2AATXFC11001Flare Controller1

Whilst every precaution has been taken to ensure your safety, every electrical device should be handled with care at all times. Please follow these guidelines; Observe ALL warnings, precautions and instructions Do not expose to extreme temperatures or direct sunlight for any length of time. If the Controller becomes too hot to touch, unplug it (including all cables) immediately and stop use. Do not get the Controller or any cables wet. If you wish to clean the device, please do so using a dry cloth. Do not expose to liquids, chemicals or fluids as these may damage your device. Use only the cables provided with your device to plug the Controller into a power source. Using other cables may damage the controller. Do not open, modify or attempt to tamper with the Controller or internal battery. Doing so voids the limited warranty and could harm you or your Controller. Take care when handling the power supply to avoid electric shock. If you have an epileptic condition or have had any seizure in the past, please consult your doctor before playing. We recommend that parents observe their children while they play video games. If you or your child experience any of the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disorientation, or convulsions, DISCONTINUE USE IMMEDIATELY and consult your doctor. Play Safe; Radio Frequency And Specific Absorption Rate (SAR) This device complies with the Canada and European Union RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. It is intended to be used normally at a distance of at least 20 cm from the user. This device meets the U.S. Federal Communications Commission's (FCC) requirements for exposure to radio waves and is designed and manufactured not to exceed the FCC's emission limits for exposure to radiofrequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands We are committed to providing our customers with information about the chemical substances in our products as required to comply with legal requirements such as RoHS. The Bluetooth word, mark and logos are all owned by Bluetooth SIG. Information in this document, including URL and other Internet web site references, is subject to change without notice. ©2015 Flare Llc. All rights reserved www.flareplay.com Warnings • • • • • Children should be supervised whilst playing games and parents are encouraged to monitor children in online activities to ensure safe and responsible internet usage. All users should take regular breaks Don’t sit or stand too close to the screen Play in a well-lit room Stop playing if you feel drowsy, fatigued or in any way unwell To satisfy FCC eequi tion. Ope men The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter. Legal Notices For warranty information please visit www.flareplay.com/hardware/warranty flarePlay and third-party software licenses and end user Notices can be found at www.flareplay.com/hardware/licensing Use of flarePlay products constitutes acceptance of, as well as agreement to, those license terms. For more information about all flarePlay products, What’s in the Box and Device Spec. please visit www.flareplay.com/hardware • • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the flarePlay console or Controller and their warranty. • • Model: FCC ID: FC11001 2AATXFC11001 Federal Communications Commission Interference Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Regulatory Information

MET Laboratories TCB - Samples Agent Authorization Letter 2015-04-21 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Most Technology Service Co., Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Name: Tim Position: Manager Company Name: Playjam Ltd. Address: 4th Floor 41-42, Eastcastle Street, London, London W1W 8DU, United Kingdom Tel / Fax +442033015324/+442033015324 E-Mail: [email protected];

Declaration statement Letter 2015-04-27 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Declaration statement Letter To Whom It May Concern: We hereby declare that ( Flare Controller1 / FC11001) fulfill the requirements of 47 CFR Part 15C Section 15.247(g) & 15. 247( h). Compliance for section 15.247(g) According to Bluetooth Core Specification, the Bluetooth system transmits the packet with the pseudorandom hopping frequency with a continuous data and the short burst transmission from the Bluetooth system is also transmitted under the frequency hopping system with the pseudorandom hopping frequency system. Compliance for section 15.247(h) According to Bluetooth Core specification, the Bluetooth system incorporates with an adaptive system to detect other user within the spectrum band so that it individually and independently to avoid hopping on the occupied channels. According to the Bluetooth Core specification, the Bluetooth system is designed not have the ability to coordinated with other FHSS System in an effort to avoid the simultaneous occupancy of individual hopping frequencies by multiple transmitter. Please contact me if there is any information you may need. Sincerely, Name: Tim Slatford Position: Product Manager Company Name: Playjam Ltd. Address: 4th Floor 41-42, Eastcastle Street, London, London W1W 8DU, United Kingdom Tel / Fax: +442033015324/+442033015324 E-Mail: [email protected]

MET Laboratories TCB - Samples Long Term Confidentiality Request Letter 2015-04-21 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Flare Controller1 / FC11001) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - e.g. Block diagram - e.g. SCH - e.g. Operational Description required to be submitted with this application be permanently withheld from public review. SPECIFY REASON FOR REQUEST (i.e. the above documents are company proprietary information that could never get into the possession of your competition). Please contact me if there is any information you may need. Sincerely, Name: Tim Position: Manager Company Name: Playjam Ltd. Address: 4th Floor 41-42, Eastcastle Street, London, London W1W 8DU, United Kingdom Tel / Fax: +442033015324/+442033015324 E-Mail: [email protected];

