2AC23-DCT1SWIFI+BT Module

Hui Zhou Gaoshengda Technology Co., LTD DCT1SR2501C PAGE 1 Version 1.0 WIFI+BT Module IEEE 802.11 a/b/g/n/ac 2T/2R Model Number: DCT1SR2501C Product Descrition The DCT1SR2501C is a complete dual-band(2.4GHz and 5GHz)WIFI 2×2 MIMO module. This module provides a high level of integration with a dual-stream IEEE 802.11ac MAC/ base band /radio and Bluetooth 5.4. The WLAN operation supports 20MHz,40MHz and 80MHz channels for data rates up to 866.7Mbps. It fully complies with IEEE 802.11 a/b/g/n/ac feature rich wireless connectivity at high standards,delivers reliable, cost-effective, throughput from an extended distance. Product Features ◆ Complies with IEEE 802.11b/g/n for 2.4GHz and IEEE 802.11a/n/ac 5GHz Wireless LAN. ◆ Bluetooth v5.4 ◆ Two transmit and Two receive path(2T2R) ◆ Works with all existing network nfrastructure. ◆ Capable of up to 128-Bit WEP Encryption. ◆ Freedom to roam while staying connected. ◆ UP to 866.7 Mbps High-Speed Transfer Rate in 802.11ac mode of operation. ◆ Operating Systems：Linux,Windows ◆ Low power consumption. ◆ Easy to install and configure. ◆ High speed USB 2.0 interface ◆ ROHS compliant Product Specification Model WIF+BT Module Product Name DCT1SR2501C Standard 802.11 a/b/g/n/ac Interface USB Data Transfer Rate Up to 866.7Mbps Modulation Method GFSK,π/4-DQPSK,8DPSK(bluetooth) DQPSK,DBPSK,CCK(802.11b) QPSK,BPSK,16QAM,64QAM with OFDM (802.11g) QPSK,BPSK,16QAM,64QAM with OFDM (802.11n) QPSK,BPSK,16QAM,64QAM with OFDM (802.11a) QPSK,BPSK,16QAM,64QAM,256QAM with OFDM (802.11ac) Frequency Band BLUETOOTH 2402~2480 MHz WIFI 2.4G: 2412~2462 MHz 5G: 5180~5240MHz, 5260~5320MHz, 5500~5720MHz, 5745~5825MHz Operation Mode Infrastructure Security WEP, TKIP, AES, WPA, WPA2 Operating Voltage 3.3V±10% Current Consumption ＜1000mA Antenna Type PIFA Operating Temperature 0 ~ 70°C ambient temperature Storage Temperature -40 ~ 80°C ambient temperature Humidity 5 to 95 % maximum (non-condensing) Hui Zhou Gaoshengda Technology Co., LTD DCT1SR2501C PAGE 2 Version 1.0 NOTICE: ◆please keep this product and accessories attached to the places which children can't touch; ◆do not splash water or other liquid onto this product, otherwise it may cause damage; ◆do not put this product near the heat source or direct sunlight, otherwise it may cause deformation or malfunction; ◆please keep this product away from flammable or naked flame; ◆please do not repair this product by yourself. Only qualified personnel can be repaired. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2.2 This module has been assessed against the following FCC rule parts: CFR 47 FCC Part 15 C (15.247, DTS and DSS) and CFR 47 FCC Part 15 E (NII). It is applicable to the modular transmitter 2.3 This radio transmitter 2AC23-DCT1S has been approved by Federal Communications Commission to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. The concrete contents to check are the following three points. １) Maximum antenna gains are shown in item 2.8 below. ２) Should be installed so that the end user cannot modify the antenna ３) Feed line should be designed in 50ohm Fine-tuning of return loss etc. can be performed using a matching network. The antenna shall not be accessible for modification or change by the end user. 2.4 The module complies with FCC Part 15.247 / Part 15.407 and apply for Single module approval. 2.5 Trace antenna designs: Not applicable, the antenna conector for this module are integrated into the module. Use of external antennas or antennas integrated into the host circuit board are not an option. 2.6 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Hui Zhou Gaoshengda Technology Co., LTDDCT1SR2501C PAGE 3 Version 1.0 2.7 The following antennas have been certified for use with this module. Only antennas of the same type with equal or lower gain may also be used with this module. Other types of antennas and/or higher gain antennas may require the additional authorization for operation. The installer should use unique antenna connector and Antenna types not included in this list that have a gain greater than …

Text truncated - open the document above for the full version.

