2AAZG3026Marker DAM

WWW.DYEPAINTBALL.COM DAM™ OWNER’S MANUAL WWW.DYEPAINTBALL.COM 1 WWW.DYEPAINTBALL.COM 2 WARNING IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES WWW.DYEPAINTBALL.COM 3 WARNING IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES WWW.DYEPAINTBALL.COM 4 2 1 3 WWW.DYEPAINTBALL.COM 5 7 6 4 5 WWW.DYEPAINTBALL.COM 6 WARNING: AFTER STEP 5, THE DAM™ WILL BE LIVE. BEFORE PROCEEDING, MAKE SURE THE BARREL SOCK IS IN PLACE AND DO NOT POINT THE DAM™ AT ANYTHING YOU DON’T INTEND TO SHOOT. 7 WWW.DYEPAINTBALL.COM 8 1 2 3 WWW.DYEPAINTBALL.COM When servicing your marker:• Make sure a barrel sock is fitted to the DAM™.• Make sure your loader/magazine is removed from the DAM™.• Make sure there are no paintballs in the breech of the DAM™.• Always remove the first stage regulator and relieve all residual gas pressure from the DAM™ before disassembly.• The DAM™ can hold a small residual charge of gas, typically 2 shots, with the first stage regulator removed. Always discharge the marker in a safe direction to relieve this residual gas pressure. WWW.DYEPAINTBALL.COM 10 FACTORY MODE CUSTOM MODE (DEFAULT) WWW.DYEPAINTBALL.COM 11 CONFIGURABLE MODE BLOCKED CONFIGURATION MODE 3 WWW.DYEPAINTBALL.COM 12 WWW.DYEPAINTBALL.COM 13 WWW.DYEPAINTBALL.COM 14 • Be sure the trigger is not adjusted to the point where it is too sensitive and may cause accidental discharge of the marker.• Removing the trigger spring will cause premature wear on the microswitch, resulting in failure. 2 1 WWW.DYEPAINTBALL.COM 15 3 WWW.DYEPAINTBALL.COM 16

WWW.DYEPAINTBALL.COM 17 When servicing your marker:• Make sure your loader and magazine are removed from the marker.• Make sure there are no paintballs in the breech of the marker.• Always remove the air supply and relieve all gas pressure in the marker before disassembly.• When using the marker in temperatures below 50° Fahrenheit it may be necessary to lube the DAM™ bolt more frequently. WWW.DYEPAINTBALL.COM 18 #020 #017 #012 #009 #011 #007 #010 Bolt Bumper Front #13x2 #015 #014 #013 #019 WWW.DYEPAINTBALL.COM 19 1 020 N 70 2 019 N 70 3 017 N 70 4 015 N 70 5 014 N 70 6 013 N 70 7 012 N 70 8 010 N 70 9 009 N 90 10 007 UR 90 11 013x2mm N 90 12 Bolt Bumper Front N 90 DAM™ BOLT O-RING LIST 12 5 4 11 1 6 1 1 1 1 9 3 5 10 2 7 8 WWW.DYEPAINTBALL.COM 20 WWW.DYEPAINTBALL.COM 21 010 BN 70 020 BN 70 PISTON BODY TOOL-LESS BACK CAP REGULATOR SEAT C-CLIP SHIM STACK CORRECT ORIENTATION )()()()() 1 WWW.DYEPAINTBALL.COM 22 WARNING: Loaded magazines will eject paintballs as soon as the cover door opens. Do NOT open Cover Door while magazine is pointed at your face or anyone else’s face! For safety, always place you hand over the top of a magazine before opening Cover Door. 1 WWW.DYEPAINTBALL.COM 23 WARNING - DO NOT depress bumper without paintballs in the DTM. In rare occasions releasing a locked bumper without paintballs in place can seriously damage the DTM. NEVER discharge a fully locked bumper at yourself or anyone else. 5 2 3 4 WWW.DYEPAINTBALL.COM 24 WARNING: After the following step, the DAM™ will be live and fire a paintball at the next trigger pull. Keep your DAM™ pointed away from anything you DO NOT want to shoot! WWW.DYEPAINTBALL.COM 25 6 7 8 9 WWW.DYEPAINTBALL.COM 26 WWW.DYEPAINTBALL.COM 27 1 WWW.DYEPAINTBALL.COM 29 WWW.DYEPAINTBALL.COM 30 1 2 3 WWW.DYEPAINTBALL.COM WWW.DYEPAINTBALL.COM 32 WWW.DYEPAINTBALL.COM 33 WWW.DYEPAINTBALL.COM WWW.DYEPAINTBALL.COM WWW.DYEPAINTBALL.COM 36 1 3 8 7 14 13 11 15 10 6 12 9 2 5 4 WWW.DYEPAINTBALL.COM 37 1 DAM Bolt2 Hopper Feed Cover3 Barrel Thread Carrier4 Eye Pipe Sytem5 On the Fly System6 Hyper™ In-Line Reg7 DTM Reciever Well8 Solenoid9 Spring Tension Adjust10 DAM Ultralite Frame11 Air Through Frame12 DAM™ Body13 DTM14 Modular Shroud15 ISStock PARTS LIST DYE Precision, Inc.10637 Scripps Summit Ct.San Diego, CA. 92131 DYE EuropeDye House, 7-8 Commerce WayCroydon, Surrey United Kingdom CR0 4XA DYE Germany GmbHAlbert Einstein Str. 2 B 77656 OffenburgGermany DYE AsiaNo. 253, Guojhong Rd. Dali City, Taichung County 412 Taiwan (R.O.C.)

