2AAQFPH-BT1000Bluetooth Speaker

4 3.0+EDR 3

FCC INFORMATION (additional) Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.

x x x

CHINA ELECTRONICS SHENZHEN COMPANY FCC Short Term Confidentiality Request Number: CF313 Version: V01 Date: 21-05-2012 (With Short term confidentiality, a period of max. 180 days on certain additional exhibits are possible, such as internal/external photos, user manual can test setup photosbet. After expiration of the confidentiality period, these additional exhibits for short term confidentiality become visible in the FCC database for the internet public.) To: Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company nameCHINA ELECTRONICS SHENZHEN COMPANY AddressF35/F., Electronics Science & Technology Building, Shennan Zhong Road CityShenzhen CountryChina request for this certification filing under: Grantee CodeProduct Number FCC ID:2AAQF PH-BT1000 to maintain short term confidentiality for a period of 180 days for the following documents submitted within this application: (please cross what is applicable, or add other documents, provide the file name and description) ExhibitFile NameDescription XInternal photospictures showing internal views of the EUT XExternal photospictures showing external views of the EUT XUser ManualInstructions and information for the end-user XTest Setup PhotosPhotos of conducted and radiated emission test setup Above materials crossed contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. The documents indicated as confidential above, are not publicly available elsewhere. Attestation: City and Country:Date:Name: (this must be a person) Function:Signature: (or official company stamp) Enschede, Netherlands2014-03-03M. Koop (authorized) Manager

CHINA ELECTRONICS SHENZHEN COMPANY FCC Short Term Confidentiality Request Number: CF313 Version: V01 Date: 21-05-2012 (With Short term confidentiality, a period of max. 180 days on certain additional exhibits are possible, such as internal/external photos, user manual can test setup photosbet. After expiration of the confidentiality period, these additional exhibits for short term confidentiality become visible in the FCC database for the internet public.) To: Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company nameCHINA ELECTRONICS SHENZHEN COMPANY AddressF35/F., Electronics Science & Technology Building, Shennan Zhong Road CityShenzhen CountryChina request for this certification filing under: Grantee CodeProduct Number FCC ID:2AAQF PH-BT1000 to maintain short term confidentiality for a period of 180 days for the following documents submitted within this application: (please cross what is applicable, or add other documents, provide the file name and description) ExhibitFile NameDescription XInternal photospictures showing internal views of the EUT XExternal photospictures showing external views of the EUT XUser ManualInstructions and information for the end-user XTest Setup PhotosPhotos of conducted and radiated emission test setup Above materials crossed contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. The documents indicated as confidential above, are not publicly available elsewhere. Attestation: City and Country:Date:Name: (this must be a person) Function:Signature: (or official company stamp) Enschede, Netherlands2014-03-03M. Koop (authorized) Manager

Report No.: ECT2014E02023 Page 1 of 2 Rev: None Shenzhen ECT Testing Technology Co., Ltd. No Room 808,Era Innovation Certer, Xixiang gushu second road,Baoan district, Shenzhen city, China External View of EUT Model: PH-BT1000 Photo 1 Model: PH-BT1000 Photo 2 Report No.: ECT2014E02023 Page 2 of 2 Rev: None Shenzhen ECT Testing Technology Co., Ltd. No Room 808,Era Innovation Certer, Xixiang gushu second road,Baoan district, Shenzhen city, China Model: PH-BT1000 Photo 3 Model: PH-BT1000 Photo 4

backside of the device: FCC ID: 2AAQFPH-BT1000

Report No.: ECT2014E02023 Page 1 of 2 Rev: None Shenzhen ECT Testing Technology Co., Ltd. No Room 808,Era Innovation Certer, Xixiang gushu second road,Baoan district, Shenzhen city, China Internal View of EUT Model: PH-BT1000 Photo 1 Model: PH-BT1000 Photo 2 Report No.: ECT2014E02023 Page 2 of 2 Rev: None Shenzhen ECT Testing Technology Co., Ltd. No Room 808,Era Innovation Certer, Xixiang gushu second road,Baoan district, Shenzhen city, China Model: PH-BT1000 Photo 3 Model: PH-BT1000 Photo 4

FCC RF Exposure FCC ID: 2AAQFPH-BT1000 Frequency: 2402-2480 MHz (79 channels) Highest Mid-Channel Peak Power, Conducted: 3.03 dBm == 2.01 mW Antenna Gain: G = 0 dBi Peak, Radiated = 3.03 dBm + 0 dBi = 3.03 dBm = 2.01 mW SAR Test Exclusion Thresholds specified in KDB447498 Appendix A: Evaluation: The Calculated Radiated Peak output power is taken as worst case, and this emission level appears to be under the maximum allowed emission level at even the closest distance for 2.4G device specified in this table. Conclusion: The emitted power appears to be (far) below the required limit, so PASS.

