2ABCB-RPI5Single board computer

Raspberry Pi Maurice Wilkes Building St. John’s Innovation Park Cambridge CB4 0DS United Kingdom +44 (0) 1223 322 633 raspberrypi.com Installation Guide for Raspberry Pi 5 - Module Integration Document Number: RP-005013-UM 1 Executive Summary The purpose of this document is to provide information on how to use a Raspberry Pi 4 Model B as a radio module when integrating into a host product. Warning: Incorrect integration or use may infringe compliance rules meaning recertification may be required. This document pertains to variants: Raspberry Pi 5 1GB Raspberry Pi 5 2GB Raspberry Pi 5 4GB Raspberry Pi 5 8GB FCC ID: 2ABCB-RPI4B IC: 20953-RPI4B Installation Guide for Raspberry Pi 5 - Module Integration RP-005013-UM Public Raspberry Pi Ltd registered in England and Wales. Company No. 8207441 Page 2 of 11 2 Contents 1 Executive Summary............................................................................................................................... 1 2 Module Description ............................................................................................................................... 3 3 Integration into Products ...................................................................................................................... 4 3.1 Module & Antenna Placement ..................................................................................................... 4 3.2 External Power Supply – USB Type C ......................................................................................... 4 3.3 External Power Supply – 40 Pin GPIO ......................................................................................... 5 3.4 Peripheral Connection ................................................................................................................. 6 3.5 Warning to Module Integrators ................................................................................................... 6 3.6 Antenna Information .................................................................................................................... 6 4 End Product Labelling ........................................................................................................................... 7 4.1 Federal Communications Commission (FCC) Labelling ........................................................... 7 4.2 Innovation, Science and Economic Development Canada (ISED) Labelling ............................ 9 5 Information for the Module Integrator as Original Equipment Manufacturer (OEM) ...................... 11 5.1 E-Labelling .................................................................................................................................. 11 5.2 Changes in Usage Conditions of this Module .......................................................................... 11 Installation Guide for Raspberry Pi 5 - Module Integration RP-005013-UM Public Raspberry Pi Ltd registered in England and Wales. Company No. 8207441 Page 3 of 11 3 Module Description The Raspberry Pi 5 Single Board Computer (SBC) Module has an IEEE 802.11b/g/n/ac 1x1 WLAN, Bluetooth 5 and Bluetooth LE module based on the Cypress 43455 chip. The module is designed to be mounted, with appropriate screws, into an host product. The module must be placed in a suitable location to ensure WLAN performance is not compromised. Installation Guide for Raspberry Pi 5 - Module Integration RP-005013-UM Public Raspberry Pi Ltd registered in England and Wales. Company No. 8207441 Page 4 of 11 4 Integration into Products 4.1 Module & Antenna Placement When locating the Raspberry Pi 5 within a product, a separation distance greater than 20cm must always be maintained between the antenna and any other radio transmitter if installed in the same product. The module is physically attached and held in place by screws. Figure 1 - Radio Circuitry 4.2 External Power Supply – USB Type C The Raspberry Pi 5 may be powered by a compatible Power Supply Unit (PSU). The supply should be 5V DC minimum 3A. Any external power supply used with the Raspberry Pi 5 must comply with relevant regulations and standards applicable in the country of intended use. Warning: it is the responsibility of the module integrator to select a suitable PSU. This is to be connected via the J1 connector: Figure 2 - USB-C Power Connector J1 Installation Guide for Raspberry Pi 5 - Module Integration RP-005013-UM Public Raspberry Pi Ltd registered in England and Wales. Company No. 8207441 Page 5 of 11 4.3 External Power Supply – 40 Pin GPIO The module integrator may choose to power the Raspberry Pi 5 via the 40 Pin General Purpose Input Output (GPIO) header (J8). Figure 3 - 40 Pin GPIO Header J8 Connection via this method is at the discretion of the module integrator. Power must be delivered by a suitable power supply. Any external power supply used with the Raspberry Pi 5 shall comply with relevant regulations and standards applicable in the country of intended use. Warning: it is the responsibility of the module integrator to select a suitable alternative power source and to ensure it is connected adequately. Pins 1 + 3 connected to 5V and pin 5 to GND. Figure 4 - 40 Pin GPIO Power Supply Example Installation Guide for Raspberry Pi 5 - Module Integration RP-005013-UM Public Raspberry Pi Ltd registered in England and Wales. Company No. 8207441 Page 6 of 11 4.4 Peripheral Connection Dependent on intended use, the following ports are available to the module integrator; Micro HDMI Ethernet USB2.0 and USB3.0 ports DSI Display (for use with Official Raspberry Pi display, sold separately) CSI Camera (for use with Official Raspberry Pi Camera module, sold separately) Figure 5 - Peripheral Connections 4.5 Warning to Module Integrators At no point should any part of the board be altered as this will invalidate any existing compliance work. Always consult professional compliance experts about integrating this module into a product to ensure that all certifications are …

