2AB4KMTYH8129SMALL RUBBER FINISH BLUETOOTH SPEAKER WITH CLOTH TRIM-FM RADIO

Type-C 02'(/12363 Purple Purple When switch to AUX mode, the blue LED will turn off, and the red LED will stay illuminated, notifying you, the unit is in Aux-in mode. This product has been manufactured and sold under the responsibility of CURTIS INTERNATIONAL LTD. PROSCAN, and the PROSCAN logo are trademarks used under license by CURTIS INTERNATIONAL LTD. – further information at www.proscan-brand.com. All other products, services, companies, trademarks, trade or product names and logos referenced herein are the property of their respective owners. PROSCAN PSPĉ 53 [email protected] ƫ5,!ġƫ&'ƫ+*ƫ0$!ƫ/,!'!.ċ %OXHWRRWK6SHDNHU 86%7\SH&&KDUJLQJ&DEOH 8VHU0DQXDO 1.ON/OFF/MODE switch 2.Charging LED light 3.Play/Pause/Radio auto scan button 4.Next/Volume + button 5.Previous/Volume - button 6.Bluetooth/AUX IN/FM LED light 7.Bluetooth pairing button 8.USB Type-C port 9.AUX IN port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ro PSP53  PROSCAN PSP ĉĆ3 Pour faire une demande de garantie, veuillez envoyer un courriel électronique à support @curtiscs.com ou appeler le 1-800-968-9853. 90 jours de garantie Ce produit est garanti contre tout défaut de matériel et de fabrication pendant une période de quatre-vingt-dix (90) jours à compter de la date d'achat d'origine. Pendant cette période, votre seul recours est la réparation ou le remplacement de ce produit ou composant jugé défectueux, à notre choix; Cependant, vous êtes responsable de tous les coûts associés au retour du produit. Si le produit ou le composant n'est plus disponible, nous le remplacero- ns par un produit similaire de valeur égale ou supérieure. Avant l'envoi d'un produit de remplacement, le produit doit être rendu inutilisable ou nous être renvoyé. Cette garantie ne couvre pas le verre, les filtres, l’usure normale, une utilisation non conforme aux instructions imprimées, ni les dommages matériels résultant d’un accident, d’une altération, d’une utilisation abusive ou abusive. Cette garantie s’applique uniquement à l’acheteur initial ou au destinataire du cadeau. Conservez le reçu de vente original, car une preuve d'achat est nécessaire pour faire une réclamation de garantie. Cette garantie est annulée si le produit est utilisé pour un usage autre que domestique ou s'il est soumis à une tension ou une forme d'onde autre que celle indiquée sur l'étiquette (par exemple, 120V ~ 60Hz). Nous excluons toute réclamation pour des dommages spéciaux, accessoires et consécutifs causés par une