2ABY9OMNIA-A1PLUSApple Watch Magnetic Wireless fast charger

WatchChargerInstruction AppleWatchchargercanbepoweredfromaUBSCPDcharger, tabletortype-Claptopsandsoon,tochargetheAppleWatchSeries models:AppleWatchUltra,AppleWatchSeries8,AppleWatchSE, AppleWatchSeries7,AppleWatchSeries6,AppleWatchSE(1st generation),AppleWatchSeries5,AppleWatchSeries4,Apple WatchSeries3,AppleWatchSeries2,AppleWatchSeries1,Apple Watch(1stgeneration).IntegratedMFi-certifiedAppleWatchCharger ModuleC962 ThedeviceispoweredbyaUSB-CchargerandusedforApple Watch.WhenAppleWatchplaced,watchchargerbecauseofthe magneticforcedirectlyup,automaticandapplewatchmagneticring alignmentandfirmadsorption,sothatwatchchargerachieve charging.Pleaserefertothefollowingillustration. Size:53mmx40mmx14.8mm Recommendedpoweradapterspecifications ： .USB-COutputPort .DC5V1Aorhigher FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the follow ing two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, inc luding interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentia l installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televis ion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technic ian for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be insta lled and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

AdamElementsInternationalCo.,LTD. ModelDifference Productdescription:AppleWatchMagneticWirelessfastcharger Modelname:OMNIAA1+ APAADA1PWH TradeName:N/A FCCID:2ABY9OMNIA-A1PLUS AllthemodelarethesamecircuitandRFmodule,onlyformodelname. Regards Sincerely Client’ssignature: Client’sname/title:AlanChang(N/A) Contactinformation/address:10F.-3,No.54,SongjiangRd.,ZhongshanDist.,

C5266091_X8_Ed.1 1/1 LetterofAuthorization <AdamElementsInternationalCo.,LTD.> Company:AdamElementsInternationalCo.,LTD. Address:10F.-3,No.54,SongjiangRd.,ZhongshanDist., ProductName:AppleWatchMagneticWirelessfastcharger ModelNumber:OMNIAA1+ APAADA1PWH FCCIdentifier:2ABY9OMNIA-A1PLUS WeauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdelCarme,s/n, 08193Bellaterra,Spain,toactonourbehalfonallmattersconcerningthe abovenamedequipment. AnyindividualwithinLGAITechnologicalCenterS.A.isauthorizedtoactonour behalfandtakeactionontheapplication. WedeclarethatauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdel Carme,s/n,08193Bellaterra,Spain,isallowedtoforwardallinformation relatedtotheapprovalprojecttotheFederalCommunicationCommissionand todiscussanyissuesconcerningtheapprovalapplication.Anyandallacts carriedoutbyLGAITechnologicalCenterS.A.onourbehalfshallhavethe sameeffectasactsofourown. Name:AlanChangDate:2022-12-28 Title:N/A Signatureofapplicant:

C5266091_X10_Ed.1 1/1 <AdamElementsInternationalCo.,LTD.> OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 Date:2022-12-28 Subject:RequestforConfidentiality FCCID:2ABY9OMNIA-A1PLUS ToWhomItMayConcern, PursuanttotheprovisionsofSections0.457and0.459ofCommission'srules (47CFR0.457,0.459),wearerequestingtheCommissiontowithholdthefollowing attachment(s)asconfidentialdocumentfrompublicdisclosure. ExhibitsLong-Term Confidentiality Short-Term Confidentiality IDLabel/LocationNoNo AttestationStatementNoNo ExternalPhotosNo BlockDiagram Schematics TestReportNoNo TestSetupPhotosNo User’sManual InternalPhotos PartsList/TuneUp RFExposureInfo OperationalDescription CoverLetter(s)NoNo SDRSoftware/SecurityInfoNo Abovementioneddocumentcontainsdetailedsystemandequipmentdescriptionare consideredasproprietaryinformationinoperationoftheequipment.Thepublic disclosureofabovedocumentsmightbeharmfultoourcompanyandwouldgive competitoranunfairadvantageinthemarket. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondentduringcertificationreviewprocesscannotbegrantedasconfidential documentsandthoseinformationwillbeavailableforpublicreviewoncethegrantof equipmentauthorizationisissued. Sincerely, Signature: Name: AlanChang Title:N/A