Text truncated - open the document above for the full version.

Designed and distributed by Raspberry Pi Ltd Maurice Wilkes Building Cowley Road Cambridge CB4 0DS United Kingdom raspberrypi.com Safety and User Guide ENSAFETY INSTRUCTIONS IMPORTANT: PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE WARNINGS •Any external power supply used with the Raspberry Pi shall comply with relevant regulations and standards applicable in the country of intended use. The power supply should provide 5V DC and a minimum rated current of 3A. INSTRUCTIONS FOR SAFE USE •This product should not be overclocked. •Do not expose this product to water or moisture, and do not place it on a conductive surface whilst in operation. •Do not expose this product to heat from any source; it is designed for reliable operation at normal room temperatures. •Do not expose the board to high intensity light sources (e.g. xenon flash or laser). •Operate this product in a well-ventilated environment, and do not cover it during use. •Place this product on a stable, flat, non-conductive surface while in use, and do not let it contact conductive items. •Take care while handling this product to avoid mechanical or electrical damage to the printed circuit board and connectors. •Avoid handling this product while it is powered. Only handle by the edges to minimise the risk of electrostatic discharge damage. •Any peripheral or equipment used with the Raspberry Pi should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met. Such equipment includes, but is not limited to, keyboards, monitors, and mice. For all compliance certificates and numbers, please visit pip.raspberrypi.com ZH汉语 重要提示：请保留此信息以供将来参考 警告 • RaspberryPi使用的任何外置电源应符合所在国 家的相关法规和标准。电源应提供5VDC和3A最小 额定电流。 安全使用说明 • 此产品不可超频。 • 请勿将本产品暴露在水或潮湿环境中；当其运行时， 请勿将其置于导电表面上。 • 请勿将此产品暴露于任何热源；此产品仅适合在正常 室温中使用，以确保可靠运行。 • 请勿将电路板暴露于高强度光源（例如氙气闪光灯 或激光） • 在通风良好的环境中运行此产品,在使用过程中请 勿覆盖。 • 使用时，请将本产品放在稳定、平坦、绝缘的表面上， 请勿让它接触导电物品。 • 拿放本产品时请小心，以免对印刷电路板和连接器造 成机械或电气损坏。 • 本产品通电时避免接触、拿放。拿放时应只接触产品 的边缘，以最大限度地降低静电放电损坏的风险。 • RaspberryPi使用的任何外设或设备应符合使用国 家的相关标准，并进行相应标记，以确保满足安全和 性能要求。 如需查询所有合规证书及编号，请访问 pip.raspberrypi.com CS BEZPEČNOSTNÍPRŮVODCE DŮLEŽITÉ:TUTOINFORMACISIPONECHTEPRO POUŽITÍVBUDOUCNU VAROVÁNÍ •Každý externí napájecí zdroj použitý s Raspberry Pi musí splňovat příslušné předpisy a normy platné v zemi určení. Napájecí zdroj by měl poskytovat stejnosměrné napětí 5V a minimální jmenovitý proud 3A. POKYNYPROBEZPEČNÉPOUŽÍVÁNÍ •Tento výrobek by neměl být přetaktován. •Výrobek nevystavujte vodě ani vlhkosti a za provozu ho neumisťujte na vodivý povrch. •Výrobek nevystavujte teplu z jakéhokoli zdroje; je navržen pro spolehlivý provoz při normálních pokojových teplotách. •Nevystavujte desku světelným zdrojům s vysokou intenzitou (např. Xenonový blesk nebo laser). •Výrobek používejte v dobře větraném prostředí a za provozu ho nepřikrývejte. •Výrobek při používání ponechte na stabilním, plochém a nevodivém povrchu a zabraňte jeho dotyku s vodivými předměty. •Při manipulaci s výrobkem dbejte na