2ABMJ-RF-1Bluetooth Music Fountain

Owner’s Manual Bluetooth Music Fountain Contents Step1: Battery and Speaker Assembly 1 Step 2: Pump and Battery Installation 3 Step 3: Setting Up Your Fountain 6 Fill Your Fountain 7 Operating Your Fountain 7 Troubleshooting and Maintenance Recharging Th e Battery 8 Cleaning the Water Pump’s Parts 9 Water Pump Air Filters 9 Water Pump Impeller 9 Priming the Water Pump 10 IMPORTANT BATTERY SAFETY INSTRUCTIONS, READ FIRST DANGER: Do not store battery in an airtight container as it may cause an explosion. PROPOSITION 65 WARNING: Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling. WARNING: When using electric devices, basic safety precautions should always be fol- lowed to reduce the risk of fi re, electric shock and personal injury, including the following: WARNING: 1. Do not incinerate the battery even if it is severely damaged or is completely worn out. The battery can explode in a fi re. Check with municipal codes in your area for possible special disposal instructions. 2. If liquid leaks from the battery cell, discontinue use immediately and dispose of properly. 3. Do not charge battery in rain or in wet location. 4. Never attempt to open the battery for any reason. If the plastic housing of the battery breaks or cracks, immedi- ately discontinue use and do not recharge. If the battery appears to be dusty or dirty, wipe it off with a soft cloth. 5. Use only the included battery. Contact our customer service line for a replacement at 888-648-2011. 6. Do not attempt to disassemble, remodel or destroy the battery, as it may cause battery leakage, fi re, or bursting; and could also create sulfuric acid spills from the battery resulting in possible burns to person and damage to the immediate environment. 7. Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets or keys. The battery or conductor may overheat and cause burns. 8. The battery contains diluted sulfuric acid, a very toxic substance. If the battery leaks and the liquid inside spills on the skin or clothing, immediately wash it off with plenty of clean water. If the liquid splashes into eyes, imme- diately fl ush the eyes with plenty of clean water and consult a doctor. Sulfuric acid in the eyes may cause loss of eyesight and acid on the skin will cause burns. 9. Charge battery using the specifi ed charger and under the charging conditions as specifi ed. Charging the battery under any other conditions may cause the battery to overheat, emit hydrogen gas, leak, ignite or burst. 10. When this product is not used for 30 days or more, remove the battery from the fountain, charge it fully and store in a place where humidity is low. Do not store the battery under direct sunlight or in high temperatures. Unsatisfactory storage conditions may cause deterioration in battery performance, and may shorten the service life. 11. When charging the battery always do so in a well ventilated area and where you can observe the charging process. 12. Never dispose of batteries in the garbage. Disposal of batteries in the garbage is unlawful under state and federal environmental laws and regulations. Always take used batteries to your local battery-recycling center. 13. DO NOT CHARGE ON COUNTER TOPS, CARPETS OR OTHER FINISHED SURFACES. IT IS RECOM- MENDED THAT THE BATTERY BE PLACED ON A CONCRETE SURFACE WHILE CHARGING. Parts for Your Bernini Fountain Fountain Body Rechargeable Battery Water Pump Speaker Assembly Access Panel Cover Step 1: Battery and Speaker Assembly Parts you will need for this section 1 Rechargeable Battery Speaker Assembly 2 Slide battery into speaker harness with cord receptacles facing away from the speaker. Make sure to keep speaker cord clear of harness while installing battery. Completed speaker and battery as- sembly. The battery will fi t snugly (but may need to be adjusted during as- sembly installation - next step). At this point, your speaker and battery assembly should look like the image above. Go to the next page for the next step to set up your new Bernini Fountain. 3 Step 2: Pump and Battery Installation Parts you will need for this section Fountain Body Water Pump Battery & SpeakerAccess Panel Cover 4 Securely attach plastic tube to nip- ple on the back of the water pump. Place water pump in the reservoir on the right. Make sure the pump lays fl at with tube sticking up. The pump may need to be primed (instructions on page 10). Insert battery assembly, speaker fi rst, into the left compartment. Properly installed, the battery will lay fl at on the bottom surface of the compartment. Pump BlackYellow Green Red Blue For initial bat- tery installation, you do not need the black and yellow recepta- cles. When connecting USB cord, make sure the USB logo is facing toward you. Speaker USB USB NOTE: The battery may need to be partially removed from speaker harness to securely fi t plugs. Make sure to fully insert all plugs and arrange cords completely inside the compartment. 5 At this point, your fountain should look like the image on the left (rear view). Go to the next page for the next step to set up your new Bernini Fountain. Battery and speaker assembly secure- ly in place in left compartment.. Align access panel cover with guide rail on top. Slide into place to close. Step 3: Setting Up Your Fountain Parts you will need for this section 6 Fountain assembled & Water to fi ll your fountain 7 Fill Your Fountain Fill the fountain until water circulates through the system. You can remove the access panel cover on the back to access the reservoir and add additional water if necessary. Operating Your Fountain The on-board control panel is located on the side of the fountain. See the diagram below to see how the all-new on-board controls work for your Bernini Fountain. Music Features Selector/Volume System ON/OFF Status Light Mu…

Text truncated - open the document above for the full version.

