach out to [email protected] Life-time tech support Warranty TO OBTAIN WARRANTY SERVICE Bidwell Technologies Inc Web site: www.bidwelltec.com from 8:30AM to 5:00PM Monday through Friday Pacific Time. Contact Nobis Technical Support Reduce MIC MODEL: NBW7800 C FCC ID:2AAP6M7859 INPUT: DC 5V/2A MADE IN CHINA 5 7 6 9 8 Simply register your Nobis Tablet at www.bidwelltec.com. As long as you own your Nobis Tablet we can provide you with Quick Set Up guides for your tablet or answer a quick “How does this work again” call or email to our Customer Service Department. However you MUST register within 60 days of purchase. Please note, Normal Product Warranty is separate and should be read and understood as well. FCC NOTICE The following statement applies to all products that have received FCC approval. Applicable products bear the FCC logo, and/or an FCC ID in the format FCC ID: 2AAP6M7859 on the product label. This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. RF EXPOSURE INFORMATION (FCC SAR) DEVICE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exp…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 1 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (current) 4.0 5.0 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0 SHENZHEN ZOWEE TECHNOLOGY CO.,LTD 2014-12-30 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, SHENZHEN ZOWEE TECHNOLOGY CO.,LTD hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): Product Name:Internet Tablet Model: M7859, NBW7800 C,NBW7805 C, NBW7850 C, DPM7808, DPM7828, DPM7858, TM7806, TM7854, DPW785A, DPW785B FCC ID: 2AAP6M7859 Sincerely, Client’s signature Client’s name / title Qiao Ying/ Manager Contact information / address Address: Science &Technology Industrial Park of Privately, Owned Enterprises, Pingshan, Xili, Nanshan District, Shenzhen, CHINA Mail: [email protected] Fax: +86-755-26511004 Tel: +86-755-26997888

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 SHENZHEN ZOWEE TECHNOLOGY CO.,LTD Science &Technology Industrial Park of Privately Science &Technology Industrial Park of Privately Owned Enterprises, Pingshan, Xili, Nanshan District, Shenzhen, CHINA Dec 30, 2014 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2AAP6M7859 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram- Long-term confidential - Schematics- Long-term confidential - Operational Description- Long-term confidential The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature : Client’s name / title: Qiao Ying/ Manager Company Name: SHENZHEN ZOWEE TECHNOLOGY CO.,LTD Address: Science &Technology Industrial Park of Privately, Owned Enterprises, Pingshan, Xili, Nanshan District, Shenzhen, CHINA Mail: [email protected] Fax: +86-755-26511004 Tel: +86-755-26997888

Differences Declaration To whom concern, We company SHENZHEN ZOWEE TECHNOLOGY CO.,LTD hereby declares: The product model(s): NBW7800 C, NBW7805 C, NBW7850C, DPM7808, DPM7828, DPM7858, TM7806, TM7854, DPW785A DPW785B is identical in the same PCB layout, interior structure and electrical circuits with the model M7859 which tested in Shenzhen Huatongwei International Inspection Co., Ltd, the only differences are the model name for commercial purpose. The trademarks TMAX, APEX, DOPO, NOBIS, DAGE, NUVISION will be selected by different customers owing to commercial requirements. Sincerely yours, Name: Qiao Ying Position: Manager CompanyAdress: Science &Technology Industrial Park of Privately, Owned Enterprises, Pingshan, Xili, Nanshan District, Shenzhen, CHINA Te l / F a x : +86-755-26997888/+86-755-26511004 E-Mail: [email protected]

Date: 2014-12-30 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: 2AAP6M7859 To Whom It May Concern: This letter is to ascertain that SHENZHEN ZOWEE TECHNOLOGY CO.,LTD Product Internet Tablet has been the units used for conducting FCC compliance testing, the DoC part will be tested by FCC recognized test lab. If you have any question or concerns, pls. contact us. Sincerely, Client’s signature: Client’s name / title: Qiao Ying/ Manager Contact information / address Address: Science &Technology Industrial Park of Privately, Owned Enterprises, Pingshan, Xili, Nanshan District, Shenzhen, CHINA E-mail: [email protected] Fax: +86-755-26511004 Tel: +86-755-26997888

