2ABC5-E0002Android Tablet

SIZE:130x185MM Material: 80g writing paper, black and white printing, double-sided printing, folding 1)Do not push objects into holes and ventilation slots. Do not expose this product to moisture or place any objects l ed with liquids on or near the product. Do not place a naked ame sou ce, such as lighted candles, on or near this product. Do not store or operate the device in environments where the temperature is above 50 degrees celsius or below -10 degrees celsius. Do not intentionally hit the device or place heavy or sharp objects on the device. Only use accessories specied by the manu acturer. Keep the device away from benzene, diluents, and other chemicals. Do not attempt to repair this product yourself. Always use a qualied se vice agent to perform adjustments or repairs. 10.1" Exterior Components11.6" Exterior Components 11.6"产品介绍 INTERACTIVE DIGITAL SIGNAGE Package Contents 1 2 6 No No Function Function 3 4 5 10 11 12 13/14 15/16 USB 2.0 host Vol+/Vol-button This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed of at the end of its life separately from your household waste. There are separate collection systems for recycling in your country. For more information, please contact the local authority or your retailer where you purchased the product. SD Card USB 2.0 host Camera Please make sure all of the following are present when you unpack your INTERACTIVE DIGITAL SIGNAGE 1 246810 111315 12141617 18 3579 Serial port RJ45-with POE 7 Micro USB OTG 8 17 kensington Lock Speaker 9 18 3.5mm audio jack with micphone HDMI output DC in power supply port Power button Home button Bright+/Bright-button 摄像头 255.00mm29.00mm 218.00mm 136.50mm172.00mm 18 75.00mm VESA:75*75mm 75.00mm 1 2 6 3 4 5 10 11 12 13/14 15/16 USB 2.0 host 音量+/音量- 音量+/音量- SD 卡 SD 卡 USB 2.0 host 1 246810 111315 12141617 18 3579 串口 串口 RJ45（带POE)RJ45（带POE) 7 Micro USB OTG 8 17 防盗锁孔 防盗锁孔 喇叭 喇叭 9 18 3.5mm 耳机孔带麦克风3.5mm 耳机孔带麦克风 HDMI 输出 电源插孔电源插孔 电源键电源键 主页主页 亮度+/亮度- 255.00mm29.00mm 218.00mm 136.50mm172.00mm 18 75.00mm VESA:75*75mm 75.00mm 1 1 2 6 No No Function Function 3 4 5 10 11 12 13/14 USB 2.0 host Vol+/Vol- button SD Card USB 2.0 host Camera Serial port RJ45-with POE 7 Micro USB OTG 8 15 kensington Lock Speaker 9 16 VESA:75*75mm 17 3.5mm audio jack with micphone HDMI output DC in power supply port Power button Home button 289.10mm 30.50mm 186.80mm144.47mm 256.70mm 75.00mm 75.00mm Features Copyright Information All intellectual property rights in this publication are owned by and protected by applicable copyright laws and international treaty provisions. retains