2ABC5-E0072Android Tablet

SIZE:130x185MM 材质：80G书写纸黑白印刷， 双面印刷 折页 Digital Signage Package Contents Please make sure all of the following are present when you unpack your Digital Signage 15.6” 21.5“ 23.8“ 32“ DIGITAL SIGNAGE User Manual 1)Do not push objects into holes and ventilation slots. Do not expose this product to moisture or place any objects fil ed with liquids on or near the product. Do not place a naked flame sou ce, such as lighted candles, on or near this product. Do not store or operate the device in environments where the temperature is above 50 degrees celsius or below -10 degrees celsius. Do not intentionally hit the device or place heavy or sharp objects on the device. Only use accessories specified by the manu acturer. Keep the device away from benzene, diluents, and other chemicals. Do not attempt to repair this product yourself. Always use a qualified se vice agent to perform adjustments or repairs. Copyright Information All intellectual property rights in this publication are owned by and protected by applicable copyright laws and international treaty provisions. retains all rights not expressly granted. No part of this publication may be reproduced in any form whatsoever or used to make any derivative work without prior written approval by . Reserves the right to revise this publication, and/or make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time without prior notice. The information in this document is provided in good faith, but without any representation or warranty whatsoever, whether it is accurate,or complete or otherwise, and on express understanding that shall have no liability whatsoever to other parties in any way arising from or relating to the information or its use. All other trademarks are the property of their respective owners. Other company and brand products and service names are trademarks or registered trademarks of their respective holders. This device complies with CE and FCC regulations. Important Notices User manual Power adapter System Display Interface Other CPU RAM RK3588S2 Quad core cortex A55+Quad core cortex A76 RK3576 Quad core cortex A53+Quad core cortex A72 4GB 32GB Android 15.6“ 21.5" 23.8” 32"LCD Internal memory Operation system Panel Size Resolution Model Type 1920*1080 / 3840*2160(4K) Aspect Ratio Wi-Fi 169 IEEE 802.11b/g/n/a/ac/ax (wifi 6) BT 5.3 Full Function ( Except for charging function ) USB Host*2USB Support 800*600,1024*768,1280*720,1280*800, 1280*1024,1366*768,1600*900,1920*1080,3840*2160,etc Type-c HDMI IN 75x75mm15.6“ 21.5"/ 100x100mm23.8” 32" Power/Vol+/Vol- Support 4Ω*5W*2 Built in dual Microphone , Support noise reduction and echo cancellation -20---60 0---40 20~80%RH VESA Button G-sensor Speaker Microphone Storage Temperature Working Temperature Capacitive touch screen Number of points Interface for touch 10-Point HID-USB Specifications vary by model configuration. Product Specifications This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed of at the end of its life separately from your household waste. There are separate collection systems for recycling in your country. For more information, please contact the local authority or your retailer where you purchased the product. 15.6" Exterior Components 1 2 NoNo FunctionFunction 3 4 5 6 8 9 10 11 12 USB host USB host DC in power supply port VESA 75x75mm Volume + Power key Volume - Type-c HDMI IN 7 Ethernet Port Microprobe hole Camera FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions 1. This device may not cause harmful interference 2. This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are de signed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. RF warning statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body . This device complies with parts of the FCC rules. Operation is subject to the following two conditions: This device will not cause harmful interference; This device must accept any interference received, including interference that may cause undesired operation This product complies with the essential requirements of European safety regulations and has passed the product safety conformity assessment procedure. It also has a manufacturer's declaration of conformity to ensure that every product delivered to the customer is safe. 34mm 16.7mm 23.8“ 100mm 100mm 17.3mm 29mm 526.6mm 296.0mm 336.7mm 554.1mm 1 2 3 5 7 9 11 4 6 8 10 12 1 2 NoNo FunctionFunction 3 4 5 6 8 9 10 11 12 USB host USB host DC in power supply port VESA 100x100mm Volume + Power …

Text truncated - open the document above for the full version.

(SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024-09-03 FCC ID: (2ABC5-E0072) Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing (“SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing (“SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates)as an entity producing “covered” equipment. Applicant: SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Address: Bld.2,Yingfeng Industrial Zone,Tantou Community, Songgang Street, Baoan, Shenzhen, China Contact Person: Lianqi Wang Tel.: Manager Email: [email protected] Sincerely, Signature:

(SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024-09-03 FCC ID: (2ABC5-E0072) Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing (“SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing (“SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates)as an entity producing “covered” equipment. Applicant: SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Address: Bld.2,Yingfeng Industrial Zone,Tantou Community, Songgang Street, Baoan, Shenzhen, China Contact Person: Lianqi Wang Tel.: Manager Email: [email protected] Sincerely, Signature:

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Date:2024-09-03 Product Model Number: WF1585T, FA1585T FCC ID: 2ABC5-E0072 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: 0755-29161269 On behalf of: SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 3, 2024 Subject; Request for Confidentiality FCC ID: 2ABC5-E0072 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Lianqi Wang Title: Manager

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Declaration on Model Differences We, SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Bld.2,Yingfeng Industrial Zone,Tantou Community, Songgang Street, Baoan, Shenzhen, China Declare that the following product(s): Product Name: Android Tablet Model No.: WF1585T, FA1585T FCC ID: 2ABC5-E0072 Utilize the identical circuit design, PCB layout, shielding and interface with (WF1585T), only differ in appearance materials, colors and model name. Therefore this application can be regarded as identical in performance to the submitted test sample. The manufacturer would take all the responsibilities for the above product(s). For and on behalf of Shenzhen, China Authorized person Location Name: Lianqi Wang Position: Manager Date of issue: 2024-09-03 *I hereby declare that I am entitled to sign on behalf of the applicant and that the information supplied is correct and complete.

AntennaSpecification Productspecificationmodel:WIFI:SLK-YLD-3222B2-R-305I-G AntennaType:FPCAntenna Date:2024.06.15 Manufature:ShenzhenYishengbangTechnologyCo.,Ltd. Adress:Room101,BuildingC,QianwanHardTechnology IndustrialPark,BaoanDistrict,Shenzhen,China Telephone：18025305599Telephone：18666299104 深圳市亿圣邦科技有限公司第1页 深圳市亿圣邦科技有限公司第 2 页 WIFIAntenna(3222B2) 1.ExplanationofProductnumber: SLK-YLD-3222B2-R-305I-G 12345 ProductCode: (1)Customer: YLD:亿莱顿 (2)Project: 3222B2:SLK-YLD-3222B2(WIFIantenna) (3)WeldingPosition R:Right (4)CableLength: 305I:305*1.13MM一代端子 (5)CableColor G:Gray 2.Features *Stableandreliableinperformances *Compactsize *RoHScompliance 3.Applications *IEEE802.11(a/b/g/n) *Hand-helddeviceswhenWIFI(802.11a/b/g/n)functionsareneeded 4.Description Holybond’sFPCantennaseriesarespeciallydesignedforWIFI(802.11 a/b/g/n)applications.BasedonHolybond’sproprietarydesignandprocesses, thisFPCantennahasexcellentstabilityandsensitivitytoconsistentlyprovide highsignalreceptionefficiency. 深圳市亿圣邦科技有限公司第 3 页 5.ElectricalSpecifications 5-1 CharacteristicsSpecificationsUnit OutlineDimensions 31.95x22.5x0.12 mm CenterFrequency 2.4-2.5/5.15-5.85GHz Bandwidth(under-10dBreturnloss) 130minMHz VSWR 3max Impedance 50 Ω Polarization LinearPolarization 5-2． VSWRS11 深圳市亿圣邦科技有限公司第 4 页 5-3.WIFIAUXAntennaGain/Efficiency/3DDATA 深圳市亿圣邦科技有限公司第 5 页 5-4.WIFIactivetest 深圳市亿圣邦科技有限公司第 6 页 6.AntennaDimensions(unit:mm) 深圳市亿圣邦科技有限公司第 7 页 7.AntennaPicture WIFI分集天线

