2AB7X-WSP7V1WisePOS Pro, 7MD

The 7MD is a single solution to help organize and manage your store. 7MD currently includes Hand Held Scanner (HHT) features. WHERE IS THE POWER BUTTON? COMING SOON CONTACT WITH QUESTIONS HOW DOES 7 MD UPDATE? 7MD FEATURES: GOT FEATURES: -Ordering + POS/Saf e Counts FUTURE FEATURES: -7MD Checkout -Much more! WHAT DOES 7 MD STAND FOR? 7-Eleven Mobile Device REMAINING HHT FEATURES: -S tore to Store Transfer -P aid In / Out -R eturn to Vendor 7MD updates automatically. When an update is ready, The power button is the small red button on the left side of the 7MD. A short press will lock the device and long 833.429.7669 -I tem Inf ormation -Cycle Count -Shelf Tag Requests -BOH Change 7MD FAQS WHAT IS IT? -S elf Sequence -L ottery Counts -Electr onic Check-I n (ECI)

FCC Supplier’s Declaration of Conformity: WSP74, WSP75, WSP76 Stripe, Inc. 354 Oyster Point Blvd, South San Francisco, CA 94080, USA Internet contact: [email protected] This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. WSP74, WSP75, WSP76 meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. Industry Canada Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. FCC and IC Specific Absorption Rate (SAR) information: The device is designed to meet the requirements for exposure to radio waves established by the Innovation, Science and Economic Development Canada’s and FCC. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body. Product Name: WSP74, WSP75, WSP76 5V 500mA 2.5W, 9V 1.5A 13.5W FCC ID: 2AB7X-WSP7V1 IC: 28493-WSP7V1 IC Statement: CAN ICES-3 (B)/NMB-3(B) © 2023 Stripe, Inc. Déclaration de conformité du fournisseur FCC : WSP74, WSP75, WSP76 Stripe, Inc. 354 Oyster Point Blvd, South San Francisco, CA 94080, USA Coordonnées Internet: [email protected] Cet appareil est conforme à la partie 15 des règles de la FCC. Son fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d'interférences nuisibles et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences susceptibles de provoquer un fonctionnement indésirable. Avertissement : Tout changement ou modification non expressément approuvé(e) par la partie responsable de la conformité pourrait annuler l'autorité de l'utilisateur à faire fonctionner l'équipement. Remarque : cet équipement a été testé et déclaré conforme aux limites d'un appareil numérique de classe B, conformément à la partie 15 des règles de la FCC. Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans une installation résidentielle. Cet équipement génère des utilisations et peut émettre de l'énergie de radiofréquence et, s'il n'est pas installé et utilisé conformément aux instructions, peut causer des interférences nuisibles aux communications radio. Cependant, il n'y a aucune garantie que des interférences ne se produiront pas dans une installation particulière. Si cet équipement cause des interférences nuisibles à la réception radio ou télévision, ce qui peut être déterminé en allumant et en éteignant l'équipement, l'utilisateur est encouragé à essayer de corriger l'interférence par une ou plusieurs des mesures suivantes : - Réorientez ou déplacez le récepteur antenne. - Augmentez la distance entre l'équipement et le récepteur. - Connectez l'équipement à une prise sur un circuit différent de celui auquel le récepteur est connecté. - Consultez le revendeur ou un technicien radio/TV expérimenté pour obtenir de l'aide. Le Stripe Reader WSP74, WSP75, WSP76 répond aux exigences gouvernementales en matière d'exposition aux ondes radio. Les lignes directrices sont basées sur des normes élaborées par des organisations scientifiques indépendantes grâce à une évaluation périodique et approfondie d'études scientifiques. Les normes comprennent une marge de sécurité substantielle conçue pour assurer la sécurité de toutes les personnes, quel que soit leur âge ou leur état de santé. Déclaration d'Industrie Canada Cet appareil contient un ou des émetteurs/récepteurs exempts de licence conformes aux RSS exempts de licence d'Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer d'interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences pouvant entraîner un fonctionnement indésirable de l'appareil. Le fon…

Text truncated - open the document above for the full version.