ဘ䢅㐉╵厄䌓 ဘ䢅㐉╵厄䌓ဘ䢅㐉╵厄䌓 ဘ䢅㐉╵厄䌓   Mouse/Keyboard TX Dongle RX             Test Date Trade Name App.No Model Name Test Mode Free Space &Talking Position Communication System Frequency 2408 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2440 244 1 2442 2443 2444 2445 2446 2447 2448 2449 2450 2451 2452 2453 2454 2455 2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 24 74 Ant. Port Input Pwr. (dBm) 000 0000000000000000000000000000000000000000000000000000000000000 Tot. Rad. Pwr. (dBm) -5.4546 -5.3368 -5.345 -5.30259 -5.2377 -5.2532 -5.2012 -5.1273 -5.1154 -5.0947 -5 .0699 -5.0026 -4.9787 -4.944 -4 .9469 -4.8977 -4.8493 -4.8254 -4 .8025 -4.7743 -4.7266 -4.6197 -4.6345 -4.5637 -4.5632 -4.4593 -4.4576 -4.4361 -4.4094 -4.39 - 4.3421 -4.3895 -4.3567 -4.3353 -4.3582 -4.3308 -4.32 7 -4.3608 -4.3198 -4.3123 -4.2817 -4.2908 -4.2572 - 4.2589 -4.2125 -4.22 -4.1635 -4.2033 -4.1683 -4 .1406 -4.154 -4.1855 -4.1121 -4.1328 -4.1192 -4. 1281 -4.1416 -4.1827 -4.151 -4.1886 -4.2002 -4.2533 -4.1988 -4.2606 Peak EIRP (dBm) 1.5532 1.6805 1.6766 1.73319 1.8086 1. 749 1.9188 1.8951 1.8928 1.928 1.9972 2.0225 2.0818 2.1627 2.1549 2.1716 2. 1878 2.2989 2.2342 2.2427 2.3863 2. 4401 2.4421 2.4376 2.4128 2.5843 2.5947 2. 6192 2.6451 2.6131 2.6739 2.6215 2.6825 2.6517 2.5968 2.644 2.6126 2.5976 2. 5379 2.5783 2.6086 2.6019 2.63 28 2.597 2.5586 2.6476 2.6612 2.625 2.6186 2. 682 2.5632 2.5149 2.5475 2.5116 2.5 101 2.5305 2.4209 2.5215 2.4329 2. 3562 2.3499 2.2417 2.2821 2.2041 Directivity (dBi) 7.0077 7.0172 7.0216 7.03579 7.0464 7. 0022 7.12 7.0224 7.0082 7.0227 7.0671 7.0251 7.0605 7.1066 7.1018 7.0693 7. 0371 7.1243 7.0367 7.0169 7.1129 7. 0598 7.0766 7.0013 6.976 7.0436 7.0523 7. 0553 7.0545 7.0031 7.0159 7.0109 7.0392 6. 987 6.955 6.9748 6.9396 6.9585 6.8 577 6.8906 6.8903 6.8927 6.89 6. 8559 6.7712 6.8677 6.8247 6.8282 6. 7869 6.8226 6.7172 6.7004 6.6596 6. 