violation de la garantie explicite ou implicite. Toute responsabilité est limitée au montant du prix d'achat. Toute garantie implicite, y compris toute garantie légale ou condition de qualité march- ande ou d'adéquation à un usage particulier, est refusée sauf dans la mesure où la loi l'interdit, auquel cas cette garantie ou condition est limitée à la durée de cette garantie écrite. Cette garantie vous confère des droits légaux spécifique. Vous pouvez avoir d'autres droits légaux qui varient selon votre lieu de résidence. Certains états ou provinces n'autorisant pas les limitations de garanties implicites ou de dommages spéciaux, accessoires ou indirects, les limitations ci-dessus peuvent ne pas vous concerner. Pour un service plus rapide, trouver le modèle, le type et les numéros de série sur votre appareil. JOIGNEZ VOTRE PREUVE D'ACHAT ICI, UNE PREUVE D'ACHAT EST NÉCESSAIRE POUR OBTENIR UN SERVICE DE GARANTIE. Veuillez avoir l’information suivantes lorsque vous contactez l'équipe d'assistance : • Nom, adresse et numéro de téléphone. • Numéro de modèle et numéro de série. • Une description claire et détaillée du problème. • Preuve d'achat comprenant le nom, l'adresse et la date d'achat du revendeur ou du détaillant. Ce produit a été fabriqué et vendu sous la responsabilité de CURTIS INTERNATIONAL LTD. PROSCAN, et le logo PROSCAN sont des marques utilisées sous licence par CURTIS INTERNATIONAL LTD. – pour plus d’informations : www.proscan-brand.com. Tous autres produits, services, dénominations sociales, marques, nom commerciaux, noms de produits et logos référencés ici sont la propriété de leurs titulaires respectifs. $VVXUH]YRXVTXHOHFkEOH86%HVWIHUPHPHQWEUDQFKpVXUODSULVH86%7\SH&GH O¶HQFHLQWH &RQWHQXGXFROLV +DXWSDUOHXU%OXHWRRWK &kEOHGHFKDUJH86%7\SH& 0DQXHOGH, 8WLOLVDWHXU ,QWHUUXSWHXU212))PRGH &KDUJHGHOXPLqUH/(' %RXWRQOHFWXUHSDXVHUHFKHUFKH DXWRPDWLTXHGHODUDGLR %RXWRQ6XLYDQWYROXPH %RXWRQ3UpFpGHQWYROXPH /XPLqUH/('%OXHWRRWK$8;,1 5DGLR)0 %RXWRQG DSSDLUDJH%OXHWRRWK 3RUW86%7\SH& 3RUW$8;,1 &RQQHFWH]OHFkEOH86%7\SH&jO DSSDUHLOHWEUDQFKH]OHVXUXQFKDUJHXU 9'&$PLQLPXP6LO DSSDUHLOHVWFRPSOqWHPHQWGpFKDUJpLOIDXGUD HQYLURQKHXUHVSRXUOHUHFKDUJHUFRPSOqWHPHQWj9P$ $SSX\H]VXUOHERXWRQG DOLPHQWDWLRQ SRXUSDVVHUHQPRGH$8; 8QDSSXLORQJVXUOHERXWRQ©ªRX©ªSHUPHWGHSDVVHUjODVWDWLRQSUpUpJOpHVXLYDQWH RXSUpFpGHQWH8QDSSXLFRXUWVXUOHERXWRQ©ªRX©ªSHUPHWG DXJPHQWHURXGH GLPLQXHUOHQLYHDXVRQRUH PP[PP / HQFHLQWHFRQWLHQWGHVSLOHVLQWpJUpHVHWQHGRLWSDVrWUH MHWpHDYHFOHVRUGXUHVPpQDJqUHV9HXLOOH]FRQVXOWHUOHV DXWRULWpVORFDOHVSRXUFRQQDvWUHODSURFpGXUHjVXLYUH SRXUpOLPLQHUFHWDSSDUHLO

