2AAPLCQL1523-BBluetooth Speaker

CQL1523‐B (PBT512)Twins Bluetooth Speaker Instruction Manual (Read before proceeding) Power: z Works on internal rechargeable Lithium battery. Please charge your speakers fully before first use. To charge the battery : Using a Micro USB cable (included), insert the jack into ”Charging” jack located at the back of the units and then plug the USB connector into the USB port on a computer for charging. Note: The USB connection can be used for charging only without data exchange. z A red light aside will indicate the charging situation. When battery is full, the red light will turn off automatically. To Use it as a PairSpeaker z Turn on both units by sliding the switch on the back to ON.The blue indicator lights of two units will flash quickly. z After 2 seconds, a tone will be heard and the two units will be connected to each other automatically. z After paired to each other, the indicator light on the main unit will flash quickly and the sub unit slowly. z Search the Bluetooth speaker device name “SB‐04” on your mobile phone, connect it via the option menu of your mobile device, pairing mode is 0000 if any is required. The blue light on the main unit will light turn solid blue after the pair is completed and the blue light on the sub unit will remain flash slowly. z Start playing music on your device. Keep the speakers within 33feet (10m) of each other. Enjoy your music from both speakers. Note: the pair speakers cannot be connected to your Bluetooth individually. They have to work as a pair to be connected with the Bluetooth on your phone. Caution: z This is not a toy. Please keep away fromchildren. z Please keep away from water / heat. z Low power may cause poor connection even no working of Bluetooth. z Turn off the unit when not used. FCC Statement z Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. z This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: z -- Reorient or relocate the receiving antenna. z -- Increase the separation between the equipment and receiver. z -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z -- Consult the dealer or an experienced radio/TV technician for help z This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

CQL1523‐B (PBT512)Twins Bluetooth Speaker Instruction Manual (Read before proceeding) Power: z Works on internal rechargeable Lithium battery. Please charge your speakers fully before first use. To charge the battery : Using a Micro USB cable (included), insert the jack into ”Charging” jack located at the back of the units and then plug the USB connector into the USB port on a computer for charging. Note: The USB connection can be used for charging only without data exchange. z A red light aside will indicate the charging situation. When battery is full, the red light will turn off automatically. To Use it as a PairSpeaker z Turn on both units by sliding the switch on the back to ON.The blue indicator lights of two units will flash quickly. z After 2 seconds, a tone will be heard and the two units will be connected to each other automatically. z After paired to each other, the indicator light on the main unit will flash quickly and the sub unit slowly. z Search the Bluetooth speaker device name “SB‐04” on your mobile phone, connect it via the option menu of your mobile device, pairing mode is 0000 if any is required. The blue light on the main unit will light turn solid blue after the pair is completed and the blue light on the sub unit will remain flash slowly. z Start playing music on your device. Keep the speakers within 33feet (10m) of each other. Enjoy your music from both speakers. Note: the pair speakers cannot be connected to your Bluetooth individually. They have to work as a pair to be connected with the Bluetooth on your phone. Caution: z This is not a toy. Please keep away fromchildren. z Please keep away from water / heat. z Low power may cause poor connection even no working of Bluetooth. z Turn off the unit when not used. FCC Statement z Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. z This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: z -- Reorient or relocate the receiving antenna. z -- Increase the separation between the equipment and receiver. z -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z -- Consult the dealer or an experienced radio/TV technician for help z This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

CQL1523‐B (PBT512)Twins Bluetooth Speaker Instruction Manual (Read before proceeding) Power: z Works on internal rechargeable Lithium battery. Please charge your speakers fully before first use. To charge the battery : Using a Micro USB cable (included), insert the jack into ”Charging” jack located at the back of the units and then plug the USB connector into the USB port on a computer for charging. Note: The USB connection can be used for charging only without data exchange. z A red light aside will indicate the charging situation. When battery is full, the red light will turn off automatically. To Use it as a PairSpeaker z Turn on both units by sliding the switch on the back to ON.The blue indicator lights of two units will flash quickly. z After 2 seconds, a tone will be heard and the two units will be connected to each other automatically. z After paired to each other, the indicator light on the main unit will flash quickly and the sub unit slowly. z Search the Bluetooth speaker device name “SB‐04” on your mobile phone, connect it via the option menu of your mobile device, pairing mode is 0000 if any is required. The blue light on the main unit will light turn solid blue after the pair is completed and the blue light on the sub unit will remain flash slowly. z Start playing music on your device. Keep the speakers within 33feet (10m) of each other. Enjoy your music from both speakers. Note: the pair speakers cannot be connected to your Bluetooth individually. They have to work as a pair to be connected with the Bluetooth on your phone. Caution: z This is not a toy. Please keep away fromchildren. z Please keep away from water / heat. z Low power may cause poor connection even no working of Bluetooth. z Turn off the unit when not used. FCC Statement z Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. z This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: z -- Reorient or relocate the receiving antenna. z -- Increase the separation between the equipment and receiver. z -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z -- Consult the dealer or an experienced radio/TV technician for help z This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

