2AC37KBSLT0234Portable Speaker Lantern

Forward Industries, 33401. U.S.A 24/07/20 Port able Speaker Lantern Please read these instructions carefully before using and keep for future reference. Technical Specification Contents Ambient temperature for operation: LEDs: LEDs Rated Watt: Battery: Remote control battery: Remote control effective distance: Charging time: Operation time: Charger - USB Cable Speakers: IP protection: Classification of radiation: 1. Speaker Lantern x1 2. USB cable charging cable x1 3. Remote control x1 4. User manual x1 -14 ̊ C to 35 ̊C 3pcs RGB+3pcs White, 7 Colours 0.2W max per piece 3.7V Lithium 1500mAh CR2025 (3V) 3.15~3.94 inches around 3 hours Light only up to 10hrs, 60% volume + Light around 5hrs Input: 5V 5W Speaker: IP44 USB cable: IP20 EN 55032, EN55035, EN61000-3-2, EN61000-3-3 Battery Charging 1. Please charge the battery fully before first use. 2. Connect your USB adapter (Use Output 5V ONLY!) to the speaker using the charge port on the underside of the light. During battery charging the indicator will be red. 3. Charge the speaker until the indicator light is green. Cover the charge port after it is fully charged. 4. After the battery has been charged, turn on the speaker using the ON/OFF button on the underside. The indicator should be blue. Then follow Bluetooth function instructions. NOTE: 1.The built-in battery is not replaceable. Please do not remove or replace it in the trash. If you must dispose of this speaker, bring it to your local recycling center. 2. Disconnect the external adapter from the charge port when not in use or when the speaker is fully charged. ON/OFF Charge Port 11 Bluetooth Function TROUBLESHOOTING 1. Make sure the battery is fully charged before attempting to connect the first time. 2. For stereo sound, it is possible to connect and pair up to 2 speakers to your device at the same time. 3. To connect the 1st speaker, press the ON/OFF button on the bottom of the speaker. There will be an audible activation beep and the blue indicator light will flash. PAIRING Max. 2pcs: 1) To connect with the 2nd speaker, press and hold the ON/OFF button on both speak- ers. You will hear a beep sound from the speakers. The one on which the Bluetooth indicator light flashes rapidly, will be the main unit. The other one will flash slowly, to become the secondary unit. 2) Now repeat Point 4 above to connect the Bluetooth on your phone. Once connected, the Bluetooth indicator light of the main speaker will stay blue. Both indicator lights will turn off automatically when music is playing. 3) To cancel the pairing, press and hold the ON/OFF button until a beep is heard. 4) To turn off the Bluetooth function, press the ON/OFF button. 1. Under Pairing mode, short press the ON/OFF button on the main unit. The second- ary unit’s music will be of f but the light is on; Turn of f the secondary unit, the main unit’s music and light will keep working individually and out of the pairing mode in 10 seconds. 2. To switch the Main unit setting, disconnect the Bluetooth in your device list firstly and then long press the ON/OFF on the new unit that you want to be the main unit. 3. If your Bluetooth device is more than 30ft away from the main speaker, they will disconnect. If you move the main speaker within 30ft, then they can be paired automat- ically and resume playing music. If you move the secondary speaker more than 30ft(10 m) away from Bluetooth device and within 19ft of the main speaker, the secondary can still play music. If you move secondary more than 19ft away from the main unit, it can not play music. They can pair automatically and play music again when you move it back within 19ft. 4. This LED BT Speaker Light has a memory storage function (if the batteries are not fully exhausted), when you turn on speaker, the light and speaker will maintain the same settings and pairing as the last time used. If the battery is exhausted there will be no memory storage function and you will need to pair the speakers. 4. On your phone/smart device, turn Bluetooth to ON and select "KBPB Speaker Lantern" from the device list. Once your device is connected, you will hear a second audible beep from the speaker and the indicator light will be blue. 2 SETTING TIMER The Timer function allows the product to automatically turn of f after a set amount of time. In order to set the timer, press the TIME Button (located on the Remote Control) once to change color, each color indicates a dif ferent Timer Duration. The Speaker will stay lit the LED Color that is chosen for the entire Timer Duration. Follow the Guide Below: LED Color Red Green Blue Yellow Light Blue Pink Timer Duration 30 min. 60 min 90 min 120 min. 150 min. 180 min. Note: To deactivate the Timer, Press the ON/OFF Button Remote control Before using the remote control remove the small plastic sheet from the battery cover. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Brightness Up Brightness Down LED ON/OFF Bluetooth-See CONNECTING VIA BLUETOOTH Red LED Green LED Blue LED Manually Switch LED Color Yellow LED Light Blue LED Pink LED Warm White LED Warm LED-Increase White Previous Track Warm LED-Decrease White Flash-Dancing LED Colors along with Music Volume Down Play/Pause Volume Up Time-See SETTING TIMER Next Track Smooth-Automatic Smooth Transition of LED Colors Remote control effective distance: 8-10 meters 13 14 17 21 8 1234 12 16 15 20 22 19 18 3 REPLACING REMOTE CONTROL BATTERIES • Removing the old battery by pressing the tab on the side of the battery cover and then sliding off the cover from the remote control. • Take notice of the positive (+) and negative(–) direction of the battery. Make sure that the new battery (CR2025) is inserted the right way. • Dispose of the old battery responsibly. Warnings and Cautions These products and their packaging are not toys; please keep out of reach of children. •The remote control and USB Cable/charger are not waterproof and must be kept in a dry location at all time. •Never charge the product…