to, abyste zabránili mechanickému nebo elektrickému poškození desky plošných spojů a konektorů. •Vyvarujte se manipulace s výrobkem, když je napájen. K manipulaci používejte pouze okraje,abyste minimalizovali riziko poškození elektrostatickým výbojem. •Veškerá periferní a další zařízení používaná s Raspberry Pi by měla být v souladu s příslušnými normami země použití a měla by být odpovídajícím způsobem označena, aby se zajistilo, že splňují požadavky na bezpečnost a výkon. Všechna osvědčení o shodě a čísla najdete na pip.raspberrypi.com DASIKKERHEDSINSTRUKTIONER VIGTIGT:OPBEVARDENNEINFORMATIONFOR FREMTIDIGREFERENCE ADVARSLER •Eksterne strømforsyninger, der anvendes til Raspberry Pi skal være i overensstemmelse med relevante bestemmelser og standarder, som er gældende i det land, hvor anvendelsen er tiltænkt. Strømforsyningen skal give 5 V jævnstrøm og en nominel strømstyrke på mindst 3 A. INSTRUKTIONER FOR SIKKER BRUG •Dette produkt må ikke overophedes. •Udsæt ikke dette produkt for vand eller fugt, og sæt det ikke på en ledende overflade under drift. •Udsæt ikke dette produkt for varme fra nogen kilder; det er designet til pålidelig drift ved normal stuetemperatur. •Udsæt ikke kortet for lyskilder med høj intensitet (f.eks. Xenon-flash eller laser). •Anvend dette produkt i et godt ventileret miljø, og tildæk det ikke under brug. •Anbring dette produkt på en stabil, flad og ikke-ledende overflade under brug, og lad det ikke komme i berøring med ledende genstande. •Vær forsigtig ved håndtering af dette produkt for at undgå mekanisk eller elektrisk beskadigelse af printkort og stik. •Undgå håndtering af dette produkt, mens det er tændt. Må kun håndteres ved at holde i kanterne for at minimere risikoen for skader ved elektrostatisk udladning. •Alt perifert udstyr eller udstyr, der anvendes til Raspberry Pi skal overholde relevante standarder i landet for anvendelse og mærkes i overensstemmelse hermed for at sikre, at kravene for sikkerhed og ydeevne er opfyldt. For alle overensstemmelsescertifikater og numre, gå på pip.raspberrypi.com NLVEILIGHEIDSINSTRUCTIES BELANGRIJK:BEWAARDEZEINFORMATIEVOOR TOEKOMSTIGEVERWIJZING WAARSCHUWINGEN •Elke externe voeding die met de Raspberry Pi wordt gebruikt, moet voldoen aan de relevante voorschriften en normen die van toepassing zijn in het land van het beoogde gebruik. De voeding moet 5V DC en een minimale nominale stroom van 3A leveren. INSTRUCTIESVOORVEILIGGEBRUIK •Dit product mag niet overklokt worden. •Stel dit product niet bloot aan water of vocht en plaats het tijdens gebruik niet op een geleidend oppervlak. •Stel dit product niet bloot aan warmte van welke bron dan ook; het is ontworpen voor betrouwbare werking bij normale kamertemperatuur. •Stel het bord niet bloot aan lichtbronnen met een hoge intensiteit (bijv. Xenonflits of laser). •Gebruik dit product in een goed geventileerde omgeving en dek het niet af tijdens gebruik. •Plaats dit product tijdens het gebruik op e…

Text truncated - open the document above for the full version.