Hui Zhou Gaoshengda Technology Co.,LTD Confirmation Letter WE, Hui Zhou Gaoshengda Technology Co.,LTD The product: WIFI+BT Module And model No.: WCT1NR2601 FCC ID: 2AC23-WCT1N We declare that the software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master. This includes restrictions on transmissions for beacons and support for ad-hoc peer-to-peer modes. Best Regards Company Name: Hui Zhou Gaoshengda Technology Co.,LTD Contact Name: Hui Guan Title of Person: Manger Address: No.2, Jin-da Road, Huinan High-tech Industrial Park, Huizhou, Guangdong, China Date: 08/28/2024

BBPOS Limited Date: 9/11/2024 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: 2AB7X-WSP7V1 Grantee FRN: 0024375008 1. BBPOS Limited (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. BBPOS Limited (“the applicant”) certifies that, the device does not have cybersecurity and / or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered List installed on the device, nor will it be installed by the applicant anytime after certification. 3. BBPOS Limited (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Queenie Yang Job Title: Product Compliance Engineer Company Name: BBPOS Limited

Stripe, Inc. Date: 8/7/2024 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation Grantee Code: 2AB7X FRN: 0024375008 To whom it may concern: FCC US Agent Contact Person: Jim Thome Company Name: Stripe, Inc. Company Address: 354 Oyster Point Blvd South San Francisco, CA 94080 Email: [email protected] FRN: 0027091149 This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of BBPOS Limited (“the applicant”) for the above referenced Grantee Code. We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely, Name: Jim Thome Manager Company Name: Stripe, Inc.

BBPOS Limited Date: 7/30/2024 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: 2AB7X-WSP7V1 Grantee FRN: 0024375008 BBPOS Limited (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. U.S. Agent Information: Contact Person: Jim Thome Company Name: Stripe, Inc. Company Address: 354 Oyster Point Blvd South San Francisco, CA 94080 Email: [email protected] FRN: 0027091149 Sincerely yours, Name: Queenie Yang Job Title: Product Compliance Engineer Company Name: BBPOS Limited

BBPOS Limited Address: 15/F, Tower 2, Nina Tower, 8 Yeung Uk Road, Tsuen Wan, NT, HK Confirmation Letter We, BBPOS Limited The product: WisePOS Pro, 7MD And model No.: WSP74, WSP75, WSP76 FCC ID: 2AB7X-WSP7V1 IC: 28493-WSP7V1 WSP74, WSP75, WSP76 have the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical construction. WSP74 is the product without accessory, WSP75 is the product with hand strap, WSP76 is the product with pistol grip.All these changes do not degrade the unwanted emissions of the certified product. Company Name: BBPOS Limited Contact Name: Queenie Yang Title of Person: Product Compliance Engineer Address: 15/F, Tower 2, Nina Tower, 8 Yeung Uk Road, Tsuen Wan, NT, HK Date:07/30/2024

BBPOS Limited Date: 07/30/2024 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by: Company Name: BBPOS Limited Contact Name: Queenie Yang Title of Person: Product Compliance Engineer Address: 15/F, Tower 2, Nina Tower, 8 Yeung Uk Road, Tsuen Wan, NT, HK

BBPOS Limited Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2AB7X-WSP7V1 § To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR § 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Tune-up exhibition SOFTWARE SECURITY REQUIREMENTS Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: BBPOS Limited Contact Name: Queenie Yang Title of Person: Product Compliance Engineer Address: 15/F, Tower 2, Nina Tower, 8 Yeung Uk Road, Tsuen Wan, NT, HK Date:07/30/2024

External Photographs Project No.: 4791364876-1 Page 2 of 9 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. External Model:WSP74 Model: WSP75 Page 3 of 9 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Model: WSP76 Page 4 of 9 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 5 of 9 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 6 of 9 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 7 of 9 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 8 of 9 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. External of pistol grip Page 9 of 9 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch.

7MDUS0400002004 2 10-DC-B6-C8-8D-4E 10-DC-B6-C0-8D-4E 015584000724094 2AB7X-WSP7V1 28493-WSP7V1 WSP74.12-SIZZ02-354 WSP74 S/N: WIFI: B T: IMEI2: FCC ID: IC: PCI HW: MODEL: Made in Thailand 7MDUS0400002005 2 10-DC-B6-C8-8D-4E 10-DC-B6-C0-8D-4E 015584000724095 2AB7X-WSP7V1 28493-WSP7V1 WSP75.12-SIZZ02-354 WSP75 S/N: WIFI: B T: IMEI2: FCC ID: IC: PCI HW: MODEL: Made in Thailand 7MDUS0400002006 2 10-DC-B6-C8-8D-4E 10-DC-B6-C0-8D-4E 015584000724096 2AB7X-WSP7V1 28493-WSP7V1 WSP76.12-SIZZ02-354 WSP76 S/N: WIFI: B T: IMEI2: FCC ID: IC: PCI HW: MODEL: Made in Thailand The label is attached to the surface of the shield with a permanent adhesive.