6444 6.6294 6.6587 6.5625 6.7042 6.5 84 6.5447 6.5501 6.495 6.4809 6.4648 Efficiency (dB) -5.4546 -5.3368 -5.345 -5.30259 -5.2377 -5.2532 -5.2012 -5.1273 -5.1154 -5.0947 -5 .0699 -5.0026 -4.9787 -4.944 -4 .9469 -4.8977 -4.8493 -4.8254 -4 .8025 -4.7743 -4.7266 -4.6197 -4.6345 -4.5637 -4.5632 -4.4593 -4.4576 -4.4361 -4.4094 -4.39 - 4.3421 -4.3895 -4.3567 -4.3353 -4.3582 -4.3308 -4.32 7 -4.3608 -4.3198 -4.3123 -4.2817 -4.2908 -4.2572 - 4.2589 -4.2125 -4.22 -4.1635 -4.2033 -4.1683 -4 .1406 -4.154 -4.1855 -4.1121 -4.1328 -4.1192 -4. 1281 -4.1416 -4.1827 -4.151 -4.1886 -4.2002 -4.2533 -4.1988 -4.2606 Efficiency (%) 28.48 29.263 29.208 29.4945 29.938 29. 832 30.191 30.709 30.794 30.941 31.118 31.604 31.779 32.034 32.012 32.377 32. 74 32.92 33.094 33.31 33.677 34.5 17 34.399 34.965 34.969 35.815 35.829 36.007 36.229 36.392 36.796 36.396 36. 672 36.853 36.659 36.891 36.923 36.637 36.985 37.049 37.31 37.233 37.522 37.507 37.91 37.844 38.34 37.99 38. 297 38.543 38.424 38.146 38.796 38.612 38.733 38.653 38.534 38.171 38.45 38. 119 38.017 37.555 38.029 37.492 Gain (dBi) -1.5532 -1.6805 -1.6766 -1.73319 -1.8086 -1.749 - 1.9188 -1.8951 -1.8928 -1.928 -1 .9972 -2.0225 -2.0818 -2.1627 -2 .1549 -2.1716 -2.1878 -2.2989 -2 .2342 -2.2427 -2.3863 -2.4401 -2.4421 -2.4376 -2.4128 -2.5843 -2.5947 -2. 6192 -2.6451 -2.6131 -2.6739 -2.6215 -2 .6825 -2.6517 -2.5968 -2.644 -2.6 126 -2.5976 -2.5379 -2.5783 -2.6086 -2.6019 -2.632 8 -2.597 -2.5586 -2.6476 -2.6612 -2.625 -2.6186 -2 .682 -2.5632 -2.5149 -2.5475 -2.5116 -2.5101 - 2.5305 -2.4209 -2.5215 -2.4329 -2.3562 -2.3499 -2.2417 -2.2821 -2.2041 NHPRP ±Pi/4 (dBm) -7.5392 -7.4033 -7.4127 -7.3563 -7.29 -7.2918 -7 .2466 -7.1688 -7.143 -7.1254 -7. 0984 -7.0184 -6.9945 -6.9607 -6. 9509 -6.9018 -6.8408 -6.8232 -6.7 866 -6.7502 -6.7118 -6.5936 -6.6029 -6 .5301 -6.5218 -6.4195 -6.4149 -6.3835 -6.3569 -6.3312 -6.2727 -6.3161 -6. 