External Photographs Page 2 of 4 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. DCT1SR2501C DCT1SR2501 Ant2(Right) Ant1(Left) Ant0(BT) Page 3 of 4 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 4 of 4 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch.

Appendix II Setup Photographs RADIATED RF MEASUREMENT SETUP (ABOVE 1 GHz) MEASUREMENT POSITION MEASUREMENT POSITION (X axis) MEASUREMENT POSITION (Y axis) MEASUREMENT POSITION (Z axis) RADIATED RF MEASUREMENT SETUP (30MHz~1GHz) RADIATED RF MEASUREMENT SETUP (Below 30MHz) POWERLINE CONDUCTED EMISSIONS MEASUREMENT SETUP RF CONDUCTED MEASUREMENT SETUP DFS MEASUREMENT SETUP

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. CFR 47 FCC PART 15 SUBPART C ISED RSS-247 Issue 4 TEST REPORT For WIFI+BT Module MODEL NUMBER: DCT1SR2501C SERIES MODEL: DCT1SR2501 REPORT NUMBER: 4791985571-1-RF-1 ISSUE DATE: November 11, 2025 FCC ID: 2AC23-DCT1S IC: 12290A-DCT1S Prepared for Hui Zhou Gaoshengda Technology Co.,LTD No.6,Qiaoguang Road,Chenjiang Street,Zhongkai High-tech Zone,Huizhou,Guangdong,China Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Room 101, Building 2, No.4, Information Road, Songshan Lake, Dongguan, Guangdong, China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4791985571-1-RF-1 Page 2 of 84 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Revision History Rev. Issue Date Revisions Revised By V0 November 11, 2025 Initial Issue REPORT NO.: 4791985571-1-RF-1 Page 3 of 84 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Summary of Test Results Test Item Clause Limit/Requirement Result Antenna Requirement N/A FCC Part 15.203/15.247 (c) RSS-GEN Clause 6.8 Pass AC Power Line Conducted Emission ANSI C63.10-2020, Clause 6.2 FCC Part 15.207 RSS-GEN Clause 8.8 Pass Conducted Output Power ANSI C63.10-2020, Clause 11.9.1.2 FCC Part 15.247 (b)(3) RSS-247 Clause 6.3.2 Pass 6dB Bandwidth and 99% Occupied Bandwidth ANSI C63.10-2020, Clause 11.8.1 FCC Part 15.247 (a)(2) RSS-247 Clause 6.3.1 (a) RSS-Gen Clause 6.7 Pass Power Spectral Density ANSI C63.10-2020, Clause 11.10.2 FCC Part 15.247 (e) RSS-247 Clause 6.3.1 (b) Pass Conducted Band edge and spurious emission ANSI C63.10-2020, Clause 11.11 FCC Part 15.247(d) RSS-247 Clause 6.6 Pass Radiated Band edge and Spurious Emission ANSI C63.10-2020, Clause 11.12 FCC Part 15.247 (d) FCC Part 15.205/15.209 RSS-247 Clause 6.6 RSS-GEN Clause 8.9 Pass Duty Cycle ANSI C63.10-2020, Clause 11.6 None; for reporting purposes only. Pass Note: For ISED, this report is also performed according to ANSI C63.10-2020+Cor.1-2023 standards. *This test report is only published to and used by the applicant, and it is not for evidence purpose in China. *The measurement result for the sample received is <Pass> according to <CFR 47 FCC PART 15 SUBPART C ISED RSS-247 Issue 4> when <Simple Acceptance> decision rule is applied. REPORT NO.: 4791985571-1-RF-1 Page 4 of 84 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. CONTENTS 1. ATTESTATION OF TEST RESULTS ...................................................................................... 6 2. TEST METHODOLOGY .......................................................................................................... 7 3. FACILITIES AND ACCREDITATION ...................................................................................... 7 4. CALIBRATION AND UNCERTAINTY ..................................................................................... 8 4.1. MEASURING INSTRUMENT CALIBRATION ............................................................ 