EUTPHOTO(ExternalPhotos) ※※※※※ENDOFREPORT※※※※※

Labelandlabellocation AppleWatchMagneticWireless fastcharger FCCID:2ABY9OMNIA-A1PLUS

EUTPHOTO(InternalPhotos) ANT ※※※※※ENDOFREPORT※※※※※

FCC ID: 2ABY9OMNIA-A1PLUS Product Name: Apple Watch Fast Charger Product Model No.: OMNIA A1+ APAADA1PWH Test Auxiliary: Apple Watch Model No.: Apple Transmitting mode Keep the EUT in continuously wireless charging mode Power supply: Input: DC 5V 1A Wireless Output : 3W Test description: Phone Battery>98%, =50%and <1% are tested, and the worst is <1%. Test Auxiliary A1 Adapter HUAWEI ZKT-002 N/A Auxiliary A8 Apple Watch Apple ZKT-008 N/A Auxiliary Transmitting mode Keep the EUT in continuously wireless charging mode Test Modes: Mode 1 AC/DC Adapter (5V/1A) + EUT + Apple Watch (3W) Record N/A RF Exposure Evaluation 1 Measuring Standard KDB 680106 RF Exposure Wireless Charging Apps v03r01 1.1 KDB 680106 RF Exposure Wireless Charging Apps v03r01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainly 1 H-filed ±0.93dB 2 E-filed ±0.51dB 2 Requirements According to the item 5 of KDB 680106 v03r01: Inductive wireless power transfer applications that meet all of the following requirements are excluded from submitting an RF exposure evaluation. (1) Power transfer frequency is less than 1MHz. (2) Output power from each primary coil is less than or equal to 15 watts. (3) The system may consist of more than one source primary coils, charging one or more clients. If more than one primary coil is present, the coil pairs may be powered on at the same time. (4) Client device is placed directly in contact with the transmitter. (5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). (6) The aggregate H-field strengths anywhere at or beyond 15 cm surrounding the device, and 20 cm away from the surface from all coils that by design can simultaneously transmit, and while those coils are simultaneously energized, are demonstrated to be less than 50% of the applicable MPE limit. Remark: Meet all the above requirements. Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) 3 Test Setup 4 Test Procedure 1) The RF exposure test was performed in anechoic chamber. 2) The measurement probe was placed at test distance (15 cm from all sides and 20 cm from the top) which is between the edge of the charger and the geometric center of probe. 3) The highest emission level was recorded and compared with limit as soon as measurement of each points (A, B, C, D, E) were completed. 4) The EUT was measured according to the dictates of KDB 680106 v03r01. Remark：The EUT’s test position A, B, C, D and E is valid for the E and H field measurements. 5 Test Instruments list Test Equipment Manufacturer Model No. SN. Cal.Date (mm-dd-yy) Cal.Due date (mm-dd-yy) Exposure Level Tester Narda ELT-400 N-0231 June. 26 2022 June. 25 2023 Magnetic field probe 100cm 2 Narda ELT probe 100cm 2 M0675 June. 26 2022 June. 25 2023 Isotropic Electric field probe Narda EP-601 611WX70332June. 26 2022 June. 25 2023 6 Test Result E-Filed Strength at 15 cm from the edges surrounding the EUT (V/m) Frequency Range (MHz) Test Position A Test Position B Test Position C Test Position D Limits (V/m) 0.115-0.360 0.76 0.74 0.75 0.74 614 E-Filed Strength at 20 cm from the top of the EUT (V/m) Frequency Range (MHz) Test Position E Limits (V/m) 0.115-0.360 0.75 614 H-Filed Strength at 15 cm from the edges surrounding the EUT (A/m) Frequency Range (MHz) Test Position A Test Position B Test Position C Test Position D Limits (A/m) 0.115-0.360 0.16 0.14 0.14 0.15 1.63 H-Filed Strength at 20 cm from the top of the EUT (A/m) Frequency Range (MHz) Test Position E Limits (A/m) 0.115-0.360 0.15 1.64 7 Test Set-up Photo

承 认 书 客户名称（CUSTOMER): 充 向 未 来 科 技 有 限 公 司 客户料号（CUSTOMER P/N）:0001.DZ.0010.011 品名（DESCRIPTION) : DATE:2022-8-29 规格（SPECIFICATION) ：手表线圈软磁-6.7uH REV.NO.:A0 鸿日昇威科技承认签核、盖章 部门确认/日期审核/日期批准/日期 (盖公司公 章) 品质董晚红 2022-8-29 吕惠 2022-8-29 韦函满 2022-8-29 工程何伟华 2022-8-29 韦立红 2022-8-29 韦立红 2022-8-29 备注： 充向未来科技承认签核、盖章 部门确认/日期审核/日期批准/日期 (盖公司公 章) 开发工程 采购 品质 备注： 深 圳 市 鸿 日 昇 威 科 技 有 限 公 司 HRSW ELECTRONICS CO.,LTD ADD：深圳市龙华新区观澜环观中路48号1栋2楼 TEL：+86-755-23461055 FAX：+86-0755-28015170 page:1/3 ROHS SPECIFICATION FOR APPROVAL 1.MECHANICAL DIMENSION (UNIT:mm) 2.SCHEMATICS: A B C D FG 20±2 14±1 2.7±0.5 15±2 4±225±2 3.WINDING： 1底1 STE P START-FINISHWIRE TYPETURNSTAPE REMAR K N1S-F⌀0.08*24mm 2UEW12TS (Ref) 4.ELECTRICAL SPECIFICATION: ITEMLDCRIDCQ值HI-POT TES T CON S-F S-FS-F 100KHz,0.25V AT 25°CAT 25°C SPEC6.7uH±10% 40mΩ(Max)3A 5.BILF OF MATERIAL： NO.ITEMMATERIAL SPECIFICATIONMANUFACTURER SGS NO. 1 磁芯 UG25软磁NANJINGJINNINGCO,LTD 2 磁铁N52 7.8*2.2 NANJINGJINNINGCO,LTD 3铜 线⌀0.08mm*24 2UEWTAIYI CO.,LTD 4 背胶23单面背胶 HONGBAOJEICO,LTD 5 无铅锡条无铅锡条 QIANDAO CO.,LTD 6 胶水 9999CUDAK CO.,LTD 鸿日昇威科技有限公司 PART NO TITLE 手表线圈软磁-6.7uH DRAWN BYCHECKED BY APPROVED BY 谢超何伟华韦立红 page:2/3 SPECIFICATION FOR APPROVAL 6.SAMPLE TEST DATA 6.1DIMENSION TEST(UNIT:mm) TEST ITEMABCDFG 20±2 14±12.7±0.515±2 4±224±2 1 20.0813.952.7415.2 3.25 24.30 2 21.03514.022.7114.9 3.34 24.60 3 21.0413.982.6815 4.02 24.80 4 21.03142.6715.02 3.98 25.00 5 20.9814.052.6914.89 3.89 25.37 MAX21.04 14.05 2.74 15.20 4.02 25.37 MIN20.08 13.95 2.67 14.89 3.25 24.30 AVERAGE 20.76 14.00 2.70 15.01 3.68 24.82 6.2ELECTRICAL TEST TEST ITEM LDCRIDC QHI-POT S-FS-F TEST COND100KHz/0.25vAT 25°C SPEC 6.7uH ±10% 40mΩ (Max) 16.71 21.00 26.98 20.00 36.72 21.50 46.70 20.30 56.98 20.40 6 MAX6.98 21.50 MIN6.70 20.00 AVERAGE6.84 20.75 鸿日昇威科技有限公司 PART NO TITLE 手表线圈软磁- 6.7uH DRAWN BYCHECKED BYAPPROVED BY 谢超何伟华韦立红

