
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
BT-1002 说明书 108192 - nomia bt speaker french 法文反面 size: 69*125 mm 正反单黑印 BT-1002 说明书 108192 - nomia bt speaker - english 英文正面 size: 69*125 mm 正反单黑印 BOM表编号: 客户LOGO: 数量:/ / / A-01 133-SM1002-001 NOMIA NOMIA NOMIA NOMIA NOMIA NOMIA Art.No.: SM-3888 Made in China Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Art.No.: SM-3888 Made in China Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
FCC INFORMATION (additional) Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
CHINA ELECTRONICS SHENZHEN COMPANY F35/F., ELECTRONICS SCIENCE AND TECHNOLOGY BUILDING, SHENNANZHONG ROAD, SHENZHEN, CHINA We, (the approval holder) Company name CHINA ELECTRONICS SHENZHEN COMPANY Address F35/F, ELECTRONICS SCIENCE AND TECHNOLOGY BUILDING, SHENNANZHONG ROAD, SHENZHEN, CHINA City Shenzhen Country China declare that the following representative (agent): Name (person) Kelly jiang Company name Shenzhen ECT Testing Technology Co;Ltd Address Room 808,Era Innovation Certer ,Xixiang gushu second road,Baoan district,Shenz hen city,China City Shenzhen Country China is hereby authorized to apply the following equipment for certification on our behalf: Product Description Bluetooth speaker Type or Model(s) SM-3888BK, SM-3888LM, SM-3888RD, SM-3888RYL, SM-3888WH, 7199-33BK, 7199-33LM, 7199-33RYL, BT-1002 Tradename or Brand(s) NOMIA, LANDO We also authorize Teleconformity (Mr. M. Koop, Manager Certification, Address: Rietven 31, 7534NH Enschede, the Netherlands) to apply and sign this application for certification, registration or filing on our behalf (as representative agent or certifier). Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Shenzhen 2014-05-26 Ashly.luo manager PDF created with pdfFactory Pro trial version www.pdffactory.com
Report No.: ECT2014E02045 Page 1 of 2 Rev: None Shenzhen ECT Testing Technology Co., Ltd. No Room 808,Era Innovation Certer, Xixiang gushu second road,Baoan district, Shenzhen city, China External View of EUT Model: BT-1002 Photo 1 Model: BT-1002 Photo 2 PDF created with pdfFactory Pro trial version www.pdffactory.com Report No.: ECT2014E02045 Page 2 of 2 Rev: None Shenzhen ECT Testing Technology Co., Ltd. No Room 808,Era Innovation Certer, Xixiang gushu second road,Baoan district, Shenzhen city, China Model: BT-1002 Photo 3 Model: BT-1002 Photo 4 PDF created with pdfFactory Pro trial version www.pdffactory.com
Label Label Location 2AAQFBT-1002 2AAQFBT-1002
Report No.: ECT2014E02045 Page 1 of 2 Rev: None Shenzhen ECT Testing Technology Co., Ltd. No Room 808,Era Innovation Certer, Xixiang gushu second road,Baoan district, Shenzhen city, China Internal View of EUT Model: BT-1002 Photo 1 Model: BT-1002 Photo 2 PDF created with pdfFactory Pro trial version www.pdffactory.com Report No.: ECT2014E02045 Page 2 of 2 Rev: None Shenzhen ECT Testing Technology Co., Ltd. No Room 808,Era Innovation Certer, Xixiang gushu second road,Baoan district, Shenzhen city, China Model: BT-1002 Photo 3 PDF created with pdfFactory Pro trial version www.pdffactory.com
FCC RF Exposure FCC ID: 2AAQFBT-1002 Frequency: 2402-2480 MHz (79 channels) Highest Mid-Channel Peak Power, Conducted: 7.93 dBm == 6.21 mW Antenna Gain: G = 0 dBi Peak, Radiated = 7.93 dBm + 0 dBi = 7.93 dBm = 6.21 mW SAR Test Exclusion Thresholds specified in KDB447498 Appendix A: Evaluation: The Calculated Radiated Peak output power is taken as worst case, and this emission level appears to be under the maximum allowed emission level at even the closest distance for 2.4G device specified in this table. Conclusion: The emitted power appears to be (far) below the required limit, so PASS.