AntennaSpecification Productspecificationmodel:WIFI:SLK-YLD-3222A2-R-220I-B AntennaType:FPCAntenna Date:2024.06.15 Manufature:ShenzhenYishengbangTechnologyCo.,Ltd. Adress:Room101,BuildingC,QianwanHardTechnology IndustrialPark,BaoanDistrict,Shenzhen,China Telephone：18025305599Telephone：18666299104 深圳市亿圣邦科技有限公司第1页 深圳市亿圣邦科技有限公司第 2 页 WIFIAntenna(3222A2) 1.ExplanationofProductnumber: SLK-YLD-3222A2-R-220I-B 12345 ProductCode: (1)Customer: YLD:亿莱顿 (2)Project: 3222A2:SLK-YLD-3222A2(WIFIantenna) (3)WeldingPosition R:Right (4)CableLength: 220I:220*1.13MM一代端子 (5)CableColor B:Black 2.Features *Stableandreliableinperformances *Compactsize *RoHScompliance 3.Applications *IEEE802.11(a/b/g/n) *Hand-helddeviceswhenWIFI(802.11a/b/g/n)functionsareneeded 4.Description Holybond’sFPCantennaseriesarespeciallydesignedforWIFI(802.11 a/b/g/n)applications.BasedonHolybond’sproprietarydesignandprocesses, thisFPCantennahasexcellentstabilityandsensitivitytoconsistentlyprovide highsignalreceptionefficiency. 深圳市亿圣邦科技有限公司第 3 页 5.ElectricalSpecifications 5-1 CharacteristicsSpecificationsUnit OutlineDimensions 31.95x22.5x0.12 mm CenterFrequency 2.4-2.5/5.15-5.85GHz Bandwidth(under-10dBreturnloss) 130minMHz VSWR 3max Impedance 50 Ω Polarization LinearPolarization 5-2． VSWRS11 深圳市亿圣邦科技有限公司第 4 页 5-3.WIFIMAINAntennaGain/Efficiency/3DDATA 深圳市亿圣邦科技有限公司第 5 页 5-4.WIFIactivetest 深圳市亿圣邦科技有限公司第 6 页 6. AntennaDimensions(unit: mm) 深圳市亿圣邦科技有限公司第 7 页 7. AntennaPicture Main Antenna

Page 1 of 7 Report No.: 8232EU010503W-AB ANNEX B EXTERNAL PHOTOS PHOTO 1 PHOTO 2 Page 2 of 7 Report No.: 8232EU010503W-AB PHOTO 3 PHOTO 4 Page 3 of 7 Report No.: 8232EU010503W-AB PHOTO 5 PHOTO 6 Page 4 of 7 Report No.: 8232EU010503W-AB PHOTO 7 PHOTO 8 Page 5 of 7 Report No.: 8232EU010503W-AB PHOTO 9 PHOTO 10 Page 6 of 7 Report No.: 8232EU010503W-AB PHOTO 11 PHOTO 12 Page 7 of 7 Report No.: 8232EU010503W-AB PHOTO 13 --- End ---

Label Location On EUT Label Size: 40mm*60mm

Page 1 of 9 Report No.: 8232EU010503W-AC ANNEX C INTERNAL PHOTOS PHOTO 1 PHOTO 2 ANT2- AUX FPC(BT&2.4G WiFi&5G WiFi) ANT1-MAIN FPC(2.4G WiFi&5G WiFi) Page 2 of 9 Report No.: 8232EU010503W-AC PHOTO 3 PHOTO 4 Page 3 of 9 Report No.: 8232EU010503W-AC PHOTO 5 PHOTO 6 Page 4 of 9 Report No.: 8232EU010503W-AC PHOTO 7 PHOTO 8 Page 5 of 9 Report No.: 8232EU010503W-AC PHOTO 9 PHOTO 10 Page 6 of 9 Report No.: 8232EU010503W-AC PHOTO 11 PHOTO 12 Page 7 of 9 Report No.: 8232EU010503W-AC PHOTO 13 PHOTO 14 Page 8 of 9 Report No.: 8232EU010503W-AC PHOTO 15 PHOTO 16 Page 9 of 9 Report No.: 8232EU010503W-AC PHOTO 17 --- End ---

RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b) FCC ID: 2ABC5-E0072 EUT Specification EUT Android Tablet Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.24GHz WLAN: 5.745GHz ~ 5.825GHz Others: 2.402GHz~2.480GHz BLE Device category Portable (<20cm separation) Mobile (>20cm separation) Others ___ Exposure classification Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure (S=1mW/cm2) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power BLE: 6.35dBm (0.0043W) BDR&EDR: -0.68dBm (0.0009W) 2.4G WiFi: 18.02dBm (0.0634W) 5.1G WiFi: 13.21dBm (0.0209W) 5.8G WiFi: 16.25dBm (0.0422W) Antenna gain (Max) BT: 1.75 dBi 2.4G WiFi: ANT1: 1.46 dBi; ANT2: 1.75 dBi 5.1G WiFi: ANT1: 2.94 dBi; ANT2: 2.77 dBi 5.8G WiFi: ANT1: 2.86 dBi; ANT2: 2.95 dBi Evaluation applied MPE Evaluation SAR Evaluation Limits for Maximum Permissible Exposure(MPE) Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density(mW/cm 2 ) Average Time (A) Limits for Occupational/Control Exposures 300-1500 -- -- F/300 6 1500-100000 -- -- 5 6 (B) Limits for General Population/Uncontrol Exposures 300-1500 -- -- F/1500 6 1500-100000 -- -- 1 30 Friis transmission formula: Pd=(Pout*G)\(4*pi*R2) Where Pd= Power density in mW/cm 2 Pout=output power to antenna in Mw G= gain of antenna in linear scale Pi=3.1416 R= distance between observation point and center of the radiator in cm Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Measurement Result 2.4GHz WiFi ANT 1 worst case: Operating Mode Channel Frequency Measured Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm 2 ) (MHz) (dBm) (dBm) (dBm) (dBi) (mW/ cm 2 ) 802.11ax (HEW20) 2462 15.00 15.00±1 16.00 1.46 0.0111 1 ANT 2 worst case: Operating Mode Channel Frequency Measured Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm 2 ) (MHz) (dBm) (dBm) (dBm) (dBi) (mW/ cm 2 ) 802.11ax (HEW20) 2462 18.02 18.02±1 19.02 1.75 0.0238 1 MIMO worst case: Operating Mode Channel Frequency Measured Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm 2 ) (MHz) (dBm) (dBm) (dBm) (dBi) (mW/ cm 2 ) 802.11ax (HEW20) 2462 19.78 19.78±1 20.78 4.62 0.0690 1 5.1GHz WiFi ANT 1 worst case: ANT 2 worst case: MIMO worst case: 5.8GHz WiFi ANT 1 worst case: ANT 2 worst case: Operating Mode Channel Frequency Measured Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm2 ) (MHz) (dBm) (dBm) (dBm) (dBi) (mW/ cm2 ) 802.11ax (HEW80) 5210 12.70 12.70±1 13.70 2.94 0.0092 1 Operating Mode Channel Frequency Measured Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm2 ) (MHz) (dBm) (dBm) (dBm) (dBi) (mW/ cm2 ) 802.11ax (HEW80) 5210 13.21 13.21±1 14.21 2.77 0.0099 1 Operating Mode Channel Frequency Measured Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm2 ) (MHz) (dBm) (dBm) (dBm) (dBi) (mW/ cm2 ) 802.11ax (HEW80) 5210 15.97 15.97±1 16.97 5.87 0.0383 1 Operating Mode Channel Frequency Measured Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm2 ) (MHz) (dBm) (dBm) (dBm) (dBi) (mW/ cm2 ) 802.11ax (HEW80) 5775 16.25 16.25±1 17.25 2.86 0.0204 1 Operating Mode Channel Frequency Measured Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm2 ) (MHz) (dBm) (dBm) (dBm) (dBi) (mW/ cm2 ) 802.11ax (HEW80) 5775 15.84 15.84±1 16.84 2.95 0.0190 1 MIMO worst case: BLE worst case: Operating Mode Channel Frequency Measured Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm 2 ) (MHz) (dBm) (dBm) (dBm) (dBi) (mW/ cm 2 ) BLE(2M) 2440 6.35 6.35±1 7.35 1.75 0.0016 1 BT worst case: Operating Mode Channel Frequency Measured Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm 2 ) (MHz) (dBm) (dBm) (dBm) (dBi) (mW/ cm 2 ) π /4-DQPSK 2441 -0.68 -0.68±1 0.32 1.75 0.0003 1 Note: 2.4G WiFi MIMO+5.1G WiFi MIMO+5.8G WiFi MIMO+ BLE+BDR&EDR simultaneous: (0.0690+0.0383+0.0788+0.0016+0.0003)/1=0.1880/1=0.1880< 1 Test Result: Pass Operating Mode Channel Frequency Measured Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm2 ) (MHz) (dBm) (dBm) (dBm) (dBi) (mW/ cm2 ) 802.11ax (HEW80) 5775 19.06 19.06±1 20.06 5.92 0.0788 1