Report N 6. Ext o: TRE14 ternal an 412004201 nd Internnal Phot Ex tos of th xternal P he EUT Photos Page: : 45 of 49 Report N o: TRE14412004201 Page: : 46 of 49 Report N o: TRE1 4412004201 Page: : 47 of 49

MIC 丝印：Pantone Cool Gray 7C MODEL NO.: M7859 FCC ID:2AAP6M7859 INPUT: DC 5V/2A MADE IN CHINA Production date: Nov/2014 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Report N o: TRE1 4 W 412004201 WIFI/BTAnte In nna nternal Photos Page: : 48 of 49 Report N o: TRE14412004201 .........End of Report....... Page: : 49 of 49

TEST REPORT Report Reference No. .................... : TRE1412004204 R/C..........: 86151 FCC ID ............................................. : 2AAP6M7859 Applicant’s name ........................... : SHENZHEN ZOWEE TECHNOLOGY CO.,LTD Address ............................................. : Science &Technology Industrial Park of Privately Owned Enterprises, Pingshan, Xili, Nanshan District, Shenzhen, PR CHINA Manufacturer......................................: SHENZHEN ZOWEE TECHNOLOGY CO.,LTD Address...............................................: Science &Technology Industrial Park of Privately Owned Enterprises, Pingshan, Xili, Nanshan District, Shenzhen, PR CHINA Test item description .................... : Internet Tablet Trade Mark ....................................... : TMAX ,APEX,DOPO,NOBIS,DAGE,NUVISION Model/Type reference ....................... : M7859 Listed Model(s) ................................. : NBW7800 C ,NBW7805 C,NBW7850 C ,DPM7808, DPM7828, DPM7858 ,TM7806 ,TM7854 ,DPW785A, DPW785B Standard ......................................... : ANSI C95.1–1999/47CFR §2.1093 Date of receipt of test sample.......: Dec 09, 2014 Date of testing........................: Dec 20, 2014 Date of issue...........................: Dec 24, 2014 Result .................. ........................: PASS Compiled by ( position+printed name+signature) .. : File administrators Any Yang Supervised by ( position+printed name+signature) .. : Project Engineer Jerome Luo Approved by ( position+printed name+signature) .. : RF Manager Hans Hu Testing Laboratory Name ............. : Shenzhen Huatongwei International Inspection Co., Ltd Address ............................................. : Keji Nan No.12 Road, Hi-tech Park, Shenzhen, China Shenzhen Huatongwei International Inspection Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Huatongwei International Inspection Co., Ltd is acknowledged as copyright owner and source of the material. Shenzhen Huatongwei International Inspection Co., Ltd takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Report No.: TRE1412004204 Page 2 of 51 Contents 1. TEST STANDARDS 3 2. SUMMARY 4 2.1. Client Information 4 2.2. Product Description 4 2.3. Statement of Compliance 5 2.4. Equipment under Test 5 2.5. Short description of the Equipment under Test (EUT) 5 2.6. EUT configuration 5 3. TEST ENVIRONMENT 6 3.1. Address of the test laboratory 6 3.2. Test Facility 6 3.3. Environmental conditions 7 3.4. SAR Limits 7 3.5. Equipments Used during the Test 7 4. SAR MEASUREMENTS