Internal Photographs Project No.: 4791364876-1 Page 2 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. There are three models, WSP74 is the product without accessory, WSP75 is the product with hand strap (non-metal and non-electronics), WSP76 is the product with pistol grip. Photo of pistol grip Page 3 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 4 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal Page 5 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. NFC ant. Div. ant. WiFi/BT ant. Main ant. Page 6 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 7 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 8 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 9 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 10 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 11 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 12 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 13 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 14 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 15 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 16 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 17 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 18 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 19 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 20 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 21 of 21 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch.

NFC antenna size: Frequency (MHz) Antenna Type Antenna Gain (dBi) 13.56 Coil 1 86.92mm Top View 1.57mm 8.53mm 10.5mm 3.8mm 13.12m m 3.8mm 3.33mm 81.61mm 69mm

Date: 2024/7/18 System Performance Check-750MHz Communication System: UID 0, CW (0); Communication System Band: D750 (750.0 MHz); Frequency: 750 MHz; Medium parameters used: f = 750 MHz; σ = 0.892 S/m; ε r = 41.94; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: • Probe: EX3DV4 - SN7733; ConvF(10.45, 10.45, 10.45); Calibrated: 2024/2/21; • Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 • Electronics: DAE4 Sn1739; Calibrated: 2024/1/23 • Phantom: SAM; Type: QD000P40CD; Serial: 1805 • DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Body/Area Scan (7x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.25 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 32.68 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 1.50 W/kg SAR(1 g) = 0.917 W/kg; SAR(10 g) = 0.596 W/kg Maximum value of SAR (measured) = 1.28 W/kg Date: 2024/8/7 System Performance Check-835MHz Communication System: UID 0, CW (0); Communication System Band: D835 (835.0 MHz); Frequency: 835 MHz; Medium parameters used: f = 835 MHz; σ = 0.883 S/m; ε r = 40.1; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: • Probe: EX3DV4 - SN7733; ConvF(10.05, 10.05, 10.05); Calibrated: 2024/2/21; • Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -9.0, 31.0 • Electronics: DAE4 Sn1739; Calibrated: 2024/1/23 • Phantom: SAM; Type: QD000P40CD; Serial: 1805 • DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Body/Area Scan (5x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.33 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 34.77 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 1.66 W/kg SAR(1 g) = 1.02 W/kg; SAR(10 g) = 0.659 W/kg Maximum value of SAR (measured) = 1.43 W/kg Date: 2024/7/30 System Performance Check-1800MHz Communication System: UID 0, CW (0); Communication System Band: D1800 (1800.0 MHz); Frequency: 1800 MHz; Medium parameters used: f = 1800 MHz; σ = 1.425 S/m; ε r = 39.94; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: • Probe: EX3DV4 - SN7733; ConvF(8.76, 8.76, 8.76); Calibrated: 2024/2/21; • Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 • Electronics: DAE4 Sn1739; Calibrated: 2024/1/23 • Phantom: SAM; Type: QD000P40CD; Serial: 1805 • DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Body/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 4.39 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 48.52 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 6.77 W/kg SAR(1 g) = 3.89 W/kg; SAR(10 g) = 2.04 W/kg Maximum value of SAR (measured) = 5.88 W/kg Date: 2024/7/31 System Performance Check-1800MHz Communication System: UID 0, CW (0); Communication System Band: D1800 (1800.0 MHz); Frequency: 1800 MHz; Medium parameters used: f = 1800 MHz; σ = 1.425 S/m; ε r = 39.94; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: • Probe: EX3DV4 - SN7733; ConvF(8.76, 8.76, 8.76); Calibrated: 2024/2/21; • Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 • Electronics: DAE4 Sn1739; Calibrated: 2024/1/23 • Phantom: SAM; Type: QD000P40CD; Serial: 1805 • DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Body/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 5.09 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 50.97 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 6.56 W/kg SAR(1 g) = 3.82 W/kg; SAR(10 g) = 2.01 W/kg Maximum value of SAR (measured) = 5.77 W/kg Date: 2024/7/30 System Performance Check-1900MHz Communication System: UID 0, CW (0); Communication System Band: D1900 (1900.0 MHz); Frequency: 1900 MHz; Medium parameters used: f = 1900 MHz; σ = 1.35 S/m; ε r = 41.23; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: • Probe: EX3DV4 - SN7733; ConvF(8.45, 8.45, 8.45); Calibrated: 2024/2/21; • Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 • Electronics: DAE4 Sn1739; Calibrated: 2024/1/23 • Phantom: SAM; Type: QD000P40CD; Serial: 1805 • DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Body/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 3.98 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 47.10 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 6.95 W/kg SAR(1 g) = 3.67 W/kg; SAR(10 g) = 1.88 W/kg Maximum value of SAR (measured) = 5.79 W/kg Date: 2024/7/19 System Performance Check-2300MHz Communication System: UID 0, CW (0); Communication System Band: D2300 (2300.0 MHz); Frequency: 2300 MHz; Medium parameters used: f = 2300 MHz; σ = 1.683 S/m; ε r = 38.93; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: • Probe: EX3DV4 - SN7733; ConvF(8.3, 8.3, 8.3); Calibrated: 2024/2/21; • Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -9.0, 31.0 • Electronics: DAE4 Sn1739; Calibrated: 2024/1/23 • Phantom: SAM; Type: QD000P40CD; Serial: 1805 • DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/D2450V2/Area Scan (7x9x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 5.85 W/kg Configuration/D2450V2/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 47.96 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 10.3 W/kg SAR(1 g) = 5 W/kg; SAR(10 g) = 2.36 W/kg Maximum value of SAR (measured) = 8.33 W/kg Date: 2024/8/7 System Performance Check-2450MHz Communication System: UID 0, CW (0); Communication System Band: D2450 (2450.0 MHz); Frequency: 2450 MHz; Medium parameters used: f = 2450 MHz; σ = 1.748 S/m; ε r = 37.88; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: • Prob…

