2ABY9OMNIA-CX2Magnetic Charging Car Mount

Adam Elements International Co., LTD. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – EquipmentType Company name: Adam Elements International Co., LTD. Address: 10F.-3, No.54, Songjiang Rd., Zhongshan Dist., Taipei City, 104 Taiwan Product Name: Magnetic Charging Car Mount FCCID: 2ABY9OMNIA-CX2 Model(s): OMNIA CX2 2.911(d)(5)(i) EquipmentType We, [Adam Elements International Co., LTD.] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Alan Chang Date: May 06, 2023 Signature: Title and Company name: General Manager / Adam Elements International Co., LTD. NOTE 1 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Adam Elements International Co., LTD. 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Adam Elements International Co., LTD. Address: 10F.-3, No.54, Songjiang Rd., Zhongshan Dist., Taipei City, 104 Taiwan Product Name: Magnetic Charging Car Mount FCCID: 2ABY9OMNIA-CX2 Model(s): OMNIA CX2 2.911(d)(5)(ii) Applicant filing We, [Adam Elements International Co., LTD.] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 ,established pursuant to §1.50002 of this chapter,as an entity producing coveredcommunications equipment. Yours sincerely, Name: Alan Chang Date: May 06, 2023 Signature: Title and Company name: General Manager / Adam Elements International Co., LTD. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Adam Elements International Co., LTD. 2.911 (d)(7)USA Agent v1.4 Section 2.911(d)(7) USA Agent for Service of Process Company name: Adam Elements International Co., LTD. Address: 10F.-3, No.54, Songjiang Rd., Zhongshan Dist., Taipei City, 104 Taiwan Product Name: Magnetic Charging Car Mount FCCID: 2ABY9OMNIA-CX2 Model(s): OMNIA CX2 2.911(d)(7) USA Designated Agent for Service of Process We, [Adam Elements International Co., LTD.] (“the applicant”) designate [SELLER HELPER INC.] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent:We acknowledgeour consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledgeour acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation:We acknowledgeourobligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email addressfor no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: SELLER HELPER INC. USA Address: 1312 17th Street # 1298, Denver, CO 80202, United States FRN Number: 0033406737 Contact Name: Fairy Lee Telephone No: (303) 731-9873 Email: [email protected] Applicant Company name: Adam Elements International Co., LTD. Address: 10F.-3, No.54, Songjiang Rd., Zhongshan Dist., Taipei City, 104 Taiwan FCC Grantee Code: 2ABY9 Contact Name: Alan Chang Telephone No: +886-2-27389900 Email: [email protected] Signature: Title: Manager Signature: Title: General Manager Date: May 06, 2023 Date: May 06, 2023 Adam Elements International Co., LTD. 2.911 (d)(7)USA Agent v1.4 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Adam Elements International Co., LTD. Agent Authorization Company: Adam Elements International Co., LTD. Address: 10F.-3, No.54, Songjiang Rd., Zhongshan Dist., Taipei City, 104 Taiwan Product Name: Magnetic Charging Car Mount Model Number(s): OMNIA CX2 Product Description: Magnetic Charging Car Mount We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Si gnature: Date: May 06, 2023 Name: Alan Chang Title: General Manager Company: Adam Elements International Co., LTD.

Annex A External Photos Report No.: HK2301100106-1E/2E Page 1 of 4 Report No.: HK2301100106-1E/2E Page 2 of 4 Report No.: HK2301100106-1E/2E Page 3 of 4 Report No.: HK2301100106-1E/2E Page 4 of 4

FCC ID LABEL: Ca: 10 x 40mm Label Location FCC ID: 2ABY9OMNIA-CX2

Annex B Internal Photo Report No.: HK2301100106-1E/2E Page 1 of 3 Report No.: HK2301100106-1E/2E Page 2 of 3 Antenna Report No.: HK2301100106-1E/2E Page 3 of 3