Rev 1/26/2023 MET INDUSTRIAL LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 9-21-2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AB4KMTYH8129 MET INDUSTRIAL LTD ("the applicant")certifies that the equipment for which authorization is sought is not“covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Applicant printed name) TONY LAM/Manager Rev 1/26/2023 MET INDUSTRIAL LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 9-21-2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AB4KMTYH8129 MET INDUSTRIAL LTD (“the applicant”)certifies that, as of the date o f the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” Sincerely, (Applicant signature) (Applicant printed name) TONY LAM/Manager

MET INDUSTRIAL LTD Room 605, 6/F., No. 9叭flngHong Street, Lai Chi Kok, Kowloon, Hong Kong Date: 12严9啕2024 Federal Communications Commission A uthorization and Evaluation Division 7 4 35 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AB4KMTYH8129 FRN: 0023472509 US Agent -Attestation Statement I Part 2.911 ( d )( 7 ) MET INDUSTRIAL L TD ce『titles, that as of 1 4-5-2014, we have designated SPECTRA MERCHANDISING INTERNATIONAL, INC. t o accept service of process on our behalf for FCC ID: 2AB4KMTYH8129. MET INDUSTRIAL LTD, accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within th e U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment 『 whichever is later. SPECTRA MERCHANDISING INTERNATIONAL, INC., accepts as of the date of the filing of this application, the obligation of being the designated agent for the pu「pose of accepting service of process on behalf of MET INDUSTRIAL LTD fo「FCC ID: 2AB4KMTY忖8129. Designated Agent Information: Corn pa门y Name: Spectra Merchandising International, Inc. FRN: 000686 7 9 07 A ddress: 4230 N. Normandy Ave. Chicago, IL 60634 U.S.A. Contact Person: Ron Shulda P hone: 773-202-8408 Email: [email protected] Si ncerely , Company: MET INDUSTRIAL LTD Company Representative: TONY LAM/Manager Signature: Designated Agent: Spectra Merchandising International, Inc. Designated Agent Representative: Ron Shulda Si

Rev 11/20/07 MET INDUSTRIAL LTD Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AB4KMTYH8129 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram, Schematics, Operational Description, Block Diagram, Schematics, Operational Description, The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Client’s name / title ：TONY LAM/Manager Contact information / address: MET INDUSTRIAL LTD /Room 605, 6/F., No. 9 Wing Hong Street, Lai Chi Kok, Kowloon,

MET INDUSTRIAL LTD Declaration on model difference We the undersigned hereby confirm that any of our production units bearing the following model numbers are identical in circuitry and electrical, mechanical and physical construction; only indicates for differences are the appearance, trade name and model number; FCC ID: 2AB4KMTYH8129 Production name Trade name Model no. SMALL RUBBER FINISH BLUETOOTH SPEAKER WITH CLOTH TRIM-FM RADIO MET, PROSCAN MET8129, PSP853, PSP853-BLUEGRN-PL, PSP853-SILVERMNT-PL, PSP853-PINKGRN-PL, PSP853-BLACKNEON-PL, PSP853- PURPLEMNT-PL, PSP853-ASST1_PL, PSP853- ASST2_PL, PSP853-ASST3_PL, PSP853- ASST4_PL, PSP853-ASST5_PL, PSP853- ASST6_PL, PSP853-ASST7_PL, PSP853- ASST8_PL, PSP853-XXXXXXXXXXXX (where X denote any printable characters in the ASCII Standard Character Table to represent variances in cosmetics or buyers) Confirmed by MET INDUSTRIAL LTD Client’s name / title ： TONY LAM/Manager Contact information / address: MET INDUSTRIAL LTD /Room 605, 6/F., No. 9 Wing Hong Street, Lai Chi Kok, Kowloon, Date: 2024-9-21

MET INDUSTRIAL LTD Date: 2024-9-21 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: 2AB4KMTYH812 9 To Whom It May Concern: This letter is to ascertain thatMET INDUSTRIAL LTD/Room 605 , 6/F., No. 9 Wing Hong Street, Lai Chi Kok, Kowloon, EUT: SMALL RUBBER FINISH BLUETOOTH SPEAKER WITH CLOTH TRIM-FM RADIO MODEL No.: MET8129, PSP853, PSP853-BLUEGRN-PL, PSP853-SILVERMNT-PL, PSP853- PINKGRN-PL, PSP853-BLACKNEON-PL, PSP853-PURPLEMNT-PL, PSP853-ASST1_PL, PSP853-ASST2_PL, PSP853-ASST3_PL, PSP853-ASST4_PL, PSP853-ASST5_PL, PSP853- ASST6_PL, PSP853-ASST7_PL, PSP853-ASST8_PL, PSP853-XXXXXXXXXXXX (where X denote any printable characters in the ASCII Standard Character Table to represent variances in cosmetics or buyers) Has been the units used for conducting FCC compliance testing, the SDoC part Have be tested by EMTEK (SHENZHEN) CO., LTD. If you have any question or concerns, pls. contact us. Sincerely, Client’s signature ： Client’s name / title ：TONY LAM/Manager Contact information / address: MET INDUSTRIAL LTD /Room 605, 6/F., No. 9 Wing Hong Street, Lai Chi Kok, Kowloon

