2ABMA-888-700-205Tablet PC

User Manual Model No.:888-700-205 -7.85 inches tablet This handbook contains important security measures and the correct use of the product information. In order to avoid accident, please make sure to reading the manual carefully before use the device. Production specification for 7.85 inches tablet 1 Attention: This instruction contains the correct use of the product information,in order to avoid accidents. Please make sure to reading the manual carefully before use the device.  Do not use alcohol, diluents or any other chemicals to clean the surface, otherwise, it will be corroded and even damaged.  Please don’t be in high temperature, moisture or very dust place.  Please choose the appropriate volume. Use headphones should not be too big volume, if feel tinnitus, lower the volume or stop using it.  Please charge the following condition, A. The battery power ICONS shows have no power. B. The system automatically shut off, startup after power off soon. C. Operation buttons no response. D. The machine that the top right corner show red icons.  When the device in the format or ongoing upload and download file, please don’t suddenly disconnect, this could cause application error.  USB just only be used for data transmission.  Performance and functionality of the product may be different if the version of software and hardware is different. Any change will be without notice. Our company reserves the right to improve the products.  If you have any questions about the tablet, please contact with us. Attempt to disassemble the product may damage it and avoid your warranty. Users will be responsible for all the consequences caused by disassembling. Main Functions:  7.85”1024*768 capacitive touch screen.  Based on the Android 4.2 operating system and supports WiFi and BT function.  Supports MP3/AAC/OGG/WAV for audio.  Supports automatic browse for picture in JPG/BMP/JPEG/GIF.  Supports AVI/3GP/MP4/MKV/MOV/TS/FLV and up to 1080P for video.  Supports OTG function, external mouse and keyboard. Operational Description: Production specification for 7.85 inches tablet 2  Port function Description  DC Port: +12V DC Power Socket. 2.5mm barrel type.  LYNX Port: You can use it to connect the tablet to LYNX audio products.  Audio Port: You can use it to connect the tablet to I²S audio devices.  HDMI Port: You can use it to connect the tablet to HD video display.  USB Port: just only be used for data transmission.  SD Card Socket: Adds additional storage to tablet.  Ethernet Socket: Ethernet network port.  SIM Card Socket: For use with option modem. Not current used.  GIPO: You can use it to connect the tablet to keyboard by which you can get functions, such as on/off, reset, increase/decrease sound volume,reboot and so on.  Basic Operations Home Screen:After startup will enter the main interface. In the main interface, you can，  Management the main interface software ICONS: long press the icons 3 s, after the icons will bigger, then you can drag anywhere in theinterface.  Delete icons: long press the icons 3 second, drag the icons to the Remove Bin icon, once it become red, remove your hand, after that you can delete icon. You touch the screen keep a time, appear the dialog box “Add your homeScreen” as shown below: Production specification for 7.85 inches tablet 3  Click the icon and enter the setting interface.  Click the icon and enter the application program interface.In the application program interface, the tablet will display all apps screen.Touch any application icon andenter the relevant application program interface. Status bar describe,  Click the icon and return to the upper interface.  Click the icon and return to the main screen.  Click the icon and open the list of application which recently used.  Click the icon and save screenshot.  Click the icon and increase sound volume.  Click the icon and decrease sound volume.  Status bar, It is used to show thecurrent status of network connection and wifi connection, battery life and system time.  Setting  WiFi Internet Settings The first step: open Wi-Fi and the system automatically scan the available network. The second step: select target network and input the correct network password. Select“Connect”. Production specification for 7.85 inches tablet 4 In this interface, you can search Bluetooth, View, Bandwidth Usage, Sound, Display, Storage, Battery, App, Security, Back up & Option, Date & Time, Language & Input, Accessibility, About tablet and so on. You can set according your demand, as picture.  Basic Circuit Description Power input:  The tablet is powered from a 12V DC power supply.  ChipAXP209 is used as PMU.The AXP209 provides under/over voltage protection. It generates all internally used voltages and manages battery charge and discharge: It provides voltage temperature and battery monitoring information to the main processor.  An internal 3.7V battery is only present to aid in normal shutdown. CPU Production specification for 7.85 inches tablet 5  Allwinner A20 HD SOC  ARM Cortex-A8 single Core 1Ghz  32KB I-Cache/32 KB D-Cache/256 k L2 Cache Crystal  A20 integrates two crystal oscillators: The 24MHZ crystal is mandatory, which is used to provide clock source for the PLL and the main digital blocks, and the 32768HZ oscillator, which is only used to provide a low power, accurate reference for the RTC.25MHzcrystal is used to provide clock source for Realtek RTL8201CP which is a Fast Ethernet PHYceiver with selectable MII interface to the EMAC chip. GPU  MALI400 2D/3D  2D support BLT/ROP2/3/4, 3D support Open GL ES 2.0/open VG 11.1  Video Decoding (Supper HD 2160P) VP8, AVS, H.264, H.263, VC-1, MPEG-1/2/4  Video Encoding – Support 1920*1080@60fps in all formats  Support encoding in H.264 High Profile format 108p@60fps 720p @100fps Memory  1GB DDR3 RAM (up to 2GB)  4GB NAND Flash (up to 64GB) Display Output  Support HDMI V1.3/V1.4, up to 2160P  Flexible LCD interface (CPU/Sync RGB/LVDS) up…