TRF No.: FCC Part 15 Subpart C_BT (A01) TEST REPORT Report No.: 8232EU010503W1 Applicant: SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Address: Bld.2,Yingfeng Industrial Zone,Tantou Community, Songgang Street, Baoan, Shenzhen, China Product Name: Android Tablet Model No.: WF1585T (refer to clause 2.4) Trademark: N/A FCC ID: 2ABC5-E0072 Test Standard(s): 47 CFR Part 15 Subpart C Date of Receipt: Aug. 05, 2024 Test Date: Aug. 05, 2024 – Aug. 16, 2024 Date of Issue: Sep. 03, 2024 ISSUED BY: SHENZHEN EU TESTING LABORATORY LIMITED Prepared by: Reviewed and Approved by: ____________________ _____________________ Mikey Zhu/ Engineer Sally Zhang/ Manager Page 2 of 44 Report No.: 8232EU010503W1 TRF No.: FCC Part 15 Subpart C_BT (A01) Revision Record Report Version Issued Date Description Status V0 Sep. 03, 2024 Original Valid Page 3 of 44 Report No.: 8232EU010503W1 TRF No.: FCC Part 15 Subpart C_BT (A01) Table of Contents 1 COVER PAGE .................................................................................................................................... 1 2 GENERAL INFORMATION .......................................................................................................................5 2.1 APPLICANT INFORMATION ...................................................................................................................5 2.2 MANUFACTURER INFORMATION ...........................................................................................................5 2.3 FACTORY INFORMATION ......................................................................................................................5 2.4 GENERAL DESCRIPTION OF E.U.T. ......................................................................................................5 2.5 TECHNICAL INFORMATION OF E.U.T. ...................................................................................................6 3 TEST SUMMARY .......................................................................................................................................8 3.1 TEST STANDARD ................................................................................................................................8 3.2 TEST VERDICT ....................................................................................................................................8 3.3 TEST LABORATORY ............................................................................................................................8 4 TEST CONFIGURATION ...........................................................................................................................9 4.1 TEST ENVIRONMENT ...........................................................................................................................9 4.2 TEST EQUIPMENT ...............................................................................................................................9 4.3 DESCRIPTION OF SUPPORT UNIT ...................................................................................................... 10 4.4 TEST MODE..................................................................................................................................... 10 4.5 DESCRIPTION OF CALCULATION ....................................................................................................... 10 4.6 MEASUREMENT UNCERTAINTY ......................................................................................................... 11 4.7 DEVIATION FROM STANDARDS ......................................................................................................... 11 4.8 ABNORMALITIES FROM STANDARD CONDITION ................................................................................. 11 5 TEST ITEMS ........................................................................................................................................... 12 5.1 ANTENNA REQUIREMENT .................................................................................................................. 12 5.1.1 Test Requirement .............................................................................................................. 12 5.1.2 Antenna Anti-Replacement Construction .......................................................................... 12 5.1.3 Antenna Gain .................................................................................................................... 12 5.2 CONDUCTED EMISSION AT AC POWER LINE ..................................................................................... 13 5.2.1 Test Requirement .............................................................................................................. 13 5.2.2 Test Setup Diagram .......................................................................................................... 13 5.2.3 Test Procedure .................................................................................................................. 13 5.2.4 Test Data ........................................................................................................................... 13 5.3 20DB BANDWIDTH........................................................................................................................... 16 5.3.1 Test Requirement .............................................................................................................. 16 5.3.2 Test Setup Diagram .......................................................................................................... 16 5.3.3 Test Procedure .................................................................................................................. 17 5.3.4 Test Data ........................................................................................................................... 17 5.4 MAXIMUM CONDUCTED OUTPUT POWER .......................................................................................... 18 5.4.1 Test Requir…

Text truncated - open the document above for the full version.