MET INDUSTRIAL LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-9-21 SUBJECT: FCC Application for FCC ID: 2AB4KMTYH8129 To Whom It May Concern: We, the undersigned, hereby authorize Lisa Wang at EMTEK (SHENZHEN) CO., LTD.on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out byEMTEK (SHENZHEN) CO., LTD.on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Client’s name / title ： TONY LAM/Manager Contact information / address: MET INDUSTRIAL LTD /Room 605, 6/F., No. 9 Wing Hong Street, Lai Chi Kok, Kowloon,

EUT EXTERNAL PHOTOGRAPHS ----------------The end----------------

Bottom PSP853(8129) W28xH25mm Cancer and Reproductive Harm -www.P65Warning.ca.gov MODEL: PSP853 OUTPUT POWER : 3W Micro USB POWER SUPPLY : DC 5V CURTIS INTERNATIONAL LTD FCC ID : 2AB4KMTYH8129 IMPORTED BY: MADE IN CHINA PORTABLE BLUETOOTH SPEAKER FrequencyFM: 87.5-108 MHz MANUFACTURED: SEPTEMBER 2024 40 X 8 MM S/N: A2409587440000001 S/N: A2409587440003075 S/N: A220XXXXXX0000001 Cancer and Reproductive Harm -www.P65Warning.ca.gov MODEL:SP1043 OUTPUT POWER : 3W x 2 Micro USB POWER SUPPLY : DC 5V CURTIS INTERNATIONAL LTD FCC ID : 2AB4KMETYH8128 IMPORTED BY: MADE IN CHINA PORTABLE BLUETOOTH SPEAKER FrequencyFM: 87.5-108 MHz FAC S/N: A240XXXXXX0000001 MANUFACTURED: XXXX 2024

EUT INTERNAL PHOTOGRAPHS BT antenna ----------------The end----------------

FCC ID : 2AB4KMTYH8129  Test Standards and Limits 1. According to KDB 447498 D01 v06, Section 4.3.1 2. FCC Radiofrequency radiation exposure limits: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤50 mm are determined by: [(max power of channel)/(min test separation distance)]*[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm, and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 4.1 f) is applied to determine SAR test exclusion. We use 5mm as separation distance to calculate.  Measurement and Calculation 1. Maximum transmit power BT antenna gain：-0.58 dBi Transmit Frequency (GHz) Mode Max Conducted Power (dBm) tune up maximum power(dBm) Result calculation 1-g SAR 2.402 DH5 -5.06 0 0.310 3 2.441 DH5 -3.98 0 0.312 3 2.480 DH5 -3.45 0 0.315 3 2.402 2DH5 -2.49 0 0.310 3 2.441 2DH5 -1.36 0 0.312 3 2.480 2DH5 -0.9 0 0.315 3 2.402 3DH5 -1.85 0 0.310 3 2.441 3DH5 -0.75 0 0.312 3 2.480 3DH5 -0.23 0 0.315 3 2. MPE Calculation For the max result : 0.315≤ 3.0 for 1-g SAR extremity SAR, No SAR is required. -End of the Report-

Inverted F Antenna Specification Summary ITEM ANT SPEC Model Name 2.4G ANT Horizontal Vertical 2400MHz 2400MHz2500MHz2400MHz2400MHz 2500MHz Center Frequency -1.26 -0.76 -0.58 -5.25 -2.46 -1.86 MAX. Gain -0.58dB Polarization Horizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance 50 Ohm Antenna Length 38.20mm Manufacture ZHUHAI JIELI TECHNOLOGY CO.,LTD Antenna Photo & Length (mm) Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -1.26174 -30.0801 -7.18716 2450 -0.765802 -36.5604 -7.48023 2500 -0.585582 -22.0315 -6.59127 Vertical: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -5.2537 -22.1424 -12.4294 2450 -2.4652 -24.5837 -10.4702 2500 -1.86120 -29.5214 -9.20432 ANT Test Labs：Attestation of Global Compliance Co., Ltd.

