2ABKFBER-TRV2SRadio Control

第 1 页 *Thank your for purchasing BER radio control products. *Beforing using,please patience reading this manual carefully. To work with your models correctly and safely.This product isBINDING PROCESS: (English) only equipped for radio controlled models.Transmitter (TR) with batteries and keep 3CH button switch on, 1. The usuage of this product should be approved by local lawthe TR led blue light flashing and buzzer sound ‘B-B-B...’. It is in and relevant regulations.matching status. Then receiver(RX)connect power, the RX led 2. We will not be responsible for the damange caused bygreen light slow flash, Putting RX close TR and keep RX BIND unauthorized modification, adjustment and replacement of partsbutton till led green light quick flash several times then slow flash, of this product.It shows binding successful. And turn off TR power and switch on 3. First trun on the transmitter make sure the batteries are wellTR again, RX led light green become solid, It's working status. loaded. The voltage of TR batteries is never low than 4.4V.Then please check and confirm that the servos are all well and proper connected. Finally the receiver connect the full power. 4. Keeping the radio away from moist,high temperature,and strong interference place. Please do not clean the radio with solvent. Do not strong shake. 5. The antenna (silver part) does not touch anything or be bent when radio working. Otherwise will inference the control range or lead the radio out of control. 6. Please do not play in night, bad weather such as rainy day or thundering days. Do not play beside high-voltage wire. Do not play near high power radio transmitting station etc. It will strong SERVO DIRECTION: Keeping the "TH. R/N" or "ST. R/N" interfere the transmitter signal and lead unexpected accident.button arrow mark 2 seconds and meanwhile buzzer sound "B". 7. Before playing, please making sure the movement of servoIt has reversed the direction of TH or ST servo. correspond with you used to. 8. Before starting, please making sure the TH and TH. TRIM in Le récepteur lié: (Français) the lowest position or TH. TRIM in the neutral position.Mettre la pile dans l’émetteur, appuyer sur la touche (3CH) pour 9. The sequence to end playing, Turning off the receiver first,démarrer, le voyant bleu LED sur l’émetteur clignote, Le ronfleur then turn off the transmitter(TR) power and take out batteries.lance le son « B-B-B », cela signifie l’entrée dans l’état de liaison. If operation is opposite, leading uncontrolled and accident.Brancher le récepteur,le voyant vert LED sur le récepteur clignote 10. If the operators do not comply with safty guides instruction.lentement. Approcher le récepteur à l’émetteur, appuyer sur la may lead to serious injuries to yourself or others.touche BIND pendant deux secondes, le voyant vert LED du 11. The manual may be altered without prior notice to. Pleaserécepteur clignotent vite, puis lentement, cela signifie la liaison contact us if you have any corrections or clarification that shouldréalisée. Eteindre l’émetteur, puis le démarrer. Le voyant LED du be made in this instruction.récepteur est allumé fixe, entre dans le mode de fonctionnement. La direction opposée de l’appareil de la barre: Appuyer sur la partie flèche de la touche "TH. R/N" ou "ST. R/N" pendant deux secondes, en même temps, le ronfleur lance un « B » l’appareil de la barre tourne vers la direction opposée. Instruction Manual <BER-TRV1S/TRV2S> QUICK OPERATOR GUIDE: BER digital proportional radio control FHSS system SAFETY GUIDE: BER 2.4GHz FHSS RADIO CONTROL SYSTEM 第 2 页 TH.TRIM AND ST.TRIM ADJUSTMENT "TH.TRIM" and "ST.TRIM" Each have two push buttons Pressing, buzzer sound type: "BBB>>>>>B<<<<<BBB" AUX CHANNEL ( 3CH )Big sound B in neutral positon Press 3CH button one timeCaution: TR rebinding RX can not change the" TH" or "ST" trim the 3ch servo moving 90°.position that you previously have been setted. Switching on TR Pressing again, return back.frist make sure" TH. TRIM" in lowest position. NOTE: When hold "3CH"HANDING FOR BATTERY swith on radio,It's in binding1. Making sure install the batteries are in correct polarity order. process. 3CH is a BINDIf batteries are loaded reversed, the TR may be damaged. button. Not 3CH at this time2, Using AA*4 dry batteres or Ni-MH*4 batteries. 3, We test use 2S Li-Po(7.4V) battery work but not guarantee, nor responsible for any damaged or injured if you insist on DIY do STEERING DUAL RATES ADJUSTMENT (ST.D/R)Caution: Before installing batteries, checking the correct polarity loaded and right connection is very necessary. Adjusting the dual rate ofRECEIVER(RX) CONNECTION DIAGRAM steering by adjusting ST.D/R knob, the picture showing FAIL SAFE SETUP (S/F) This function is to protect your models when signal weak or lost. F/S will automatic put TH in lowest positon or in setted place.TECHNOLOGY PARAMETER 1. The F/S is setted in receiver and setting data will be saved. TR TYPE : TRV1S/TRV2SBER-TRV1S/TRV2SRX TYPE : BER-RXV1C 2. To electronic power models, the F/S has been setted in RX.Channel: 3CHChannel: 3CH 3. To gas power model, Putting trigger in brake positon, keepingFrequency: 2.4GHzFrequency: 2.4GHz F/S button till led green light quick flash several times then goUse DC:6V 100mADC: 6V 20mA solid, releasing F/S button, this F/S function setted successfully.N.W.: 320gN.W.: 6g 4. Rebinding the receiver, need resetting the F/S function. R/F Power: ≤ 20dBm ; Sensititity: 1024 Modulation : 2-FSK ; Frequency Signal : FHSS Caution: For your safety, when has setted F/S function. Before playing, checking F/S function work is very necessary！ Den Empfänger binden: (Deutsch) Installieren Sie die Batterie auf den Sender,drücken Sie (3CH)- Taste und starten die Maschine, dann die blaue LED auf dem Sender blinkt. Der Summer klingt „B-B-B“, das bedeutet, dass der Empfänger in die gebundene Situation geht. Dann wird der Empfänger eingeschaltet, die grüne LED auf dem Empfänger blinkt langsam.Halten Sie den Empfänge…

