2ABRU-WF3235BDE Dual-Band WiFi MCU Module

BDE Dual-Band WiFi MCU Module Datasheet [email protected] BDE Technology Inc. BDE-WF3235 1 / 77 General Description The BDE-WF3235 module, is a 802.11abgn, IPv4 & IPv6 Low Energy module based on CC3235S/CC3235SF SoC. The module offers a unique combination of lower power, integration of all external components including dual band Ceramic Antenna at a very affordable cost. Created for IoT , the BDE-WF3235 module is a wireless module that integrates two physically separated on-chip MCUs, application processor and network processor. The BDE-WF3235 module is supported by easy to work with software to lower the threshold of using Wi-Fi technology or speeding up design time significantly. The combination of affordable cost, lowest power and ease of use makes it an ideal product for the mass market, including the makers community. Key Features  Fully integrated and green and RoHS modules include all required clocks, SPI flash, and passives  802.11a/b/g/n: 2.4 GHz and 5 GHz  FIPS 140-2 Level 1 validated IC inside  Multilayered security features help developers protect identities, data, and software IP  Low-power modes for battery-powered applications  Coexistence with 2.4-GHz radios  Industrial temperature: –40°C to +85°C  BDE-WF3235 module includes a Ceramic Antenna for easy integration into the host system  1.27-mm pitch QFM package for easy assembly and low-cost PCB design  Transferrable Wi-Fi Alliance® certification  Application microcontroller subsystem:  Arm® Cortex®-M4 core at 80 MHz  User-dedicated memory: • 256KB of RAM • Optional 1MB of executable flash  Rich set of peripherals and timers: • McASP supports two I2S channels • SD, SPI, I2C, UART • 8-bit synchronous imager interface • 4-channel 12-bit ADCs • 4 general-purpose timers (GPT) with 16-bit PWM mode • Watchdog timer • Up to 27 GPIO pins • Debug interfaces: JTAG, cJTAG, SWD  Wi-Fi network processor subsystem:  Wi-Fi® core: • 802.11 a/b/g/n 2.4 GHz and 5 GHz • Modes: – Access point (AP) – Station (STA) – Wi-Fi Direct® (only supported on 2.4GHz) • Security: – WEP – WPA™/ WPA2™ PSK – WPA2 Enterprise – WPA3™ Personal  Internet and application protocols: • HTTPs server, mDNS, DNS-SD, DHCP • IPv4 and IPv6 TCP/IP stack • 16 BSD sockets (fully secured TLS v1.2 and SSL 3.0)  Built-in power management subsystem: • Configurable low-power profiles (always on, intermittently connected, tag) • Advanced low-power modes • Integrated DC/DC regulators  Multilayered security features:  Separate execution environments  Networking security  Device identity and key  Hardware accelerator cryptographic engines(AES, DES, SHA/MD5, CRC)  File system security (encryption, authentication, access control)  Initial secure programming  Software tamper detection  Secure boot  Certificate signing request (CSR)  Unique per device key pair  Application throughput  UDP: 16 Mbps  TCP: 13 Mbps  Power-Management Subsystem:  Integrated DC/DC converters support a wide range of supply voltage: BDE Dual-Band WiFi MCU Module Datasheet [email protected] BDE Technology Inc. BDE-WF3235 2 / 77 • Single wide-voltage supply VBAT: 2.3 V to 3.6 V  Advanced low-power modes: • Shutdown: 1 μA, Hibernate: 5.5 μA • Low-power deep sleep (LPDS): 120 μA • Idle connected (MCU in LPDS): 710 μA • RX traffic (MCU active): 59 mA • TX traffic (MCU active): 223 mA  Wi-Fi TX power • 2.4 GHz: 16 dBm at 1 DSSS • 5 GHz: 15.1 dBm at 6 OFDM  Wi-Fi RX sensitivity • 2.4 GHz: –94.5 dBm at 1 DSSS • 5 GHz: –89 dBm at 6 OFDM  Additional integrated components  40.0-MHz crystal  32.768-kHz crystal (RTC)  32Mbit SPI serial flash  RF filters, diplexer and passive components  Footprint-compatible QFM package  1.27-mm pitch, 63-pin, 23mm × 20.5mm  Module supports the TI SimpleLink Developer's Ecosystem Applications  For Internet of Things applications, such as:  Medical and Healthcare • Multiparameter Patient Monitor • Electrocardiogram (ECG) • Electronic Hospital Bed & Bed Control • Telehealth Systems  Building and Home Automation: • HVAC Systems & Thermostat • Video Surveillance, Video Doorbells, and Low-Power Camera • Building Security Systems and E-locks  Appliances  Asset Tracking  Factory Automation  Grid Infrastructure BDE Dual-Band WiFi MCU Module Datasheet [email protected] BDE Technology Inc. BDE-WF3235 3 / 77 Device Family Table 0-1．BDE-WF3235 Device Family Part Number Core Chip Description Size (mm) Package BDE-WF3235SA32 CC3235S With 32Mbit external flash, with PCB antenna 20.5 × 23 × 2.4 SMD-63 BDE-WF3235SAU32 CC3235S With 32Mbit external flash, with U.FL connector for external antenna 20.5 × 23 × 2.4 SMD-63 BDE-WF3235SN32 CC3235S With 32Mbit external flash, without antenna on module, but can be connected to an external antenna through the application PCB 20.5 × 17.5 × 2.4 SMD-63 BDE-WF3235SFA32 CC3235SF With 32Mbit external flash, with PCB antenna 20.5 × 23 × 2.4 SMD-63 BDE-WF3235SFAU32 CC3235SF With 32Mbit external flash, with U.FL connector for external antenna 20.5 × 23 × 2.4 SMD-63 BDE-WF3235SFN32 CC3235SF With 32Mbit external flash, without antenna, on module, but can be connected to an external antenna through the application PCB 20.5 × 17.5 × 2.4 SMD-63 BDE Dual-Band WiFi MCU Module Datasheet [email protected] BDE Technology Inc. BDE-WF3235 4 / 77 Contents General Description .......................................................................................................................................................... 1 Key Features ...................................................................................................................................................................... 1 Applications ....................................................................................................................................................................... 2 Device Family ...................................................................................................................................................…