all rights not expressly granted. No part of this publication may be reproduced in any form whatsoever or used to make any derivative work without prior written approval by . Reserves the right to revise this publication, and/or make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time without prior notice. The information in this document is provided in good faith, but without any representation or warranty whatsoever, whether it is accurate,or complete or otherwise, and on express understanding that shall have no liability whatsoever to other parties in any way arising from or relating to the information or its use. All other trademarks are the property of their respective owners. Other company and brand products and service names are trademarks or registered trademarks of their respective holders. This device complies with CE and FCC regulations. Important Notices 10.1"产品介绍 前言 感谢您选用智能交互数字标牌！ 开机之前，请仔细阅读此使用手册，了解本机的使用方法及注意事项。 敬告 ★ 仅能使用原厂提供的电源适配器配件。 ★ 机器上的缝隙和开口用于通风和散热，请勿堵塞或掩盖这些缝隙和开口。 ★ 切勿在多尘、潮湿、高温的环境下使用或存放本机。 ★ 机器故障时，请勿自行拆解维修，需联系原厂或经销商解决。 ★ 避免踩踏电源线或者电源适配器，以免线损造成漏电等危险。如果电源适配器的导线已 损坏, 请勿继续使用，否则可能会发生危险。 ★ 雷雨天气或者长时间不使用本机时，请拔掉电源插头。 ★ 使用时，请不要将机器放在桌子边缘或小孩容易接触到的地方，避免机器摔损或伤害到 小孩。 ★ 运输或使用过程中尽量不触碰显示屏，切勿用力挤压显示屏，不要用利器或硬物碰伤显 示屏，以免造成显示屏破损。 ★ 请使用干燥的软布或略蘸柔性清洁剂的软布清洁机器。请勿使用任何种类的溶剂, 如酒 精或汽油，否则可能损坏表面处理层。 功能特点 使 用 手册 10.1” /11.6” 智能交互数字标牌 智能交互数字标牌 包装清单 打开包装后，请确认下面的包装内容. 电源适配器说明书 10.1"分辨率(1280*800)/11.6"分辨率(1920*1080) 支持4K超高清视频播放 四核,Cortex A17,1.8G,RK3288 2GB缓存 超大内存16GB 安卓5.1/8.1 10点电容式触摸 摄像头前置2.0M Wifi 802.11b/g/n 蓝牙4.0 RJ45 以太网口(带POE功能） 串口(USB) Micro USB OTG USB host*2 HDMI 输出 3.5mm立体声耳机输出＋麦克风 SD card VESA:75x75mm 内置电池:5000MAH/3.7V (可选） 电源适配器: 12V/1.5A 10.1” /11.6” INTERACTIVE DIGITAL SIGNAGE User Manual 10.1” /11.6” INTERACTIVE DIGITAL SIGNAGE User Manual User manual Power adapter 使 用 手册 10.1” /11.6” 智能交互数字标牌 10.1"LCD IPS panel/11.6"LCD panel 1.01”Resolution (1280*800)/11.6”Resolution1920*1080 Quad core cortex A17,1.8G,RK3288 RAM 2GB Internal memory 16GB Android 5.1/8.1 10-Point capacitive touch 2.0M/P,Front camera Bluetooth 4.0 WiFi 802.11b/g/n RJ45 ethernet with POE SD card,support up to 32GB Serial port USB Host*2 Micro USB OTG 3.5mm earphone +micphone HDMI output Battery:5000mah/3.7V(Optional) 2*1.5W speaker VESA：75x75mm Adapter:12V/1.5A 246810 1112131415 17 1616 3579 序号 序号 功能 功能 摄像头 1 1 2 6 3 4 5 10 11 12 13/14 USB 2.0 host USB 2.0 host 7 Micro USB OTG 8 15 9 16 VESA:75*75mm 17 HDMI 输出 289.10mm 30.50mm 186.80mm144.47mm 256.70mm 75.00mm 75.00mm 246810 1112131415 17 1616 3579 序号 序号 功能 功能 Model：WF1022T FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy a…