Text truncated - open the document above for the full version.

LYNX INNOVATION LTD Jan. 10, 2014 Federal Communications Commission Authorization and Evaluation Division FCC ID：2ABMA-888-700-205 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1. Block Diagram CONF APPENDIX 2ABMA _Block Diagram.pdf 2. Circuit Diagram CONF APPENDIX 2ABMA _Schematics.pdf 3. Operational Description CONF APPENDIX 2ABMA _Operational description.pdf 4. Tune up procedure CONF 2ABMA _Tune up procedure.pdf 5. BOM List CONF 2ABMA _BOM List .pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, Signature Name/Title: Kevin Huljich / Manager Applicant: LYNX INNOVATION LTD ADDRESS: UNIT 8A 331 ROSEDALE ROAD ALBANY AUCKLAND New Zealand TEL: +64 9 448 2361 FAX: +64 9 414 7133 Email: [email protected]

External Photo

Internal Photos

Report No. SET2014-00116 CCIC-SET/T-I (00) Page 1 of 60 FCC SAR TEST REPORT Report No.： SET2014-00116 Product Name： 7”Tablet Brand Name： LYNX Model No.： 888-700-205 FCC ID： 2ABMA-888-700-205 Applicant： LYNX INNOVATION LTD Address： UNIT 8A 331 ROSEDALE ROAD ALBANY AUCKLAND New Zealand Issued by： CCIC-SET Lab Location： Electronic Testing Building, Shahe Road，Xili, Nanshan District, Shenzhen, 518055, P. R. China Tel： 86 755 26627338 Fax：86 755 26627238 Mail： [email protected] Website：http://www.ccic-set.com This test report consists of 60 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CCIC-SET. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to CCIC-SET within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. Report No. SET2014-00116 CCIC-SET/T-I (00) Page 2 of 60 Test Report Product Name 7”Tablet Model No LYNX FCC ID 2ABMA-888-700-205 Applicant LYNX INNOVATION LTD Applicant Address UNIT 8A 331 ROSEDALE ROAD ALBANY AUCKLAND New Zealand Manufacturer JIAXING LYNX DISPLAYS LIMITED Manufacturer Address FL.1 BLDG. 7 #3288 ZHONGSHAN RD(W) XIUZHOU INDUSTRIAL PARK JIAXING ZHEJIANG 314000 CHINA Test Standards 47CFR §2.1093- Radiofrequency Radiation Exposure Evaluation: Portable Devices; FCC OET Bulletin 65 (Edition 97-01), Supplement C (Edition 01-01): Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz; IEEE 1528–2003: Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques; Test Result Pass Tested by 2014-01-06 Mei Chun, Test Engineer Reviewed by 2014-01-06 Shuangwen Zhang, Senior Egineer Approved by 2014-01-06 Wu Li’an , Manager Report No. SET2014-00116 CCIC-SET/T-I (00) Page 3 of 60 Contents 1. GENERAL CONDITIONS 2. ADMINISTRATIVE DATA 2.1. Identification of the Responsible Testing Laboratory 2.2. Identification of the Responsible Testing Location(s) 2.3. Organization Item 2.4. Identification of Applicant 2.5. Identification of Manufacture 3. EQUIPMENT UNDER TEST (EUT) 4. OPERATIONAL CONDITIONS DURING TEST 4.1. Introduction 4.2. SAR Definition 4.3. Phantoms 4.4. Device Holder 4.5. Probe Specification 5. OPERATIONAL CONDITIONS DURING TEST 5.1. Schematic Test Configuration 5.2. SAR Measurement System 5.3. Equipments and results of validation testing 5.4. SAR measurement procedure 5.5. Antennas