Report No. ENS2409020130W00201R Page 1 of 66 Ver.1.0 TEST REPORT Product Name : SMALL RUBBER FINISH BLUETOOTH SPEAKER WITH CLOTH TRIM-FM RADIO Model Number : See Page 5 for details FCC ID : 2AB4KMTYH8129 Prepared for : MET INDUSTRIAL LTD Address : Room 605, 6/F., No. 9 Wing Hong Street, Lai Chi Kok, Kowloon, Hong Kong Prepared by : EMTEK (SHENZHEN) CO., LTD. Address : Building 69, Majialong Industry Zone,Nanshan District, Shenzhen, Guangdong, China Tel: (0755) 26954280 Fax: (0755) 26954282 Report Number : ENS2409020130W00201R Date(s) of Tests : September 3, 2024 to September 15, 2024 Date of issue : September 20, 2024 $二维码$ Report No. ENS2409020130W00201R Page 2 of 66 Ver.1.0 Table of Contents 1 TEST RESULT CERTIFICATION ................................................................................................................ 3 PRODUCTION NAME ........................................................................................................................................ 5 2 EUT TECHNICAL DESCRIPTION .............................................................................................................. 6 3 SUMMARY OF TEST RESULT ................................................................................................................... 7 4 TEST METHODOLOGY.............................................................................................................................. 8 4.1 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................................................ 8 4.2 MEASUREMENT EQUIPMENT USED .......................................................................................... 8 4.3 DESCRIPTION OF TEST MODES ................................................................................................ 9 5 FACILITIES AND ACCREDITATIONS ...................................................................................................... 10 5.1 FACILITIES .................................................................................................................................. 10 5.2 EQUIPMENT................................................................................................................................ 10 6 TEST SYSTEM UNCERTAINTY ............................................................................................................... 11 7 SETUP OF EQUIPMENT UNDER TEST .................................................................................................. 12 7.1 RADIO FREQUENCY TEST SETUP 1 ........................................................................................ 12 7.2 RADIO FREQUENCY TEST SETUP 2 ........................................................................................ 12 7.3 CONDUCTED EMISSION TEST SETUP..................................................................................... 14 7.4 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ......................................................... 15 7.5 SUPPORT EQUIPMENT ............................................................................................................. 15 8 FREQUENCY HOPPING SYSTEM REQUIREMENTS ............................................................................ 16 8.1 STANDARD APPLICABLE .................................................................................................................. 16 8.2 EUT PSEUDORANDOM FREQUENCY HOPPING SEQUENCE ................................................................ 16 8.3 EQUAL HOPPING FREQUENCY USE ................................................................................................. 17 8.4 FREQUENCY HOPPING SYSTEM....................................................................................................... 17 9 TEST REQUIREMENTS ........................................................................................................................... 18 9.1 20DB&99%BANDWIDTH ............................................................................................................ 18 9.2 CARRIER FREQUENCY SEPARATION ...................................................................................... 26 9.3 NUMBER OF HOPPING FREQUENCIES ................................................................................... 30 9.4 AVERAGE TIME OF OCCUPANCY (DWELL TIME) .................................................................... 32 9.5 MAXIMUM PEAK CONDUCTED OUTPUT POWER ................................................................... 34 9.6 CONDUCTED SUPRIOUS EMISSION ........................................................................................ 38 9.7 RADIATED SPURIOUS EMISSION ............................................................................................. 50 9.8 CONDUCTED EMISSION TEST ................................................................................................. 63 9.9 ANTENNA APPLICATION ............................................................................................................ 66 Report No. ENS2409020130W00201R Page 3 of 66 Ver.1.0 1 TEST RESULT CERTIFICATION Applicant : MET INDUSTRIAL LTD Address : Room 605, 6/F., No. 9 Wing Hong Street, Lai Chi Kok, Kowloon, Hong Kong Manufacturer : Dongguan City Wangniudun Yinghui Electronics Factory Address : Chijiaoluduan Zhengzhong Road Wangniudun Town Dongguan City, Guangdong Province，China EUT : SMALL RUBBER FINISH BLUETOOTH SPEAKER WITH CLOTH TRIM-FM RADIO Model Name : See Page 5 for details Trade Mark : MET, PROSCAN Measurement Procedure Used: APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C PASS IC RSS-GEN, Issue 5(04-2018)+A1(03-2019)+A2(02-2021) IC RSS-247 Issue 2(02-2017) PASS The above equipment was tested by EMTEK(SHENZHEN) CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10 (2013) and the energy emitted by t…