8 4.2. MEASUREMENT UNCERTAINTY ............................................................................. 8 5. EQUIPMENT UNDER TEST .................................................................................................... 9 5.1. DESCRIPTION OF EUT ............................................................................................. 9 5.2. CHANNEL LIST .......................................................................................................... 9 5.3. MAXIMUM POWER .................................................................................................... 9 5.4. TEST CHANNEL CONFIGURATION ....................................................................... 10 5.5. THE WORSE CASE POWER SETTING PARAMETER .......................................... 10 5.6. DESCRIPTION OF AVAILABLE ANTENNAS .......................................................... 10 5.7. SUPPORT UNITS FOR SYSTEM TEST .................................................................. 11 6. MEASURING EQUIPMENT AND SOFTWARE USED ......................................................... 12 7. ANTENNA PORT TEST RESULTS ...................................................................................... 15 7.1. CONDUCTED OUTPUT POWER ............................................................................ 15 7.2. 6DB BANDWIDTH AND 99% OCCUPIED BANDWIDTH ........................................ 16 7.3. POWER SPECTRAL DENSITY ............................................................................... 18 7.4. CONDUCTED BAND EDGE AND SPURIOUS EMISSION...................................... 19 7.5. DUTY CYCLE ........................................................................................................... 21 8. RADIATED TEST RESULTS ................................................................................................ 22 8.1. RESTRICTED BANDEDGE ..................................................................................... 30 8.2. SPURIOUS EMISSIONS(1 GHZ~3 GHZ) ................................................................ 35 8.3. SPURIOUS EMISSIO…

Text truncated - open the document above for the full version.

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. CFR 47 FCC PART 15 SUBPART C ISED RSS-247 Issue 4 TEST REPORT For WIFI+BT Module MODEL NUMBER: DCT1SR2501C SERIES MODEL: DCT1SR2501 REPORT NUMBER: 4791985571-1-RF-3 ISSUE DATE: November 11, 2025 FCC ID: 2AC23-DCT1S IC: 12290A-DCT1S Prepared for Hui Zhou Gaoshengda Technology Co.,LTD No.6,Qiaoguang Road,Chenjiang Street,Zhongkai High-tech Zone,Huizhou,Guangdong,China Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Room 101, Building 2, No.4, Information Road, Songshan Lake, Dongguan, Guangdong, China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4791985571-1-RF-3 Page 2 of 96 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Revision History Rev. Issue Date Revisions Revised By V0 November 11, 2025 Initial Issue REPORT NO.: 4791985571-1-RF-3 Page 3 of 96 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Summary of Test Results Test Item Clause Limit/Requirement Result Antenna Requirement N/A FCC Part 15.203/15.247 (c) RSS-GEN Clause 6.8 Pass AC Power Line Conducted Emission ANSI C63.10-2020, Clause 6.2 FCC Part 15.207 RSS-GEN Clause 8.8 Pass Conducted Output Power ANSI C63.10-2020, Clause 11.9.2.3.1 FCC Part 15.247 (b)(3) RSS-247 Clause 6.3.2 Pass 6dB Bandwidth and 99% Occupied Bandwidth ANSI C63.10-2020, Clause 11.8.1 FCC Part 15.247 (a)(2) RSS-247 Clause 6.3.1 (a) RSS-Gen Clause 6.7 Pass Power Spectral Density ANSI C63.10-2020, Clause 11.10.5 FCC Part 15.247 (e) RSS-247 Clause 6.3.1 (b) Pass