2ABC5-E0004Android Tablet

SIZE:130x185MM Material: 80g writing paper, black and white printing, folding 1)Do not push objects into holes and ventilation slots. Do not expose this product to moisture or place any objects l ed with liquids on or near the product. Do not place a naked ame sou ce, such as lighted candles, on or near this product. Do not store or operate the device in environments where the temperature is above 50 degrees celsius or below -10 degrees celsius. Do not intentionally hit the device or place heavy or sharp objects on the device. Only use accessories specied by the manu acturer. Keep the device away from benzene, diluents, and other chemicals. Do not attempt to repair this product yourself. Always use a qualied se vice agent to perform adjustments or repairs. Exterior Components MEDICAL INDUSTRY DIGITAL SIGNAGE Package Contents This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed of at the end of its life separately from your household waste. There are separate collection systems for recycling in your country. For more information, please contact the local authority or your retailer where you purchased the product. User Manual User manual Power adapter Please make sure all of the following are present when you unpack your MEDICAL INDUSTRY DIGITAL SIGNAGE User Manual Features Copyright Information All intellectual property rights in this publication are owned by and protected by applicable copyright laws and international treaty provisions. retains all rights not expressly granted. No part of this publication may be reproduced in any form whatsoever or used to make any derivative work without prior written approval by . Reserves the right to revise this publication, and/or make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time without prior notice. The information in this document is provided in good faith, but without any representation or warranty whatsoever, whether it is accurate,or complete or otherwise, and on express understanding that shall have no liability whatsoever to other parties in any way arising from or relating to the information or its use. All other trademarks are the property of their respective owners. Other company and brand products and service names are trademarks or registered trademarks of their respective holders. Important Notices 1 2 6 7 No No Function Function 3 4 5 10 11 13 12 14 15 DC in power supply port VESA:100*100mm Camera NFC card reader Light sensor Speaker Volume + 8 9 16 Volume - Power RJ45-with POE Mic 3.5mm earphone with Mic Home Shield for camera LCD IPS panel 13.3"resolution1920*1080 Quad core cortex A17,1.8G RAM 2GB Internal memory 16GB Android 5.1/8.1 10-Point capacitive touch 2.0M/P,front camera Face recognition front camera (optional) Support NFC card reader (optional) Bluetooth 4.0 WiFi 802.11b/g/n RJ45 ethernet with POE Serial port Microphone Micro USB OTG 2*2W Speaker VESA:100*100mm Adapter:12V/2A 337.32mm 228.26mm 166.8mm 26.6mm 295.3mm 2 1 4 3 5 10 11 12 13 14 16 15 100mm 100mm 6 8 7 9 3.3V/GND GND/TX/RX Model：WH1332T FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Declaration on Model Differences We, SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Building 2, Yingfeng Industrial Zone, Tantou Community, Songgang Street, Bao'an, Shenzhen, China Declare that the following product(s): Product Name:Android Tablet Model No.:WH1332T, WH1012T, WH1342T, WH1013T, WH1512T, WH1513T, WB1901A, WB1902A, WB2101A, WB2102A, WB2401A, WB2402A, WB2801A, WB2802A, WB3701A, WB3702A, WB4801A, WB4802A, WM19, WM18 FCC ID:2ABC5-E0004 Utilize the identical circuit design, PCB layout, shielding and interface with(WH1332T),only the model name different. Therefore this application can be regarded as identical in performance to the submitted test sample. The manufacturer would take all the responsibilities for the above product(s). For and on behalf of Shenzhen, China Authorized personLocation Name:Yonghong Li Position:Manager Date of issue:2020-05-28 *I hereby declare that I am entitled to sign on behalf of the applicant and that the information supplied is correct and complete.

SHENZHENELECTRONTECHNOLOGYCO.,LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020/05/28 Subject; Request for Confidentiality FCC ID: 2ABC5-E0004 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description FCC SW SECURITY DESCRIPTION In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Yonghong Li Title: Manager

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Letter of Authorization Company: SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Address: Building 2, Yingfeng Industrial Zone, Tantou Community, Songgang Street, Bao'an, Shenzhen, China Product Name: Android Tablet Model Number(s): WH1332T, WH1012T, WH1342T, WH1013T, WH1512T, WH1513T, WB1901A, WB1902A, WB2101A, WB2102A, WB2401A, WB2402A, WB2801A, WB2802A, WB3701A, WB3702A, WB4801A, WB4802A, WM19, WM18 Product Description: Android Tablet We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 28/05/2020 Name:Yonghong Li Title:Manager Company: SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.