Text truncated - open the document above for the full version.

Report No. ENS2409020130W00201R Page 34 of 66 Ver.1.0 9.5 MAXIMUM PEAK CONDUCTED OUTPUT POWER 9.5.1 Applicable Standard According to FCC Part 15.247(b)(1) and KDB 558074 D01 15.247 MEAS GUIDANCE v05r02 According to IC RSS-247.5.4 and RSS-Gen 6.12 9.5.2 Conformance Limit The max For frequency hopping systems operating in the 2400-2483.5 MHz band employing at least 75 non-overlapping hopping channels: 1 watt. For all other frequency hopping systems in the 2400-2483.5 MHz band: 0.125 watts. 9.5.3 Test Configuration Test according to clause 7.1 radio frequency test setup 1 9.5.4 Test Procedure As an alternative to a peak power measurement, compliance with the limit can be based on a measurement of the maximum conducted output power. Use the following spectrum analyzer settings: Set Span = approximately 5 times the 20 dB bandwidth, centered on a hopping channel(about 8MHz) Set RBW > the 20 dB bandwidth of the emission being measured(about 3MHz) Set VBW  RBW Set Sweep = auto Set Detector function = peak Set Trace = max hold Allow the trace to stabilize. Use the marker-to-peak function to set the marker to the peak of the emissionto determine the peak amplitude level. Test Results Temperature: 25 ̊ C Relative Humidity: 45% ATM Pressure: 1011 mbar Note: N/A Test Mode Antenna Freq(MHz) Conducted Peak Powert[dBm] Conducted Limit[dBm] Verdict DH5 Ant1 2402 -5.06 ≤20.97 PASS 2441 -3.98 ≤20.97 PASS 2480 -3.45 ≤20.97 PASS 2DH5 Ant1 2402 -2.49 ≤20.97 PASS 2441 -1.36 ≤20.97 PASS 2480 -0.9 ≤20.97 PASS 3DH5 Ant1 2402 -1.85 ≤20.97 PASS 2441 -0.75 ≤20.97 PASS 2480 -0.23 ≤20.97 PASS Report No. ENS2409020130W00201R Page 35 of 66 Ver.1.0 DH5_Ant1_2402 DH5_Ant1_2441 DH5_Ant1_2480 Report No. ENS2409020130W00201R Page 36 of 66 Ver.1.0 2DH5_Ant1_2402 2DH5_Ant1_2441 2DH5_Ant1_2480 Report No. ENS2409020130W00201R Page 37 of 66 Ver.1.0 3DH5_Ant1_2402 3DH5_Ant1_2441 3DH5_Ant1_2480 Report No. ENS2409020130W00201R Page 38 of 66 Ver.1.0 9.6 CONDUCTED SUPRIOUS EMISSION 9.6.1 Applicable Standard According to FCC Part 15.247(d) and KDB 558074 D01 15.247 MEAS GUIDANCE v05r02 According to IC RSS-247.5.5 9.6.2 Conformance Limit In any 100 kHz bandwidth outside the frequency band in which the spread spectrum intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted, provided the transmitter demonstrates compliance with the peak conducted power limits. 9.6.3 Test Configuration Test according to clause 7.1 radio frequency test setup 1 9.6.4 Test Procedure The transmitter output (antenna port) was connected to the spectrum analyzer  Reference level measurement Establish a reference level by using the following procedure: Set instrument center frequency to DSS channel center frequency. Set Span = approximately 5 times the 20 dB bandwidth, centered on a hopping channel. Set the RBW = 100 kHz. Set the VBW ≥ 3 x RBW. Set Detector = peak. Set Sweep time = auto couple. Set Trace mode = max hold. Allow trace to fully stabilize. Use the peak marker function to determine the maximum Maximumconducetedlevel. Note that the channel found to contain the maximum conduceted level can be used to establish the reference level.  