Text truncated - open the document above for the full version.

Rev11/20/07 Powerbeauty(Dongguan)IndustrialCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationofFCCID:2AC37KBSLT0234 PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName BlockDiagram Schematics OperationalDescription Block SCH OperationalDescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrant forthisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,Wealsorequestingthe commissiontograntshort-termconfidentialityrequestonthefollowingattachmentsuntil180 daysaftertheGrantDateofEquipmentAuthorizations. ExhibitTypeFileName ManualUsermanual Sincerely, JohnsonXu 2020-11-16

Power beauty (Dong guan) Industrial Co., Ltd. Declaration on model difference We the undersigned hereby confirm that these models are identical, and all models have the same RFmodule and antenna, PCB layout , schematics and component.Only different on model number and color of appearance. Production nameTrademarkFCCModel no. Portable Speaker LanternN/A2AC37KBSLT0234KB-LT002-001, PBB-1420S, KB-SL002-301, PBG-1620S, KB-SL003-401, PBG-2131S, KB-SL004-001, PBG-1837S, KB-SL005-001, PBG-2433S Confirmed by: Johnson Xu 2020-11-16

FCCID:2AC37KBSLT0234

52 mm 18 mm Portable Speaker Lantern KB-LT002-001 Po No: 11-19179 Battery: 3.7V Lithium 1500mAh LEDs: 3pcs RGB+3pcs White, 7 Colors DC 5V1A USB, 5W Speaker FCC ID: 2AC37KBSLT0234 Imported By – Forward Industries, 33401. U.S.A Made in China Portable Speaker Lantern KB-LT002-001 Po No: 11-19179 Battery: 3.7V Lithium 1500mAh LEDs: 3pcs RGB+3pcs White, 7 Colors DC 5V1A USB, 5W Speaker FCC ID: 2AC37KBSLT0234 Imported By – Forward Industries, 33401. U.S.A Made in China