FCC ID: 2ABC5-E0004

Label Location:

Product Name: Android Tablet Model No.: WH1332T FCC ID: 2ABC5-E0004 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2ABC5-E0004 ANT

RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b) FCC ID: 2ABC5-E0004 EUT Specification EUTAndroid Tablet Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.24GHz WLAN: 5.745GHz ~ 5.825GHz Others: 2.402GHz~2.480GHz (BLE) Device category Portable (<20cm separation) Mobile (>20cm separation) Others ___ Exposure classificationOccupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure (S=1mW/cm2) Antenna diversitySingle antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output powerWiFi 2.4GHz : 14.02dBm (0.0252W) WiFi 5.1G: 10.70dBm (0.0117W) WiFi 5.8G: 12.06dBm (0.0161W) BLE: 4.137dBm (0.0026W) Antenna gain (Max)WiFi 2.4G&BLE: 1.5 dBi WiFi 5.1G&WiFi 5.8G: 1.23dBi Evaluation applied MPE Evaluation SAR Evaluation Limits for Maximum Permissible Exposure(MPE) Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density(mW/cm 2 ) Average Time (A) Limits for Occupational/Control Exposures 300-1500----F/3006 1500-100000----56 (B) Limits for General Population/Uncontrol Exposures 300-1500----F/15006 1500-100000----130 Friis transmission formula: Pd=(Pout*G)\(4*pi*R2) Where Pd= Power density in mW/cm 2 Pout=output power to antenna in Mw G= gain of antenna in linear scale Pi=3.1416 R= distance between observation point and center of the radiator in cm Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Measurement Result 2.4GHz WiFi & BT: Operating Mode Channel Frequency Measured Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm 2 ) (MHz)(dBm)(dBm)(dBm)(dBi)(mW/ cm 2 ) 802.11b 241213.48 13.48±114.481.50.00791 243713.43 13.43±114.431.50.00781 246212.97 12.97±113.971.50.00701 802.11g 241214.02 14.02±115.021.50.00891 243713.65 13.65±114.651.50.00821 246213.55 13.55±114.551.50.00801 802.11n (HT20) 241213.61 13.61±114.611.5 0.0081 1 243713.34 13.34±114.341.50.00761 246213.24 13.24±114.241.50.00751 802.11n (HT40) 242213.61 13.61±114.611.50.00811 243713.19 13.19±114.191.50.00741 245213.22 13.22±114.221.50.00741 BLE 24024.137 4.137±15.1371.50.00091 24403.932 3.932±14.9321.50.00091 24803.473 3.473±14.4731.50.00081 5.1GHz &5.8GHz WiFi: Note: 2.4G WiFi+BLE+5.1G WiFi +5.8G WiFi simultaneous ( worst case ): 0.0089+0.0009+0.0039+0.0053=0.0271 < 1 Operating Mode Channel Frequency Measured Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm2 ) (MHz)(dBm)(dBm)(dBm)(dBi)(mW/ cm2 ) 802.11a 518010.7010.70±111.701.230.00391 520010.1210.12 ± 111.121.230.00341 52409.609.60 ± 110.601.230.00301 802.11n20 518010.4810.48±111.481.230.00371 520010.0210.02 ± 111.021.230.00331 52409.119.11 ± 110.111.230.00271 802.11ac20 518010.3210.32±111.321.230.00361 52009.849.84 ± 110.841.230.00321 52409.179.17 ± 110.171.230.00271 802.11n40 51909.219.21±110.211.230.00281 52308.648.64 ± 19.64 1.23 0.0024 1 802.11ac40 51909.539.53 ± 110.531.230.00301 52308.498.49±19.49 1.23 0.0023 1 802.11ac80 52109.449.44 ± 110.441.230.00291 802.11a 574512.0612.06 ± 113.061.230.00531 578511.4611.46±112.461.230.00471 582510.9310.93 ± 111.931.230.00411 802.11n20 574511.0911.09 ± 112.091.230.00431 578510.4010.40±111.401.230.00361 58259.839.83 ± 110.831.230.00321 802.11ac20 574511.5411.54 ± 112.541.230.00471 578510.6110.61±111.611.230.00381 58259.839.83 ± 110.831.230.00321 802.11n40 575510.5210.52 ± 111.521.230.00371 57959.439.43±110.431.230.00291 802.11ac40 575510.2410.24 ± 111.241.230.00351 57959.139.13 ± 110.131.230.00271 802.11ac80 577510.4210.42±111.421.230.00371