CQL1523‐B (PBT512)Twins Bluetooth Speaker Instruction Manual (Read before proceeding) Power: z Works on internal rechargeable Lithium battery. Please charge your speakers fully before first use. To charge the battery : Using a Micro USB cable (included), insert the jack into ”Charging” jack located at the back of the units and then plug the USB connector into the USB port on a computer for charging. Note: The USB connection can be used for charging only without data exchange. z A red light aside will indicate the charging situation. When battery is full, the red light will turn off automatically. To Use it as a PairSpeaker z Turn on both units by sliding the switch on the back to ON.The blue indicator lights of two units will flash quickly. z After 2 seconds, a tone will be heard and the two units will be connected to each other automatically. z After paired to each other, the indicator light on the main unit will flash quickly and the sub unit slowly. z Search the Bluetooth speaker device name “SB‐04” on your mobile phone, connect it via the option menu of your mobile device, pairing mode is 0000 if any is required. The blue light on the main unit will light turn solid blue after the pair is completed and the blue light on the sub unit will remain flash slowly. z Start playing music on your device. Keep the speakers within 33feet (10m) of each other. Enjoy your music from both speakers. Note: the pair speakers cannot be connected to your Bluetooth individually. They have to work as a pair to be connected with the Bluetooth on your phone. Caution: z This is not a toy. Please keep away fromchildren. z Please keep away from water / heat. z Low power may cause poor connection even no working of Bluetooth. z Turn off the unit when not used. FCC Statement z Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. z This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: z -- Reorient or relocate the receiving antenna. z -- Increase the separation between the equipment and receiver. z -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z -- Consult the dealer or an experienced radio/TV technician for help z This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

CQL1523‐B (PBT512)Twins Bluetooth Speaker Instruction Manual (Read before proceeding) Power: z Works on internal rechargeable Lithium battery. Please charge your speakers fully before first use. To charge the battery : Using a Micro USB cable (included), insert the jack into ”Charging” jack located at the back of the units and then plug the USB connector into the USB port on a computer for charging. Note: The USB connection can be used for charging only without data exchange. z A red light aside will indicate the charging situation. When battery is full, the red light will turn off automatically. To Use it as a PairSpeaker z Turn on both units by sliding the switch on the back to ON.The blue indicator lights of two units will flash quickly. z After 2 seconds, a tone will be heard and the two units will be connected to each other automatically. z After paired to each other, the indicator light on the main unit will flash quickly and the sub unit slowly. z Search the Bluetooth speaker device name “SB‐04” on your mobile phone, connect it via the option menu of your mobile device, pairing mode is 0000 if any is required. The blue light on the main unit will light turn solid blue after the pair is completed and the blue light on the sub unit will remain flash slowly. z Start playing music on your device. Keep the speakers within 33feet (10m) of each other. Enjoy your music from both speakers. Note: the pair speakers cannot be connected to your Bluetooth individually. They have to work as a pair to be connected with the Bluetooth on your phone. Caution: z This is not a toy. Please keep away fromchildren. z Please keep away from water / heat. z Low power may cause poor connection even no working of Bluetooth. z Turn off the unit when not used. FCC Statement z Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. z This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: z -- Reorient or relocate the receiving antenna. z -- Increase the separation between the equipment and receiver. z -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z -- Consult the dealer or an experienced radio/TV technician for help z This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

CQL1523‐B (PBT512)Twins Bluetooth Speaker Instruction Manual (Read before proceeding) Power: z Works on internal rechargeable Lithium battery. Please charge your speakers fully before first use. To charge the battery : Using a Micro USB cable (included), insert the jack into ”Charging” jack located at the back of the units and then plug the USB connector into the USB port on a computer for charging. Note: The USB connection can be used for charging only without data exchange. z A red light aside will indicate the charging situation. When battery is full, the red light will turn off automatically. To Use it as a PairSpeaker z Turn on both units by sliding the switch on the back to ON.The blue indicator lights of two units will flash quickly. z After 2 seconds, a tone will be heard and the two units will be connected to each other automatically. z After paired to each other, the indicator light on the main unit will flash quickly and the sub unit slowly. z Search the Bluetooth speaker device name “SB‐04” on your mobile phone, connect it via the option menu of your mobile device, pairing mode is 0000 if any is required. The blue light on the main unit will light turn solid blue after the pair is completed and the blue light on the sub unit will remain flash slowly. z Start playing music on your device. Keep the speakers within 33feet (10m) of each other. Enjoy your music from both speakers. Note: the pair speakers cannot be connected to your Bluetooth individually. They have to work as a pair to be connected with the Bluetooth on your phone. Caution: z This is not a toy. Please keep away fromchildren. z Please keep away from water / heat. z Low power may cause poor connection even no working of Bluetooth. z Turn off the unit when not used. FCC Statement z Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. z This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: z -- Reorient or relocate the receiving antenna. z -- Increase the separation between the equipment and receiver. z -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z -- Consult the dealer or an experienced radio/TV technician for help z This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