Text truncated - open the document above for the full version.

Agent Authorization Company: Guangzhou BDE Technology Inc. Address: B2-403, Chuangyi Building, 162 Science Avenue, Huangpu District, Guangzhou 510663, China Product Name: BDE Dual-Band WiFi MCU Module Model Number(s): BDE-WF3235SFA32, BDE-WF3235SFAU32, BDE-WF3235SFN32, BDE-WF3235SA32, BDE-WF3235SAU32, BDE-WF3235SN32 Product Description: BDE Dual-Band WiFi MCU Module We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Aug. 26, 2022 Name: Jacky Tian Title: General Manager Company: Guangzhou BDE Technology Inc.

Guangzhou BDE Technology Inc. B2-403, Chuangyi Building, 162 Science Avenue, Huangpu District, Guangzhou 510663, China Aug. 26, 2022 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID: 2ABRU-WF3235 Models: BDE-WF3235SFA32, BDE-WF3235SFAU32, BDE- WF3235SFN32, BDE-WF3235SA32, BDE-WF3235SAU32, BDE- WF3235SN32 To Whom It May Concern: We, The Guangzhou BDE Technology Inc. hereby declare that BDE- WF3235SFA32, BDE-WF3235SA32 has a PCB antenna integrated, while BDE- WF3235SFAU32, BDE-WF3235SAU32 has an U.FL connector on board which can be connected to an external antenna, and BDE-WF3235SFN32, BDE-WF3235SN32 has no antenna included but can be connected to an external antenna through the application PCB. In addition, BDE-WF3235SFA32, BDE-WF3235SFAU32, BDE-WF3235SFN32 has on-chip flash integrated, while BDE-WF3235SA32, BDE-WF3235SAU32, BDE-WF3235SN32 has not. Otherwise, they are the same. Except for the different above, no other modification is performed. Sincerely, Guangzhou BDE Technology Inc. Signature: [Jacky Tian, General Manager]

Guangzhou BDE Technology Inc. B2-403, Chuangyi Building, 162 Science Avenue, Huangpu District, Guangzhou 510663, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Aug. 26, 2022 Subject; Request for Confidentiality FCC ID: 2ABRU-WF3235 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List Software Security Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Jacky Tian Title: General Manager