SYSTEM CONFIGURATION 8 4.1. SAR Measurement Set-up 8 4.2. DASY5 E-field Probe System 9 4.3. Phantoms 10 4.4. Device Holder 10 4.5. Scanning Procedure 11 4.6. Data Storage and Evaluation 11 4.7. Tissue Dielectric Parameters for Head and Body Phantoms 13 4.8. Tissue equivalent liquid properties 14 4.9. System Check 14 4.10. SAR measurement procedure 15 5. TEST CONDITIONS AND RESULTS 19 5.1. Conducted Power Results 19 5.2. Simultaneous TX SAR Considerations 20 5.3. SAR Measurement Results 22 5.4. SAR Measurement Variability 23 5.5. Measurement Uncertainty (300MHz-3GHz) 24 5.6. System Check Results 26 5.7. SAR Test Graph Results 27 6. CALIBRATION CERTIFICATE 28 6.1. Probe Calibration Ceriticate 28 6.2. D2450V2 Dipole Calibration Ceriticate 39 6.3. DAE4 Calibration Ceriticate 47 7. TEST SETUP PHOTOS 50 8. EXTERNAL PHOTOS OF THE EUT 51 Report No.: TRE1412004204 Page 3 of 51 1. TEST STANDARDS The tests were performed according to following standards: IEEE Std C95.1, 1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 KHz to 300 GHz. It specifies the maximum exposure limit of 1.6 W/kg as averaged over any 1 gram of tissue for portable devices being used within 20 cm of the user in the uncontrolled environment. IEEE Std 1528™-2003: IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques. KDB 447498 D01 Mobile Portable RF Exposure v05r02: Mobile and Portable Device RF Exposure Procedures and Equipment Authorization Policies KDB 616217 D04 SAR for laptop and tablets v01: SAR Evaluation Considerations for Laptop, Notebook, Netbook and Tablet Computers KDB865664 D01 SAR measurement 100 MHz to 6 GHz v01r03: SAR Measurement Requirements for 100 MHz to 6 GHz KDB865664 D02 SAR Reporting v01: RF Exposure Compliance Reporting and Documentation Considerations KDB248227: SAR measurement procedures for 802.112abg transmitters FCC Part 2.1093 Radiofrequency Radiation Exposure Evaluation: Portable Devices Report No.: TRE1412004204 Page 4 of 51 2. SUMMARY 2.1. Client Information Applicant: SHENZHEN ZOWEE TECHNOLOGY CO.,LTD Address: Science &Technology Industrial Park of Privately Owned Enterprises, Pingshan, Xili, Nanshan District, Shenzhen, PR CHINA Manufacturer: SHENZHEN ZOWEE TECHNOLOGY CO.,LTD Address: Science &Technology Industrial Park of Privately Owned Enterprises, Pingshan, Xili, Nanshan District, Shenzhen, PR CHINA 2.2. Product Description Name of EUT Internet Tablet Trade Mark: TMAX,APEX,DOPO,NOBIS,DAGE,NUVISION Model No.: M7859 Listed Model(s): NBW7800 C,NBW7805 C,NBW7850 C,DPM7808, DPM7828, DPM7858 ,TM7806 ,TM7854 ,DPW785A, DPW785B Power supply: DC 3.7V From internal battery Adapter information: Mode: JK050200-S04USA Input:AC 100-240V 50/60Hz 0.5A Output:DC 5.0V 2000mA WIFI Supported type: 802.11b/802.11g/802.11n(H20)/802.11n(H40) Modulation: 802.11b: DSSS (DBPSK / DQPSK / CCK) 802.11g/n(H20)/n(H40): OFDM (BPSK / QPSK / 16QAM / 64QAM) Operation frequency: 802.11b/g/n(H20): 2412MHz~2462MHz 802.11n(H40): 2422MHz~2452MHz Channel number: 802.11b/g/n(H20): 11 802.11n(H40): 7 Channel separation: 5MHz Antenna type: Internal Antenna A…