Sure Wave (HongKong) Limited Letter of Authorization Company: Sure Wave (HongKong) Limited Address: A-703, Building 2, Tianan Cyber Park, HuangGe North Road, LongGang District, Shenzhen 518172, P.R. China Product Name: Bluetooth Speaker Model Number: CQL1523-B, PBT512 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, CA 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. This shall include the following: • Testing • Approval applications (includes complete product documentation package, including Confidential information) and procedures • Payment of approval fees We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, CA 94566, USA, is allowed to forward all information related to the approval project to the applied notified body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Emma Lee Date: 2015.12.8 Title: Senior Sales Executive Signature of applicant:

Sure Wave (HongKong) Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2015.12.8 Subject; Request for Confidentiality FCC ID: 2AAPLCQL1523-B To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. • Schematic Diagram • Block Diagram • Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Emma Lee Title: Senior Sales Executive Email: [email protected]

Sure Wave (HongKong) Limited Letter of Authorization Company: Sure Wave (HongKong) Limited Address: A-703, Building 2, Tianan Cyber Park, HuangGe North Road, LongGang District, Shenzhen 518172, P.R. China Product Name: Bluetooth Speaker Model Number: CQL1523-B, PBT512 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, CA 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. This shall include the following: • Testing • Approval applications (includes complete product documentation package, including Confidential information) and procedures • Payment of approval fees We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, CA 94566, USA, is allowed to forward all information related to the approval project to the applied notified body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Emma Lee Date: 2015.12.8 Title: Senior Sales Executive Signature of applicant:

Sure Wave (HongKong) Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2015.12.8 Subject; Request for Confidentiality FCC ID: 2AAPLCQL1523-B To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. • Schematic Diagram • Block Diagram • Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Emma Lee Title: Senior Sales Executive Email: [email protected]

Sure Wave (HongKong) Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2015.12.8 Subject; Request for Confidentiality FCC ID: 2AAPLCQL1523-B To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. • Schematic Diagram • Block Diagram • Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Emma Lee Title: Senior Sales Executive Email: [email protected]

Model: CQL1523-B External Photos

Model: CQL1523-B External Photos

Model: CQL1523-B External Photos

LABEL ARTWORK AND LOCATION Label size: L*W=32*28mm Model No.: CQL1523-B Input: DC 5V FCC ID: 2AAPLCQL1523-B Made in China This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference

LABEL ARTWORK AND LOCATION Label size: L*W=32*28mm Model No.: CQL1523-B Input: DC 5V FCC ID: 2AAPLCQL1523-B Made in China This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference

LABEL ARTWORK AND LOCATION Label size: L*W=32*28mm Model No.: CQL1523-B Input: DC 5V FCC ID: 2AAPLCQL1523-B Made in China This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference

LABEL ARTWORK AND LOCATION Label size: L*W=32*28mm Model No.: CQL1523-B Input: DC 5V FCC ID: 2AAPLCQL1523-B Made in China This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference

LABEL ARTWORK AND LOCATION Label size: L*W=32*28mm Model No.: CQL1523-B Input: DC 5V FCC ID: 2AAPLCQL1523-B Made in China This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference

Model: CQL1523-B Internal Photos

Model: CQL1523-B Internal Photos

Model: CQL1523-B Internal Photos

Model: CQL1523-B Internal Photos

Model: CQL1523-B Internal Photos

Model: CQL1523-B Internal Photos

Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com TEST REPORT FCC ID: 2AAPLCQL1523-B Product: Bluetooth Speaker Model No.: CQL1523-B Additional Model: PBT512 Trade Mark: SURE Report No.: TCT151130E011 Issued Date: Dec. 04, 2015 Issued for : Sure Wave (HongKong) Limited A-703, Building 2, Tianan Cyber Park, HuangGe North Road, LongGang District, Shenzhen 518172, P.R. China. Issued By: Shenzhen Tongce Testing Lab. 1F, Leinuo Watch Building, Fuyong Town, Baoan Dist, Shenzhen, China TEL: +86-755-27673339 FAX: +86-755-27673332 Note: This report shall not be reproduced except in full, without the written approval of Shenzhen Tongce Testing Lab. This document may be altered or revised by Shenzhen Tongce Testing Lab. personnel only, and shall be noted in the revision section of the document. The test results in the report only apply to the tested sample. Report No.: TCT151130E011 Page 2 of 45 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com TABLE OF CONTENTS 1. Test Certification....................................................................................... 3 2. Test Result Summary ............................................................................... 4 3. EUT Description ........................................................................................ 5 4. Genera Information ................................................................................... 6 4.1. Test environment and mode ................................................................................. 6 4.2. Description of Support Units ................................................................................ 6 5. Facilities and Accreditations ................................................................... 7 5.1. Facilities ................................................................................................................. 7 5.2. Location ................................................................................................................. 7 5.3. Measurement Uncertainty ..................................................................................... 7 6. Test Results and Measurement Data ...................................................... 8 6.1. Antenna requirement .......................................................................................…

Text truncated - open the document above for the full version.