ProjectNo.:ZKT-2212069116E Page 1 of 22 FCCTESTREPORT FCCID:2ABY9OMNIA-A1PLUS ReportNumber. .................................. :ZKT-2212069116E DateofTest ............................................. .......... : Dec.01,2022toDec.29,2022 Dateofissue.........................................: Dec.29,2022 Totalnumberofpages..........................22 TestResult .......................................... : PASS TestingLaboratory............................: ShenzhenZKTTechnologyCo.,Ltd. Address ............................................... : 1/F,No.101,BuildingB,No.6,TangweiCommunityIndustrial Avenue,FuhaiStreet,Bao'anDistrict,Shenzhen,China Applicant'sname.............................: AdamElementsInternationalCo.,LTD. Address ............................................... : 10F.-3,No.54,SongjiangRd.,ZhongshanDist., Manufacturer'sname......................: AdamElementsInternationalCo.,LTD. Address ............................................... : 10F.-3,No.54,SongjiangRd.,ZhongshanDist., Testspecification: Standard ................................................ :FCCCFRTitle47Part15SubpartC Testprocedure ..................................... : / Non-standardtestmethod................:N/A TestReportFormNo. ....................... : TRF-EL-107_V0 TestReportForm(s)Originator ..... : ZKTTesting MasterTRF ........................................ : Dated:2020-01-06 ThisdevicedescribedabovehasbeentestedbyZKT,andthetestresultsshowthattheequipmentunder test(EUT)isincompliancewiththeFCCrequirements.Anditisapplicableonlytothetestedsample identifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofZKT,thisdocumentmay bealteredorrevisedbyZKT,personalonly,andshallbenotedintherevisionofthedocument. Productname ..................................... : AppleWatchMagneticWirelessfastcharger Trademark ........................................... : N/A Model/Typereference ......................... : OMNIAA1+ APAADA1PWH Ratings..................................................: Input:DC5V1A WirelessOutput:3W ProjectNo.:ZKT-2212069116E Page 2 of 22 Testingprocedureandtestinglocation: TestingLaboratory.......................................:ShenzhenZKTTechnologyCo.,Ltd. Address............................................................:1/F,No.101,BuildingB,No.6,TangweiCommunity IndustrialAvenue,FuhaiStreet,Bao'anDistrict, Shenzhen,China AlenHe Testedby(name+signature).......................: JoeLiu Reviewer(name+signature) ....................... : LakeXie Approved(name+signature) ....................... : ProjectNo.:ZKT-2212069116E Page 3 of 22 TABLEOFCONTENTS 1.VERSION.......................................................................................................................................4 2.TESTSUMMARY........................................................................................................................5 2.1TESTFACILITY....................................................................................................................................6 2.2MEASUREMENTUNCERTAINTY....................................................................................................6 3.GENERALINFORMATION......................................................................................................7 3.1GENERALDESCRIPTIONOFEUT..................................................................................................7 3.2Testmode..............................................................................................................................................7 3.3BlockDiagramofEUTConfiguration................................................................................................7 3.4TestConditions.....................................................................................................................................7 3.5DescriptionOfSupportUnits(ConductedMode)............................................................................8 3.6EQUIPMENTSLISTFORALLTESTITEMS..................................................................................9 4.CONDUCTEDEMISSIONTEST..............................................................................................9 4.1CONDUCTEDEMISSIONMEASUREMENT................................................................................10 4.1.1POWERLINECONDUCTEDEMISSIONLimits........................................................................10 4.1.2TESTPROCEDURE.......................................................................................................................10 4.1.3DEVIATIONFROMTESTSTANDARD.......................................................................................10 4.1.4TESTSETUP...................................................................................................................................11 4.1.5EUTOPERATINGCONDITIONS.................................................................................................11 4.1.6TestResult.......................................................................................................................................11 5.RADIATEDEMISSIONMEASUREMENT............................................................................14 5.1RadiatedEmissionLimits..................................................................................................................14 5.2AnechoicChamberTestSetupDiagram........................................................................................15 5.3TestProcedure....................................................................................................................................15 5.4DEVIATIONFROMTESTSTANDARD..........................................................................................15 5.5TestResult...........................................................................................................................................16 6.BANDWIDTHTEST...............................................…

Text truncated - open the document above for the full version.

EUTTESTPHOTO