2ABCFVSPHESDUALElectronic Dart System

FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected. • Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation IMPORTANT NOTE: FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The antennas used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this equipment near water. 6) Do not using near any heat sources such as radiators, heat resisters, stove, or other equipment that produce heat. European CE notice to users and product statements This product is CE marked according to the provisions of the R&TTE Directive(99/5/EC). Hereby, HONG International Corp. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information, please contact http://www.hong21.com HONG International Corp. 3F, JnK Digital Tower 222-3, Guro-3Dong, Guro-Gu, Seoul, Republic of Korea Tel: +82-2-6124-6731 / Fax: +82-2-6124-6759 URL: http://www.hong21.com CONTACT INFORMATION Manufacturer Address : 3F, JnK Digital Tower 222-3, Guro-3Dong, Guro-Gu, Seoul, Republic of Korea To locate in-country HONG International Corp. distributors of the Electronic Dart System please refer to the HONG International Corp. Website http://www.hong21.com These distributor(s) represent local contacts for this product. CORPORATE HEADQUARTERS: HONG International Corp. 3F, JnK Digital Tower 222-3, Guro-3Dong, Guro-Gu, Seoul, Republic of Korea Tel: +82-2-6124-6731 Fax: +82-2-6124-6759 Web: http://www.hong21.com This device complies with Industry Canada license-exempt RSS standard(s). Operation is Subject to the following two condition: (1) this device may not cause interference ,and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

HONG International Corp. 3F, JnK Digital Tower 222-3, Guro-3Dong, Guro-Gu, Seoul, Republic of Korea Tel: +82-2-6124-6731 , Fax: +82-2-6124-6759 http://www.hong21.com LETTER OF AUTHORIZATION To whom it may concern: We, the undersigned, hereby authorize Korea Standard Quality Laboratories, to act on our behalf in all manners relating to application for equipment authorization for FCC ID: 2ABCF-VSPHESDUAL. including signing of all documents relating to these matters. Any and all acts carried out by Korea Standard Quality Laboratories, on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from HONG International Corp. Korea Standard Quality Laboratories (Contact Person) Contact name: Hak Hyeon, Yun Position: Manager Phone:+82-31-356-7333 E-mail: [email protected] Date : June 23, 2015 Sincerely, Byung Chang, Oh / Team Manager Company name: HONG International Corp. Phone: +82-2-6124-6731 Fax: +82-2-6124-6759 E-mail: [email protected]

HONG International Corp. 3F, JnK Digital Tower 222-3, Guro-3Dong, Guro-Gu, Seoul, Republic of Korea June 23, 2015 Subject: DoC declaration To Whom it may concern, We, as the grantee of this project FCC ID: 2ABCF-VSPHESDUAL, would like to declare that the composite portion categorized as computer peripheral has been authorized under the Declaration of Conformity procedures. Test Laboratory : Korea Standard Quality Laboratories #102, Jangduk Dong, Hwasung City, Kyunggi Do, South Korea Regards, Signature: Name/Title: Byung Chang, Oh / Team Manager Company Name: HONG International Corp. Brand Name : N/A Address: 3F, JnK Digital Tower 222-3, Guro-3Dong, Guro-Gu, Seoul, Republic of Korea TEL : +82-2-6124-6731 FAX : +82-2-6124-6759 Email : [email protected]

FCC, Request for non-disclosure Date: June 23, 2015 Page 1 of 1 HONG International Corp. 3F, JnK Digital Tower 222-3, Guro-3Dong, Guro-Gu, Seoul, Republic of Korea Subject: Request for confidentiality FCC ID: 2ABCF-VSPHESDUAL Gentlemen: Pursuant to Sections 0.457 and 0.459 of the Commission's Rules, we hereby request confidential treatment of information accompanying this application as outlined below: ☑ Block Diagrams ☑ Operational Description ☑ Schematic Diagrams the above materials contain trade secrets and pr oprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. <Date> June 23, 2015 <City> Seoul <Name and signature of applicant> Byung Chang, Oh / Team Manager