Page 1 of 11 Report No.: HK2301100106-2E FCC TEST REPORT Test report On Behalf of Adam Elements International Co., LTD. For Magnetic Charging Car Mount Model No.: OMNIA CX2 FCC ID: 2ABY9OMNIA-CX2 Prepared For : Adam Elements International Co., LTD. 10F.-3, No.54, Songjiang Rd., Zhongshan Dist., Taipei City, 104 Taiwan Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Jan. 05, 2023 ~ Jan. 12, 2023 Date of Report: Jan. 12, 2023 Report Number: HK2301100106-2E Page 2 of 11 Report No.: HK2301100106-2E TEST RESULT CERTIFICATION Applicant’s name.................. : Adam Elements International Co., LTD. Address .................................. : 10F.-3, No.54, Songjiang Rd., Zhongshan Dist., Taipei City, 104 Taiwan Manufacture's Name ............ : Shenzhen Yiqizhao Technology Co.,Ltd. Address .................................. : Room 201, Building 6, Winlead Intelligent Park, Bantian, Shenzhen, China Product description Trade Mark: Product name ............................ : Magnetic Charging Car Mount Model and/or type reference : OMNIA CX2 Standards .............................. : FCC CFR 47 PART 18, KDB680106 D01 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ........................................... : Date (s) of performance of tests ............. : Jan. 05, 2023 ~ Jan. 12, 2023 Date of Issue .......................................... : Jan. 12, 2023 Test Result .............................................. : Pass Testing Engineer : (Gary Qian) Technical Manager : (Eden Hu) Authorized Signatory : (Jason Zhou) Page 3 of 11 Report No.: HK2301100106-2E Note: 1. For a mo re detailed features description, please refer to the manufacturer’s specifications or the User's Manual. 2. Channel List Channel Frequency (KHz) Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) 01 137 The EUT antenna is Coil Antenna. No antenna other than that furnished by the responsible party shall be used with the device. 2. SUMMARY OF TEST RESULTS 2.1. Test procedures according to the technical standards: FCC KDB680106 D01 RF Exposure Wireless Charging Apps v03r01 FCC CFR 47 Standard Section Test Item Judgment Remark FCC CFR 47 part1, 1.1310 KDB680106 D01v03r01 (3)(3) Electric Field Strength (E) (V/m) PASS Magnetic Field Strength (H) (A/m) PASS 2.2. Measurement Uncertainty The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 All emissions, radiated(<30M)(9KHz-30MHz) ±3.90dB 2 Temperature ±0.5°C 3 Humidity ±2% Page 4 of 11 Report No.: HK2301100106-2E 2.3. Test Mode EUT Mode Description Cell phone setting 15W 2.4. Test Instruments Description Brand Model No. Frequency Range Calibrated Date Calibrated Until Exposure Level Te s t e r narda ELT-400 N-0231 Feb. 18, 2022 Feb. 17, 2023 Magnetic field probe 100cm 2 narda ELT probe 100cm2 M0675 Feb. 18, 2022 Feb. 17, 2023 NOTE: 1. The calibration interval of the above test instruments is 12 months. Page 5 of 11 Report No.: HK2301100106-2E 3. MAXIMUM PERMISSIBLE EXPOSURE Limit of Maximum Permissible Exposure Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180 / f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1 30 Note 1: f = frequency in MHz ; *Plane-wave equivalent power density. Note 2: For the applicable limit, see FCC 1.1310, 680106 D01 RF Exposure Wireless Charging Apps v03r01. Note 3: Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63A/m. A KDB inquiry is required to determine the applicable exposure limits below 100 kHz. Page 6 of 11 Report No.: HK2301100106-2E 4. TEST PROCEDURE a. For devices designed for typical desktop applications, such a wireless charging pads, RF exposure evaluation should be conducted assuming a user separation distance of (H-field & E- field strengths for all sides is 15cm, H-field strengths of top side is 20cm). E and H field strength measurements or numerical modeling may be used to demonstrate compliance. Measurements should be made from all sides and the top of the primary/client pair, with the 15 cm measured from the center of the probe(s) to the edge of the device. 4.1 Test Setup 4.2 Result Of Maximum Permissible Exposure Page 7 of 11 Report No.: HK2301100106-2E All the test modes completed for test. Only the worst result (15W) as below. For Full load mode: H-Field Strength at 15 cm (E top side: 20cm) from the edges surrounding the EUT (A/m) Field strength Te s t Position A Te s t Position B Te s t Position C Te s t Position D Te s t Position E Limits (A/m) uT 0.699 0.714 0.769 0.847 1.011 / A/m 0.559 0.571 0.615 0.678 0.809 1.63 Note. Calculation: A/m=uT/1.25 For Half Load mode: H-Field Strength at 15 cm (E top side: 20cm) from the edges surrounding the EUT (A/m) Field strength Te s t Position…

Text truncated - open the document above for the full version.