Conducted Band edge and spurious emission ANSI C63.10-2020, Clause 11.11 FCC Part 15.247(d) RSS-247 Clause 6.6 Pass Radiated Band edge and Spurious Emission ANSI C63.10-2020, Clause 11.12 FCC Part 15.247 (d) FCC Part 15.205/15.209 RSS-247 Clause 6.6 RSS-GEN Clause 8.9 Pass Duty Cycle ANSI C63.10-2020, Clause 11.6 None; for reporting purposes only. Pass Note: For ISED, this report is also performed according to ANSI C63.10-2020+Cor.1-2023 standards. *This test report is only published to and used by the applicant, and it is not for evidence purpose in China. *The measurement result for the sample received is <Pass> according to <CFR 47 FCC PART 15 SUBPART C ISED RSS-247 Issue 4> when <Simple Acceptance> decision rule is applied. REPORT NO.: 4791985571-1-RF-3 Page 4 of 96 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. CONTENTS 1. ATTESTATION OF TEST RESULTS..................................................................................... 6 2. TEST METHODOLOGY......................................................................................................... 7 3. FACILITIES AND ACCREDITATION..................................................................................... 7 4. CALIBRATION AND UNCERTAINTY ................................................................................... 8 4.1. MEASURING INSTRUMENT CALIBRATION ........................................................... 8 4.2. MEASUREMENT UNCERTAINTY ............................................................................ 8 5. EQUIPMENT UNDER TEST .................................................................................................. 9 5.1. DESCRIPTION OF EUT ........................................................................................... 9 5.2. CHANNEL LIST ........................................................................................................ 9 5.3. MAXIMUM POWER ................................................................................................ 10 5.4. TEST CHANNEL CONFIGURATION ...................................................................... 10 5.5. THE WORSE CASE POWER SETTING PARAMETER .......................................... 10 5.6. DESCRIPTION OF AVAILABLE ANTENNAS ......................................................... 12 5.7. SUPPORT UNITS FOR SYSTEM TEST ................................................................. 13 6. MEASURING EQUIPMENT AND SOFTWARE USED......................................................... 14 7. ANTENNA PORT TEST RESULTS ..................................................................................... 17 7.1. CONDUCTED OUTPUT POWER ........................................................................... 17 7.2. 6DB BANDWIDTH AND 99% OCCUPIED BANDWIDTH ........................................ 18 7.3. POWER SPECTRAL DENSITY .............................................................................. 20 7.4. CONDUCTED BAND EDGE AND SPURIOUS EMISSION ..................................... 21 7.5. DUTY CYCLE ......................................................................................................... 23 8. RADIATED TEST RESULTS ............................................................................................... 24 8.1. RESTRICTED BANDEDGE .................................................................................... 32 8.2. SPURIOUS EMISSIONS(1 GHZ~3 GHZ) ............................................................... 41 8.3. SPURIOUS EMISSIONS(3 GHZ~18 GHZ) ............…

Text truncated - open the document above for the full version.