Text truncated - open the document above for the full version.

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Declaration on Model Differences We, SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Building 2, Yingfeng Industrial Zone, Tantou Community, Songgang Street, Bao'an, Shenzhen, China Declare that the following product(s): Product Name:Android Tablet Model No.:WF1022T, WF8382T, WF1172T, WF1332T, WF1342T, WF1412T, WF1562T, WF1522T, WF1732T, WF1852T, NXST19, NXST22, WF2152T, WF2105T, WF2132T, WF2402T, WF2702T, WF3202T, WF4302T, WF5502T FCC ID:2ABC5-E0002 Utilize the identical circuit design, PCB layout, shielding and interface with(WF3203T), only the appearance color different. Therefore this application can be regarded as identical in performance to the submitted test sample. The manufacturer would take all the responsibilities for the above product(s). For and on behalf of Shenzhen, China Authorized personLocation Name:Yonghong Li Position:Manager Date of issue:2020-05-19 *I hereby declare that I am entitled to sign on behalf of the applicant and that the information supplied is correct and complete.

SHENZHENELECTRONTECHNOLOGYCO.,LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020/04/27 Subject; Request for Confidentiality FCC ID: 2ABC5-E0002 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description FCC Software Configuration Control Declaration In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Yonghong Li Title: Manager

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Letter of Authorization Company: SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Address: Building 2, Yingfeng Industrial Zone, Tantou Community, Songgang Street, Bao'an, Shenzhen, China Product Name: Android Tablet Model Number(s): WF1022T, WF8382T, WF1172T, WF1332T, WF1342T, WF1412T, WF1562T, WF1522T, WF1732T, WF1852T, NXST19, NXST22, WF2152T, WF2105T, WF2132T, WF2402T, WF2702T, WF3202T, WF4302T, WF5502T Product Description: Android Tablet We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 19/05/2020 Name:Yonghong Li Title:Manager Company: SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.

FCC ID: 2ABC5-E0002

Label Location:

Product Name: Android Tablet Model No.: WF1022T FCC ID: 2ABC5-E0002 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2ABC5-E0002 ANT

RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b) FCC ID: 2ABC5-E0002 EUT Specification EUTAndroid Tablet Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.24GHz WLAN: 5.745GHz ~ 5.825GHz Others: 2.402GHz~2.480GHz (BLE) Device category Portable (<20cm separation) Mobile (>20cm separation) Others ___ Exposure classificationOccupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure (S=1mW/cm2) Antenna diversitySingle antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output powerWiFi 2.4GHz : 13.49dBm (0.0223W) BLE: -1.399dBm (0.0007W) Antenna gain (Max)1.5 dBi Evaluation applied MPE Evaluation SAR Evaluation Limits for Maximum Permissible Exposure(MPE) Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density(mW/cm 2 ) Average Time (A) Limits for Occupational/Control Exposures 300-1500----F/3006 1500-100000----56 (B) Limits for General Population/Uncontrol Exposures 300-1500----F/15006 1500-100000----130 Friis transmission formula: Pd=(Pout*G)\(4*pi*R2) Where Pd= Power density in mW/cm 2 Pout=output power to antenna in Mw G= gain of antenna in linear scale Pi=3.1416 R= distance between observation point and center of the radiator in cm Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Measurement Result 2.4GHz WiFi & BT: Operating Mode Channel Frequency Measured Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm 2 ) (MHz)(dBm)(dBm)(dBm)(dBi)(mW/ cm 2 ) 802.11b 241212.16 12.16±113.161.50.00581 243711.75 11.75±112.751.50.00531 246211.16 11.16±112.161.50.00461 802.11g 241213.25 13.25±114.251.50.00751 243713.29 13.29±114.291.50.00751 246212.74 12.74±113.741.50.00661 802.11n (HT20) 241212.70 12.70±113.701.5 0.0066 1 243713.49 13.49±114.491.50.00791 246212.61 12.61±113.611.50.00651 BLE 2402-1.399 -1.399±1 -0.3991.50.00031 2440-2.010 -2.010±1 -1.0101.50.00021 2480-2.813 -2.813±1 -1.8131.50.00021