Text truncated - open the document above for the full version.

The test r It is not pe Report R FCC ID ... Applican Address .. Manufactu Address.. Test item Trade Ma Model/Typ Listed Mo Standard Date of re Date of te Date of is Result .... Compiled ( position + Supervise ( position+ Approved ( position + Testing L Address .. Shenzhen This publi Huatongw Shenzhen for damag context. report merely ermitted to c Reference No .................... t’s name ..... .................... urer.............. .................... m description ark ................ pe reference odel(s) .......... d ................... eceipt of test esting............ sue............ .............. ...... by +printednam ed by +printed nam by +printed nam Laboratory N .................... n Huatongw cation may b wei Internatio n Huatongwe ges resulting y correspond opy extracts o. ................. .................... .................... .................... .................... .................... n ................. .................... e ................... .................... .................... sample...... .................. ..................... .................. e+signature) me+signature me+signature Name .......... .................... wei Internatio be reproduce onal Inspectio ei Internation from the rea ds to the test of these te s TES ... : TRE1 ... : 2AAP ... : SHEN .... : Scie n Owne CHIN .....: SHEN ......: Scie n Owne CHIN ... : Inter .... : TMAX .... : M785 .... : NB W DPM ... : FCC .....: Dec 0 ......: Dec ......: Dec 2 ......: PASS ) ... : File a e) .. : Proje e) .. : RF M ... : Shen .... : Bldg 3 China onal Inspec ed in whole o on Co., Ltd is nal Inspection ader's interpr sample. st result witho ST RE 1412004203 P6M7859 NZHEN ZO W nce &Techno ed Enterpris NA NZHEN ZO W nce &Techno ed Enterpris NA rnet Tablet AX ,APEX,DO 59 W7800 C ,NB M7858 ,TM78 CFR Title 4 09, 2014 10, 2014- D e 24, 2014 S administrator ect Engineer Manager Han nzhen Huato 3, Hongfa Hi a ction Co., Ltd or in part for s acknowled n Co., Ltd tak retation of th out the writte EPOR 3 WEE TECHN ology Industr es, Pingshan WEE TECHN ology Industr es, Pingshan OPO,NOBIS, W7805 C,N B 806 ,TM7854 47 Part 15 Su ec 24, 2014 rs Any Yang Lion Cai ns Hu ongwei Inter i-tech Industr d. All rights non-commer ged as copy kes no respo e reproduce en permission RT R/C......... NOLOGY CO rial Park of P n, Xili, Nansh NOLOGY CO rial Park of P n, Xili, Nansh DAGE,NUVI BW7850 C ,D ,DPW785A, ubpart C Se rnational Ins rial Park, Ge reserved. rcial purpose right owner a onsibility for a d material du n of the test ....:86151 O.,LTD Privately han District, O.,LTD Privately han District, ISION DPM7808, D , DPW785B ection 15.247 spection Co enyu Road, S es as long as and source o and will not a ue to its plac laboratory. Shenzhen, P Shenzhen, P DPM7828, 7 o., Ltd Shenzhen, s the Shenzh of the materia assume liabil cement and PR PR hen al. lity Report No: TRE1412004203 Page: 2 of 30 Contents 1. APPLICABLE STANDARDS AND TEST DESCRIPTION 3 1.1. Applicable Standards 3 1.2. Test Description 3 2. SUMMARY 4 2.1. Client Information 4 2.2. Product Description 4 2.3. Operation state 4 2.4. EUT configuration 5 2.5. Modifications 5 3. TEST ENVIRONMENT 6 3.1. Address of the test laboratory 6 3.2. Test Facility 6 3.3. Equipments Used during the Test 7 3.4. Environmental conditions 8 3.5. Statement of the measurement uncertainty 8 4. TEST CONDITIONS AND RESULTS 9 4.1. Antenna requirement 9 4.2. Conducted Emission (AC Main) 10 4.3. Conducted Peak Output Power 13 4.4. Power Spectral Density 14 4.5. 6dB bandwidth 16 4.6. Restricted band (Conducted) 18 4.7. Band edge and Spurious Emission (conducted) 20 4.8. Spurious Emission (radiated) 24 5. TEST SETUP PHOTOS OF THE EUT 2 9 6. EXTERNAL AND INTERNAL PHOTOS OF THE EUT 3 0 Report No: TRE1412004203 Page: 3 of 30 1. APPLICABLE STANDARDS AND TEST DESCRIPTION 1.1. Applicable Standards The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. ANSI C63.10-2003: American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 V03R02: Guidance for Performing Compliance Measurements on Digital Transmission Systems (DTS) 1.2. Test Description Report Section Test Item FCC Rule Result 4.1 Antenna requirement 15.203/15.247 (c) Pass 4.2 Line Conducted Emission (AC Main) 15.207 Pass 4.3 Conducted Peak Output Power 15.247 (b)(3) Pass 4.4 Power Spectral Density 15.247 (e) Pass 4.5 6dB Bandwidth 15.247 (a)(2) Pass 4.6 Restricted band 15.247(d)/15.205 Pass 4.7/4.8 Spurious Emission 15.247(d)/15.209 Pass Remark: The measurement uncertainty is not included in the test result. Report No: TRE1412004203 Page: 4 of 30 2. SUMMARY 2.1. Client Information Applicant: SHENZHEN ZOWEE TECHNOLOGY CO.,LTD Address: Science &Technology Industrial Park of Privately Owned Enterprises, Pingshan, Xili, Nanshan District, Shenzhen, PR CHINA Manufacturer: SHENZHEN ZOWEE TECHNOLOGY CO.,LTD Address: Science &Technology Industrial Park of Privately Owned Enterprises, Pingshan, Xili, Nanshan District, Shenzhen, PR CHINA 2.2. Product Description Name of EUT Internet Tablet Trade Mark: TMAX,APEX,DOPO,NOBIS,DAGE,NUVISION Model No.: M7859 Listed Model(s): NBW7800 C,NBW7805 C,NBW7850 C,DPM7808, DPM7828, DPM7858 ,TM7806 ,TM7854 ,DPW785A, DPW785B Power supply: DC 3.7V From internal battery Adapter information: Mode: JK050200-S04USA Input:AC 100-240V 50/60Hz 0.5A Output:DC 5.0V 2000mA Bluetooth Version: Supported BT4.0 Modulation: GFSK Operation frequency: 2402MHz~2480MHz Channel number: 40 Channel separation: 2MHz Antenna type: Internal Antenna Antenna gain: 1.47dBi 2.3. Operation state  Test frequency list According to section 15.31(m), regards to the operating frequency range over 10 MHz, must select three channel which were tested. the Lowest frequency, the middle frequency, and the highest frequency of channel were selected to perform the test, ple…