position 6. CHARACTERISTICS OF THE TEST 6.1. Applicable Limit Regulations 6.2. Applicable Measurement Standards 7. LABORATORY ENVIRONMENT 8. TEST RESULTS 8.1. Summary of Measurement Results 8.2. Conclusion 9. MEASUREMENT UNCERTAINTY 10. MAIN TEST INSTRUMENTS This Test Report consists of the following Annexes: Annex A: Accreditation Certificate Annex B: Test Layout Annex C: Sample Photographs Annex D: System Performance Check Data Annex E: Calibration Certificate of Probe and Dipoles Report No. SET2014-00116 CCIC-SET/T-I (00) Page 4 of 60 1．GENERAL CONDITIONS 1.1 This report only refers to the item that has undergone the test. 1.2 This report standalone does not constitute or imply by its own an approval of the product by the certification Bodies or competent Authorities. 1.3 This document is only valid if complete; no partial reproduction can be made without written approval of CCIC-SET. 1.4 This report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of CCIC-SET. and the Accreditation Bodies, if it applies. Report No. SET2014-00116 CCIC-SET/T-I (00) Page 5 of 60 2. Administrative Date 2.1. Identification of the Responsible Testing Laboratory Company Name: CCIC-SET Department: EMC & RF Department Address: Electronic Testing Building, Shahe Road, Nanshan District, Shenzhen, P. R. China Telephone: +86-755-26628676 Fax: +86-755-26627238 Responsible Test Lab Managers: Mr. Wu Li’an 2.2. Identification of the Responsible Testing Location(s) Company Name: CCIC-SET Address: Electronic Testing Building, Shahe Road, Nanshan District, Shenzhen, P. R. China 2.3. Organization Item CCIC-SET Report No.: SET2014-00116 CCIC-SET Project Leader: Mr. Li Sixiong CCIC-SET Responsible for accreditation scope: Mr. Wu Li’an Start of Testing: 2013-12-30 End of Testing: 2013-12-30 2.4. Identification of Applicant Company Name: LYNX INNOVATION LTD Address: UNIT 8A 331 ROSEDALE ROAD ALBANY AUCKLAND New Zealand 2.5. Identification of Manufacture Company Name: JIAXING LYNX DISPLAYS LIMITED Address: FL.1 BLDG. 7 #3288 ZHONGSHAN RD(W) XIUZHOU INDUSTRIAL PARK JIAXING ZHEJIANG 314000 CHINA Notes: This data is based on the information by the applicant. Report No. SET2014-00116 CCIC-SET/T-I (00) Page 6 of 60 3. Equipment Under Test (EUT) 3.1. Identification of the Equipment under Test Sample Name: 7”Tablet Type Name: LYNX General description: Support band Wi-Fi 2.4 GHz, Bluetooth 2.1+EDR Test band Wi-Fi 2.4 GHz, Bluetooth 2.1+EDR Development Stage Identical Prototype Accessories Power Supply Battery type XDC-1S1P1000 Battery specification 1200mAh/3.7V Antenna type IFA Antenna Operation mode 802.11b, 802.11g, 802.11n-20MHz, 802.11n-40MHz Bluetooth Modulation mode GFSK/π/4-DQPSK/8-DPSK, DSSS, OFDM Max. SAR Value 0.395 W/Kg NOTE: a. The EUT is a model of 7”Tablet, it could support 802.11b, 802.11g, 802.11n-20MHz, 802.11n-40MHz , Bluetooth 2.1+EDR. b. Since the EUT didn’t support voice function, only support data function, the tests were carried out against body. c. Pleas…

Text truncated - open the document above for the full version.