S S P P E E C C I I F F I I C C A A T T I I O O N N SHEET FOR APPROVAL CUST OMER(客户名称) 高盛达 CS P/N(客户机种) PA RT NAME(品名) BT Antenna FREQUENCY(频率) 2400-25 00MHz GSD NO.(物料编号) WC0D DATE(日期) 2016-06-25 CUST OMER CHECKEAPP ROVAL Remark(备注)： Sign(客户确认签字盖 章)： DESIGN CHECK APPROVA L HUIZHOU GAOSHENGDA TECHNOLOGY CO.,LTD No.2,Jin-da Road,Huinan High-tech Industrial Park,Hui-ao Avenue,Huizhou City,Guangdong,ChinaNo.2,Jin-da Road,Huinan High-tech Industrial Park,Hui-ao Avenue,Huizhou City,Guangdong,China No.2,Jin-da Road,Huinan High-tech Industrial Park,Hui-ao Avenue,Huizhou City,Guangdong,China 邹一 麟 赵烽 ANTENNA SPECIFICATION GSD P/N : WC0D Version 1.0 Page 1 of 10 HUIZHOU GAOSHENGDA TECHNOLOGY CO.,LTD Index 1. General Description 1 2. Electrical Specifications 2 2-1 Set-up 2 2-1-1 Frequency Band 2 2-1-2 Impedance 2 2-1-3 Matching Requirements 2 2-1-4 VSWR 2 2-2 Test Data 3 2-2-1 VSWR 3 2-2-2 Smith Chart 4 2-2-3 GAIN Efficiency 4 2-2-4 The direction of figure 5~6 2-2-5 Testing equipment 6~7 3. Mechanical Specification 8 3-1 Mechanical Configuration 8 3-1-1 Mechanical Configuration( 2.4G ) 8 3-1-2 Mechanical Configuration( 天线组件 ) 9 ANTENNA SPECIFICATION GSD P/N : WC0D Version 1.0 Page 2 of 10 HUIZHOU GAOSHENGDA TECHNOLOGY CO.,LTD 1. General Description Dbi Decibel relative isotropic antenna Tx Transmit frequency Rx Receive frequency VSWR Voltage Standing Wave Ratio GSM Global Service for Mobile communication DCS Digital Communication System PCS Personal Communication System PHS Personal Handly-phone System SAR Specific Absorption Rate PCB Printed Circuit Board 2. Electrical Specifications 2-1 Set-up 2-1-1 Frequency Band Frequency Band Frequency 2.4G 2400-2500MHZ 2-1-2 Impedance Nominal Impedance(including matching circuit) : 50 ohms 2-1-3 Matching Requirements The matching circuit on the PCB of the handset is according to Figure 1 Optimum matching circuit is highly dependent on the handset and thus. Final matching circuit layout and values will be defined when handset is available. ANTENNA SPECIFICATION GSD P/N : WC0D V ersion 1.0 Page 3 of 10 HUIZHOU GAOSHENGDA TECHNOLOGY CO.,LTD 2-1-4 VS WR And GAIN VSWRGAIN Freq. Band OPEN SPEC Band Freq. OPEN SPEC 2400MHz ≦2.0 2400MHz ≧-1.0dBi 2500MHz ≦2.0 2500MHz ≧-1.0dBi ※Measuring a 50Ω test jig is connected to a network analyzer to measure the VSWR. ※※All test value is done in customer approval fixture. 