2877 -6.2546 -6.2745 -6.2466 -6.23 51 -6.281 -6.2185 -6.219 -6.1751 -6.1847 -6.148 4 -6.1531 -6.0856 -6.1088 -6.0303 -6.0696 -6.0384 -5.9996 -6.0072 -6.0379 -5.9651 -5.983 -5.9638 -5 .9719 -5.9807 -6.0316 -5.9868 -6.0257 -6.0407 -6.082 -6.0175 -6.0828 NHPRP ±Pi/6 (dBm) -9.5671 -9.4244 -9.4358 -9.36573 -9.2923 -9.2949 -9.2475 -9.1655 -9.1381 -9.1167 -9.0912 -9.0019 -8.9832 -8.9388 -8.93 -8.8733 -8.8097 -8.8003 -8 .7521 -8.7114 -8.6759 -8.5447 -8.5547 -8.4806 -8.4635 -8.3584 -8.3558 -8. 3169 -8.2964 -8.2607 -8.1947 -8.233 -8 .211 -8.1686 -8.1898 -8.1597 -8.14 16 -8.1946 -8.1184 -8.1256 -8.0694 -8.0854 -8.032 7 -8.0424 -7.9675 -7.9987 -7.9082 -7.9463 -7.9181 -7.8654 -7.8694 -7.901 -7.8289 -7.8391 -7.815 - 7.8268 -7.8289 -7.8784 -7.8297 -7.868 -7.8901 -7.9192 -7.8466 -7.9071 NHPRP ±Pi/8 (dBm) -10.928 -10.782 -10.794 -10.715 -10. 635 -10.635 -10.591 -10.501 -10.478 - 10.445 -10.425 -10.335 -10.312 -10.26 -10.262 -10.195 -10.129 -10.124 -1 0.066 -10.023 -9.9879 -9.8399 -9.8591 -9.7809 -9.7581 -9.6483 -9.6512 -9. 6026 -9.586 -9.5454 -9.478 -9.5104 -9 .4897 -9.4413 -9.47 -9.4332 -9.4181 -9.4695 -9.39 -9.3991 -9.3406 -9.359 -9.2948 -9.3046 -9.2306 -9.2639 -9.1 732 -9.2111 -9.1829 -9.1241 -9.1264 -9 .1561 -9.084 -9.0919 -9.0673 -9.08 3 -9.0801 -9.1299 -9.0828 -9.1163 -9.1475 -9.1666 -9.0937 -9.1507 Upper Hem. PRP (dBm) -10.474 -10.319 -10.313 -10.2571 -10. 18 -10.18 -10.109 -10.031 -9.9901 -9 .9471 -9.9423 -9.8282 -9.8125 -9.7495 -9.7381 -9.6851 -9.6237 -9.6046 -9 .5479 -9.5189 -9.4582 -9.321 -9.3189 -9.2434 -9.239 -9.1281 -9.1064 -9. 0647 -9.0407 -8.9912 -8.9223 -8.956 -8 .9118 -8.8729 -8.8777 -8.8492 -8.823 1 -8.8686 -8.7855 -8.7899 -8.7388 -8.7331 -8.6911 - 8.68 -8.5994 -8.6049 -8.5171 -8.5516 -8.5174 -8.4 727 -8.4578 -8.495 -8.39 -8.3924 -8.3719 -8.39 12 -8.3701 -8.4232 -8.367 -8.3826 -8.3945 -8.4379 -8.3333 -8.3843 Lower Hem. PRP (dBm) -7.0967 -6.9961 -7.0107 -6.97466 -6.9155 -6.9382 -6.8956 -6.8237 -6.8254 -6.8155 -6 .781 -6.7365 -6.7086 -6.6878 -6 .6979 -6.6505 -6.6086 -6.5824 - 6.5764 -6.5485 -6.5075 -6.416 -6.4395 -6.3712 -6.3727 -6.2724 -6.2811 -6…