Text truncated - open the document above for the full version.

Guangzhou Biaiyue Electronic Products Co.,Ltd. Family models difference declaration Tablet Model: BER-TRV2S, BER-TRV1S，BER-TRC4，BER-TRC4S，BER-ST4 Difference declaration: All models are the same circuit and RF module, except the model name. Regards, Signature Zheng jiang / Manager Date/City: 2023-02-10/Shenzhen Phone: +86-20-34786455 Fax: +86-20-34786455 E-mail: [email protected]

Guangzhou Biaiyue Electronic Products Co.,Ltd. PHOENIX TESTLAB GmbH Date: 10 February 2023 Product Certification Königswinkel 10 D 32825 Blomberg RE : LETTER OF AGENCY AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Guangzhou Biaiyue Electronic Products Co.,Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C.862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. If you have any questions, please feel free to contact me Yours sincerely, Signatory Printed Name: Zheng jiang Position: General Manager

Guangzhou Biaiyue Electronic Products Co., Ltd. Long/Short-term Confidentiality Request PHOENIX TESTLAB GmbH Date:10 February 2023 Product Certification Königswinkel 10 D 32825 Blomberg FCC ID:2ABKFBER-TRV2S To Whom It May Concerns, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, we hereby request long-term confidential treatment of information accompanying this application as outlined below: Schematics Parts List Block Diagram Tune-Up Info Operational Description In addition we hereby request the following exhibits contained in this application to be temporarily (short-term confidentiality) withheld from the public disclosure foran initial period of 180days ☐ until: ☐ not applicable External Photos Test Setup Photos Internal Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. If you have any questions, please feel free to contact me. Yours sincerely, Signatory Printed Name:Zheng jiang Guangzhou Biaiyue Electronic Products Co., Ltd. Position: General Manager

Guangzhou Biaiyue Electronic Products Co., Ltd. Ersteller: D. Brandhorst Revision: 00 Erstelldatum: 13.06.2014 Datum: 00.00.00 Seite 1 von 1 PHOENIX TESTLAB GmbH Date: 10 February 2023 Product Certification Königswinkel 10 D 32825 Blomberg Subject: Declaration Operating Channel Limitation FCC ID: 2ABKFBER-TRV2S IC: To Whom it may concern, This device is acting either as slave/client device under the control of a master. The operating channels in 2-FSK mode for the device marketed to the US/Canada are firmware limited to channel 1 ~ 16 (2406 ~ 2481 MHz). The end-user has no possibility to select any other operating channels. If you have any questions, please feel free to contact me. Thank you. Sincerely, Signatory [Zheng jiang, General Manager] [Guangzhou Biaiyue Electronic Products Co., Ltd.]

Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7

Label & Location