2-2 T est Data 2-2-1 VSWR Mod el No:WC0D File: GSD NO:WC0DAntenna Note: 2.4G Sa mple No:yes T est Condition: Free Space ANTENNA SPECIFICATION GSD P/N : WC0D V ersion 1.0 Page 4 of 10 HUIZHOU GAOSHENGDA TECHNOLOGY CO.,LTD 2-2-2 Smith Chart 2-2-3 GAIN Efficiency Gain： Frequency (MHz) 2400 2450 2500 Gain Efficiency (dBi) 1.42 (44%) 1.72 (48%) 1.65 (45%) ANTENNA SPECIFICATION GSD P/N : WC0D V ersion 1.0 Page 5 of 10 HUIZHOU GAOSHENGDA TECHNOLOGY CO.,LTD 2-2-4 The direction of figure H E1 ANTENNA SPECIFICATION GSD P/N : WC0D V ersion 1.0 Page 6 of 10 HUIZHOU GAOSHENGDA TECHNOLOGY CO.,LTD E2 2-2- 5 Testing equipment ANTENNA SPECIFICATION GSD P/N : WC0D V ersion 1.0 Page 7 of 10 HUIZHOU GAOSHENGDA TECHNOLOGY CO.,LTD ANTENNA SPECIFICATION GSD P/N : WC0D V ersion 1.0 Page 8 of 10 HUIZHOU GAOSHENGDA TECHNOLOGY CO.,LTD 3. M echanical Specification 3-1 M echanical Configuration 3-1-1 Mechanical Configuration( 2.4G) ANTENNA SPECIFICATION GSD P/N : WC0D V ersion 1.0 Page 9 of 10 HUIZHOU GAOSHENGDA TECHNOLOGY CO.,LTD 中 天 迅 通 信 技 术 有 限 公 司 未注明 公差 5 UND 5-10 10-35 35-50 50-100 10 0 OVE ± 0.08 ±0.10±0.12±0.15±0.18±0.20 A1 1:1 展开图 立体图 粉红色 线为折弯线 红色 线为压印 红色 线为压印 3-1-2 M echanical Configuration( 天线组件) ANTENNA SPECIFICATION GSD P/N : WC0D V ersion 1.0 Page 10 of 10 HUIZHOU GAOSHENGDA TECHNOLOGY CO.,LTD 中 天 迅 通 信 技 术 有 限 公 司 未注明公 差 5 UND 5-10 10-35 35-50 50-100 1 00 OVE ±0 .08 ±0.10 ±0.12±0.15 ±0.18±0.20 A1 1: 1 红色 线为压印 注 ：带*号尺寸为CPK检测尺寸 Model: DCT1SR2501C Model: DCT1SR2501 BT antenna trace BT antenna trace

深圳汉阳天线设计有限公司 SHENZHEN HANGYANG ANTENNA DESIGN CO., LTD. 深圳市宝安区前进二路宝运达物流信息大厦12A11 12A11, Baoyunda Logistics Information Building, Baoan, Shenzhen, Guangdong TEL：0755-23069700 FAX:0755-23069700 第1页 共11页 供应商核准(Supplier Approval) 拟制(Producer) 审核(Checked) 批准(Approved) 刘志高 吕俊鹏 曲龙跃 客户核准(Customer Approval) 审核(Checked) 批准(Approved) 产品规格书 PRODUCT SPECIFICATIONS 此文档内容为深圳汉阳天线设计有限公司所有，在没有获得本公司书面同意的情况下，禁止部分(全 部)复制或泄露给任何第三方。 Copyright ©2014-2024 Hanyang Antenna Design Co., Ltd. All rights reserved. 客户名称(Customer Name)：惠州高盛达科技有限公司 项目名称(Project Name)：DCT 产品规格(Product Specification)：2.4G+5.8G WIFI ANTENNA 客户料号(Customer Part No.)： G.5.13.DCT23XXXBD 拟定日期(Date): 2022-07-01 深圳汉阳天线设计有限公司 SHENZHEN HANGYANG ANTENNA DESIGN CO., LTD. 深圳市宝安区前进二路宝运达物流信息大厦12A11 12A11, Baoyunda Logistics Information Building, Baoan, Shenzhen, Guangdong TEL：0755-23069700 FAX:0755-23069700 第2页 共11页 修订纪录 (Change Description) 日期(Date) 修改内容(Modification Content) 版本(Version) 更改人(Author) 2022/07/01 首次制作 V01 刘志高 深圳汉阳天线设计有限公司 SHENZHEN HANGYANG ANTENNA DESIGN CO., LTD. 深圳市宝安区前进二路宝运达物流信息大厦12A11 12A11, Baoyunda Logistics Information Building, Baoan, Shenzhen, Guangdong TEL：0755-23069700 FAX:0755-23069700 第3页 共11页 目录 (Index) 封面(Cover)- ---------------------------------------------------------------------------1 修订纪录(Change Description)------------------------------------------------------2 目录(Index)------------------------------------------------------------------------------3 产品图片(Product Prototype)----------------------------------------------------------4 