2ABBZ-RF-ROR-V3-319RF-ROR-V3-319-NN

**SPECIFICATION** **DATE: 04/08/2022** **Article Name:** Art Paper Label **Code:** CLA8U **Construction** - **Face:** Art Paper (Coated Paper) - **Adhesive:** Emulsion Type Acrylic Adhesive - **Liner:** Kraft Release Paper ### Surface Material | Item | Unit | Value | |-----------------------|---------------|----------------| | **Material** | — | Art Paper (Coated Paper) | | **Base Weight** | g/m² | 80 | | **Tensile Strength (MD)** | kgf/15mm | 4.5↑ | | **Color** | — | White | ### Liner | Item | Unit | Value | |-----------------------|---------------|----------------| | **Material** | — | Kraft Release Paper | | **Base Weight** | g/m² | 95 | | **Tensile Strength (MD)** | kgf/25mm | — | | **Color** | — | Yellow | ### Physical Properties | Property | Unit | Value | |-----------------------------------|-------------------|--------------------| | **Adhesive Base** | — | Emulsion Acrylic | | **Initial Tack** | #7/cm | 1~7 | | **180° Peel Adhesion (To Steel)** | kgf/25mm | 1.2~3.0 | | **Release Force** | gf/25mm | 2~7 | | **Labeling Temperature** | °C | 0~40 | | **Service Temperature** | °C | -20~80 | | **Total Base Weight** | g/m² | 105±10 | | **Total Thickness** | mm | — | **Remarks:** Preservation condition: 23±2°C (73.4±3.6°F), 65±5% RH. Storage life of the product is 12 months from the manufacturing date. Customers must still test and confirm the product according to their actual operational requirements and purpose, or inform us to provide further introduction and service. **Manufacturer:** SYMBIO, INC. (四維精密材料股份有限公司) This is a complete, accurate English translation of the original Chinese-English specification sheet (CLA8U). All technical terms, units, and values have been preserved exactly as shown in the document.

ID LABEL RF-ROR-V3-319

This report must not be used to claim product certification, approval, or endorsement by A2LA, NIST, or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. CINCH Systems RF-ROR-V3-319 MHz FCC 1.1307:2026 FCC 2.1091:2026 Periodic Report: CINC0072.1, Issue Date: June 03, 2026 TABLE OF CONTENTS 2023.04.17 Section Page Number Certificate of Evaluation .................................................................................. 3 Revision History .............................................................................................. 4 Facilities .......................................................................................................... 5 Product Description ......................................................................................... 6 Exposure Condition ......................................................................................... 7 Exemption from RF Exposure Evaluation ....................................................... 8 End of Report .................................................................................................. 11 Report No. CINC0072.12/11 CERTIFICATE OF EVALUATION 2018-09-14 EXRPT.2025.09.03.0 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing Last Date of Evaluation: June 02, 2026 CINCH Systems EUT: RF-ROR-V3-319 MHz RF Exposure Evaluation Standards Specification Method FCC 1.1307:2026 FCC 2.1091:2026 FCC 1.1307:2026 Results Method Clause Description Applied Results Comments (b)(3)(i)(B) Exemption From RF Exposure Evaluation Yes Compliant None Deviations From Evaluation Standards None Approved By: Donald Facteau, Process Architect Report No. CINC0072.13/11 REVISION HISTORY 2025.07.22 Revision Number Description Date (yyyy-mm-dd) Page Number 00 None Report No. CINC0072.14/11 FACILITIES 2025.07.17 Testing was performed at the following location(s) Location Labs (1) Address A2LA (2) ISED (3) BSMI (4) VCCI (5) CAB FDA (6) ☐ California OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 3310.04 2834B SL2-IN-E-1154R A-0029 US0158 TL-55 ☐ Minnesota MN01-11 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612) 638-5136 3310.05 2834E SL2-IN-E-1152R A-0109 US0175 TL-57 ☒ Oregon EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 3310.02 2834D SL2-IN-E-1017 A-0108 US0017 TL-56 ☐ Washington NC01-05 19201 120th Ave NE Bothell, WA 98011 (425) 984-6600 3310.06 2834F SL2-IN-E-1153R A-0110 US0157 TL-67 ☐ Offsite N/A See Product Description N/A N/A N/A N/A N/A N/A See data sheets for specific labs (1) The lab designations denote individual rooms within each location. (OC01, OC02, OC03, etc.) (2) A2LA Certificate No. (3) ISED Company No. (4) BSMI No. (5) VCCI Site Filing No. (6) FDA ASCA No. Report No. CINC0072.15/11 PRODUCT DESCRIPTION 2018-07-17 Client and Equipment Under Evaluation Information Company Name: CINCH Systems Address: 12075 43rd Street NE STE 300 City, State, Zip: St. Michael, MN 55376 Evaluation Requested By: Mark Cawley EUT: RF-ROR-V3-319 MHz Date of Evaluation: 6/02/2026 Information Provided by the Party Requesting the Evaluation Functional Description of the Equipment: Model RF-ROR is a heat detector interfacing wirelessly to a fire & security panel to provide property protection. The transmitter operates at a frequency of 319.5MHz and utilizes AM modulation (OOK). Alarm and supervisory data is transmitted with the control signal. Objective: To demonstrate compliance with FCC Requirements for RF exposure for 1.1307 RF exempt devices Report No. CINC0072.16/11 RF EXPOSURE CONDITION 2018-07-17 The following RF Exposure conditions were used for the assessment documented in this report: Intended Use Mobile Location on Body (if applicable) NA How is the Device Used The EUT is mounted to the ceiling. Radios Contained in the Same Host Device Periodic Simultaneous Transmitting Radios None Body Worn Accessories N/A Environment General Population/Uncontrolled Exposure Report No. CINC0072.17/11 EXEMPTION FROM RF EXPOSURE EVALUATION EXRPT.2025.09.03.0 OVERVIEW Section 1.3 of KDB 44798 D04 v01 states that, “Under the new rules, all radio services and operations are subject to Routine Evaluation [§§ 1.1307(b)(1), 2.1033(f), etc.], unless shown to qualify under the exemptions provided in the rules and OET Lab policies for equipment authorization.” The glossary of KDB 447498 D04 v01 specifies that an exempt RF device is defined “solely from the obligation to perform a routine environmental evaluation to demonstrate compliance with the RF exposure limits in § 1.1310; it is not exemption from the equipment authorization procedures described in 47 CFR Part 2, not exemption from general obligations of compliance with the RF exposure limits in § 1.1310 of this chapter, and not exemption from determination of whether there is no significant effect on the quality of the human environment under § 1.1306.” Compliance with the exemption criteria defined in 1.1307(b) confirm compliance with the limits …