Photo 1: Exterior Photographs Top Bottom Side 1 Side 2 Side 3 Side 4

Label Information 1. Label Location 2. Label Drawing Label position Made in Korea www.hong21.com Electronic Dart System Model : VSPHOENIX.S DUAL FCC ID : 2ABCF-VSPHESDUAL IC ID : 9811A-VSPHESDUAL POWER : AC 110V Manufacturer : HONG International Corp. 50mm This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 25mm

View of LED PCB 2(Top) View of LED PCB 2(Bottom) View of LED PCB 3(Top) View of LED PCB 3(Bottom) View of LED PCB 4(Top) View of LED PCB 4(Bottom) View of LED PCB 5(Top) View of LED PCB 5(Bottom) View of LED PCB 6(Top) View of LED PCB 6(Bottom) View of LED PCB 7(Top) View of LED PCB 7(Bottom) View of LED PCB 8(Top) View of LED PCB 8(Bottom) View of LED PCB 9(Top) View of LED PCB 9(Bottom) View of LED PCB 10(Top) View of LED PCB 10(Bottom) View of LED PCB 11(Top) View of LED PCB 11(Bottom) View of LED PCB 12(Top) View of LED PCB 12(Bottom) View of LED PCB 13(Top) View of LED PCB 13(Bottom) View of LED PCB 14(Top) View of LED PCB 14(Bottom) View of LED PCB 15(Top) View of LED PCB 15(Bottom) View of LED PCB 16(Top) View of LED PCB 16(Bottom) View of LED PCB 17(Top) View of LED PCB 17(Bottom) View of LED PCB 18(Top) View of LED PCB 18(Bottom) View of LED PCB 19(Top) View of LED PCB 19(Bottom) View of LED PCB 20(Top) View of LED PCB 20(Bottom) View of LED PCB 21(Top) View of LED PCB 21(Bottom) View of LED PCB 22(Top) View of LED PCB 22(Bottom) View of LED PCB 23(Top) View of LED PCB 23(Bottom) View of LED PCB 24(Top) View of LED PCB 24(Bottom) View of LED PCB 25(Top) View of LED PCB 25(Bottom) View of LED PCB 26(Top) View of LED PCB 26(Bottom)

Interior view of EUT Internal Photos View of Main PCB(Top) View of Main PCB(Bottom) View of RFID PCB(Top) View of RFID PCB(Bottom) View of CPU(Top) View of CPU(Bottom) View of Power Supply(Top) View of Power Supply(Bottom) Interior view of Power Supply Label of Power Supply View of RAM(Top) View of RAM(Bottom) View of SMPS(Top) View of SMPS(Bottom) View of SMPS Main PCB(Top) View of SMPS Main PCB(Bottom) Interior view of SMPS View of SSD(Top) View of SSD(Bottom) View of Coin Recognizer(Top) View of Coin Recognizer(Bottom) Interior view of Coin Recognizer View of Monitor 1(Top) View of Monitor 1(Bottom) View of Monitor 1 LCD(Top) View of Monitor 1 LCD(Bottom) View of Main PCB of Monitor 1(Top) View of Main PCB of Monitor 1(Bottom) View of Button PCB of Monitor 1(Top) View of Button PCB of Monitor 1(Bottom) Label of Monitor 1 LCD View of Monitor 2(Top) View of Monitor 2(Bottom) View of Monitor 2 LCD(Top) View of Monitor 2 LCD(Bottom) View of Main PCB of Monitor 2(Top) View of Main PCB of Monitor 2(Bottom) View of Button PCB of Monitor 2(Top) View of Button PCB of Monitor 2(Bottom) Label of Monitor 2 View of Audio PCB 1(Top) View of Audio PCB 1(Bottom) View of Audio PCB 2(Top) View of Audio PCB 2(Bottom) View of Audio Control PCB(Top) View of Audio Control PCB(Bottom) View of Contract Sheet(Top) View of Contract Sheet(Bottom) View of Contract Control PCB(Top)

