2ABXDQBS630-BOUBluetooth Speaker

User Guide Bluetooth Speaker Model: QBS630-BOU 2 I. Introduction Welcome to your new BIuetooth Speaker. We hope you using it as much as we do. Before using your product, we strongly encourage you to fully read through this user guide. This guide will help you operate your new wireless speaker with Bluetooth®. Please also familiarize yourself with the Bluetooth func- tions of your mobile phone and/or other devices. Last, remember to follow the safety guidelines at all times. For best performance, charge fully before first use. II. What’s Inside 1 x BIuetooth Speaker 1 x USB Cable (micro USB) 1 x 3.5mm line-in cable 1 x User Guide enjoy 3 III. Unit at a Glance 1. Increase volume / Next track 2. Pair / Play / Pause / Call 3. Decrease volume / Previous track 4. NFC 5. Micro USB port 6. Power button 7. Indicator light 8. Microphone 9. AUX input 4 IV. Usage A. CHARGING YOUR DEVICE The BIuetooth Speaker offers convenient charging via a micro USB port. For best sound quality, you must charge the product fully before using it for the first time. Steps: 1. Find the USB cable included with this product. 2. Connect the micro connector to the speaker’s micro USB port. 3. Connect the other end to your computer’s USB port. Make sure your computer is turned on. (You may also connect the cable to a USB power adapter for charging with an electrical outlet. ) IMPORTANT: Use only a USB power adapter with a rated output that matches the speaker power input (DC 5V, 500mA). 4. When charging, the indicator light by the power button will turn red. 5. When fully charged, the indicator light will turn off. B. PAIRING DEVICES To use your Bluetooth® speaker, you must first pair it with a Bluetooth enabled device, such as a smartphone or a computer. Once paired, the speaker will automatically rec- ognize and connect to the Bluetooth device in the future. 5 Steps: 1. Make sure the speaker is charged. Turn on the speaker. 2. The indicator light by the power button will flash red and blue rapidly. The speaker is in pairing mode. (If nec- essary, hold the Play/Call button on top of the speaker until the indicator light starts to flash red and blue). 3. Turn on your Bluetooth device and ensure its Bluetooth function is activated. You will find this option on most devices under Settings or Options. 4. Follow your device’s instructions to search for Blue- tooth devices. After a few seconds, your Bluetooth device will list the speaker as a discovered device. The speaker ID is “BOUNDLESS S3”. 5. Select the Boundless S3 to pair the two devices. If asked for a passcode, enter “0000”. 6. A tone will sound and the indicator light will flash blue intermittently. Your Bluetooth enabled device has been successfully connected. C. PAIRING DEVICES USING NFC If you have an NFC enabled device, you can take advan- tage of the Bfluetooth speaker’s NFC function for easier and quicker pairing. NFC lets you pair devices almost instanta- neously by simply tapping them together. 1. Make sure the speaker is charged. Turn on the speaker. 2. The indicator light by the power button will flash red and blue rapidly. The speaker is in pairing mode. 3. Turn on your device and ensure its Bluetooth and NFC 6 functions are active. You will find these options on most devices under Settings or Options. 4. Briefly hold your device against the NFC logo on the side of the speaker. Accept the request when your device asks if you want to pair with the B uetooth speaker. 5. A tone will sound and the indicator light will flash blue intermittently. Your Bluetooth enabled device has been successfully connected. D. PLAYING AUDIO AND TAKING CALLS Select the application on your Bluetooth device that you want to use with the speaker, and press play from that application. Once the speaker is playing, you may press the Play/Call button on top of the speaker to pause and resume audio. To answer an incoming call, press the same Play/Call but- ton. Press again to end the call. The speaker will resume playing. E. CHANGING SONGS AND ADJUSTING THE VOLUME To change songs, press the “-” or “+” button once. To increase or decrease the volume, hold the “-” or “+” but- ton for several seconds. 7 F. AUX INPUT In addition to playing audio via Bluetooth, this product also supports AUX input. To use, connect a 3.5mm line-in cable from the speaker to any device with an audio output (headphone) jack. The speaker will automatically start playing audio from the connected device. To stop using the AUX input, simply disconnect the cable. V. Safety Guidelines Please follow the safety guidelines below at all times when operating or caring for your device. • Listen to music at a proper volume to avoid hurting your hearing and the speakers. • Do not connect an external amplifier to the AUX input. • Avoid storage in high temperatures, such as in a hot vehicle or in direct sunlight. • Do not expose the speaker or any of its supplied parts to rain or other liquids. • Do not drop or cause undue impact to the speaker. • Do not modify, repair, or dismantle the product on your own. 8 VI. Specifications Model number: QBS630-BOU Bluetooth version: v4.0 Range: 10 m (approx. 33 ft.) Frequency range: 100 Hz – 18 KHz Signal-to-noise: ≥ 85 dB Driver: 40 mm Sampling frequency: 8 KHz – 48 KHz Rating power: RMS 6 W (3 W x 2) Battery: 3.7V, 600 mAh * 2 Input voltage: DC 5 V, 800 mA Playing mode: Bluetooth/AUX Size (L x W x H) 6.1 x 0.9 x 2.3 in (156 x 24 x 58 mm) Weight 9.2 oz (260 g) VII. Support If your device is not functioning correctly, please visit www.GetIconQ.com/pages/productsupport for customer support, and we will be more than happy to help you. VIII. Limited Warranty For more information and instructions on how to get war- ranty service, visit www.GetIconQ.com/pages/warranty. 9 FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference receiv…

Text truncated - open the document above for the full version.

