2AB5H-P70001Tablet PC

User’s Manual i Care and Safety Information 1. Keep the device and packaging materials out of the reach of infants and children. 2. Avoid subjecting the power adapter and other contacts to dripping or splashing water and dry your hands before you use it. Do not place objects filled with liquids such as vases, etc. on or near the device. 3. Make sure that the used power outlet is always readily available and never hidden. In case of emergency, use the power adapter to separate the device from the power network. 4. Keep your device away from all flames such as candles and do not set them up in the vicinity of the device. 5. Keep the unit at least 10 cm away from other objects. Make sure the ventilation is not covered by newspapers, tablecloths, curtains, etc. 6. For your own safety, do not use the projector during thunderstorms or lightning. 7. Relative Humidity is 5~35°C, 80% (Max.), non-condensing. 8. The battery is integrated with the device. Do not dissemble and modify. The battery should be replaced by qualified service staff only. 9. Ensure that the ambient room temperature is within -10~55°C 10. During the operation, this product may heat lightly, which is normal. 11. Wait before using if the device has been moved from a cold location into a warm one. Any condensation that has formed may in certain circumstances destroy the device. As soon as the device has reached room temperature it can be used without risk. 12. Handle the product with care. Avoid contact with sharp objects. Keep device away from metallic objects. 13. Place the projector on a flat surface. Any collision or falling to the ground is likely to damage the product. 14. Do not drop or disassemble the product otherwise the warranty voids. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 15. Use only the accessories supplied by the manufacturer. 16. Both product and user’s manual are subject to further improvement or supplement without further notice. 17. Avoid facing directly into the projector’s lens. P70 User’s Manual ii Sicherheitshinweise: 1. Das Gerät und das Verpackungsmaterial auß erhalb der Reichweite von Kindern halten. 2. Das Netzteil nicht in Kontakt mit tropfendem oder fließ endem Wasser kommen lassen und Hände vor der Benutzung abtrocknen. Keine mit Flüssigkeiten gefüllte Gegenstände, wie z.B. Vasen usw. auf oder in die Nähe des Gerätes stellen. 3. Stellen Sie sicher, dass die verwendete Steckdose immer verfügbar und niemals blockiert ist. Verwenden Sie im Notfall das Netzteil, um das Gerät vom Stromnetz zu trennen. 4. Das Gerät von Flammen, wie z.B. Kerzen fernhalten und diese nicht in der Nähe des Gerätes aufstellen. 5. Das Gerät mindestens 10 cm von anderen Gegenständen entfernt halten. Stellen Sie sicher, dass die Lüftungsschlitze nicht durch Zeitungen, Tischdecken, Vorhänge usw. blockiert werden. 