Raspberry Pi Maurice Wilkes Building St. John’s Innovation Park Cambridge CB4 0DS United Kingdom +44 (0) 1223 322 633 raspberrypi.com Raspberry Pi Ltd Company number 8207441 registered in England and Wales Registered office: Maurice Wilkes Building, St. John’s Innovation Park, Cambridge, CB4 0DS Date: FCC ID: 2ABCB-RPI5 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA 1. Raspberry Pi LTD (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. Raspberry Pi LTD (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, DocuSign Envelope ID: C96DF9F0-BF2E-4628-A2DB-3A9E925FF66A James Adams Chief Operating Officer 18 September 2023 | 15:24 BST Raspberry Pi Ltd

Raspberry Pi Maurice Wilkes Building St. John’s Innovation Park Cambridge CB4 0DS United Kingdom +44 (0) 1223 322 633 raspberrypi.com Raspberry Pi Ltd Company number 8207441 registered in England and Wales Registered office: Maurice Wilkes Building, St. John’s Innovation Park, Cambridge, CB4 0DS CFR 47 §2.911 (d)(7) Agent Designation Attestation Date: FCC ID: 2ABCB-RPI5 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Raspberry Pi LTD (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information: Agent Company Name: Raspberry Pi (Trading) North America Inc. FRN: 0034162503 Agent Contact Name: Richard Boult Agent US Address: 2810 N Church Street Wilmington Delaware 19802 4447 Agent Email Address: [email protected] Sincerely yours, DocuSign Envelope ID: AEE39D73-2EF2-4DB0-864F-B362CCD10C70 James Adams Chief Operating Officer

Raspberry Pi Maurice Wilkes Building St. John’s Innovation Park Cambridge CB4 0DS United Kingdom +44 (0) 1223 322 633 raspberrypi.com Raspberry Pi Ltd Company number 8207441 registered in England and Wales Registered office: Maurice Wilkes Building, St. John’s Innovation Park, Cambridge, CB4 0DS CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation Date: FCC ID: 2ABCB-RPI5 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA FCC US Agent Agent Company Name: Raspberry Pi (Trading) North America Inc. FRN: 0034162503 Agent Contact Name: Richard Boult Agent US Address: 2810 N Church Street Wilmington Delaware 19802 4447 Agent Email Address: [email protected] This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of Raspberry Pi LTD (“the applicant”) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely yours, DocuSign Envelope ID: EBC303E4-BE2C-4AAF-8332-82E3C1492D3F Richard Boult CFO 27 September 2023 | 13:53 PDT

Raspberry Pi Maurice Wilkes Building St. John’s Innovation Park Cambridge CB4 0DS United Kingdom +44 (0) 1223 322 633 raspberrypi.com UL International (UK) Ltd ULID-006026 issue 2.0 - Interim Telecommunication Certification Body UL International (UK) Ltd Units 1-3, Horizon Wade Road Kingsland Business Park Basingstoke Hampshire RG24 8AH United Kingdom Subject: Authorisation Letter To whom it may concern This is to certify that Raspberry Pi LTD hereby authorises UL International (UK) Ltd. to act as the TCB for the application of the Raspberry Pi 5, FCC ID: 2ABCB-RPI5 to the FCC. We certify that we are not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. We also acknowledge that the FCC operates a certification scheme that makes some documentation (information) accessible to the public in accordance with FCC KDB publication 726920 D01. This is information that is generally known to the public. Yours faithfully, DocuSign Envelope ID: C96DF9F0-BF2E-4628-A2DB-3A9E925FF66A Chief Operating Officer Raspberry Pi Ltd James Adams 18 September 2023 | 15:24 BST

Raspberry Pi Maurice Wilkes Building St. John’s Innovation Park Cambridge CB4 0DS United Kingdom +44 (0) 1223 322 633 raspberrypi.com Raspberry Pi Ltd Company number 8207441 registered in England and Wales Registered office: Maurice Wilkes Building, St. John’s Innovation Park, Cambridge, CB4 0DS Telecommunication Certification Body UL International (UK) Ltd Units 1-3, Horizon Wade Road Kingsland Business Park Basingstoke Hampshire RG24 8AH United Kingdom Subject: Permanent Confidentiality Request Certification Application FCC ID: 2ABCB-RPI5 To whom it may concern Pursuant to Sections 0.457(d) and 0.459 of CFR 47, Raspberry Pi LTD, request that the following information, provided to support the FCC application for the Raspberry Pi 5 , FCC ID: 2ABCB-RPI5 be held permanently confidential:  Schematics  Block Diagrams  Operational Description  SW Security Information The above material contains trade secrets not customarily released to public that are judged to have the potential to cause detriment to the applicant and provide unjustified benefits to its competitors. This information should not be available for public disclosure for an indefinite period of time. Yours faithfully DocuSign Envelope ID: E68B2718-0E93-4157-9B42-D7455F13B73F 17 October 2023 | 11:30 BST Chief Operating Officer James Adams