Guangzhou BDE Technology Inc. B2-403, Chuangyi Building, 162 Science Avenue, Huangpu District, Guangzhou 510663, China RE FCC ID: 2ABRU-WF3235 To the certification reviewer: We are hereby applying for [full] modular approval of the above-referenced FCC ID, based on compliance with [all] of the criteria as detailed below. Sincerely, [Jacky Tian] [General Manager] Part 15 Unlicensed Single Modular Transmitter Approval Justification per 15.212 Requirement per 15.212 reference (i) The radio elements of the modular transmitter must have their own RF shielding. Shielding is provided by a metal cover over the circuitry. (ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided. All modulation and data inputs are buffered by circuitry on the transmitter chip. (iii) The modular transmitter must have its own power supply regulation. Power supply regulation is provided by circuitry on the transmitter chip. (iv) The modular transmitter must comply with the antenna and transmission system requirements of §§ 15.203, 15.204(b) and 15.204(c). The antenna is fixed. (v) The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 parameters. Testing was performed in a stand-alone configuration as shown in the test setup photos. (vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. The modular was labeled with its own FCC ID. The outside of device in to which the module is installed will labeled Contains TX FCC ID: 2ABRU- WF3235, Please refer to User Manual. Guangzhou BDE Technology Inc. B2-403, Chuangyi Building, 162 Science Avenue, Huangpu District, Guangzhou 510663, China (vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. The modular is comply with all applicable FCC rules. Any modifications, not expressly approved by the manufacturer could void the authority to operate in these regions. (viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. This module operates under Part 15.247 and Part 15.407which is exempt from RF exposure evaluation owing to the very low operating power.

Report No.: AGC02390220401AP03 Page 1 of 6 EXTERNAL PHOTOS ALL VIEW-1 OF EUT ALL VIEW-2 OF EUT Antenna 2 Report No.: AGC02390220401AP03 Page 2 of 6 Model: BDE-WF3235SFA32 TOP VIEW OF EUT Model: BDE-WF3235SA32 TOP VIEW OF EUT Antenna 1 Report No.: AGC02390220401AP03 Page 3 of 6 Model: BDE-WF3235SN32 TOP VIEW OF EUT Model: BDE-WF3235SFN32 TOP VIEW OF EUT Report No.: AGC02390220401AP03 Page 4 of 6 Model: BDE-WF3235SAU32 ALL VIEW-1 OF EUT TOP VIEW OF EUT Report No.: AGC02390220401AP03 Page 5 of 6 Model: BDE-WF3235SFAU32 ALL VIEW-1 OF EUT TOP VIEW OF EUT Report No.: AGC02390220401AP03 Page 6 of 6 ****************************************End of Report****************************************

FCC ID and IC Label Location 10mm*10mm 10mm*10mm 10mm*10mm 10mm*10mm 10mm*10mm 10mm*10mm

Report No.: AGC02390220301AP03 Page 1 of 9 INTERNAL PHOTOS Model: BDE-WF3235SFA32 INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC02390220301AP03 Page 2 of 9 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC02390220301AP03 Page 3 of 9 Model: BDE-WF3235SA32 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) Report No.: AGC02390220301AP03 Page 4 of 9 INTERNAL VIEW OF EUT (FIGURE 3) Model: BDE-WF3235SN32 INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC02390220301AP03 Page 5 of 9 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC02390220301AP03 Page 6 of 9 Model: BDE-WF3235SFN32 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) Report No.: AGC02390220301AP03 Page 7 of 9 Model: BDE-WF3235SAU32 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) Report No.: AGC02390220301AP03 Page 8 of 9 INTERNAL VIEW OF EUT (FIGURE 3) Model: BDE-WF3235SFAU32 INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC02390220301AP03 Page 9 of 9 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) ****************************************End of Report****************************************

RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION Product Description BDE Dual-Band WiFi MCU Module Model Name BDE-WF3235SFA32, BDE-WF3235SFAU32, BDE-WF3235SFN32, BDE-WF3235SA32, BDE-WF3235SAU32, BDE-WF3235SN32 FCC ID 2ABRU-WF3235 2. EVALUATION METHOD AND LIMIT Human exposure to RF emissions from mobile devices (47 CFR §2.1091) may be evaluated based on the MPE limits adopted by the FCC for electric and magnetic field strength and/or power density, as appropriate, since exposures are assumed to occur at distances of 20 cm or more from persons. LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE Frequency Range (MHz) E-field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Time |E| 2 , |H| 2 or S (Minutes) 0.3 -- 1.34 614 1.63 (100)* 30 1.34 -- 30 824/f 2.19/f (180/f 2 )* 30 30 -- 300 27.5 0.073 0.2 30 300 -- 1500 -- -- f/1500 30 1500 -- 100,000 -- -- 1.0 30 *Note: 1. f= Frequency in MHz * Plane-wave Equivalent Power Density 2. The averaging time for General Population/Uncontrolled exposure to fixed transmitters is not applicable for mobile and portable transmitters. See 47 CFR §§2.1091 and 2.1093 on source-based time-averaging requirement for mobile and portable transmitters. S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna CALCULATION A minimum test separation distance ≥ 20 cm is required between the antenna and radiating structures of the device and nearby persons to apply mobile device exposure limits. The distance must be at least 20 cm and fully supported by the operating and installation configurations of the transmitter and its antenna(s), according to the source-based time-averaged maximum power requirements of § 2.1091(d)(2). In cases where cable losses or other attenuations are applied to determine compliance, the most conservative operating configurations and exposure conditions must be evaluated. 2.4G WIFI: Antenna Gain=2.484dBi (Numeric 1.77), π=3.14 5G WIFI: Antenna Gain=2.50dBi (Numeric 1.78), π=3.14 Note: 2.4GHz WIFI and 5GHz band can not transmit simultaneously. Note: 1. Only the worst case recorded. Frequency Output Power Output Power Power Density Power Density Limit MHz dBm mW mW/cm 2 mW/cm 2 2412 12.81 19.10 0.0067 1 Frequency Output Power Output Power Power Density Power Density Limit MHz dBm mW mW/cm 2 mW/cm 2 5600 9.54 8.99 0.0032 1