6. Den Projektor zu Ihrer eigenen Sicherheit nicht während eines Gewitters oder Blitzschlages verwenden. 7. Relative Luftfeuchtigkeit liegt bei 5 bis 35°C, 80% (max.), nicht kondensierend. 8. Der Akku ist im Gerät integriert. Nicht auseinander nehmen oder ändern. Der Akku sollte nur von einer Fachkraft ausgetauscht werden. 9. Stellen Sie sicher, dass die Raumtemperatur innerhalb von -10 ist ~ 55°C liegt. 10. Dieses Produkt kann während des Betriebes etwas warm werden, was normal ist. 11. Warten Sie mit der Verwendung des Geräts etwas, wenn das es von einem kalten an einen warmen Ort gebracht wurde. Kondenswasser kann das Gerät unter bestimmten Umständen zerstören. Sobald das Gerät Raumtemperatur erreicht hat, kann es ohne Risiko verwendet werden. 12. Produkt mit Vorsicht handhaben. Kontakt mit scharfen Gegenständen vermeiden. Von Gegenständen aus Metall fernhalten. 13. Den Projektor auf eine flache Unterlage stellen. Stöße oder ein Herunterfallen auf den Boden führt wahrscheinlich zu Schäden des Produktes. 14. Das Produkt nicht fallen lassen oder auseinander nehmen, da sonst die Gewährleistung erlischt. Das Ö ffnen oder Entfernen von Abdeckungen kann sie gefährlichen Spannungen und anderen Risiken aussetzen. Alle Wartungsarbeiten von Fachpersonal durchführen lassen. 15. Nur vom Hersteller empfohlenes Zubehör verwenden. 16. Sowohl das Produkt als auch das Benutzerhandbuch unterliegen fortlaufenden Verbesserungen oder Ergänzungen ohne vorherige Mitteilung. 17. Nicht direkt in das Objektiv des Projektors sehen. User’s Manual iii Entretien et précaustion d’emploi (FR) 1. Attention - Evitez de vous placer en face de la lentille du vidéo projecteur. 2. Evitez tout contact avec de l’eau, et gardez vos mains sèches lors de l’utilisation. 3. Assurez-vous que la température de la pièce est comprise entre -10 et 55°C 4. Le taux d’humidité relative doit être de 80% au maximum entre 5 et 35°C, sans condensation. 5. Ne pas faire tomber, frapper ou démonter cet appareil ; sinon la garantie sera annulée. معلومات السلامة والرعاية (AR) 1. تحذير- تجنب التعرض بشكل مباشر لعدسة جهاز العرض. 2. تجنب اتصال الجهاز بالماء، والحفاظ على يديك جافتين أثناء الاستخدام. 3. التأكد من أن درجة حرارة الغرفة المحيطة ما بين 10 إلى 55 درجة مئوية. 4. أن تكون الرطوبة النسبية من 5 إلى 35 درجة، بما يعادل 80( %بحد أقصى)، غير مكثفة. 5. لا تسقط أو تثقب أو تقوم بفك الجهاز؛ وإلا بطل حق الضمان. (繁中) 維護及安全資訊 1. 請勿直接面對投影機的鏡頭。 2. 使用中本產品可能略微變熱，此屬正常現象。 3. 請勿於充滿灰塵的環境使用本裝置，塵粒或其他異 物可損壞本產品。 4. 切勿將本裝置強烈搖晃，以免損壞內部零組件。 5. 請使用隨附的電源轉接器。 (简中) 维护及安全资讯 1. 请勿直接面对投影机的镜头。 2. 使用中本产品可能略微变热，此属正常现象。 3. 请勿于充满灰尘的环境使用本装置，尘粒或其他异 物可能损坏本产品。 4. 切勿将本装置强烈摇晃，以免损坏内部零组件。 5. 请使用随附的电源转接器。。 User’s Manual iv FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 o…