Report No.: 18220WC00043801FCC ID: 2ABC5-E0004Page 1 of 74 Code:AB-RF-05-a FCC TEST REPORT Client Name: SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Address: Building 2, Yingfeng Industrial Zone, Tantou Community, Songgang Street, Bao'an, Shenzhen, China Product Name: Android Tablet Date: May 28 2020 Shenzhen Anbotek Compliance Laboratory Limited Report No.: 18220WC00043801FCC ID: 2ABC5-E0004Page 2 of 74 Code:AB-RF-05-a Contents 1. General Information ............................................................................................................................................... 5 1.1. Client Information ....................................................................................................................................... 5 1.2. Description of Device (EUT) ..................................................................................................................... 5 1.3. Auxiliary Equipment Used During Test ................................................................................................... 6 1.4. Description of Test Modes ........................................................................................................................ 6 1.5. List of channels ........................................................................................................................................... 8 1.6. Description Of Test Setup ......................................................................................................................... 9 1.7. Test Equipment List .................................................................................................................................. 10 1.8. Measurement Uncertainty ....................................................................................................................... 11 1.9. Description of Test Facility ...................................................................................................................... 11 2. Summary of Test Results ................................................................................................................................... 12 3. Conducted Emission Test ................................................................................................................................... 13 3.1. Test Standard and Limit .......................................................................................................................... 13 3.2. Test Setup .................................................................................................................................................. 13 3.3. Test Procedure .......................................................................................................................................... 13 3.4. Test Data .................................................................................................................................................... 13 4. Radiation Spurious Emission and Band Edge ................................................................................................ 18 4.1. Test Standard and Limit .......................................................................................................................... 18 4.2. Test Setup .................................................................................................................................................. 18 4.3. Test Procedure .......................................................................................................................................... 19 4.4. Test Data .................................................................................................................................................... 20 5. Maximum Peak Output Power Test .................................................................................................................. 30 5.1. Test Standard and Limit .......................................................................................................................... 30 5.2. Test Setup .................................................................................................................................................. 30 5.3. Test Procedure .......................................................................................................................................... 30 5.4. Test Data .................................................................................................................................................... 30 6. 6DB Occupy Bandwidth Test ............................................................................................................................. 34 6.1. Test Standard and Limit .......................................................................................................................... 34 6.2. Test Setup ............................................................................................................................... ................... 34 6.3. Test Procedure .......................................................................................................................................... 34 6.4. Test Data .................................................................................................................................................... 34 7. Power Spectral Density Test .............................................................................................................................. 42 7.1. Test Standard and Limit .......................................................................................................................... 42 7.2. Test Setup .................................................................................................................................................. 42 7.3. Test Procedure ............................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: 18220WC00043802FCC ID: 2ABC5-E0004Page 1 of 41 Code:AB-RF-05-a FCC TEST REPORT Client Name: SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Address: Building 2, Yingfeng Industrial Zone, Tantou Community, Songgang Street, Bao'an, Shenzhen, China Product Name: Android Tablet Date: May 28 2020 Shenzhen Anbotek Compliance Laboratory Limited Report No.: 18220WC00043802FCC ID: 2ABC5-E0004Page 2 of 41 Code:AB-RF-05-a Contents 1. General Information ............................................................................................................................................... 5 1.1. Client Information ....................................................................................................................................... 5 1.2. Description of Device (EUT) ..................................................................................................................... 5 1.3. Auxiliary Equipment Used During Test ................................................................................................... 7 1.4. Description of Test Modes ........................................................................................................................ 7 1.5. List of channels ........................................................................................................................................... 7 1.6. Description Of Test Setup ......................................................................................................................... 8 1.7. Test Equipment List .................................................................................................................................... 9 1.8. Measurement Uncertainty ....................................................................................................................... 10 1.9. Description of Test Facility ...................................................................................................................... 10 2. Summary of Test Results ................................................................................................................................... 11 3. Conducted Emission Test ................................................................................................................................... 12 3.1. Test Standard and Limit .......................................................................................................................... 12 3.2. Test Setup .................................................................................................................................................. 12 3.3. Test Procedure .......................................................................................................................................... 12 3.4. Test Data .................................................................................................................................................... 12 4. Radiation Spurious Emission and Band Edge ................................................................................................ 17 4.1. Test Standard and Limit .......................................................................................................................... 17 4.2. Test Setup .................................................................................................................................................. 17 4.3. Test Procedure .......................................................................................................................................... 18 4.4. Test Data .................................................................................................................................................... 19 5. Maximum Peak Output Power Test .................................................................................................................. 27 5.1. Test Standard and Limit .......................................................................................................................... 27 5.2. Test Setup .................................................................................................................................................. 27 5.3. Test Procedure .......................................................................................................................................... 27 5.4. Test Data .................................................................................................................................................... 27 6. 6DB Occupy Bandwidth Test ............................................................................................................................. 30 6.1. Test Standard and Limit .......................................................................................................................... 30 6.2. Test Setup ............................................................................................................................... ................... 30 6.3. Test Procedure .......................................................................................................................................... 30 6.4. Test Data .................................................................................................................................................... 30 7. Power Spectral Density Test .............................................................................................................................. 33 7.1. Test Standard and Limit .......................................................................................................................... 33 7.2. Test Setup .................................................................................................................................................. 33 7.3. Test Procedure ...........................................................................................................................…

Text truncated - open the document above for the full version.

PHOTOSOFTESTSETUP FCC ID: 2ABC5-E0004 Photo of PowerLine Conducted Emission Test Photo of Radiation Emission Test