Report No.: SET2014-00112 CCIC-SET/T（00） Page 1 of 78 RF TEST REPORT Report No.: SET2014-00112 Product Name: 7” Tablet FCC ID: 2ABMA-888-700-205 Model No. : 888-700-205 Applicant: Address: LYNX INNOVATION LTD UNIT 8A 331 ROSEDALE ROAD ALBANY AUCKLAND New Zealand Issued by: CCIC-SET Lab Location: Electronic Testing Building, Shahe Road, Xili, Nanshan District, Shenzhen, 518055, P. R. China Tel: 86 755 26627338 Fax: 86 755 26627238 This test report consists of 78 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CCIC-SET. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to CCIC-SET within 20 days since the date when the report is received. It will not be taken into consideration beyond this limit. Report No.: SET2014-00060 CCIC-SET/T（00） Page 2 of 78 Test Report Product Name ...................... : 7” Tablet Brand Name ......................... : LYNX Trade Name .......................... : LYNX Applicant .............................. : LYNX INNOVATION LTD Applicant Address ............... : UNIT 8A 331 ROSEDALE ROAD ALBANY AUCKLAND New Zealand Manufacturer ........................ : JIAXING LYNX DISPLAYS LIMITED Manufacturer Address ........ : FL.1 BLDG. 7 #3288 ZHONGSHAN RD(W) XIUZHOU INDUSTRIAL PARK JIAXING ZHEJIANG 314000 CHINA Test Standards ..................... : 47 CFR Part 15 Subpart C：Radio Frequency Devices ANSI C63.10:2009：American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 DTS Meas Guidance v03r01 Test Result ........................... : PASS Tested by ............................ : 2014-01-06 Lu Lei，Test Engineer Reviewed by ......................... : 2014-01-06 Shuangwen Zhang, Senior Egineer Approved by ........................ : 2014-01-06 Wu Li’an，Manager Report No.: SET2014-00060 CCIC-SET/T（00） Page 3 of 78 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................... 5 1.1 EUT Description ......................................................................................................................... 5 1.2 Test Standards and Results ........................................................................................................ 6 1.3 Facilities and Accreditations ...................................................................................................... 7 1.3.1 Facilities .................................................................................................................................... 7 1.3.2 Test Environment Conditions .................................................................................................... 7 2. 47 CFR PART 15C REQUIREMENTS .................................................................................... 8 2.1 Antenna requirement ................................................................................................................. 8 2.1.1 Applicable Standard .................................................................................................................. 8 2.1.2 Antenna Information ................................................................................................................. 8 2.1.3 Result: comply .......................................................................................................................... 8 2.2 Peak Output Power .................................................................................................................... 9 2.2.1 Requirement .............................................................................................................................. 9 2.2.2 Test Description ........................................................................................................................ 9 2.2.3 Test Result ................................................................................................................................. 9 2.3 Bandwidth ................................................................................................................................. 16 2.3.1 Requirement ............................................................................................................................ 16 2.3.2 Test Description ...................................................................................................................... 16 2.3.3 Test Result ............................................................................................................................... 16 2.4 Conducted Spurious Emissions ............................................................................................... 25 2.4.1 Requirement ............................................................................................................................ 25 2.4.2 Test Description ...................................................................................................................... 25 2.4.3 Test Result ............................................................................................................................... 25 2.5 Power spectral density (PSD) .................................................................................................. 34 2.5.1 Requirement ............................................................................................................................ 34 2.5.2 Test Description ...................................................................................................................... 34 2.5.3 Test Result ............................................................................................................................... 35 …

Text truncated - open the document above for the full version.

Radiated Emission Test setup photos 9K~30M 30M~1G 1G~18G 18G~25G Conducted Emission Test setup photo Conducted Test setup photo