Yeiser Research & Development, LLC FCC Authorization Letter We, (the approval holder) Company name Yeiser Research & Development, LLC Addresss 9338 Bond Avenue, EL Cajon, CA92021, City El Cajon Country United States declare that the following representative (agent): Name (person) Sam Lv Company name DONGGUAN EMTEK CO., LTD. Addresss No.281, Guantai Road, Nancheng District, City Dongguan Country China is hereby authorized to apply the following equipment for certification on our behalf: Product Description Bluetooth Music Fountain Type or Model(s) RF-1 Tradename or Brand(s) BERNINI FOUNTAINS Attestation:

Yeiser Research & Development, LLC FCC Authorization Letter To the FCC and FCC TCB handling this application for certification Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name Yeiser Research & Development, LLC Addresss 9338 Bond Avenue, EL Cajon, CA92021, City El Cajon Country United States request non-disclosure and confidential treatment for our certification under: Grantee Code Product Number FCC ID: 2ABMJ -RF-1 of the following materials submitted within this certification application: (please cross what is applicable, or add other documents) √ Operational Description √ Block Diagrams √ Schematics Diagrams √ Bill of Materials Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. Attestation:

General Appearance of the EUT

Label Location

Model Number： ：： ：RF-1 Batteries： ：： ：6V 4Ah Batch No.： ：： ：2014.02.01 FCC ID： ：： ：2ABMJ-RF-1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Antenna

TRF No. FCC Part 15.247/A Page 1 of 61 Report No. KAD140106019E Rev1.0 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Bluetooth Music Fountain MODEL No.: RF-1 TRADE MARK: BERNINI FOUNTAINS FCC ID: 2ABMJ-RF-1 REPORT NO: KAD140106019E ISSUE DATE: January 22, 2014 Prepared for Yeiser Research & Development, LLC 9338 Bond Avenue, EL Cajon, CA92021, USA Prepared by DONGGUAN EMTEK CO., LTD. No.281, Guantai Road, Nancheng District, Dongguan, Guangdong, China TEL: 86-769-22807078 FAX: 86-769-22807079 TRF No. FCC Part 15.247/A Page 2 of 61 Report No. KAD140106019E Rev1.0 VERIFICATION OF COMPLIANCE Applicant: Yeiser Research & Development, LLC 9338 Bond Avenue, EL Cajon, CA92021, USA Manufacturer: Winty Industries Corporation(ShenZhen)Co.,Ltd Sanlian Industry Zone,Shiyan Town,Bao'an ,ShenZhen City Product Description: Bluetooth Music Fountain Trade Mark: BERNINI FOUNTAINS Model Number: RF-1 Kind of Device: Bluetooth Ver. 2.1+EDR File Number: KAD140106019E Date of Test: January 06, 2014 to January 20, 2014 We hereby certify that: The above equipment was tested by DONGGUAN EMTEK CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2009) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247(2012). The test results of this report relate only to the tested sample identified in this report. Approved By Sam Lv / Q.A. Manager DONGGUAN EMTEK CO., LTD. TRF No. FCC Part 15.247/A Page 3 of 61 Report No. KAD140106019E Rev1.0 Modified History Rev. Summary Date of Rev. Report No. V1.0 Original Report 2014-01-22 KAD140106019E TRF No. FCC Part 15.247/A Page 4 of 61 Report No. KAD140106019E Rev1.0 Table of Contents 1. GENERAL INFORMATION ....................................................................................... 6 1.1 PRODUCT DESCRIPTION............................................................................................................... 6 1.2 RELATED SUBMITTAL(S) / GRANT (S)............................................................................................ 6 1.3 TEST METHODOLOGY.................................................................................................................. 6 1.4 SPECIAL ACCESSORIES................................................................................................................ 6 1.5 EQUIPMENT MODIFICATIONS........................................................................................................ 7 1.6 TEST FACILITY............................................................................................................................. 7 2. SYSTEM TEST CONFIGURATION ........................................................................... 8 2.1 EUT CONFIGURATION.................................................................................................................. 8 2.2 EUT EXERCISE............................................................................................................................ 8 2.3 TEST PROCEDURE....................................................................................................................... 8 2.4 LIMITATION.................................................................................................................................. 9 2.5 CONFIGURATION OF TESTED SYSTEM........................................................................................ 12 3. SUMMARY OF TEST RESULTS ............................................................................. 13 4. DESCRIPTION OF TEST MODES........................................................................... 14 5. CONDUCTED EMISSIONS TEST ........................................................................... 15 5.1 MEASUREMENT PROCEDURE: .................................................................................................... 15 5.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION)............................................................... 15 5.3 MEASUREMENT EQUIPMENT USED: ............................................................................................ 15 5.4 MEASUREMENT RESULT: ............................................................................................................ 15 5.5 CONDUCTED MEASUREMENT PHOTOS: ...................................................................................... 18 6. RADIATED EMISSION TEST .................................................................................. 19 6.1 MEASUREMENT PROCEDURE..................................................................................................... 19 6.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION)............................................................... 19 6.3 MEASUREMENT EQUIPMENT USED: ............................................................................................ 20 6.4 MEASUREMENT RESULT............................................................................................................. 21 6.5 RADIATED MEASUREMENT PHOTOS:........................................................................................... 27 7. CHANNEL SEPARATION TEST ............................................................................. 28 7.1 MEASUREMENT PROCEDURE..................................................................................................... 28 7.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION)............................................................... 28 7.3 MEASUREMENT EQUIPMENT USED: ............................................................................................ 28 7.4 MEASUREMENT RESULTS:.......................................................................................................... 28 8. 20DB BANDWIDTH TEST .......…

Text truncated - open the document above for the full version.

Setup Photos