Raspberry Pi Maurice Wilkes Building St. John’s Innovation Park Cambridge CB4 0DS United Kingdom +44 (0) 1223 322 633 raspberrypi.com Raspberry Pi Ltd Company number 8207441 registered in England and Wales Registered office: Maurice Wilkes Building, St. John’s Innovation Park, Cambridge, CB4 0DS Telecommunication Certification Body UL International (UK) Ltd Units 1-3, Horizon Wade Road Kingsland Business Park Basingstoke Hampshire RG24 8AH United Kingdom Subject: FCC Single-Modular Approval Letter FCC ID: 2ABCB-RPI5 To whom it may concern We, Raspberry Pi LTD, hereby declare that the product, FCC ID: 2ABCB-RPI5, has met the single- modular approval requirements of FCC rule part §15.212(a)(1) and this is shown in the table below. Requirement Compliance: Yes or No along with a justification The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly Yes, see operational description. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal Yes, all inputs are buffered from main processor to radio chip. Inputs to the board are buffered through USB or UART. The module must contain power supply regulation on the module Yes, the device has a 5V – 3V3 switch mode power supply that supplies the Radio circuitry. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) Yes, antenna is built into PCB see exhibits. The module must demonstrate compliance in a stand-alone configuration Yes, system is fully functional without any other equipment. The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements) Yes, FCC lD printed on PCB, see photo exhibit. DocuSign Envelope ID: C96DF9F0-BF2E-4628-A2DB-3A9E925FF66A 18 September 2023 | 15:24 BST Raspberry Pi Maurice Wilkes Building St. John’s Innovation Park Cambridge CB4 0DS United Kingdom +44 (0) 1223 322 633 raspberrypi.com Raspberry Pi Ltd Company number 8207441 registered in England and Wales Registered office: Maurice Wilkes Building, St. John’s Innovation Park, Cambridge, CB4 0DS The module must comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee Yes, see user guide The module must comply with RF exposure requirements Yes, see RF exposure exhibit. Yours faithfully, DocuSign Envelope ID: C96DF9F0-BF2E-4628-A2DB-3A9E925FF66A Chief Operating Officer James Adams Raspberry Pi Ltd

Raspberry Pi LTD Maurice Wilkes Building St. John’s Innovation Park Cambridge CB4 0DS United Kingdom +44 (0) 1223 322 633 raspberrypi.com Raspberry Pi 5 Photograph Exhibits ExternalTop and BottomPhotograph Images of the Raspberry Pi 5 for use in submission of application and assessment of product. Public | RP-004918-TC | 22/09/2023 | Pg. 1 of 2 Raspberry Pi 5 Front (Top) Raspberry Pi 5 Back (Bottom) Raspberry Pi LTD Maurice Wilkes Building St. John’s Innovation Park Cambridge CB4 0DS United Kingdom +44 (0) 1223 322 633 raspberrypi.com Raspberry Pi 5 Photograph Exhibits ExternalBack, Front, Left and RightPhotograph Images of the Raspberry Pi 5 for use in submission of application and assessment of product. Public | RP-004918-TC | 22/09/2023 | Pg. 2 of 2 z Top Bottom Right Left

Raspberry Pi LTD Maurice Wilkes Building St. John’s Innovation Park Cambridge CB4 0DS United Kingdom +44 (0) 1223 322 633 raspberrypi.com Raspberry Pi 5 Product LabellingTop and Bottom Labeling ExamplesImages are taken from the PCB design CAD files. Public | RP-004958-CF | 22/09/2023 | Pg. 1 of 1 Top Bottom