Page 1 of 105 Report No.: AGC02390220401FE05 FCC ID : 2ABRU-WF3235 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : BDE Dual-Band WiFi MCU Module BRAND NAME : BDE MODEL NAME : BDE-WF3235SFA32, BDE-WF3235SFAU32, BDE-WF3235SFN32, BDE-WF3235SA32, BDE-WF3235SAU32, BDE-WF3235SN32 APPLICANT : Guangzhou BDE Technology Inc. DATE OF ISSUE : Aug. 26, 2022 STANDARD(S) TEST PROCEDURE(S) : FCC Part 15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd FCC Test Report Report No.: AGC02390220401FE05 Page 2 of 105 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Aug. 26, 2022 Valid Initial Release Report No.: AGC02390220401FE05 Page 3 of 105 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY .................................................................................................................. 5 2. GENERAL INFORMATION .............................................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 6 2.2. TABLE OF CARRIER FREQUENCYS ....................................................................................................... 7 2.3. IEEE 802.11N MODULATION SCHEME .................................................................................................... 8 2.4. RELATED SUBMITTAL(S) / GRANT (S) .................................................................................................... 8 2.5. TEST METHODOLOGY ............................................................................................................................. 8 2.6. SPECIAL ACCESSORIES ......................................................................................................................... 8 2.7. EQUIPMENT MODIFICATIONS ................................................................................................................. 8 2.8. ANTENNA REQUIREMENT....................................................................................................................... 9 3. MEASUREMENT UNCERTAINTY ................................................................................................................. 11 4. DESCRIPTION OF TEST MODES ................................................................................................................. 12 5. SYSTEM TEST CONFIGURATION ................................................................................................................ 13 5.1. CONFIGURATION OF EUT SYSTEM ...................................................................................................... 13 5.2. EQUIPMENT USED IN EUT SYSTEM ..................................................................................................... 13 5.3. SUMMARY OF TEST RESULTS .............................................................................................................. 13 6. TEST FACILITY .............................................................................................................................................. 14 7. OUTPUT POWER ........................................................................................................................................... 15 7.1. MEASUREMENT PROCEDURE ............................................................................................................. 15 7.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 15 7.3. LIMITS AND MEASUREMENT RESULT .................................................................................................. 16 8. BANDWIDTH .................................................................................................................................................. 17 8.1. MEASUREMENT PROCEDURE ............................................................................................................. 17 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 17 8.3. LIMITS AND MEASUREMENT RESULTS ............................................................................................... 18 9. CONDUCTED SPURIOUS EMISSION........................................................................................................... 29 9.1. MEASUREMENT PROCEDURE ............................................................................................................. 29 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 29 9.3. MEASUREMENT EQUIPMENT USEDJN ................................................................................................ 29 9.4. LIMITS AND MEASUREMENT RESULT .................................................................................................. 29 Report No.: AGC02390220401FE05 Page 4 of 105 10. MAXIMUM CONDUCTED OUTPUT POWER SPECTRAL DENSITY ........................................................ 41 10.1 MEASUREMENT PROCEDURE ............................................................................................................ 41 10.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................... 41 10.3 MEASUREMENT EQUIPMENT USED ................................................................................................... 41 10.4 LIMITS AND MEASUREMENT RESULT ................................................................................................. 41 11. RADIATED EMISSION ................................................................................................................................. 47 11.1. MEASUREMENT PROCEDURE............................................................................................................ 47 11.2. TEST SETUP ..…

Text truncated - open the document above for the full version.