Text truncated - open the document above for the full version.

The test r It is not pe Report R FCC ID ... Applican Address .. Manufactu Address.. Test item Trade Ma Model/Typ Listed Mo Standard Date of re Date of te Date of is Result .... Compiled ( position + Supervise ( position+ Approved ( position + Testing L Address .. Shenzhen This publi Huatongw Shenzhen for damag context. report merely ermitted to c Reference No .................... t’s name ..... .................... urer.............. .................... m description ark ................ pe reference odel(s) .......... d ................... eceipt of test esting............ sue............ .............. ...... by +printednam ed by +printed nam by +printed nam Laboratory N .................... n Huatongw cation may b wei Internatio n Huatongwe ges resulting y correspond opy extracts o. ................. .................... .................... .................... .................... .................... n ................. .................... e ................... .................... .................... sample...... .................. ..................... .................. e+signature) me+signature me+signature Name .......... .................... wei Internatio be reproduce onal Inspectio ei Internation from the rea ds to the test of these te s TES ... : TRE1 ... : 2AAP ... : SHEN .... : Scie n Owne CHIN .....: SHEN ......: Scie n Owne CHIN ... : Inter .... : TMAX .... : M785 .... : NB W DPM ... : FCC .....: Dec 0 ......: Dec ......: Dec 2 ......: PASS ) ... : File a e) .. : Proje e) .. : RF M ... : Shen .... : Bldg 3 China onal Inspec ed in whole o on Co., Ltd is nal Inspection ader's interpr sample. st result witho ST RE 1412004201 P6M7859 NZHEN ZOW nce &Techno ed Enterpris NA NZHEN ZOW nce &Techno ed Enterpris NA rnet Tablet AX ,APEX,DO 59 W7800 C ,NB M7858 ,TM78 CFR Title 4 09, 2014 10, 2014- D e 24, 2014 S administrator ect Engineer Manager Han nzhen Huato 3, Hongfa Hi a ction Co., Ltd or in part for s acknowled n Co., Ltd tak retation of th out the writte EPOR WEE TECHN ology Industr es, Pingshan WEE TECHN ology Industr es, Pingshan OPO,NOBIS, W7805 C,N B 806 ,TM7854 47 Part 15 Su ec 24, 2014 rs Any Yang Lion Cai ns Hu ongwei Inter i-tech Industr d. All rights non-commer ged as copy kes no respo e reproduce en permission RT R/C......... NOLOGY CO rial Park of P n, Xili, Nansh NOLOGY CO rial Park of P n, Xili, Nansh DAGE,NUVI BW7850 C ,D ,DPW785A, ubpart C Se rnational Ins rial Park, Ge reserved. rcial purpose right owner a onsibility for a d material du n of the test ....:86151 O.,LTD Privately han District, O.,LTD Privately han District, ISION DPM7808, D , DPW785B ection 15.247 spection Co enyu Road, S es as long as and source o and will not a ue to its plac laboratory. Shenzhen, P Shenzhen, P DPM7828, 7 o., Ltd Shenzhen, s the Shenzh of the materia assume liabil cement and PR PR hen al. lity Report No: TRE1412004201 Page: 2 of 49 Contents 1. APPLICABLE STANDARDS AND TEST DESCRIPTION 3 1.1. Applicable