Raspberry Pi LTD Maurice Wilkes Building St. John’s Innovation Park Cambridge CB4 0DS United Kingdom +44 (0) 1223 322 633 raspberrypi.com Raspberry Pi 5 Photograph Exhibits InternalTop and BottomPhotograph Images of the Raspberry Pi 5 for use in submission of application and assessment of product. Public | RP-004919-TC | 22/09/2023 | Pg. 1 of 2 Raspberry Pi 5 Front (Top) Raspberry Pi 5 Back (Bottom) Raspberry Pi LTD Maurice Wilkes Building St. John’s Innovation Park Cambridge CB4 0DS United Kingdom +44 (0) 1223 322 633 raspberrypi.com Raspberry Pi 5 Photograph Exhibits InternalRadio Module with Shield RemovedPhotograph Images of the Raspberry Pi 5 for use in submission of application and assessment of product. Public | RP-004918-TC | 22/09/2023 | Pg. 2 of 2 Radio Module Shield Removed Radio Module With Shield Closeup Radio Module Shield Removed Closeup

Page 1 of 4 MPE Calculation - FCC ID: 2ABCB-RPI5 The FCC requires that the calculated MPE be equal to or less than a given limit dependent on frequency at a distance of 20 cm from a device to the body of a user. The transmitter operation for the Raspberry Pi 5 covers the 2.4GHz and 5GHz operating bands. Simultaneous transmission is not supported between any of the transmitters. The following FCC Rule Parts are applicable: Part 1.1310 – Radiofrequency radiation exposure limits Part 2.1091(c) – Radiofrequency radiation exposure evaluation: mobile devices CALCULATION The following far field power density equation is applicable: S = EIRP/(4 * π * R 2 ) Where S = Power density EIRP = Effective Isotropic Radiated Power (EIRP = P * G) P = Conducted Transmitter Power G = Antenna Gain (relative to an isotropic radiator) R = distance to the centre of radiation of the antenna (safe operating distance) Calculation for 2.4GHz BT (BDR/EDR worst case): Values: Transmitter frequency range = 2402 – 2480MHz P = 7.0dBm (including max. tune up tolerance) G = 3.5dBi EIRP = 10.5dBm = 11.22mW R = 20cm Power Density Requirement From table 1 (ii) - Limits for General Population/ Uncontrolled Exposure of FCC Rule Part 1.1310 for 2.4GHz S req1 = 1.0 mW/cm 2 DocuSign Envelope ID: EE378E9C-C456-44CC-A58A-B15BF40765D9 17 October 2023 | 14:33 BST Page 2 of 4 Calculation: S = EIRP/(4 * π * R 2 ) = 11.22/(4 * π * 20 2 ) S 1 = 0.0022 (Equivalent to 0.94cm safe operating distance) Calculation for 2.4GHz BT LE Values: Transmitter frequency range = 2402 – 2480MHz P = 4.77dBm (including max. tune up tolerance) G = 3.5dBi EIRP = 8.27dBm = 6.71mW R = 20cm Power Density Requirement From table 1 (b) - Limits for General Population/ Uncontrolled Exposure of FCC Rule Part 1.1310 for 2.4GHz S req2 = 1.0 mW/cm 2 Calculation: S = EIRP/(4 * π * R 2 ) = 6.71/(4 x π x 20 2 ) S 2 = 0.0013 (Equivalent to 0.73 cm safe operating distance) DocuSign Envelope ID: EE378E9C-C456-44CC-A58A-B15BF40765D9 Page 3 of 4 Calculation for 2.4GHz WLAN Values: Transmitter frequency range = 2412 – 2462MHz P = 13.41dBm (including max. tune up tolerance) G = 3.5dBi EIRP = 16.91dBm = 49.1mW R = 20cm Power Density Requirement From table 1 (b) - Limits for General Population/ Uncontrolled Exposure of FCC Rule Part 1.1310 for 2.4GHz S req3 = 1.0 mW/cm 2 Calculation: S = EIRP/(4 * π * R 2 ) = 49.1/(4 * π * 20 2 ) S 3 = 0.0098 (Equivalent to 1.98cm safe operating distance) Calculation for 5.0GHz WLAN Values: Transmitter frequency range = 5170 – 5825MHz P = 14.84dBm (including max. tune up tolerance) G = 2.5dBi EIRP = 17.34dBm = 54.2mW R = 20cm Power Density Requirement From table 1 (b) - Limits for General Population/ Uncontrolled Exposure of FCC Rule Part 1.1310 for 5GHz S req4 = 1.0 mW/cm 2 DocuSign Envelope ID: EE378E9C-C456-44CC-A58A-B15BF40765D9 Page 4 of 4 Calculation: S = EIRP/(4 * π * R 2 ) = 54.2/(4 * π * 20 2 ) S 4 = 0.011 (Equivalent to 2.08cm safe operating distance) Conclusion The required 20cm RF exposure limits for General Population/ Uncontrolled Exposure FCC Rule Part 1.1310 limits will not be exceeded for the Raspberry Pi 5 using antennas having a maximum gain of 3.5dBi (2.4GHz) and 2.5dBi (5GHz). DocuSign Envelope ID: EE378E9C-C456-44CC-A58A-B15BF40765D9 James Adams Chief Operating Officer 17 October 2023 | 14:33 BST