Report No.: ECT2014E02045 Page 1 of 53 Rev: None Shenzhen ECT Testing Technology Co., Ltd. No Room 808,Era Innovation Certer, Xixiang gushu second road,Baoan district, Shenzhen city, China FCC Test Report Part 15 subpart C Client Information: Applicant : CHINA ELECTRONICS SHENZHEN COMPANY Applicant add.: F35/F, ELECTRONICS SCIENCE AND TECHNOLOGY BUILDING, SHENNANZHONG ROAD, SHENZHEN, CHINA EUT Information: EUT Name : BLUETOOTH SPEAKER Model No. : SM-3888BK, SM-3888LM, SM-3888RD, SM-3888RYL, SM-3888WH, 7199-33BK, 7199-33LM, 7199-33RYL, BT-1002 Brand Name : NOMIA, LANDO FCC ID : 2AAQFBT-1002 Prepared By: Shenzhen ECT Testing Technology Co., Ltd. Add. : No Room 808,Era Innovation Certer, Xixiang gushu second road, Baoan district, Shenzhen city, China Date of Receipt: May. 12, 2014 Date of Test: May. 13~ May. 19, 2014 Date of Issue: May. 20, 2014 Test Result: Pass Test procedure used: ANSI C63.4-2009 This device described above has been tested by Shenzhen ECT Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. *This test report must not be used by the client to claim product endorsement by any agency of the U.S. government. Reviewed by: Approved by: Nancy Xu kelly Jiang PDF created with pdfFactory Pro trial version www.pdffactory.com Report No.: ECT2014E02045 Page 2 of 53 Rev: None Shenzhen ECT Testing Technology Co., Ltd. No Room 808,Era Innovation Certer, Xixiang gushu second road,Baoan district, Shenzhen city, China 1 Contents Page COVER PAGE 1 CONTENTS.....................................................................................................................................................2 2 TEST SUMMARY............................................................................................................................................4 2.1 COMPLIANCE WITH FCC PART 15 SUBPART C................................................................................................4 2.2 MEASUREMENT UNCERTAINTY......................................................................................................................4 3 GENERAL INFORMATION.............................................................................................................................5 3.1 GENERAL DESCRIPTION OF EUT...................................................................................................................5 3.2 DESCRIPTION OF TEST CONDITIONS...............................................................................................................7 3.3 EUT PERIPHERAL LIST.................................................................................................................................8 3.4 TEST PERIPHERAL LIST................................................................................................................................8 4 EQUIPMENTS LIST FOR ALL TEST ITEMS...................................................................................................9 5 TEST RESULT..............................................................................................................................................10 5.1 ANTENNA REQUIREMENT............................................................................................................................10 5.1.1 Standard requirement.......................................................................................................................10 5.1.2 EUT Antenna...................................................................................................................................10 5.2 CONDUCTION EMISSIONS MEASUREMENT.....................................................................................................11 5.2.1 Applied procedures / Limit................................................................................................................11 5.2.2 Test procedure.................................................................................................................................11 5.2.3 Test results......................................................................................................................................12 5.3 RADIATED EMISSIONS MEASUREMENT.........................................................................................................14 5.3.1 Applied procedures / Limit................................................................................................................14 5.3.2 Test procedure.................................................................................................................................14 5.3.3 Test Result.......................................................................................................................................15 5.3.4 TEST RESULTS (Restricted Bands Requirements)..........................................................................20 5.4 BANDWIDTH TEST.................................................................................................................................21 5.4.1 Applied procedures / Limit................................................................................................................21 5.4.2 Test procedure.................................................................................................................................21 5.4.3 Deviation from standard...................................................................................................................21 5.4.4 Test setup........................................................................................................................................21 5.4.5 Test results......................................................................................................................................22 5.5 CARRIER FREQUENCIES SEPARATED........................…
Text truncated - open the document above for the full version.
Report No.: ECT2014E02045 Page 1 of 2 Rev: None Shenzhen ECT Testing Technology Co., Ltd. No Room 808,Era Innovation Certer, Xixiang gushu second road,Baoan district, Shenzhen city, China Test Setup Photograph Conducted Measurement Photos PDF created with pdfFactory Pro trial version www.pdffactory.com Report No.: ECT2014E02045 Page 2 of 2 Rev: None Shenzhen ECT Testing Technology Co., Ltd. No Room 808,Era Innovation Certer, Xixiang gushu second road,Baoan district, Shenzhen city, China Radiated Measurement Photos 30MHz-1GHz 1GHz-25GHz PDF created with pdfFactory Pro trial version www.pdffactory.com
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 6.21 mW |

BLUETOOTH SPEAKER
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
BLUETOOTH SPEAKER
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
BLUETOOTH SPEAKER
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
BLUETOOTH SPEAKER
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
BLUETOOTH SPEAKER
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter