2AATL-6252B-UUBWIFI/Bluetooth MODULE

FN-LINK TECHNOLOGY LIMITED 1 PRODUCT SPECIFICATION 6252B-UUB Wi-Fi Dual-band 2T2R + Bluetooth 5.2 Combo Module Version:v1.5 FN-LINK TECHNOLOGY LIMITED 2 6252B-UUB Module Datasheet Customer: Customer P/N: Signature: Date: Office: 14th floor, Block B, phoenix zhigu, Xixiang Street, Baoan District, Shenzhen Factory: NO.8, Litong RD., Liuyang Economic & Technical Development Zone, Changsha, CHINA TEL:+86-755-2955-8186 Website:www.fn-link.com Ordering Information Part NO. Description FG6252BUUB-00 RTL8852BU-VS-CG,a/b/g/n/ac/ax,BLE5.2,2T2R,15X13mm,USB2.0 ，3 Antenna with shielding FG6252BUUB-01 RTL8852BU-VS-CG,a/b/g/n/ac/ax,BLE5.2,2T2R,15X13mm,USB2.0 ，3 Antenna ， no shielding FG6252BUUB-02 RTL8852BU-VS-CG,a/b/g/n/ac/ax,BLE5.2,2T2R,15X13mm,USB2.0 +PCM,3 Antenna with shielding FG6252BUUB-03 RTL8852BU-VS-CG,a/b/g/n/ac/ax,BLE5.2,2T2R,15X13mm,USB2.0 ，2 Antenna with shielding FG6252BUUB-04 RTL8852BU-CG,a/b/g/n/ac/ax,BLE5.2,2T2R,15X13mm,USB3.0 ，3 Antenna with shielding 6252B-UUB FN-LINK TECHNOLOGY LIMITED 3 CONTENTS 1. General Description ..................................................................................................5 1.1 Introduction ............................................................................................................5 1.2 Description .............................................................................................................5 2. Features......................................................................................................................6 3. Block Diagram ...........................................................................................................6 4. General Specification ................................................................................................7 4.1 2.4GHz RF Specification ........................................................................................7 4.2 5GHz RF Specification ...........................................................................................8 4.3 Bluetooth Specification......................................................................................... 10 5. ID setting information.............................................................................................. 10 6. Pin Definition ........................................................................................................... 11 6.1 Pin Outline ........................................................................................................... 11 6.2 Pin Definition details ............................................................................................ 11 7. Electrical Specifications ......................................................................................... 13 7.1 Power Supply DC Characteristics ........................................................................ 13 7.2 USB Bus during power on Sequence ................................................................... 14 8. Size reference .......................................................................................................... 15 8.1 Module Picture ..................................................................................................... 15 8.2 Marking Description ............................................................................................. 15 8.3 Physical Dimensions ............................................................................................ 16 8.4 Layout Recommendation ..................................................................................... 17 9. The Key Material List ............................................................................................... 17 10. Reference Design .................................................................................................. 18 11. Recommended Reflow Profile .............................................................................. 18 12. Package .................................................................................................................. 19 12.1 Reel.................................................................................................................... 19 12.2 Carrier Tape Detail ............................................................................................. 19 12.3 Packaging Detail ................................................................................................ 20 13. Moisture sensitivity ............................................................................................... 21 6252B-UUB FN-LINK TECHNOLOGY LIMITED 4 Revision History Version Date Contents of Revision Change Preparde Checked Approved V1.0 2022/01/12 New version FC SXL QJP V1.1 2022/03/10 Add size reference FC SXL QJP V1.2 2022/05/11 Modify Pin Definition FC SXL QJP V1.3 2022/06/08 Update Ordering Information Update The Key Material List Update packaging information FC SXL QJP V1.4 2022/06/17 Update Reference Design FC SXL QJP V1.5 2022/09/01 Add 2 Antenna version FC SXL QJP 6252B-UUB FN-LINK TECHNOLOGY LIMITED 5 1. General Description 1.1 Introduction The 6252B-UUB is a highly integrated module that support 2-stream 802.11ax solutions with Multi-user MIMO (Multiple-Input, Multiple-Output) with Wireless LAN (WLAN) and integrated Bluetooth 5 USB network interface controller. It combines a WLAN MAC, a 2T2R capable WLAN baseband, and RF in a single chip. The RTL8852BU-VS-CG provides a complete solution for a high-performance integrated wireless and Bluetooth device. This compact module is a total solution for a combination of Wi-Fi + BT technologies. The module is specifically developed for Smart phones and Portable devices. 1.2 Description Model Name 6252B-UUB Product Description Support Wi-Fi/Bluetooth functionalities Dimension L x W x H: 13 x 15 x 2.3 mm Wi-Fi Interface Support USB 2.0 BT Interface USB 2.0 Operating temperature -0°C to 70°C Storage temperature -40°C to 85°C 6252B-UUB FN-LINK TECHNOLOGY LIMITED 6 2. …

Text truncated - open the document above for the full version.

FN-LINK TECHNOLOGY LIMITED 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: FN-LINK TECHNOLOGY LIMITED Address: No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, China Product Name: WIFI/Bluetooth MODULE FCC ID: 2AATL-6252B-UUB Model(s): 6252B-UUB 2.911(d)(5)(i) Equipment Type We, FN-LINK TECHNOLOGY LIMITED certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Jim Hu Date: 1/22/2024 Title: General Manager Company name: FN-LINK TECHNOLOGY LIMITED NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

FN-LINK TECHNOLOGY LIMITED 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: FN-LINK TECHNOLOGY LIMITED Address: No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, China Product Name: WIFI/Bluetooth MODULE FCC ID: 2AATL-6252B-UUB Model(s): 6252B-UUB 2.911(d)(5)(ii) Applicant filing We, [FN-LINK TECHNOLOGY LIMITED] certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Jim Hu Date: 1/22/2024 Title: General Manager Company name: FN-LINK TECHNOLOGY LIMITED NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

FN-LINKTECHNOLOGYLIMITED * theapplicantmustdesignateacontactlocatedintheUnitedStatesforpurposesofactingasthe applicant’sagentforserviceofprocess,regardlessofwhethertheapplicantisadomesticorforeign entity.AnapplicantlocatedintheUnitedStatesmaydesignateitselfastheagentforserviceofprocess. U.S.AgentDesignationforServiceofProcess- CertificationAttestationLetter 1/23/2024 ATTN.:ReviewingEngineer FCCID:2AATL-6252B-UUB FRN:0022902761 Persection2.911(d)(7)oftheFCCrules,FN-LINKTECHNOLOGYLIMITED(“theapplicant”) certifiesthattheequipmentforwhichauthorizationissoughtisdesignatedtothefollowingU.S. agent*forserviceofprocess: CompanyName:JOCAustraliaInc. FRN:0033379421 PhysicalU.S.CompanyAddress:CASTLETONSTSTE665,CITYOFINDUSTRY,CA91748 UnitedStatesofAmerica Agentname:Benjamin.Smith/VicePresident AgentEmailAddress:[email protected] Tel:+1(626)3413408 Theabovecontactpersonacceptstheobligationforserviceofprocess. Theapplicantacceptstomaintainanagentfornolessthanoneyearafterthegranteehas terminatedallmarketingandimportationortheconclusionofanyCommission-related proceedinginvolvingtheequipment. ApplicantSigned: Signed: Printedname:JimHu Title:GeneralManager CompanyName:FN-LINKTECHNOLOGY LIMITED Date:1/23/2024 AgentSigned(ifdifferenttoApplicant): Signed: Printedname:Benjamin.Smith Title: VicePresident CompanyName:JOCAustraliaInc Date:1/30/2024

FN-LINK TECHNOLOGY LIMITED Authorization January 22, 2024 Company name: FN-LINK TECHNOLOGY LIMITED Address: No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, China Product Name: WIFI/Bluetooth MODULE FCC ID: 2AATL-6252B-UUB Model(s): 6252B-UUB We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Name Jim Hu Position Manager Company Name FN-LINK TECHNOLOGY LIMITED Address No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, CHINA Tel +8613538178944 Fax / Email [email protected]

FN-LINK TECHNOLOGY LIMITED Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-01-22 Subject; Request for Long Term Confidentiality FCC ID: 2AATL-6252B-UUB To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description Tune-up Procedure SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Signature: January 22, 2024 Name Jim Hu Position Manager Company Name FN-LINK TECHNOLOGY LIMITED Address No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, CHINA Tel +8613538178944 Fax / Email [email protected]

FCC Modular Approval Request To the FCC or FCC TCB handling this application Hereby we, Company (grantee) FN-LINK TECHNOLOGY LIMITED Addresss No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, CHINA City / ZIP / State / Country China request modular approval for the certification of our equipment within this application, identified by: FCC ID: 2AATL-6252B-UUB The table below contains justification for modular approval of this equipment. Requirement per DA 00-1407 Explanation from grantee 1. The modular transmitter must have its own RF shielding. Has RF shielding. 2.The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. The modular have buffered modulation/data inputs. 3. The modular transmitter must have its own power supply regulation. The modular transmitter have its own power supply regulation. 4.The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable).. This module is equipped with a Rob antenna, and the adapter is a non-standard SMA interface. Please refer to external photos for detailed information. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. This module can work independently of the fixture and is fixed to the public version for more convenient fixed frequency testing. 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: ??????????” or “Contains FCC ID: 2ATCG-BB810QI4A” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. Please refer to label sample exhibit - host labeling is described in integration manual 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. The required FCC rule has been fulfilled and all the instructions for the maintaining compliance have been clearly stated in the User Manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimetre wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. The MPE evaluation with 20cm distance restriction is submitted for the compliance of RF Exposure requirement. Attestation (by grantee) City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Changsha, Hunan, CHINA January 22, 2024 Jim Hu Manager

FCC Software Configuration Control Declaration Rev1.1 FN-LINK TECHNOLOGY LIMITED FCC Software Configuration Control Declaration Date: January 22, 2024 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: WIFI/Bluetooth MODULE/6252B-UUB FCC ID: 2AATL-6252B-UUB Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Signature: January 22, 2024 Name Jim Hu Position Manager Company Name FN-LINK TECHNOLOGY LIMITED Address No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, CHINA Tel +8613538178944 Fax / Email [email protected]

FCC ID: 2AATL-6252B-UUB IC: 12425A-6252BUUB BT ANT WIFI ANT FCC ID: 2AATL-6252B-UUB IC: 12425A-6252BUUB FCC ID: 2AATL-6252B-UUB IC: 12425A-6252BUUB FCC ID: 2AATL-6252B-UUB IC: 12425A-6252BUUB

Label Location FCC ID: 2AATL-6252B-UUB IC: 12425A-6252BUUB Model No.: 6252B-UUB

FCC ID: 2AATL-6252B-UUB IC: 12425A-6252BUUB

ALPHA's reports is using a digital certificate that is trusted on Adobe's official server. If there is no digital certificate or the digital certificate shows damaged in your report. Please do not accept the report. E-mail: [email protected] Tel: 400-8300-895 Website: http://www.a-lab.cn FCC&IC TEST REPORT FCC ID: 2AATL-6252B-UUB IC: 12425A-6252BUUB On Behalf of FN-LINK TECHNOLOGY LIMITED WIFI/Bluetooth MODULE Model No.: 6252B-UUB Prepared for : FN-LINK TECHNOLOGY LIMITED Address : No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, China Prepared By : Shenzhen Alpha Product Testing Co., Ltd. Address : Building i, No.2, Lixin Road, Fuyong Street, Bao'an District, 518103, Shenzhen, Guangdong, China Report Number : A2308305-C02-R04 Date of Receipt : November 24, 2023 Date of Test : November 24, 2023 - January 12, 2024 Date of Report : January 12, 2024 Version Number : V0 Result Pass Page 2 of 236 Report No.: A2308305-C02-R04 TABLE OF CONTENTS Description Page 1 TEST SUMMARY ..................................................................................................................................... 5 1.1 MEASUREMENT UNCERTAINTY............................................................................................................. 5 2 GENERAL INFORMATION ...................................................................................................................... 6 2.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 6 2.2 TEST MODE ........................................................................................................................................ 7 2.3 TEST FACILITY .................................................................................................................................... 7 2.4 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 2.5 DEVIATION FROM STANDARDS ............................................................................................................. 7 2.6 ABNORMALITIES FROM STANDARD CONDITIONS.................................................................................... 7 2.7 OTHER INFORMATION REQUESTED BY THE CUSTOMER ......................................................................... 7 2.8 ADDITIONAL INSTRUCTIONS ................................................................................................................. 7 3 TEST INSTRUMENTS LIST ..................................................................................................................... 8 4 TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 9 4.1 ANTENNA REQUIREMENT: .................................................................................................................... 9 4.2 CONDUCTED EMISSIONS ................................................................................................................... 10 4.3 EMISSION BANDWIDTH AND 99% OCCUPIED BANDWIDTH .................................................................... 13 4.4 PEAK TRANSMIT POWER ................................................................................................................... 98 4.5 POWER SPECTRAL DENSITY ............................................................................................................ 107 4.6 BAND EDGE .................................................................................................................................... 196 4.7 RADIATED EMISSION ....................................................................................................................... 228 4.8 FREQUENCY STABILITY .................................................................................................................... 235 Page 3 of 236 Report No.: A2308305-C02-R04 TEST REPORT DECLARATION Applicant : FN-LINK TECHNOLOGY LIMITED Address : No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, China Manufacturer : FN-LINK TECHNOLOGY LIMITED Address : No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, China EUT Description : WIFI/Bluetooth MODULE (A) Model No. : 6252B-UUB (B) Trademark : Measurement Standard Used: FCC Rules and Regulations Part 15 Subpart E RSS-247 Issue 2, ANSI C63.4:2014, ANSI C63.10:2013 The device described above is tested by Shenzhen Alpha Product Testing Co., Ltd. to determine the maximum emission levels emanating from the device. The maximum emission levels are compared to the FCC Part 15 Subpart C limits both conducted and radiated emissions. The test results are contained in this test report and Shenzhen Alpha Product Testing Co., Ltd. is assumed of full responsibility for the accuracy and completeness of these tests. After the test, our opinion is that EUT compliance with the requirement of the above standards. This report applies to above tested sample only. This report shall not be reproduced in parts without written approval of Shenzhen Alpha Product Testing Co., Ltd. Tested by (name + signature).........: Yannis Wen Project Engineer Approved by (name + signature).......: Reak Yang Project Manager Date of issue.............................: January 12, 2024 Page 4 of 236 Report No.: A2308305-C02-R04 Revision History Revision Issue Date Revisions Revised By V0 January 12, 2024 Initial released Issue Yannis Wen Page 5 of 236 Report No.: A2308305-C02-R04 1 Test Summary Test Item Section in CFR 47 Result Antenna requirement Section 15.203 Section 7.1.4 RSS-Gen Issue 5 PASS AC Power Line Conducted Emission Section 15.207 Section 7.2.4 RSS-Gen Issue 5, ANSI C63.10 PASS Peak Transmit Power Section 15.407(a), RSS-247 Issue 2 PASS Power Spectral Density Section 15.407(a), RSS-247 Issue 2 PASS Undesirable Emission Section 15.407(b), RSS-247 Issue 2 …

Text truncated - open the document above for the full version.

Page 42 of 236 Report No.: A2308305-C02-R04 -26dB Bandwidth NVNT ax40 5310MHz Ant1 -26dB Bandwidth NVNT ax80 5290MHz Ant1 Page 43 of 236 Report No.: A2308305-C02-R04 -26dB Bandwidth NVNT n20 5260MHz Ant1 -26dB Bandwidth NVNT n20 5280MHz Ant1 Page 44 of 236 Report No.: A2308305-C02-R04 -26dB Bandwidth NVNT n20 5320MHz Ant1 -26dB Bandwidth NVNT n40 5270MHz Ant1 Page 45 of 236 Report No.: A2308305-C02-R04 -26dB Bandwidth NVNT n40 5310MHz Ant1 Occupied Channel Bandwidth Condition Mode Frequency (MHz) Antenna 99% OBW (MHz) NVNT a 5260 Ant1 16.334 NVNT a 5280 Ant1 16.364 NVNT a 5320 Ant1 16.364 NVNT ac20 5260 Ant1 17.532 NVNT ac20 5280 Ant1 17.562 NVNT ac20 5320 Ant1 17.532 NVNT ac40 5270 Ant1 36.084 NVNT ac40 5310 Ant1 36.084 NVNT ac80 5290 Ant1 76.843 NVNT ax20 5260 Ant1 18.941 NVNT ax20 5280 Ant1 18.911 NVNT ax20 5320 Ant1 18.911 NVNT ax40 5270 Ant1 37.702 NVNT ax40 5310 Ant1 37.762 NVNT ax80 5290 Ant1 77.323 NVNT n20 5260 Ant1 17.562 NVNT n20 5280 Ant1 17.532 NVNT n20 5320 Ant1 17.592 NVNT n40 5270 Ant1 36.024 NVNT n40 5310 Ant1 36.084 Page 46 of 236 Report No.: A2308305-C02-R04 OBW NVNT a 5260MHz Ant1 OBW NVNT a 5280MHz Ant1 Page 47 of 236 Report No.: A2308305-C02-R04 OBW NVNT a 5320MHz Ant1 OBW NVNT ac20 5260MHz Ant1 Page 48 of 236 Report No.: A2308305-C02-R04 OBW NVNT ac20 5280MHz Ant1 OBW NVNT ac20 5320MHz Ant1 Page 49 of 236 Report No.: A2308305-C02-R04 OBW NVNT ac40 5270MHz Ant1 OBW NVNT ac40 5310MHz Ant1 Page 50 of 236 Report No.: A2308305-C02-R04 OBW NVNT ac80 5290MHz Ant1 OBW NVNT ax20 5260MHz Ant1 Page 51 of 236 Report No.: A2308305-C02-R04 OBW NVNT ax20 5280MHz Ant1 OBW NVNT ax20 5320MHz Ant1 Page 52 of 236 Report No.: A2308305-C02-R04 OBW NVNT ax40 5270MHz Ant1 OBW NVNT ax40 5310MHz Ant1 Page 53 of 236 Report No.: A2308305-C02-R04 OBW NVNT ax80 5290MHz Ant1 OBW NVNT n20 5260MHz Ant1 Page 54 of 236 Report No.: A2308305-C02-R04 OBW NVNT n20 5280MHz Ant1 OBW NVNT n20 5320MHz Ant1 Page 55 of 236 Report No.: A2308305-C02-R04 OBW NVNT n40 5270MHz Ant1 OBW NVNT n40 5310MHz Ant1 Page 56 of 236 Report No.: A2308305-C02-R04 Band 3 (5470-5725 MHz): -26dB Bandwidth Condition Mode Frequency (MHz) Antenna -26 dB Bandwidth (MHz) NVNT a 5500 Ant1 18.42 NVNT a 5580 Ant1 18.21 NVNT a 5700 Ant1 18.45 NVNT ac20 5500 Ant1 19.23 NVNT ac20 5580 Ant1 19.44 NVNT ac20 5700 Ant1 19.26 NVNT ac40 5510 Ant1 38.16 NVNT ac40 5670 Ant1 38.1 NVNT ac80 5530 Ant1 79.92 NVNT ax20 5500 Ant1 19.95 NVNT ax20 5580 Ant1 20.01 NVNT ax20 5700 Ant1 19.86 NVNT ax40 5510 Ant1 39.36 NVNT ax40 5670 Ant1 39 NVNT ax80 5530 Ant1 78.72 NVNT n20 5500 Ant1 19.44 NVNT n20 5580 Ant1 19.11 NVNT n20 5700 Ant1 19.38 NVNT n40 5510 Ant1 38.28 NVNT n40 5670 Ant1 38.22 -26dB Bandwidth NVNT a 5500MHz Ant1 Page 57 of 236 Report No.: A2308305-C02-R04 -26dB Bandwidth NVNT a 5580MHz Ant1 -26dB Bandwidth NVNT a 5700MHz Ant1 Page 58 of 236 Report No.: A2308305-C02-R04 -26dB Bandwidth NVNT ac20 5500MHz Ant1 -26dB Bandwidth NVNT ac20 5580MHz Ant1 Page 59 of 236 Report No.: A2308305-C02-R04 -26dB Bandwidth NVNT ac20 5700MHz Ant1 -26dB Bandwidth NVNT ac40 5510MHz Ant1 Page 60 of 236 Report No.: A2308305-C02-R04 -26dB Bandwidth NVNT ac40 5670MHz Ant1 -26dB Bandwidth NVNT ac80 5530MHz Ant1 Page 61 of 236 Report No.: A2308305-C02-R04 -26dB Bandwidth NVNT ax20 5500MHz Ant1 -26dB Bandwidth NVNT ax20 5580MHz Ant1 Page 62 of 236 Report No.: A2308305-C02-R04 -26dB Bandwidth NVNT ax20 5700MHz Ant1 -26dB Bandwidth NVNT ax40 5510MHz Ant1 Page 63 of 236 Report No.: A2308305-C02-R04 -26dB Bandwidth NVNT ax40 5670MHz Ant1 -26dB Bandwidth NVNT ax80 5530MHz Ant1 Page 64 of 236 Report No.: A2308305-C02-R04 -26dB Bandwidth NVNT n20 5500MHz Ant1 -26dB Bandwidth NVNT n20 5580MHz Ant1 Page 65 of 236 Report No.: A2308305-C02-R04 -26dB Bandwidth NVNT n20 5700MHz Ant1 -26dB Bandwidth NVNT n40 5510MHz Ant1 Page 66 of 236 Report No.: A2308305-C02-R04 -26dB Bandwidth NVNT n40 5670MHz Ant1 Occupied Channel Bandwidth Condition Mode Frequency (MHz) Antenna 99% OBW (MHz) NVNT a 5500 Ant1 16.364 NVNT a 5580 Ant1 16.394 NVNT a 5700 Ant1 16.394 NVNT ac20 5500 Ant1 17.532 NVNT ac20 5580 Ant1 17.562 NVNT ac20 5700 Ant1 17.562 NVNT ac40 5510 Ant1 36.084 NVNT ac40 5670 Ant1 36.084 NVNT ac80 5530 Ant1 76.244 NVNT ax20 5500 Ant1 18.881 NVNT ax20 5580 Ant1 18.911 NVNT ax20 5700 Ant1 18.851 NVNT ax40 5510 Ant1 37.822 NVNT ax40 5670 Ant1 37.522 NVNT ax80 5530 Ant1 76.603 NVNT n20 5500 Ant1 17.532 NVNT n20 5580 Ant1 17.562 NVNT n20 5700 Ant1 17.562 NVNT n40 5510 Ant1 36.024 NVNT n40 5670 Ant1 35.964 Page 67 of 236 Report No.: A2308305-C02-R04 OBW NVNT a 5500MHz Ant1 OBW NVNT a 5580MHz Ant1 Page 68 of 236 Report No.: A2308305-C02-R04 OBW NVNT a 5700MHz Ant1 OBW NVNT ac20 5500MHz Ant1 Page 69 of 236 Report No.: A2308305-C02-R04 OBW NVNT ac20 5580MHz Ant1 OBW NVNT ac20 5700MHz Ant1 Page 70 of 236 Report No.: A2308305-C02-R04 OBW NVNT ac40 5510MHz Ant1 OBW NVNT ac40 5670MHz Ant1 Page 71 of 236 Report No.: A2308305-C02-R04 OBW NVNT ac80 5530MHz Ant1 OBW NVNT ax20 5500MHz Ant1 Page 72 of 236 Report No.: A2308305-C02-R04 OBW NVNT ax20 5580MHz Ant1 OBW NVNT ax20 5700MHz Ant1 Page 73 of 236 Report No.: A2308305-C02-R04 OBW NVNT ax40 5510MHz Ant1 OBW NVNT ax40 5670MHz Ant1 Page 74 of 236 Report No.: A2308305-C02-R04 OBW NVNT ax80 5530MHz Ant1 OBW NVNT n20 5500MHz Ant1

Page 75 of 236 Report No.: A2308305-C02-R04 OBW NVNT n20 5580MHz Ant1 OBW NVNT n20 5700MHz Ant1 Page 76 of 236 Report No.: A2308305-C02-…

Text truncated - open the document above for the full version.