Band-edge measurement Use the following spectrum analyzer settings: Span = wide enough to capture the peak level of the emission operating on the channel closest to the band-edge, as well as any modulation products which fall outside of the authorized band of operation Set RBW  1% of the span=100kHzSet VBW 3 x RBW Set Sweep = autoSet Detector function = peakSet Trace = max hold Allow the trace to stabilize. Set the marker on the emission at the bandedge, or on the highest modulation product outside of the band, if this level is greater than that at the bandedge. Enable the marker-delta function, then use the marker-to-peak function to move the marker to the peak of the in-band emission. The marker-delta value now displayed must comply with the limit specified in this Section. Now, using the same instrument settings, enable the hopping function of the EUT. Allow the trace to stabilize. Follow the same procedure listed above to determine if any spurious emissions caused by the hopping function also comply with the specified limit.  Emission level measurement Use the following spectrum analyzer settings: Span = wide enough to capture the peak level of the in-band emission and all spurious emissions (e.g., harmonics) from the lowest frequency generated in the EUT up through the 10th harmonic.(30MHz to 25GHz).Set RBW = 100 kHzSet VBW  RBW Set Sweep = autoSet Detector function = peakSet Trace = max hold Allow the trace to stabilize. Set the marker on the peak of any spurious emission recorded. The level displayed must comply with the limit specified in this Section. Report No. ENS2409020130W00201R Page 39 of 66 Ver.1.0 9.6.5 Test Results Temperature: 25 ̊C Relative Humidity: 45% ATM Pressure: 1011 mbar Note: N/A All the antenna(Antenna 1) and modes(GFSK, π/4-DQPSK, 8DPSK, Hopping) mode have been tested, and the worst(Antenna 1,GFSK, Hopping) resultrecorded was report as below: Band edge measurements TestMode Antenna ChName Freq(MHz) RefLevel [dBm] Result [dBm] Limit [dBm] Verdict DH5 Ant1 Low 2402 -5.43 -58.68 ≤-25.43 PASS High 2480 -3.91 -58.39 ≤-23.91 PASS Low Hop_2402 -5.24 -60.02 ≤-25.24 PASS High Hop_2480 -3.85 -59.95 ≤-23.85 PASS 2DH5 Ant1 Low 2402 -5.40 -58.16 ≤-25.4 PASS High 2480 -3.91 -36.97 ≤-23.91 PASS 3DH5 Ant1 Low 2402 -5.44 -47.26 ≤-25.44 PASS High 2480 -3.92 -51.54 ≤-23.92 PASS Report No. ENS2409020130W00201R Page 40 of 66 Ver.1.0 DH5_Ant1_Low_2402 DH5_Ant1_High_2480 DH5_Ant1_Low_Hop_2402 Report No. ENS2409020130W00201R Page 41 of 66 Ver.1.0 DH5_Ant1_High_Hop_2480 2DH5_Ant1_Low_2402 2DH5_Ant1_High_2480 Report No. ENS2409020130W00201R Page 42 of 66 Ver.1.0 3DH5_Ant1_Low_2402 3DH5_Ant1_High_2480 Report N…

Text truncated - open the document above for the full version.

TEST SETUP PHOTOGRAPHS 1.1. Photos of Conducted Emission Measurement 1.2. Photos of Radiation Emission Measurement Spurious Emission Test Setup (Below 1GHz) Spurious Emission Test Setup (Above 1GHz) ----------------The end----------------