Text truncated - open the document above for the full version.

This report is Blockchain Verified. To verify the report’s authenticity, please visit https://www.blockchain-verified.com/ or by clicking the logo to the right. CINCH Systems RF-ROR-V3-319 FCC 15.231:2026 RSS-210 Issue 11:2024 RSS-Gen Issue 5:2018+A1:2019+A2:2021 Periodic Radio Report: CINC0072.0 Rev. 01, Issue Date: May 18, 2026 TABLE OF CONTENTS 2023.04.17 Section Page Number Certificate of Test ............................................................................................ 3 Revision History .............................................................................................. 5 Facilities .......................................................................................................... 6 Measurement Uncertainty ............................................................................... 7 Test Setup Block Diagrams ............................................................................. 8 Product Description ......................................................................................... 11 Power Settings and Antennas ......................................................................... 12 Configurations ................................................................................................. 13 Modifications ................................................................................................... 14 Field Strength of Fundamental ........................................................................ 15 Spurious Radiated Emissions ......................................................................... 18 Emissions Bandwidth ...................................................................................... 27 Duty Cycle ....................................................................................................... 30 Occupied Bandwidth ....................................................................................... 33 End of Report .................................................................................................. 36 Report No. CINC0072.0 Rev 012/36 CERTIFICATE OF TEST 2022.04.01 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing. Last Date of Test: April 7, 2026 CINCH Systems EUT: RF-ROR-V3-319 Radio Equipment Testing Standards Specification Method FCC 15.231:2026 ANSI C63.10:2020 Cor.1:2023 RSS-210 Issue 11:2024 ANSI C63.10-2020 Cor.1:2023+C63.10a:2024 + Errata to C63.10a:2024 RSS-Gen Issue 5:2018+A1:2019+A2:2021 Results Test Description Result FCC Section(s) RSS Section(s) ANSI C63.10 Section(s) Comments Powerline Conducted Emissions (Transmitter) N/A 15.207 RSS-Gen 8.8 6.2 Not required, battery powered product. Field Strength of Fundamental Pass 15.231(b) RSS-210 A1.3 6.5, 6.6 Spurious Radiated Emissions Pass 15.231(b) RSS-210 A1.3 6.4, 6.5, 6.6 Emissions Bandwidth Pass 15.231(c) N/A 6.9.2 Occupied Bandwidth Pass N/A RSS-210 A1.4 6.9.3 Periodic Technical Requirements N/A 15.231(a) RSS-210 A1.2 7.4e Not required to test. If applicable, this is addressed by an attestation in the equipment theory of operation. Duty Cycle Pass 15.231 RSS-210 A1.2 7.5 Powerline Conducted Emissions (Receiver) N/A 15.101, 15.107 RSS-Gen 7.2 ANSI C63.4 - 12.2.4 Not required, battery powered product. Radiated Emissions for Receiver N/A 15.101, 15.109 RSS-Gen 7.3 ANSI C63.4 - 12.2.5 Not included per FCC 15.101 as this will be covered under SDoC rules for the FCC. RSS-Gen section 7 stated receiver requirements only apply to standalone receivers operating in the 30-960 MHz band and this is not a standalone receiver. Deviations From Test Standards None Report No. CINC0072.0 Rev 013/36 CERTIFICATE OF TEST 2022.04.01 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing. Approved By: Jeff Alcoke, Senior EMC Test Engineer Signed for and on behalf of Element Report No. CINC0072.0 Rev 014/36 REVISION HISTORY 2025.07.22 Revision Number Description Date (yyyy-mm-dd) Page Number 01 Updated restricted bands for ISED and added note to comments section. 2026-05-18 18-20 Updated to '15.231(b)' and 'RSS-210 A1.3' for Fundamenta…

Text truncated - open the document above for the full version.

1 RF-ROR-V3-319 Antenna Info Overview: • Antenna description: The antenna is a brass rod shaped in a circular form, and used in a monopole arrangement. The Antenna is permanently attached to the PCBA. The Antenna does not use a reverse polarity connector. Antenna Drawing Antenna design/Simulation data: • Frequency 319.500 MHz • Circumference 137.16mm • Total Length 153.67mm • Width 1.60 mm • Quarter Wavelength 0.2232 Meters • Radiation Resistance 0.53 Ohms