Report No.: AGC02390220401FE05 Page 68 of 105 EUT BDE Dual-Band WiFi MCU Module Model Name BDE-WF3235SFA32 Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with data rate 1 2462MHz Antenna Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC02390220401FE05 Page 69 of 105 EUT BDE Dual-Band WiFi MCU Module Model Name BDE-WF3235SFA32 Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11g with data rate 6 2412MHz Antenna Horizontal Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC02390220401FE05 Page 70 of 105 EUT BDE Dual-Band WiFi MCU Module Model Name BDE-WF3235SFA32 Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11g with data rate 6 2412MHz Antenna Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC02390220401FE05 Page 71 of 105 EUT BDE Dual-Band WiFi MCU Module Model Name BDE-WF3235SFA32 Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11g with data rate 6 2462MHz Antenna Horizontal Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC02390220401FE05 Page 72 of 105 EUT BDE Dual-Band WiFi MCU Module Model Name BDE-WF3235SFA32 Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11g with data rate 6 2462MHz Antenna Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC02390220401FE05 Page 73 of 105 EUT BDE Dual-Band WiFi MCU Module Model Name BDE-WF3235SFA32 Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11n20 with data rate 6.5 2412MHz Antenna Horizontal Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC02390220401FE05 Page 74 of 105 EUT BDE Dual-Band WiFi MCU Module Model Name BDE-WF3235SFA32 Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11n20 with data rate 6.5 2412MHz Antenna Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC02390220401FE05 Page 75 of 105 EUT BDE Dual-Band WiFi MCU Module Model Name BDE-WF3235SFA32 Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11n20 with data rate 6.5 2462MHz Antenna Horizontal Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC02390220401FE05 Page 76 of 105 EUT BDE Dual-Band WiFi MCU Module Model Name BDE-WF3235SFA32 Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11n20 with data rate 6.5 2462MHz Antenna Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC02390220401FE05 Page 77 of 105 Antenna 2: Whip antenna: EUT BDE Dual-Band WiFi MCU Module Model Name BDE-WF3235SFAU32 Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with data rate 1 2412MHz Antenna Horizontal Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC02390220401FE05 Page 78 of 105 EUT BDE Dual-Band WiFi MCU Module Model Name BDE-WF3235SFAU32 Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with data rate 1 2412MHz Antenna Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC02390220401FE05 Page 79 of 105 EUT BDE Dual-Band WiFi MCU Module Model Name BDE-WF3235SFAU32 Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with data rate 1 2462MHz Antenna Horizontal Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC02390220401FE05 Page 80 of 105 EUT BDE Dual-Band WiFi MCU Module Model Name BDE-WF3235SFAU32 Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with data rate 1 2462MHz Antenna Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC02390220401FE05 Page 81 of 105 EUT BDE Dual-Band WiFi MCU Module Model Name BDE-WF3235SFAU32 Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11g with data rate 6 2412MHz Antenna Horizontal Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC02390220401FE05 Page 82 of 105 EUT BDE Dual-Band WiFi MCU Module Model Name BDE-WF3235SFAU32 Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11g with data rate 6 2412MHz Antenna Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC02390220401FE05 Page 83 of 105 EUT BDE Dual-Band WiFi MCU Module Model Name BDE-WF3235SFAU32 Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11g with data rate 6 2462MHz Antenna Horizontal Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC02390220401FE05 Page 84 of 105 EUT BDE Dual-Band WiFi MCU Module Model Name BDE-WF3235SFAU32 Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11g with data rate 6 2462MHz Antenna Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC02390220401FE05 Page 85 of 105 EUT BDE Dual-Band WiFi MCU Module Model Name BDE-WF3235SFAU32 Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11n20 with data rate 6.5 2412MHz Antenna Horizontal Test Graph for Peak Measurement Test Graph for Average Measurement R…

Text truncated - open the document above for the full version.

Ethertronics’ series of Ceramic Isolated Magnetic Dipole™ (IMD) antennas deliver on the key needs of device designers for higher functionality and performance in smaller/thinner designs. These innovative antennas provide compelling advantages for a full WIFI dual band enabled handheld devices, media players and other mobile devices. Real-World Performance and Implementation Ceramic antennas may look alike on the outside, but the important difference is inside. Other antennas may contain simple PIFAor monopole designs that interact with their surroundings, complicating layout or changing performance with use position. Ethertronics’ antennas utilize patented IMD technology to deliver a unique size and performance combination. Greater Flexibility Ethertronics’ first…

Text truncated - open the document above for the full version.