产品主要技术参数(Main Product Properties)--------------------------------------5 结构图纸(Structural Drawing)--------------------------------------------------------6 性能测试报告(Performance Testing Report)---------------------------------------7 可靠性测试报告(Reliability Test)---------------------------------------------------9 包装(Packing)--------------------------------------------------------------------------10 深圳汉阳天线设计有限公司 SHENZHEN HANGYANG ANTENNA DESIGN CO., LTD. 深圳市宝安区前进二路宝运达物流信息大厦12A11 12A11, Baoyunda Logistics Information Building, Baoan, Shenzhen, Guangdong TEL：0755-23069700 FAX:0755-23069700 第4页 共11页 产品图片 (Product Prototype) 模组实物 深圳汉阳天线设计有限公司 SHENZHEN HANGYANG ANTENNA DESIGN CO., LTD. 深圳市宝安区前进二路宝运达物流信息大厦12A11 12A11, Baoyunda Logistics Information Building, Baoan, Shenzhen, Guangdong TEL：0755-23069700 FAX:0755-23069700 第5页 共11页 产品主要技术参数 (Main Product Properties) 电气指标 Technical Property 频率范围 (Frequency Spectrum) 2400—2500MHz 5150—5800MHz 特征阻抗 (Characteristic Impedance) 50Ω 50Ω 驻 波 比 (VSWR) ≤ 2 ≤ 2 平均增益dBi (Peak Gain) -3 dBi1 dBi 平均效率 % (Efficiency %) 36% 56% 极化方式 (Polarization) 线极化 (Linear Polarization) 辐射方向 (Directivity) 全向 (Omnidirectional) 物理指标 Physical Property 天线材料 (Antenna Material) SUS304 线材 (Cable) 无 天线杆套 (Antenna Casing) 无 工作/保存温度 (Operation/Storage Temp.) -40 ~ 125 o C 深圳汉阳天线设计有限公司 SHENZHEN HANGYANG ANTENNA DESIGN CO., LTD. 深圳市宝安区前进二路宝运达物流信息大厦12A11 12A11, Baoyunda Logistics Information Building, Baoan, Shenzhen, Guangdong TEL：0755-23069700 FAX:0755-23069700 第6页 共11页 结构图纸 (Structural Drawing) 深圳汉阳天线设计有限公司 SHENZHEN HANGYANG ANTENNA DESIGN CO., LTD. 深圳市宝安区前进二路宝运达物流信息大厦12A11 12A11, Baoyunda Logistics Information Building, Baoan, Shenzhen, Guangdong TEL：0755-23069700 FAX:0755-23069700 第7页 共11页 性能测试报告 (Performance Testing Report) VSWR / S-参数 (VSWR / S-parameter) L边 R边 深圳汉阳天线设计有限公司 SHENZHEN HANGYANG ANTENNA DESIGN CO., LTD. 深圳市宝安区前进二路宝运达物流信息大厦12A11 12A11, Baoyunda Logistics Information Building, Baoan, Shenzhen, Guangdong TEL：0755-23069700 FAX:0755-23069700 第8页 共11页 效率&增益 (Efficiency & Gain) L边 2400MHz 2430MHz 2450MHz 2470MHz 2500MHz 效率(Efficiency) 37.57 % 37.76 % 37.82% 36.9 % 36.34% 增益(Peak Gain) -1.17 dBi -1.02 dBi -0.99 dBi -1.21 dBi -1.39 dBi L边 5150MHz 5400MHz 5600MHz 5700MHz 5800MHz 效率(Efficiency) 42.87 % 48.47 % 47.72% 48.46 % 54.61% 增益(Peak Gain) -0.54 dBi 0.55 dBi 0.24 dBi 0.28 dBi 0.67 dBi R边 2400MHz 2430MHz 2450MHz 2470MHz 2500MHz 效率(Efficiency) 17.47 % 18.46 % 18.56% 18.62% 18.95% 增益(Peak Gain) -3.92 dBi -3.70 dBi -3.62 dBi -3.54 dBi -3.34 dBi R边 5150MHz 5400MHz 5600MHz 5700MHz 5800MHz 效率(Efficiency) 57.09 % 58.32 % 60.54 % 62.12 % 53.68 % 增益(Peak Gain) 0.92 dBi 1.09 dBi 1.08 dBi 1.13 dBi 1.21 dBi 深圳汉阳天线设计有限公司 SHENZHEN HANGYANG ANTENNA DESIGN CO., LTD. 