Page 1 of 20 Report No.: HK2301100106-1E FCC TEST REPORT Test report On Behalf of Adam Elements International Co., LTD. For Magnetic Charging Car Mount Model No.: OMNIA CX2 FCC ID: 2ABY9OMNIA-CX2 Prepared For : Adam Elements International Co., LTD. 10F.-3, No.54, Songjiang Rd., Zhongshan Dist., Taipei City, 104 Taiwan Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Jan. 05, 2023 ~ Jan. 12, 2023 Date of Report: Jan. 12, 2023 Report Number: HK2301100106-1E Page 2 of 20 Report No.: HK2301100106-1E TEST RESULT CERTIFICATION Applicant’s name.................. : Adam Elements International Co., LTD. Address .................................. : 10F.-3, No.54, Songjiang Rd., Zhongshan Dist., Taipei City, 104 Taiwan Manufacture's Name ............ : Shenzhen Yiqizhao Technology Co.,Ltd. Address .................................. : Room 201, Building 6, Winlead Intelligent Park, Bantian, Shenzhen, China Product description Trade Mark: Product name ............................ : Magnetic Charging Car Mount Model and/or type reference : OMNIA CX2 Standards .............................. : FCC CFR 47 PART 18 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ........................................... : Date (s) of performance of tests ............. : Jan. 05, 2023 ~ Jan. 12, 2023 Date of Issue .......................................... : Jan. 12, 2023 Test Result .............................................. : Pass Testing Engineer : (Gary Qian) Technical Manager : (Eden Hu) Authorized Signatory : (Jason Zhou) Page 3 of 20 Report No.: HK2301100106-1E Table of Contents Page 1 . TEST SUMMARY 5 1.1 . Test Procedures And Results 5 1.2 . Information of the Test Laboratory 5 1.3 . Measurement Uncertainty 5 2. GENERAL INFORMATION 6 2.1. General Description of EUT 6 2.2. Carrier Frequency of Channels 7 2.3. Operation of EUT during testing 7 2.4. Description of Test Setup 7 2.5. Measurement Instruments List 8 3. CONDUCTED EMISSION TEST 9 3.1. Block Diagram of Test Setup 9 3.2. Conducted Power Line Emission Limit 9 3.3. Test Procedure 9 4. RADIATED EMISSIONS 12 4.1. Block Diagram of Test Setup 12 4.2. Rules and specifications 12 4.3. Test Procedure 13 5. ANTENNA REQUIREMENT 17 6. PHOTOGRAPH OF TEST 18 7. PHOTOS OF THE EUT 20 Page 4 of 20 Report No.: HK2301100106-1E ** Modified History ** Revision Description Issued Data Remark Revision 1.0 Initial Test Report Release Jan. 12, 2023 Jason Zhou Page 5 of 20 Report No.: HK2301100106-1E 1. TEST SUMMARY 1.1. Test Procedures And Results DESCRIPTION OF TEST SECTION NUMBERRESULT CONDUCTED EMISSIONS TEST 18.307 COMPLIANT RADIATED EMISSION TEST 18.305 COMPLIANT Note: 1. PASS: Test item meets the requirement. 2. Fail: Test item does not meet the requirement. 3. N/A: Test case does not apply to the test object. 4. The test result judgment is decided by the limit of test standard. 1.2. Information of the Test Laboratory Shenzhen HUAK Testing Technology Co., Ltd. Add.: 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Testing Laboratory Authorization： A2LA Accreditation Code is 4781.01. FCC Designation Number is CN1229. Canada IC CAB identifier is CN0045. CNAS Registration Number is L9589. 1.3. Measurement Uncertainty Measurement Uncertainty Conducted Emission Expanded Uncertainty =2.71dB, k=2 Radiated emission expanded uncertainty(9kHz-30MHz) = 3.90dB, k=2 Radiated emission expanded uncertainty(30MHz-1000MHz)= 3.90dB, k=2 Radiated emission expanded uncertainty(Above 1GHz) = 4.28dB, k=2 Page 6 of 20 Report No.: HK2301100106-1E 2. GENERAL INFORMATION 2.1. General Description of EUT Equipment: Magnetic Charging Car Mount Model Name: OMNIA CX2 Series Models: N/A Model Difference: N/A Trade Mark: FCC ID: 2ABY9OMNIA-CX2 Antenna Type: Coil Antenna Antenna Gain: 0dBi Operation frequency: 111.5KHz~205KHz Test frequency: 137KHz Number of Channels: 1 Modulation Type: ASK Power Source: Input: DC 5V/2A, 9V/2A, 12V/1.5A Output: 5W/7.5W/10W/15W Power Rating: Input: DC 5V/2A, 9V/2A, 12V/1.5A Output: 5W/7.5W/10W/15W Page 7 of 20 Report No.: HK2301100106-1E 2.2. Carrier Frequency of Channels Operation Frequency each of channel Channel Frequency 1 137KHz 2.3. Operation of EUT during testing Operating Mode The mode is used: Transmitting mode 2.4. Description of Test Setup Operation of EUT during testing: AC Plug Adapter information Model: BD-F1 Input: AC100-240V~ 50/60Hz, 1.5A USB-C Output: (65W PD)DC5V 3A or 9V 3A or 12V 3A or 15V 3A or 20V 3.25A MAX USB-A Output: DC 5V 2.4A The sample was placed (0.8m (30MHz~1GHz), 0.8m (9KHz~30MHz) ) above the ground plane of 3m chamber. Measurements in both horizontal and vertical polarities were performed. During the test, each emission was maximized by: having the EUT continuously working, investigated all operating modes, rotated about all 3 axis (X, Y & Z) and considered typical configuration to obtain worst position, manipulating interconnecting cables, rotating the turntable, varying antenna height from 1m to 4m in both horizontal and vertical polarizations. The emissions worst-case are shown in Test Results of the following pages. The worst case is X position. Adapter EUT Load Page 8 of 20 Report No.: HK2301100106-1E 2.5. Measurement Instruments List Item Equipment Manufacturer Model No.Serial No. Last Cal. Cal. Interval 1. L.I.S.N. Artificial Mains Network R&S ENV216 HKE-002 Feb. 18, 20221 Year 2. Receiver R&S ESCI 7 HKE-010 Feb. 18, 20221 Ye…

Text truncated - open the document above for the full version.

OMNIA CX2 Radiated Emission Conducted Emissions