Text truncated - open the document above for the full version.

Date: 2024/8/7 GSM 850 Communication System: UID 0, GPRS 4TS (0); Communication System Band: GSM 850 ; Frequency: 836.6 MHz; Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.883 S/m; ε r = 40.099; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: • Probe: EX3DV4 - SN7733; ConvF(10.05, 10.05, 10.05); Calibrated: 2024/2/21; • Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -49.0, 31.0 • Electronics: DAE4 Sn1739; Calibrated: 2024/1/23 • Phantom: SAM; Type: QD000P40CD; Serial: 1805 • DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Body/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.14 W/kg Configuration/Body/Zoom Scan (5x6x4)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 37.29 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 1.49 W/kg SAR(1 g) = 0.810 W/kg; SAR(10 g) = 0.511 W/kg Maximum value of SAR (measured) = 1.15 W/kg Date: 2024/7/30 GSM 1900 Communication System: UID 0, GPRS 4TS (0); Communication System Band: GSM 1900; Frequency: 1850.2 MHz; Medium parameters used (interpolated): f = 1850.2 MHz; σ = 1.494 S/m; ε r = 40.003; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: • Probe: EX3DV4 - SN7733; ConvF(8.45, 8.45, 8.45); Calibrated: 2024/2/21; • Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -49.0, 31.0 • Electronics: DAE4 Sn1739; Calibrated: 2024/1/23 • Phantom: SAM; Type: QD000P40CD; Serial: 1805 • DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Body/Area Scan (11x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.971 W/kg Configuration/Body/Zoom Scan (5x5x4)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 6.408 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 1.68 W/kg SAR(1 g) = 0.765 W/kg; SAR(10 g) = 0.369 W/kg Maximum value of SAR (measured) = 1.19 W/kg Date: 2024/7/31 WCDMA B2 Communication System: UID 0, UMTS-FDD(WCDMA) (0); Communication System Band: Band 2; Frequency: 1852.4 MHz; Medium parameters used (interpolated): f = 1852.4 MHz; σ = 1.494 S/m; ε r = 39.909; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: • Probe: EX3DV4 - SN7733; ConvF(8.45, 8.45, 8.45); Calibrated: 2024/2/21; • Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -49.0, 31.0 • Electronics: DAE4 Sn1739; Calibrated: 2024/1/23 • Phantom: SAM; Type: QD000P40CD; Serial: 1805 • DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Body/Area Scan (11x15x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.769 W/kg Configuration/Body/Zoom Scan (5x5x4)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz…

Text truncated - open the document above for the full version.