深圳市宝安区前进二路宝运达物流信息大厦12A11 12A11, Baoyunda Logistics Information Building, Baoan, Shenzhen, Guangdong TEL：0755-23069700 FAX:0755-23069700 第9页 共11页 3D辐射图 (3D&2D Radiation Pattern) L边 R 边 深圳汉阳天线设计有限公司 SHENZHEN HANGYANG ANTENNA DESIGN CO., LTD. 深圳市宝安区前进二路宝运达物流信息大厦12A11 12A11, Baoyunda Logistics Information Building, Baoan, Shenzhen, Guangdong TEL：0755-23069700 FAX:0755-23069700 第10页 共11页 可靠性测试报告 (Reliability Test) 盐雾试验报告 Salt spray test report 试验样板名称 Test template name WIFI钢片天线 测试日期 Test date 2022.06.24 设备名称 Equipment name 盐雾腐蚀试验箱 Salt spray corrosion test chamber 测试数量 Number of tests 5 PCS 试验方法 Test method 将测试样板放入调制好的盐溶液试验箱内，腐蚀箱进行连续喷雾试验。 Put the test sample into the modulated salt solution test chamber and carry out continuous spray test in the corrosion chamber. 盐溶液浓度 Salt solution concentration 52g/L 盐溶液 PH 值：6.5-7.2 PH value of salt solution 试验周期： 24h Test cycle 试验标准 Test standard GB/T10125《人造气氛腐蚀试验、盐雾试验》进行试验；结果按照GB/T6461-2002 《金属基体上金属和其他无机覆盖层经腐蚀试验后是试样和试件的评级》评级。 The test shall be conducted according to GB / t10125 corrosion test in artificial atmosphere and salt spray test; The results are rated in accordance with GB / t6461-2002 "evaluation of samples and test pieces after corrosion test of metal and other inorganic coatings on metal substrates" 试验结果 Test result 编号 Number 耐腐蚀等级 Corrosion resistance grade 评定结果 Evaluation results 备注 Annotation 1 Rp/Ra=10/10vsB 合格/PASS 2 Rp/Ra=10/10vsB 合格/PASS 3 Rp/Ra=10/10vsB 合格/PASS 4 Rp/Ra=10/10vsB 合格/PASS 5 Rp/Ra=10/10vsB 合格/PASS 深圳汉阳天线设计有限公司 SHENZHEN HANGYANG ANTENNA DESIGN CO., LTD. 深圳市宝安区前进二路宝运达物流信息大厦12A11 12A11, Baoyunda Logistics Information Building, Baoan, Shenzhen, Guangdong TEL：0755-23069700 FAX:0755-23069700 第11页 共11页 标准箱 数量 包装(Packing) 产品包装规范 Packing Criterion 一、标签要求 (Labeling requirements) 内标签 长 …

Text truncated - open the document above for the full version.

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. FCC RF EXPOSURE REPORT For WIFI+BT Module MODEL NUMBER: DCT1SR2501C SERIES MODEL: DCT1SR2501 REPORT NUMBER: 4791985571-1-RF-1 ISSUE DATE: November 11, 2025 FCC ID: 2AC23-DCT1S Prepared for Hui Zhou Gaoshengda Technology Co.,LTD No.6,Qiaoguang Road,Chenjiang Street,Zhongkai High-tech Zone,Huizhou,Guangdong,China Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Room 101, Building 2, No.4, Information Road, Songshan Lake, Dongguan, Guangdong, China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4791985571-1-RF-5 Page 2 of 7 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0112 This report shall not be reproduced except in full, without the written approval of UL Verification Ser…

Text truncated - open the document above for the full version.