Page 1 of 74 Report No.: 8232EU010503W-AD ANNEX D TEST DATA For Project No.: 8232EU010503W Client: SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Product Description: Android Tablet Model No.: WF1585T FCC ID: 2ABC5-E0072 Technology: Bluetooth BDR+EDR Test Engineer: Test Date: 2024-08-15 Page 2 of 74 Report No.: 8232EU010503W-AD Test Summary Item Result Duty Cycle Pass Bandwidth Pass Maximum Conducted Output Power Pass Carrier Frequency Separation Pass Number of Hopping Frequencies Pass Time of Occupancy (Dwell Time) Pass Unwanted Emissions In Non-restricted Frequency Bands Pass Page 3 of 74 Report No.: 8232EU010503W-AD 1. Duty Cycle 1.1 Test Result 1.1.1 Ant1 Ant1 Mode TX Type Frequency (MHz) Packet Type T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) GFSK SISO 2402 DH5 2.892 3.751 77.10 1.13 0.03 2441 DH5 2.891 3.750 77.09 1.13 0.03 2480 DH5 2.892 3.751 77.10 1.13 0.03 π/4-DQPSK SISO 2402 2DH5 2.893 3.751 77.13 1.13 0.03 2441 2DH5 2.893 3.751 77.13 1.13 0.03 2480 2DH5 2.893 3.751 77.13 1.13 0.03 8DPSK SISO 2402 3DH5 2.892 3.751 77.10 1.13 0.03 2441 3DH5 2.892 3.751 77.10 1.13 0.04 2480 3DH5 2.887 3.751 76.97 1.14 0.03 Page 4 of 74 Report No.: 8232EU010503W-AD 1.2 Test Graph 1.2.1 Ant1 GFSK_DH5_LCH_2402MHz_Ant1_NTNV GFSK_DH5_MCH_2441MHz_Ant1_NTNV Page 5 of 74 Report No.: 8232EU010503W-AD GFSK_DH5_HCH_2480MHz_Ant1_NTNV π/4-DQPSK_2DH5_LCH_2402MHz_Ant1_NTNV Page 6 of 74 Report No.: 8232EU010503W-AD π/4-DQPSK_2DH5_MCH_2441MHz_Ant1_NTNV π/4-DQPSK_2DH5_HCH_2480MHz_Ant1_NTNV Page 7 of 74 Report No.: 8232EU010503W-AD 8DPSK_3DH5_LCH_2402MHz_Ant1_NTNV 8DPSK_3DH5_MCH_2441MHz_Ant1_NTNV Page 8 of 74 Report No.: 8232EU010503W-AD 8DPSK_3DH5_HCH_2480MHz_Ant1_NTNV Page 9 of 74 Report No.: 8232EU010503W-AD 2. Bandwidth 2.1 Test Result 2.1.1 OBW Mode TX Type Frequency (MHz) Packet Type ANT 99% Occupied Bandwidth (MHz) Verdict Result Limit GFSK SISO 2402 DH5 1 0.888 / Pass 2441 DH5 1 0.886 / Pass 2480 DH5 1 0.885 / Pass π/4-DQPSK SISO 2402 2DH5 1 0.930 / Pass 2441 2DH5 1 0.928 / Pass 2480 2DH5 1 0.929 / Pass 8DPSK SISO 2402 3DH5 1 0.910 / Pass 2441 3DH5 1 0.913 / Pass 2480 3DH5 1 0.911 / Pass 2.1.2 20dB BW Mode TX Type Frequency (MHz) Packet Type ANT 20dB Bandwidth (MHz) Verdict Result Limit GFSK SISO 2402 DH5 1 0.976 / Pass 2441 DH5 1 0.974 / Pass 2480 DH5 1 0.982 / Pass π/4-DQPSK SISO 2402 2DH5 1 1.056 / Pass 2441 2DH5 1 1.062 / Pass 2480 2DH5 1 1.058 / Pass 8DPSK SISO 2402 3DH5 1 1.040 / Pass 2441 3DH5 1 1.036 / Pass 2480 3DH5 1 1.038 / Pass Page 10 of 74 Report No.: 8232EU010503W-AD 2.2 Test Graph 2.2.1 OBW GFSK_DH5_LCH_2402MHz_Ant1_NTNV GFSK_DH5_MCH_2441MHz_Ant1_NTNV Page 11 of 74 Report No.: 8232EU010503W-AD GFSK_DH5_HCH_2480MHz_Ant1_NTNV π/4-DQPSK_2DH5_LCH_2402MHz_Ant1_NTNV Page 12 of 74 Report No.: 8232EU010503W-AD π/4-DQPSK_2DH5_MCH_2441MHz_Ant1_NTNV π/4-DQPSK_2DH5_HCH_2480MHz_Ant1_NTNV Page 13 of 74 Report No.: 8232EU010503W-AD 8DPSK_3DH5_LCH_2402MHz_Ant1_NTNV 8DPSK_3DH5_MCH_2441MHz_Ant1_NTNV Page 14 of 74 Report No.: 8232EU010503W-AD 8DPSK_3DH5_HCH_2480MHz_Ant1_NTNV Page 15 of 74 Report No.: 8232EU010503W-AD 2.2.2 20dB BW GFSK_DH5_LCH_2402MHz_Ant1_NTNV GFSK_DH5_MCH_2441MHz_Ant1_NTNV Page 16 of 74 Report No.: 8232EU010503W-AD GFSK_DH5_HCH_2480MHz_Ant1_NTNV π/4-DQPSK_2DH5_LCH_2402MHz_Ant1_NTNV Page 17 of 74 Report No.: 8232EU…

Text truncated - open the document above for the full version.