ICON Q CORPORATION Add: 1225 Franklin Ave Suite 325, Garden City, NY 11530, USA Tel: (516) 277-1277 Fax: / 2014-07-17 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID: 2ABXDQBS630-BOU We hereby request confidential treatment of information accompanying this application as outlined below: - Schematics Diagram - Block Diagram - Operation description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s name / title : Ray Lee / Manager Contact information / address : 1225 Franklin Ave Suite 325, Garden City, NY 11530, USA Tel: (516) 277-1277 Fax: / E-Mail: [email protected]

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ABXDQBS630-BOU Report No.: LCS1407140489E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 3 1. EXTERIOR PHOTOGRAPHS Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ABXDQBS630-BOU Report No.: LCS1407140489E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 3 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ABXDQBS630-BOU Report No.: LCS1407140489E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 3 Fig.5 Fig.6

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ABXDQBS630-BOU Report No.: LCS1407140489E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 LABEL AND LOCATION Material: Tagboard Glue: adhesive sticker Font color: White Label color: Black Label And Location

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ABXDQBS630-BOU Report No.: LCS1407140489E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 5 1. INTERIOR PHOTOGRAPHS Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ABXDQBS630-BOU Report No.: LCS1407140489E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 5 Fig.3 Fig.4 Bluetooth Antenna NFC Antenna SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ABXDQBS630-BOU Report No.: LCS1407140489E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 5 Fig.5 Fig.6 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ABXDQBS630-BOU Report No.: LCS1407140489E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 5 Fig.7 Fig.8 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ABXDQBS630-BOU Report No.: LCS1407140489E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 5 of 5 Fig.9 Fig.10

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ABXDQBS630-BOU Report No.: LCS1407140489E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 43 FCC TEST REPORT FOR ICON Q CORPORATION Bluetooth Speaker Test Model: QBS630-BOU Prepared for : ICON Q CORPORATION Address : 1225 Franklin Ave Suite 325, Garden City, NY 11530, USA Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 1/F., Xingyuan Industrial Park, Tongda Road, Bao'an Avenue, Bao'an District, Shenzhen, Guangdong, China Date of receipt of test sample : July 14, 2014 Number of tested samples : 1 Serial number : Prototype Date of Test : July 14, 2014 - July 17, 2014 Date of Report : July 17, 2014 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ABXDQBS630-BOU Report No.: LCS1407140489E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 43 FCC TEST REPORT FCC CFR 47 PART 15 C(15.247): 2013 / RSS-210 Issue 8 / RSS-Gen Issue 3 Report Reference No. .............. : LCS1407140489E Date of Issue ................................ : July 17, 2014 Testing Laboratory Name ......... : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ........................................ : 1/F., Xingyuan Industrial Park, Tongda Road, Bao'an Avenue, Bao'an District, Shenzhen, Guangdong, China Testing Location/ Procedure ........ : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name....................... : ICON Q CORPORATION Address ........................................ : 1225 Franklin Ave Suite 325, Garden City, NY 11530, USA Test Specification Standard ....................................... : FCC CFR 47 PART 15 C(15.247): 2013 / RSS-210 Issue 8 / RSS-Gen Issue 3 Test Report Form No. .................. : LCSEMC-1.0 TRF Originator ............................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF .................................. : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. ............... : Bluetooth Speaker Trade Mark .................................. : Model/ Type reference ................. : QBS630-BOU Ratings ......................................... : DC 3.7V by battery(1200mAh) Recharge Voltage: DC 5V/800mA Result ........................................ : Positive Compiled by: Supervised by: Approved by: Leo Lee/ File administrators Danny Huang/ Technique principal Gavin Liang/ Manager SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ABXDQBS630-BOU Report No.: LCS1407140489E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 43 FCC -- TEST REPORT Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS1407140489E July 17, 2014 Date of issue Type / Model........................... : QBS630-BOU EUT......................................... : Bluetooth Speaker Applicant............................... : ICON Q CORPORATION Address.................................. : 1225 Franklin Ave Suite 325, Garden City, NY 11530, USA Telephone............................... : / Fax.......................................... : / Manufacturer........................ : SHENZHEN J.Y.M ELECTRONICS CO., LTD(USA) Address................................... : No. 98, Zhentou Rd, Shajing Town, Bao'an District, Shenzhen, China Telephone............................... : / Fax.......................................... : / Factory................................... : SHENZHEN J.Y.M ELECTRONICS CO., LTD(USA) Address................................... : No. 98, Zhentou Rd, Shajing Town, Bao'an District, Shenzhen, China Telephone............................... : / Fax.......................................... : / SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ABXDQBS630-BOU Report No.: LCS1407140489E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 43 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION ................................................................................................ 5 1.1 Description of Device (EUT) ........................................................................................................... 5 1.2 Support equipment List .................................................................................................................... 6 1.3 External I/O ..................................................................................................................................... 6 1.4 Description of Test Facility ............................................................................................................. 6 1.5 Statement of The Measurement Uncertainty ................................................................................... 7 1.6 Measurement Uncertainty ................................................................................................................ 7 1.7 Description Of Test Modes .............................................................................................................. 8 2. TEST METHODOLOGY .........…

Text truncated - open the document above for the full version.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ABXDQBS630-BOU Report No.: LCS1407140489E _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 2 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement (X Position) Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ABXDQBS630-BOU Report No.: LCS1407140489E _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 2 1.2. Photo of Line Conducted Emissions Measurement