Report No.: ECT2014E02023 Page 1 of 53 Rev: None Shenzhen ECT Testing Technology Co., Ltd. No Room 808,Era Innovation Certer, Xixiang gushu second road,Baoan district, Shenzhen city, China FCC Test Report Part 15 subpart C Client Information: Applicant : CHINA ELECTRONICS SHENZHEN COMPANY Applicant add.: F35/F, ELECTRONICS SCIENCE AND TECHNOLOGY BUILDING, SHENNANZHONG ROAD, SHENZHEN, CHINA EUT Information: EUT Name : BLUETOOTH SPEAKER Model No. : PH-BT1000, BT-2005 Brand Name : photive FCC ID : 2AAQFPH-BT1000 Prepared By: Shenzhen ECT Testing Technology Co., Ltd. Add. : No Room 808,Era Innovation Certer, Xixiang gushu second road, Baoan district, Shenzhen city, China Date of Receipt: Feb. 20, 2014 Date of Test: Feb. 20~ Feb. 25, 2014 Date of Issue: Feb. 25, 2014 Te s t R e s u l t : Pass Test procedure used: ANSI C63.4-2009 This device described above has been tested by Shenzhen ECT Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. *This test report must not be used by the client to claim product endorsement by any agency of the U.S. government. Reviewed by: Approved by: Nancy Xu kelly Jiang Report No.: ECT2014E02023 Page 2 of 53 Rev: None Shenzhen ECT Testing Technology Co., Ltd. No Room 808,Era Innovation Certer, Xixiang gushu second road,Baoan district, Shenzhen city, China 1 Contents Page COVER PAGE 1 CONTENTS ...........................................................................................................................................................2 2 TEST SUMMARY ..................................................................................................................................................4 2.1 COMPLIANCE WITH FCC PART 15 SUBPART C .....................................................................................................4 2.2 MEASUREMENT UNCERTAINTY............................................................................................................................4 3 GENERAL INFORMATION ...................................................................................................................................5 3.1 GENERAL DESCRIPTION OF EUT ........................................................................................................................5 3.2 DESCRIPTION OF TEST CONDITIONS....................................................................................................................7 3.3 EUT PERIPHERAL LIST.......................................................................................................................................8 3.4 TEST PERIPHERAL LIST......................................................................................................................................8 4 EQUIPMENTS LIST FOR ALL TEST ITEMS .......................................................................................................9 5 TEST RESULT.....................................................................................................................................................10 5.1 ANTENNA REQUIREMENT..................................................................................................................................10 5.1.1 Standard requirement ............................................................................................................................10 5.1.2 EUT Antenna .........................................................................................................................................10 5.2 CONDUCTION EMISSIONS MEASUREMENT.........................................................................................................11 5.2.1 Applied procedures / Limit .....................................................................................................................11 5.2.2 Test procedure.......................................................................................................................................11 5.2.3 Test results ............................................................................................................................................12 5.3 RADIATED EMISSIONS MEASUREMENT..............................................................................................................14 5.3.1 Applied procedures / Limit .....................................................................................................................14 5.3.2 Test procedure.......................................................................................................................................14 5.3.3 Test Result .............................................................................................................................................15 5.3.4 TEST RESULTS (Restricted Bands Requirements)..............................................................................20 5.4 BANDWIDTH TEST.......................................................................................................................................21 5.4.1 Applied procedures / Limit .....................................................................................................................21 5.4.2 Test procedure.......................................................................................................................................21 5.4.3 Deviation from standard.........................................................................................................................21 5.4.4 Test setup ..............................................................................................................................................21 5.4.5 Test results ............................................................................................................................................22 5.5 CARRIER FREQUENC…

Text truncated - open the document above for the full version.

Report No.: ECT2014E02023 Page 1 of 2 Rev: None Shenzhen ECT Testing Technology Co., Ltd. No Room 808,Era Innovation Certer, Xixiang gushu second road,Baoan district, Shenzhen city, China Test Setup Photograph Conducted Measurement Photos Report No.: ECT2014E02023 Page 2 of 2 Rev: None Shenzhen ECT Testing Technology Co., Ltd. No Room 808,Era Innovation Certer, Xixiang gushu second road,Baoan district, Shenzhen city, China Radiated Measurement Photos 30MHz-1GHz 1GHz-25GHz