Text truncated - open the document above for the full version.

FCC ID: 2AAZG3026 International Standards Laboratory Report Number: ISL-13LR160FC APPENDIX 2 PHOTOGRAPHS OF EUT FCC ID: 2AAZG3026 International Standards Laboratory Report Number: ISL-13LR160FC EUT 1 EUT 2 FCC ID: 2AAZG3026 International Standards Laboratory Report Number: ISL-13LR160FC EUT 3

FCC ID LABEL FORMAT AND LOCATION Applicant: DYE PRECISION, INC. FCC ID: 2AAZG3026

FCC ID: 2AAZG3026 International Standards Laboratory Report Number: ISL-13LR160FC APPENDIX 3 PHOTOGRAPHS OF EUT FCC ID: 2AAZG3026 International Standards Laboratory Report Number: ISL-13LR160FC EUT 1 EUT 2 FCC ID: 2AAZG3026 International Standards Laboratory Report Number: ISL-13LR160FC EUT 3 EUT 4 FCC ID: 2AAZG3026 International Standards Laboratory Report Number: ISL-13LR160FC EUT 5 EUT 6 RF Antenna

Page: 1 of 35 TEST REPORT of FCC Part 15 Subpart C New Application; Class I PC; Class II PC Product : Marker DAM Brand: DYE Model: 3026YYYY( Y=0~9, A~Z) Model Difference: For market segmentation FCC ID: 2AAZG3026 FCC Rule Part: §15.249 Applicant: DYE PRECISION, INC. Address: 10637 Scripps Summit Court San Diego, CA 92131 Test Performed by: International Standards Laboratory <Lung-Tan LAB> *Site Registration No. BSMI: SL2-IN-E-0013; MRA TW1036; TAF: 0997; IC: IC4067B-3; *Address: No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325, Taiwan *Tel : 886-3-407-1718; Fax: 886-3-407-1738 Report No.: ISL-13LR160FC Issue Date : 2013/09/10 Test results given in this report apply only to the specific sample(s) tested and are traceable to national or international standard through calibration of the equipment and evaluating measurement uncertainty herein. This report MUST not be used to claim product endorsement by TAF, NVLAP or any agency of the Government. This test report shall not be reproduced except in full, without the written approval of International Standards Laboratory. -2 of 26- FCC ID: 2AAZG3026 International Standards Laboratory Report Number: ISL-13LR160FC VERIFICATION OF COMPLIANCE Applicant: DYE PRECISION, INC. Product Description: Marker DAM Brand Name: DYE FCC ID: 2AAZG3026 FCC Rule Part: §15.249 Model No.: 3026YYYY( Y=0~9, A~Z) Model Difference: For market segmentation Date of test: 2013/08/29 ~2013/09/09 Date of EUT Received: 2013/08/29 We hereby certify that: All the tests in this report have been performed and recorded in accordance with the standards described above and performed by an independent electromagnetic compatibility consultant, International Standards Laboratory. The test results contained in this report accurately represent the measurements of the characteristics and the energy generated by sample equipment under test at the time of the test. The sample equipment tested as described in this report is in compliance with the limits of above standards. Test By: Date: 2013/09/10 Dion Chang / Engineer Prepared By: Date: 2013/09/10 Gigi Yeh / Specialist Approved By: Date: 2013/09/10 Vincent Su / Technical Manager -3 of 26- FCC ID: 2AAZG3026 International Standards Laboratory Report Number: ISL-13LR160FC Version Version No. Date Description 00 2013/09/10 Initial creation of document -4 of 26- FCC ID: 2AAZG3026 International Standards Laboratory Report Number: ISL-13LR160FC Table of Contents 1 GENERAL INFORMATION ........................................................................................... 5 1.1 PRODUCT DESCRIPTION .................................................................................................................... 5 1.2 RELATED SUBMITTAL(S) / GRANT (S) ............................................................................................... 6 1.3 TEST METHODOLOGY ........................................................................................................................ 6 1.4 TEST FACILITY .................................................................................................................................. 6 1.5 SPECIAL ACCESSORIES ...................................................................................................................... 6 1.6 EQUIPMENT MODIFICATIONS ............................................................................................................ 6 2 SYSTEM TEST CONFIGURATION .............................................................................. 7 2.1 EUT CONFIGURATION ....................................................................................................................... 7 2.2 EUT EXERCISE .................................................................................................................................. 7 2.3 TEST PROCEDURE .............................................................................................................................. 7 2.4 MEASUREMENT EQUIPMENT USED: .................................................................................................. 8 2.5 LIMITATION ....................................................................................................................................... 9 2.6 CONFIGURATION OF TESTED SYSTEM ............................................................................................. 11 3 SUMMARY OF TEST RESULTS ................................................................................. 12 4 DESCRIPTION OF TEST MODES .............................................................................. 12 5 CONDUCTED EMISSIONS TEST ............................................................................... 13 5.1 MEASUREMENT PROCEDURE: ......................................................................................................... 13 5.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................. 13 5.3 MEASUREMENT EQUIPMENT USED: ................................................................................................ 13 5.4 MEASUREMENT RESULT: ................................................................................................................ 13 6 RADIATED EMISSION TEST ...................................................................................... 14 6.1 MEASUREMENT PROCEDURE........................................................................................................... 14 6.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................. 14 6.3 MEASUREMENT EQUIPMENT USED: ................................................................................................ 15 6.4 FIELD STRENGTH CALCULATION .................................................................................................... 15 6.5 MEASUREMENT RESULT ..............................................................…

Text truncated - open the document above for the full version.

FCC ID: 2AAZG3026 International Standards Laboratory Report Number: ISL-13LR160FC APPENDIX 1 PHOTOGRAPHS OF SETUP FCC ID: 2AAZG3026 International Standards Laboratory Report Number: ISL-13LR160FC Radiated Emission Setup Photos