TRF No.: EN 60335-2-82 F Attachments 3 : List of Critical Components Component (Part no.) Manufacturer(Brand) Mode(Type) Rating or Characteristics Tested by Plug I-Sheng Manufacturing ( SongGang) Factory SP-022 250 V~, 16 A CE Cord I-Sheng Manufacturing ( SongGang) Factory - 60227 IEC 53 (H05VV-F), 3G0.75 ㎟ CE Appliance couplers (Connector) I-Sheng Manufacturing ( SongGang) Factory IS-14 250 V~, 10 A CE Noise Filter Set Applianc e couplers (Applianc e Inlet) Dong il Technology Ltd DAC-4 250 V~, 10 A CE Noise Filter Dong il Technology Ltd IH-1022-H 250 V~, 10 A CE Current fuse Holder Schurter AG FPG 1 250 V~, 10 A CE Current Fuse Suzhou Littelfuse OVS.LTD 312 250 V~, 5 A CE Rocker Switch (Power) Ningbo Yinxian Lihe Switch Factory RL2 250 V~, 16 A CE Micro-Switch (Control_6EA) Qingdao Daesung Electronics Co., Ltd VP333A-0D 250 V~, 5 A CE TFT-LCD (Top) LG Display Co., Ltd LM230WF3 12d.c., 0.475 A CE SMPS (TFT-LCD_Top) Yantai Sam Hwa Polymers Co., Ltd. SAD04212-UV- 36 100-240 V~, 50/60 ㎐, 1.0 A (O/P : 12 Vd.c., 3 A) CE TFT-LCD (Bottom) LG Display Co., Ltd LM230WF3 12d.c., 0.475 A CE 직류전원장치 (TFT- LCD_Bottom) Yantai Sam Hwa Polymers Co., Ltd. SAD04212-UV- 36 100-240 V~, 50/60 ㎐, 1.0 A (O/P : 12 Vd.c., 3 A) CE SMPS Part(NES-50-24) TRF No.: EN 60335-2-82 PCB SHUNDE JUNDA ELECTRONIC CO LTD JD-D V-0 CE Current Fuse (FS1) Suzhou Walter Electronic Co., Ltd FSD 3.15A 250 V~, 3.15 A CE X-Capacitor (C1) Weixu Electronics (Shenzhen) Co., Ltd. GS-L 275 V~, 0.47 ㎌, X2 CE Line Filter(LF1) Mean Well LF-133-R1 15 mH, Class B CE X-Capacitor (C2) Weixu Electronics (Shenzhen) Co., Ltd. GS-L 275 V~, 0.1 ㎌, X2 CE Y-Capacitor (C3, C4) PT.Samcon SD 250 V~, 2 200 ㎊, Y1 CE Y-Capacitor (C30) PT.Samcon SD 250 V~, 4 700 ㎊, Y1 CE Transformer (S/W, T1) Mean Well TF-1013 Class B CE Y-Capacitor (C31) PT.Samcon SD 250 V~, 1 000 ㎊, Y1 CE Photocouper (U2, U3) SHARP PC123 Viso : 5 000 Vrms CE SMPS Part (NES-75-12) PCB SHUNDE JUNDA ELECTRONIC CO LTD JD-D V-0 CE Current Fuse (FS1) Suzhou Walter Electronic Co., Ltd FSD 3.15A 250 V~, 4 A CE X-Capacitor (C1) Weixu Electronics (Shenzhen) Co., Ltd. GS-L 275 V~, 0.47 ㎌, X2 CE Line Filter(LF1) Mean Well LF-132-R1 15 mH, Class B CE X- Capacitor (C2) Weixu Electronics (Shenzhen) Co., Ltd. GS-L 275 V~, 0.1 ㎌, X2 CE Y- Capacitor (C3, C4) PT.Samcon SD 250 V~, 4 700 ㎊, Y1 CE TRF No.: EN 60335-2-82 Y-Capacitor (C23) PT.Samcon SD 250 V~, 1s00 ㎊, Y1 CE Y- Capacitor (C30) PT.Samcon SD 250 V~, 220 ㎊, Y1 CE Transformer (S/W, T1) Mean Well TF-1302 Class B CE Y- Capacitor (C31) PT.Samcon SD 250 V~, 1 000 ㎊, Y1 CE Photocupler (U2, U3) SHARP PC123 Viso : 5 000 Vrms CE SMPS (Mainboard) Sea Sonic Electronics Co., Ltd SS-350ES 100-240 V~, 50/60 ㎐, 350 W CE Speaker (Built-in Amp) Guangzhou Yingxin Electronic Limited Pan Yu Manufacture Base S2-600B 220-240 V~, 50/60 ㎐, 22 W CE Enclosure (Front) LG Chemical - PP, HB - Enclosure - - Wood - NO DESCRIPTION SPECIFICATION PACKAGE U/PRICE LOCATION Q'TY REMARK VENDOR 1 IC MPU ATmega8-16AU TQFP U1 1 ATMEL 2 IC TTL 74HC00PW TSSOP U2 1 3 IC TTL 74HC123PW TSSOP U3 1 4 IC TTL MAX232 SOP U4 1 5 CRYSTAL 13.560MHz ATS-49/U X1 1 6 DIODE-SW EDS7000 SOT23 D1 1 7 FET 2N7002 SOT23 F1 1 NXP 8 TR-NPN BC817-25 SOT23 Q2~7 6 9 LED RED 1608 D2 1 10 INDUCTOR LCN0805T-R47J-N 2012 L3 1 YAGEO 11 INDUCTOR NLV25T-100J-PFL SMD L1 1 12 INDUCTOR NLV25T-101J-PFL SMD L5,6 2 13 BUZZER KPX-G1205A DIP PZ1 1 (OSC / O) 14 HEADER D-SUB9 ANGLE P1 1 15 CONNECTOR SMW250-02 DIP CN1 1 16 CONNECTOR SMW250-03 DIP CN3 1 17 CAP-C/C 20pF 1608 C1,2 2 18 CAP-C/C 47pF 1608 C13 1 19 CAP-C/C 68pF 1608 C6,9,10,11,12 5 23 CAP-C/C 270pF 1608 C25,41 2 24 CAP-C/C 470pF 1608 C7,21 2 25 CAP-C/C 680pF 1608 C14,15 2 27 CAP-C/C 1800pF 1608 C32 1 28 CAP-C/C 4700pF 1608 C33 1 29 CAP-C/C 6.8nF 1608 C19 1 30 CAP-C/C 10nF 1608 C18,20,22,27,30 5 31 CAP-C/C 100nF 1608 C16,31,40,CP1,2,3,4 7 32 CAP-C/C 1uF 1608 C17,23,24,28,35,36,37,38 8 33 CAP-C/C 4.7uF/16V Type A C3 1 34 CAP-T/T 10uF/16V Type B C39 1 35 CAP-T/T 100uF/10V Type C C42 1 36 CAP 470uF/16V 전해 1 37 RESISITOR 47 1608 R5,17,20,22,25,28,32 7 38 RESISITOR 100 1608 R2 1 39 RESISITOR 180 1608 R18 1 40 RESISITOR 390 1608 R4,23 2 41 RESISITOR 470 1608 R34,39 2 42 RESISITOR 680 1608 R21 1 43 RESISITOR 1K 1608 R9,11,14 3 44 RESISITOR 1.5K 1608 R40,41 2 45 RESISITOR 2K 1608 R24 1 46 RESISITOR 2.2K 1608 R8,16,27,35 4 47 RESISITOR 2.7K 1608 R29 1 48 RESISITOR 4.7K 1608 R3,7,13,33 4 49 RESISITOR 6.8K 1608 R15,26 2 50 RESISITOR 10K 1608 R19,37,38 3 51 RESISITOR 22K 1608 R30 1 52 RESISITOR 100K 1608 R10,36 2 53 RESISITOR 1M 1608 R1 1 54 PCB ReadIC2