Standards 3 1.2. Test Description 3 2. SUMMARY 4 2.1. Client Information 4 2.2. Product Description 4 2.3. Operation state 5 2.4. EUT configuration 5 2.5. Modifications 5 3. TEST ENVIRONMENT 6 3.1. Address of the test laboratory 6 3.2. Test Facility 6 3.3. Equipments Used during the Test 7 3.4. Environmental conditions 8 3.5. Statement of the measurement uncertainty 8 4. TEST CONDITIONS AND RESULTS 9 4.1. Antenna requirement 9 4.2. Conducted Emission (AC Main) 10 4.3. Conducted Peak Output Power 13 4.4. Power Spectral Density 14 4.5. 6dB bandwidth 17 4.6. Restricted band (Conducted) 20 4.7. Band edge and Spurious Emission (conducted) 25 4.8. Spurious Emission (radiated) 38 5. TEST SETUP PHOTOS OF THE EUT 4 4 6. EXTERNAL AND INTERNAL PHOTOS OF THE EUT 4 5 Report No: TRE1412004201 Page: 3 of 49 1. APPLICABLE STANDARDS AND TEST DESCRIPTION 1.1. Applicable Standards The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. ANSI C63.10-2003: American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 V03R02: Guidance for Performing Compliance Measurements on Digital Transmission Systems (DTS) 1.2. Test Description Report Section Test Item FCC Rule Result 4.1 Antenna requirement 15.203/15.247 (c) Pass 4.2 Line Conducted Emission (AC Main) 15.207 Pass 4.3 Conducted Peak Output Power 15.247 (b)(3) Pass 4.4 Power Spectral Density 15.247 (e) Pass 4.5 6dB Bandwidth 15.247 (a)(2) Pass 4.6 Restricted band 15.247(d)/15.205 Pass 4.7/4.8 Spurious Emission 15.247(d)/15.209 Pass Remark: The measurement uncertainty is not included in the test result. Report No: TRE1412004201 Page: 4 of 49 2. SUMMARY 2.1. Client Information Applicant: SHENZHEN ZOWEE TECHNOLOGY CO.,LTD Address: Science &Technology Industrial Park of Privately Owned Enterprises, Pingshan, Xili, Nanshan District, Shenzhen, PR CHINA Manufacturer: SHENZHEN ZOWEE TECHNOLOGY CO.,LTD Address: Science &Technology Industrial Park of Privately Owned Enterprises, Pingshan, Xili, Nanshan District, Shenzhen, PR CHINA 2.2. Product Description Name of EUT Internet Tablet Trade Mark: TMAX,APEX,DOPO,NOBIS,DAGE,NUVISION Model No.: M7859 Listed Model(s): NBW7800 C,NBW7805 C,NBW7850 C,DPM7808, DPM7828, DPM7858 ,TM7806 ,TM7854 ,DPW785A, DPW785B Power supply: DC 3.7V From internal battery Adapter information: Mode: JK050200-S04USA Input:AC 100-240V 50/60Hz 0.5A Output:DC 5.0V 2000mA WIFI Supported type: 802.11b/802.11g/802.11n(H20)/802.11n(H40) Modulation: 802.11b: DSSS (DBPSK / DQPSK / CCK) 802.11g/n(H20)/n(H40): OFDM (BPSK / QPSK / 16QAM / 64QAM) Operation frequency: 802.11b/g/n(H20): 2412MHz~2462MHz 802.11n(H40): 2422MHz~2452MHz Channel number: 802.11b/g/n(H20): 11 802.11n(H40): 7 Channel separation: 5MHz Antenna type: Internal Antenna Antenna gain: 1.47dBi Report No: TRE1412004201 Page: 5 of 49 2.3. Operation state  Test frequency list According to se…

Text truncated - open the document above for the full version.

Report N 5. Tes Radiated Conduct e o: TRE1 4 st Setup Emission ed Emission ( 412004201 p Photo (AC Mains) os of thee EUT Page: : 44 of 49