UL International (UK) LTD Unit 1-3 Horizon, Kingsland Business Park, Wade Road, Basingstoke, Hampshire, RG24 8AH, UK Telephone: +44 (0)1256 312000 TEST REPORT Test Report No. : UL-RPT-RP14705831-1016A Customer : Raspberry Pi LTD Model No. / HVIN : V2.0 PMN : Raspberry Pi 5 FCC ID : 2ABCB-RPI5 ISED Certification No. : IC: 20953-RPI5 Technology : Bluetooth – Low Energy Test Standard(s) : FCC Parts 15.209(a) & 15.247 Innovation, Science and Economic Development Canada RSS-247 Issue 2 February 2017 RSS-Gen Issue 5 February 2021 Test Laboratory : UL International (UK) Ltd, Basingstoke, Hampshire, RG24 8AH, United Kingdom 1. This test report shall not be reproduced except in full, without the written approval of UL International (UK) Ltd. 2. The results in this report apply only to the sample(s) tested. 3. The sample tested is in compliance with the above standard(s). 4. The test results in this report are traceable to the national or international standards. 5. Version 3.0 supersedes all previous versions. Date of Issue: 17 October 2023 Checked by: Ben Mercer Lead Project Engineer, Radio Laboratory Company Signatory: Sarah Williams RF Operations Leader, Radio Laboratory The Bluetooth ® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by UL International (UK) Ltd is under licence. Other trademarks and trade names are those of their respective owners. TEST REPORT SERIAL NO: UL-RPT-RP14705831-1016A VERSION 3.0 ISSUE DATE: 17 OCTOBER 2023 Page 2 of 28 Customer Information Company Name: Raspberry Pi LTD Address: Maurice Wilkes Building, St. John’s Innovation Park, Cambridge, CB4 0DS, United Kingdom Report Revision History Version Number Issue Date Revision Details Revised By 1.0 13/09/2023 Initial Version Ben Mercer 2.0 13/10/2023 Admin update Ben Mercer 3.0 17/10/2023 FVIN removed Ben Mercer TEST REPORT SERIAL NO: UL-RPT-RP14705831-1016A VERSION 3.0 ISSUE DATE: 17 OCTOBER 2023 Page 3 of 28 Table of Contents Customer Information ...................................................................................................................... 2 Report Revision History ................................................................................................................... 2 Table of Contents .............................................................................................................................. 3 1 Attestation of Test Results ........................................................................................................... 4 1.1 Description of EUT 4 1.2 General Information 4 1.3 Summary of Test Results 5 1.4 Deviations from the Test Specification 5 2 Summary of Testing ...................................................................................................................... 6 2.1 Facilities and Accreditation 6 2.2 Methods and Procedures 6 2.3 Calibration and Uncertainty 7 2.4 Test and Measurement Equipment 8 3 Equipment Under Test (EUT) ...................................................................................................... 10 3.1 Identification of Equipment Under Test (EUT) 10 3.2 Modifications Incorporated in the EUT 10 3.3 Additional Information Related to Testing 11 3.4 Description of Available Antennas 11 3.5 Description of Test Setup 12 4 Antenna Port Test Results .......................................................................................................... 16 4.1 Transmitter 99% Occupied Bandwidth 16 4.2 Transmitter Minimum 6 dB Bandwidth 18 4.3 Transmitter Maximum Peak Output Power 20 5 Radiated Test Results ..........................................................…

Text truncated - open the document above for the full version.