FCC ID: 2AATXFC11001 Model No.: FC11001 FRONT VIEW OF SAMPLE BACK VIEW OF SAMPLE FCC ID: 2AATXFC11001 Model No.: FC11001 LEFT VIEW OF SAMPLE RIGHT VIEW OF SAMPLE FCC ID: 2AATXFC11001 Model No.: FC11001 TOP VIEW OF SAMPLE BOTTOM VIEW OF SAMPLE FCC ID: 2AATXFC11001 Model No.: FC11001 PHOTO OF THE ENTIRE SAMPLE

Label Label location

FCC ID: 2AATXFC11001 Model No.: FC11001 INTERNAL PHOTO OF SAMPLE – 1 INTERNAL PHOTO OF SAMPLE – 2 FCC ID: 2AATXFC11001 Model No.: FC11001 INTERNAL PHOTO OF SAMPLE – 3 INTERNAL PHOTO OF SAMPLE – 4 FCC ID: 2AATXFC11001 Model No.: FC11001 INTERNAL PHOTO OF SAMPLE – 5 INTERNAL PHOTO OF SAMPLE – 6 FCC ID: 2AATXFC11001 Model No.: FC11001 INTERNAL PHOTO OF SAMPLE – 7 Battery PHOTO OF SAMPLE – 8 FCC ID: 2AATXFC11001 Model No.: FC11001 INTERNAL PHOTO OF SAMPLE – 9 INTERNAL PHOTO OF SAMPLE – 10 FCC ID: 2AATXFC11001 Model No.: FC11001 INTERNAL PHOTO OF SAMPLE –11 INTERNAL PHOTO OF SAMPLE –12

Report No.: MTE/DYY/A15040462 Page 1 of 53 TEST REPORT For Applicant: Playjam Ltd. Address: 4th Floor 41-42, Eastcastle Street, London, London W1W 8DU, United Kingdom Product Name: Flare Controller1 Model Name: FC11001 Brand Name: Flare FCC ID: 2AATXFC11001 Report No.: MTE/DYY/A15040462 Date of Issue: Apr. 22, 2015 Issued by: Most Technology Service Co., Ltd. Address : No.5, 2nd Langshan Road, North District, Hi-tech Industrial Park, Nanshan, Shenzhen, Guangdong, China Tel : 86-755-8602 6850 Fax : 86-755-2601 3350 The report consists 53 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by MOST. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Report No.: MTE/DYY/A15040462 Page 2 of 53 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY.................................................................4 2. GENERAL INFORMATION...................................................................................5 2.1 Product Information................................................................................................................5 2.2 Objective................................................................................................................................5 2.3 Test Standards and Results....................................................................................................6 2.4 Environmental Conditions.......................................................................................................6 3. TEST METHODOLOGY........................................................................................7 3. 1TEST FACILITY......................................................................................................................7 3.2 GENERAL TEST PROCEDURES..........................................................................................7 4. SETUP OF EQUIPMENT UNDER TEST..............................................................8 4.1 SETUP CONFIGURATION OF EUT.......................................................................................8 4.2 SUPPORT EQUIPMENT........................................................................................................8 4.3 TEST EQUIPMENT LIST........................................................................................................9 5. 47 CFR Part 15 C Requirements......................................................................10 5.1 RF EXPOSURE....................................................................................................................10 5.1.1 Applicable Standard...........................................................................................................10 5.1.2 Measurement Result.........................................................................................................10 5.2 ANTENNA REQUIREMENT..................................................................................................11 5.2.1 Applicable Standard...........................................................................................................11 5.2.2 Evaluation Criteria..............................................................................................................11 5.2.3 Result: Compliance............................................................................................................11 5.3 AC Power Line Conducted Emission....................................................................................12 5.3.1Requirement.......................................................................................................................12 5.3.2 Block Diagram of Test Setup.............................................................................................12 5.3.3 Test procedure...................................................................................................................12 5.3.4 Test Result.........................................................................................................................12 5.4 Radiated Emission...............................................................................................................15 5.4.1Requirement.......................................................................................................................15 5.4.2 Test Configuration..............................................................................................................15 5.4.3 Test Procedure:.................................................................................................................16 5.4.4 Test Result.........................................................................................................................17 ...................................................................................................................................................20 5.5 Conducted Peak Output Power............................................................................................26 5.5.1 Requirement......................................................................................................................26 5.5.2 Block Diagram of Test Setup.............................................................................................26 5.5.3 Test Procedure..................................................................................................................26 5.5.4 Test Result.........................................................................................................................26 5.6 20dB Emission Bandwidth....................................................................................................30 5.6.1 Test Requirement..................…

Text truncated - open the document above for the full version.

FCC ID: 2AATXFC11001 Model No.: FC11001 CONDUCTED EMISSION TEST SETUP CE TEST SETUP FCC ID: 2AATXFC11001 Model No.: FC11001 RE TEST SETUP CE TEST SETUP