Report No.: 18220WC00043901FCC ID: 2ABC5-E0002Page 1 of 68 Code:AB-RF-05-a FCC TEST REPORT Client Name: SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Address: Building 2, Yingfeng Industrial Zone, Tantou Community, Songgang Street, Bao'an, Shenzhen, China Product Name: Android Tablet Date: May 18, 2020 Shenzhen Anbotek Compliance Laboratory Limited Report No.: 18220WC00043901FCC ID: 2ABC5-E0002Page 2 of 68 Code:AB-RF-05-a Contents 1. General Information ............................................................................................................................................... 5 1.1. Client Information ....................................................................................................................................... 5 1.2. Description of Device (EUT) ..................................................................................................................... 5 1.3. Auxiliary Equipment Used During Test ................................................................................................... 6 1.4. Description of Test Modes ........................................................................................................................ 6 1.5. List of channels ........................................................................................................................................... 7 1.6. Description Of Test Setup ......................................................................................................................... 8 1.7. Test Equipment List .................................................................................................................................... 9 1.8. Measurement Uncertainty ....................................................................................................................... 10 1.9. Description of Test Facility ...................................................................................................................... 10 2. Summary of Test Results ................................................................................................................................... 11 3. Conducted Emission Test ................................................................................................................................... 12 3.1. Test Standard and Limit .......................................................................................................................... 12 3.2. Test Setup .................................................................................................................................................. 12 3.3. Test Procedure .......................................................................................................................................... 12 3.4. Test Data .................................................................................................................................................... 12 4. Radiation Spurious Emission and Band Edge ................................................................................................ 17 4.1. Test Standard and Limit .......................................................................................................................... 17 4.2. Test Setup .................................................................................................................................................. 17 4.3. Test Procedure .......................................................................................................................................... 18 4.4. Test Data .................................................................................................................................................... 19 5. Maximum Peak Output Power Test .................................................................................................................. 28 5.1. Test Standard and Limit .......................................................................................................................... 28 5.2. Test Setup .................................................................................................................................................. 28 5.3. Test Procedure .......................................................................................................................................... 28 5.4. Test Data .................................................................................................................................................... 28 6. 6DB Occupy Bandwidth Test ............................................................................................................................. 32 6.1. Test Standard and Limit .......................................................................................................................... 32 6.2. Test Setup ............................................................................................................................... ................... 32 6.3. Test Procedure .......................................................................................................................................... 32 6.4. Test Data .................................................................................................................................................... 32 7. Power Spectral Density Test .............................................................................................................................. 39 7.1. Test Standard and Limit .......................................................................................................................... 39 7.2. Test Setup .................................................................................................................................................. 39 7.3. Test Procedure ..........................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: 18220WC00043902FCC ID: 2ABC5-E0002Page 1 of 40 Code:AB-RF-05-a FCC TEST REPORT Client Name: SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Address: Building 2, Yingfeng Industrial Zone, Tantou Community, Songgang Street, Bao'an, Shenzhen, China Product Name: Android Tablet Date: May 18, 2020 Shenzhen Anbotek Compliance Laboratory Limited Report No.: 18220WC00043902FCC ID: 2ABC5-E0002Page 2 of 40 Code:AB-RF-05-a Contents 1. General Information ............................................................................................................................................... 5 1.1. Client Information ....................................................................................................................................... 5 1.2. Description of Device (EUT) ..................................................................................................................... 5 1.3. Auxiliary Equipment Used During Test ................................................................................................... 6 1.4. Description of Test Modes ........................................................................................................................ 6 1.5. List of channels ........................................................................................................................................... 6 1.6. Description Of Test Setup ......................................................................................................................... 7 1.7. Test Equipment List .................................................................................................................................... 8 1.8. Measurement Uncertainty ......................................................................................................................... 9 1.9. Description of Test Facility ........................................................................................................................ 9 2. Summary of Test Results ................................................................................................................................... 10 3. Conducted Emission Test ................................................................................................................................... 11 3.1. Test Standard and Limit .......................................................................................................................... 11 3.2. Test Setup .................................................................................................................................................. 11 3.3. Test Procedure .......................................................................................................................................... 11 3.4. Test Data .................................................................................................................................................... 11 4. Radiation Spurious Emission and Band Edge ................................................................................................ 16 4.1. Test Standard and Limit .......................................................................................................................... 16 4.2. Test Setup .................................................................................................................................................. 16 4.3. Test Procedure .......................................................................................................................................... 17 4.4. Test Data .................................................................................................................................................... 18 5. Maximum Peak Output Power Test .................................................................................................................. 26 5.1. Test Standard and Limit .......................................................................................................................... 26 5.2. Test Setup .................................................................................................................................................. 26 5.3. Test Procedure .......................................................................................................................................... 26 5.4. Test Data .................................................................................................................................................... 26 6. 6DB Occupy Bandwidth Test ............................................................................................................................. 29 6.1. Test Standard and Limit .......................................................................................................................... 29 6.2. Test Setup ............................................................................................................................... ................... 29 6.3. Test Procedure .......................................................................................................................................... 29 6.4. Test Data .................................................................................................................................................... 29 7. Power Spectral Density Test .............................................................................................................................. 32 7.1. Test Standard and Limit .......................................................................................................................... 32 7.2. Test Setup .................................................................................................................................................. 32 7.3. Test Procedure ........................................................................................................................…

Text truncated - open the document above for the full version.

PHOTOSOFTESTSETUP FCC ID: 2ABC5-E0002 Photo of PowerLine Conducted Emission Test Photo of Radiation Emission Test