Report Number: KSQ-FCC150611 FCC ID : 2ABCF-VSPHESDUAL IC ID: 9811A-VSPHESDUAL Page: 1 / 21 FCC Test Report Report Number KSQ-FCC150611 Applicant Company Name HONG International Corp. Address 3F, JnK Digital Tower 222-3, Guro-3Dong, Guro-Gu, Seoul, Republic of Korea Product Product Name Electronic Dart System Model Name VSPHOENIX.S DUAL FCC ID 2ABCF-VSPHESDUAL IC ID 9811A-VSPHESDUAL Manufacturer HONG International Corp. Serial No. - Country of origin Korea Other Receipt Date 2015.04.22 Receipt Number KSQ-2015-N-0424 Issued Date 2015.06.23 Tested Date 2015.06.11~2015.06.16 Standard FCC CFR 47 Part 15 Subpart C, RSS-GEN / RSS-210 Tested by Hak Hyeon, Yun (sign) Approved by Yeoung Ryul, Jo (sign) Korea Standard Quality Laboratories #102, Jangduk-Dong, Hwasung-City, Kyunggi-Do, KOREA. o This is certified that the above mentioned products have been tested for the sample provided by client. o No part of this document may not be duplicated or reproduced by any means without the express written permission of Korea Standard Quality Laboratories Report Number: KSQ-FCC150611 FCC ID : 2ABCF-VSPHESDUAL IC ID: 9811A-VSPHESDUAL Page: 2 / 21 Revision History Rev. Issue Date Revisions Revised By - 2015.06.23 Initial Issue Hak Hyeon, Yu n Report Number: KSQ-FCC150611 FCC ID : 2ABCF-VSPHESDUAL IC ID: 9811A-VSPHESDUAL Page: 3 / 21 CONTENTS 1. APPLICANT AND MANUFACTURER INFORMATION .......................................................................... 4 2. TEST RESULT CERTIFICATION ................................................................................................................ 4 2.1 Applicable standards ................................................................................................................................... 4 3. LABORATORY INFORMATION .................................................................................................................. 5 3.1 General ......................................................................................................................................................... 5 3.2 Test Site ........................................................................................................................................................ 5 3.3 Location ........................................................................................................................................................ 5 4. EUT INFORMATION ...................................................................................................................................... 6 4.1 Family Model ............................................................................................................................................... 6 4.2 EUT Modifications ...................................................................................................................................... 6 4.3 Antenna Requirement ................................................................................................................................. 6 5. Measurement conditions ................................................................................................................................... 7 5.1 Description of test modes ............................................................................................................................ 7 5.2 Description of test configuration ................................................................................................................ 7 5.3 Setup of equipmet under test ...................................................................................................................... 7 5.3.1. Description of support units ............................................................................................................... 7 6. Limite And Result .............................................................................................................................................. 9 6.1 Radiated Electric Field Emissions .............................................................................................................. 9 6.1.1 Regulation.............................................................................................................................................. 9 6.1.2 Test Condition ....................................................................................................................................... 9 6.1.3 Test result .............................................................................................................................................. 9 6.2 Radiated Electric Field Emissions ............................................................................................................ 10 6.2.1 Regulation............................................................................................................................................ 10 6.2.2 Test Procedure .................................................................................................................................... 10 6.2.3 Test Setup Layout ............................................................................................................................... 11 6.3 Frequency Stability .................................................................................................................................... 13 6.3.1 Regulation............................................................................................................................................ 13 6.3.2 Test Condition ..................................................................................................................................... 13 6.3.3 Test Setup Layout ............................................................................................................................... 13 6.3.4 Test result ...........................................................................................................…

Text truncated - open the document above for the full version.