2ABLQ-NOGOBTBluetooth portable speaker

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 3 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (current) 3.0 4.0 May-23-2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 3 Rev 4.0 NOGO INTERNATIONAL CO., LTD 2014-08-12 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _ NOGO INTERNATIONAL CO., LTD _ hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: 2ABLQ-NOGOBT Bluetooth portable speaker MODEL No.: NB11 Sincerely, signature Johnson You/Export Manager E-mail: [email protected] Phone: 0755-27388660 Fax: 0755-29603967 Address The 4th F.of Bldg.1, Huangtian industrial zone, Xixiang town, Bao'an district, Shenzhen, China SCS-F18: Project and Product Certification Representative Authorization Letter Page 3 of 3 Rev 4.0 NOGO INTERNATIONAL CO., LTD 2014-08-12 To: SIEMIC, Inc. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, _ NOGO INTERNATIONAL CO., LTD _ hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: 2ABLQ-NOGOBT Bluetooth portable speaker MODEL No.: NB11 We affirm that between SIEMIC, Inc. and _ NOGO INTERNATIONAL CO., LTD. any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, signature Johnson You/Export Manager E-mail: [email protected] Phone: 0755-27388660 Fax: 0755-29603967 Address The 4th F.of Bldg.1, Huangtian industrial zone, Xixiang town, Bao'an district, Shenzhen, China

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 NOGO INTERNATIONAL CO., LTD 2014-08-12 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2ABLQ-NOGOBT We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signature Johnson You/Export Manager E-mail: [email protected] Phone: 0755-27388660 Fax: 0755-29603967 Address The 4th F.of Bldg.1, Huangtian industrial zone, Xixiang town, Bao'an district, Shenzhen, China

External Photos

Label Location Label Contents Label Size: 24mm*14mm

Internal Photos Bluetooth Module Bluetooth Module

FCC ID: 2ABLQ-NOGOBT Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz； Power and distance are rounded to the nearest mW and mm before calculation； The result is rounded to one decimal place for comparison； The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. We use 5mm as separation distance to calculate. Maximum measured transmitter power: BT DSS: Transmit Frequency (GHz) Mode Max Conducted Power (dBm) Result calculation 1-g SAR 2.402 GFSK 4.885 0.955 3.0 2.441 GFSK 4.900 0.964 3.0 2.480 GFSK 4.916 0.977 3.0 2.402 1/4Π-DQPSK 4.647 0.902 3.0 2.441 1/4Π-DQPSK 4.656 0.911 3.0 2.480 1/4Π-DQPSK 4.656 0.911 3.0 2.402 8DPSK 4.670 0.905 3.0 2.441 8DPSK 4.672 0.914 3.0 2.480 8DPSK 4.673 0.923 3.0 Conclusion: For the max result : 0.977≤ 3.0 for 1-g SAR extremity SAR, No SAR is required.

TRF No.: FCC 15.247/A Page 1 of 56 Report No.: ES140725307E Ver.1.0 Shenzhen EMTEK Co.,Ltd. Building 69, Majialong Industry Zone, Nanshan District, Shenzhen,Guangdong,China www.emtek.com.cn Tel: +86-755-2695 4280 Fax: +86-755-2695 4282 Access to the World ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPARTC REQUIREMENT OF Bluetooth portable speaker MODEL No.: NB11 FCC ID: 2ABLQ-NOGOBT Trade m a rk : REPORT NO.: ES140725307E ISSUE DATE: August 12, 2014 Prepared for NOGO INTERNATIONAL CO., LTD The 4th F.of Bldg.1, Huangtian industrial zone, Xixiang town, Bao'an district, Shenzhen, China Prepared by SHENZHEN EMTEK CO., LTD. Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China TEL: 86-755-26954280 FAX: 86-755-26954282 TRF No.: FCC 15.247/A Page 2 of 56 Report No.: ES140725307E Ver.1.0 Shenzhen EMTEK Co.,Ltd. Building 69, Majialong Industry Zone, Nanshan District, Shenzhen,Guangdong,China www.emtek.com.cn Tel: +86-755-2695 4280 Fax: +86-755-2695 4282 Access to the World VERIFICATION OF COMPLIANCE Applicant: NOGO INTERNATIONAL CO., LTD The 4th F.of Bldg.1, Huangtian industrial zone, Xixiang town, Bao'an district, Shenzhen, China Manufacturer: Shenzhen Xin Feng Long Industrial CO., LTD The 4th F.of Bldg.1, Huangtian industrial zone, Xixiang town, Bao'an district, Shenzhen, China Product Description: Bluetooth portable speaker Model Number: NB11 File Number: ES140725307E Date of Test: July 25, 2014 to August 12, 2014 We hereby certify that: The above equipment was tested by SHENZHEN EMTEK CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2009) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247. The test results of this report relate only to the tested sample identified in this report. Date of Test : July 25, 2014 to August 12, 2014 Prepared by : Yaping Shen/Editor Reviewer : Joe Xia/Supervisor Approve & Authorized Signer : Lisa Wang/Manager TRF No.: FCC 15.247/A Page 3 of 56 Report No.: ES140725307E Ver.1.0 Shenzhen EMTEK Co.,Ltd. Building 69, Majialong Industry Zone, Nanshan District, Shenzhen,Guangdong,China www.emtek.com.cn Tel: +86-755-2695 4280 Fax: +86-755-2695 4282 Access to the World Ta b l e o f C o n t e n t s 1 GENERAL INFORMATION ......................................................................................................... 5 1.1 PRODUCT DESCRIPTION ........................................................................................................................... 5 1.2 RELATED SUBMITTAL(S) / GRANT (S) ..................................................................................................... 5 1.3 TEST METHODOLOGY .............................................................................................................................. 5 1.4 SPECIAL ACCESSORIES ............................................................................................................................ 5 1.5 EQUIPMENT MODIFICATIONS .................................................................................................................. 5 1.6 TEST FACILITY ........................................................................................................................................ 6 2. SYSTEM TEST CONFIGURATION .............................................................................................. 7 2.1 EUT CONFIGURATION ............................................................................................................................. 7 2.2 EUT EXERCISE ........................................................................................................................................ 7 2.3 TEST PROCEDURE .................................................................................................................................... 7 2.4 LIMITATION ............................................................................................................................................. 7 2.5 CONFIGURATION OF TESTED SYSTEM ................................................................................................... 11 2.6 DESCRIPTION OF TEST MODES ................................................................................................................ 11 3. SUMMARY OF TEST RESULTS ....................................................................................... 12 4. CONDUCTED EMISSIONS TEST ..................................................................................... 13 4.1 MEASUREMENT PROCEDURE: ................................................................................................................ 13 4.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ....................................................................... 13 4.3 MEASUREMENT EQUIPMENT USED: ...................................................................................................... 13 4.4 CONDUCTED EMISSION LIMIT ................................................................................................................ 13 4.5 MEASUREMENT RESULT: ....................................................................................................................... 14 5. RADIATED EMISSION TEST ............................................................................................ 16 5.1 MEASUREMENT PROCEDURE ................................................................................................................. 16 5.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ....................................................................... 17 5.3 MEASUREMENT EQUIPMENT USED: ...................................................................................................... 18 5.4 MEASUREMENT RESULT ....…

Text truncated - open the document above for the full version.

Setup photos Conducted Emissions Test Radiated Emission Test