Text truncated - open the document above for the full version.

AIPTEK International Inc. Dec. 26, 2014 Federal Communications Commission Authorization and Evaluation Division FCC ID: 2AB5H-P70001 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information applied this application as outlined below: Schematic Theory of Operation Block Diagram Tune-up The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely Hank jiang Staff Engeneer AIPTEK International Inc. Phone: 886-3-5678138 Fax: 886-3-5678569 E-mail: [email protected]

AIPTEK International Inc. Date: Dec 26, 2014 Subject: Ad Hoc Mode Function Declaration FCC ID: 2AB5H-P70001 To Whom it may concern, This device is acting as master and operating on 2.4GHz band. Ad Hoc function is available on client mode and not able to work on non-US frequencies. Please contact the one signed below or the authorized agent for this filing. Thank you. Regards, Sincerely Hank jiang Staff Engeneer AIPTEK International Inc. Phone: 886-3-5678138 Fax: 886-3-5678569 E-mail: [email protected]

FCC ID:2AB5H-P70001 FCC ID:2AB5H-P70001

WIFI/BT Antenna

Shenzhen GTI Technology Co., Ltd. 1F,2 Block, Jiaquan Building, Guanlan High-tech Park Baoan District, Shenzhen, Guangdong, China. Tel: +86-755-27559792 Fax: +86-755-86116468 Report No.: GTI20140326F-2 Page 1 of 62 TEST REPORT Product Name ........................... : PROJECTOR PAD P70 Trademark ................................. : AIPTEK Model/Type reference ............... : P70 Listed Model(s) ......................... : / FCC ID ........................................ : 2AB5H-P70001 Test Standards .......................... : FCC Part 15.247: Operation within the bands 902-928 MHz, 2400-2483.5 MHz and 5725-5850 MHz Applicant ................................... : AIPTEK International Inc. Address of applicant ................ : 2F, No.58, Park Avenue 2nd Rd., Science-Based Industrial Park, Hsinchu 30844, Taiwan, R.O.C. Date of Receipt ......................... : Dec.03, 2014 Date of Test Date ....................... : Feb.11, 2015 - Mar.10, 2015 Data of issue. ............................ : Mar.11, 2015 Test result Pass * * In the configuration tested, the EUT complied with the standards specified above Page 2 of 62 Report No.: GTI20140326F-2 Shenzhen General Testing & Inspection Technology Co., Ltd. 1F, 2 Block, Jiaquan Building, Guanlan High-tech Park Baoan District, Shenzhen, Guangdong, China Tel.: (86)755-27588991 Fax: (86)755-86116468 Http://www.sz-ctc.com.cn GENERAL DESCRIPTION OF EUT Equipment: PROJECTOR PAD P70 Model Name: P70 Manufacturer: AIPTEK International Inc. Manufacturer Address: 2F, No.58, Park Avenue 2nd Rd., Science-Based Industrial Park, Hsinchu 30844, Taiwan, R.O.C. Power Rating: DC 3.7V from battery or DC 5.0V form Input: 100-240V~ 50/60Hz 0.45A Max adapter Output: 5V2.5A Compiled By: (Allen Wang) Reviewed By: (Tony Wang) Approved By: (Walter Chen) This test report consists of 62 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by GTI. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of compiler, reviewer and approver. Any objections must be raised to GTI within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. Page 3 of 62 Report No.: GTI20140326F-2 Shenzhen General Testing & Inspection Technology Co., Ltd. 1F, 2 Block, Jiaquan Building, Guanlan High-tech Park Baoan District, Shenzhen, Guangdong, China Tel.: (86)755-27588991 Fax: (86)755-86116468 Http://www.sz-ctc.com.cn Table of Contents Page 1. SUMMARY ............................................................................................................................................................ 4 1.1. TEST STANDARDS .......................................................................................................................................................... 4 1.2. TEST DESCRIPTION ........................................................................................................................................................ 4 1.3. TEST FACILITY .............................................................................................................................................................. 5 1.4. MEASUREMENT UNCERTAINTY ........................................................................................................................................ 5 2. GENERAL INFORMATION ....................................................................................................................................... 6 2.1. ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 6 2.2. GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 6 2.3. DESCRIPTION OF TEST MODES ........................................................................................................................................ 7 2.4. MEASUREMENT INSTRUMENTS LIST ................................................................................................................................. 7 3. TEST CONDITIONS AND RESULTS ........................................................................................................................... 9 3.1. CONDUCTED EMISSION (AC MAIN) ................................................................................................................................. 9 3.2. RADIATED EMISSION ................................................................................................................................................... 12 3.3. MAXIMUM PEAK OUTPUT POWER ................................................................................................................................ 17 3.4. 20DB BANDWIDTH ..................................................................................................................................................... 21 3.5. BAND EDGE .............................................................................................................................................................. 25 3.6. FREQUENCY SEPARATION ............................................................................................................................................. 41 3.7. NUMBER OF HOPPING FREQUENCY ................................................................................................................................. 43 3.8. TIME OF OCCUPANCY (DWELL TIME) .............................................................................................................................. 45 3.9. SPURIOUS RF CONDUCTED EMISSION ...............................................…

Text truncated - open the document above for the full version.

Radiated Emission (30MHz-1GHz) Radiated Emission (1GHz-25GHz) Conducted Emission