FCCID:2AC37KBSLT0234 ANT

RFEXPOSUREEVALUATION EUTSpecification EUTPortableSpeakerLantern ModelNumberKB-LT002-001,PBB-1420S,KB-SL002-301,PBG-1620S, KB-SL003-401,PBG-2131S,KB-SL004-001,PBG-1837S, KB-SL005-001,PBG-2433S FCCID2AC37KBSLT0234 Antennagain(Max)0dBi OperationFrequency2402-2480MHz InputRatingDC5Vfromadapter,DC3.7VBattery ClassificationPer StipulatedTestStandard §15.247(i),§2.1093 KindofDevice:BluetoothVer.5.0 ModulationGFSK,π/4-DQPSK Max.outputpower4.32dBm(0.002704W) TestRequirement: RFEXPOSUREEVALUATION AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeusedto evaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF)Radiationas specifiedin§1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) Power Density(mW/cm 2 ) Average Time (A)LimitsforOccupational/ControlExposures 300-1500----F/3006 1500-100000----56 (B)LimitsforGeneralPopulation/UncontrolExposures 300-1500----F/15006 1500-100000----130 1Friistransmissionformula:Pd=(Pout*G)\(4*pi*R 2 ) Where Pd=PowerdensityinmW/cm 2 Pout=outputpowertoantennainmW G=Numericgainoftheantennarelativetoisotropicantenna Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainofthendtotalpowerinputto theantenna,throughthecalculation,wewillknowthedistancewheretheMPElimitis reached. 2MeasurementResult Antennagain:0dBi BTDSS: Signature: SamLv Date:2020-11-22 Transmit Frequen cy(MHz) Mode Measur ed Power (dBm) Tune upPowe r (dBm) Max tuneup power( dBm) Output Peak power (mW) Ant. Gain (dBi) Ant. Gain (nume ric) Powerdensity at20cm(mW/ cm2) Power densit y Limits (mW/ cm2) 2.402GFSK1.71 2±13 1.995010.0003969 1 2.441GFSK3.86 3±14 2.512010.0004997 1 2.480GFSK4.32 4±15 3.162010.0006291 1 2.402 Π/4-DQP SK -0.67 0±11 1.259010.0002505 1 2.441 Π/4-DQP SK 2.13 2±13 1.995010.0003969 1 2.480 Π/4-DQP SK 2.72 3±14 2.512010.0004997 1

ReportNo.ES200831004WPage 1 of 66 Ver.1.0 TESTREPORT ProductName ： PortableSpeakerLantern ModelNumber ： KB-LT002-001,PBB-1420S,KB-SL002-301, PBG-1620S,KB-SL003-401,PBG-2131S, KB-SL004-001,PBG-1837S,KB-SL005-001, PBG-2433S FCCID ： 2AC37KBSLT0234 Preparedfor:Powerbeauty(Dongguan)IndustrialCo.,Ltd. Address:No.1,EasternIndustryPark,ShujiuVillage,Changping Town,DongguanCity,China Preparedby:EMTEK(SHENZHEN)CO.,LTD. Address:Building69,MajialongIndustryZone,NanshanDistrict, Shenzhen,Guangdong,China Tel:(0755)26954280 Fax:(0755)26954282 ReportNumber:ES200831004W Date(s)ofTests:August31,2020toSeptember19,2020 Dateofissue:September19,2020 $二维码$ ReportNo.ES200831004WPage 2 of 66 Ver.1.0 VERIFICATIONOFCOMPLIANCE Applicant: Powerbeauty(Dongguan)IndustrialCo.,Ltd. Manufacturer: Powerbeauty(Dongguan)IndustrialCo.,Ltd. Factory: Powerbeauty(Dongguan)IndustrialCo.,Ltd. ProductDescription:PortableSpeakerLantern TradeMark:N/A ModelNumber: KB-LT002-001,PBB-1420S,KB-SL002-301,PBG-1620S, KB-SL003-401,PBG-2131S,KB-SL004-001,PBG-1837S, KB-SL005-001,PBG-2433S Weherebycertifythat: TheaboveequipmentwastestedbyEMTEK(SHENZHEN)CO.,LTD.Thetestdata,data evaluation,testprocedures,andequipmentconfigurationsshowninthisreportweremade inaccordancewiththeproceduresgiveninANSIC63.10-2013andtheenergyemittedby thesampleEUTtestedasdescribedinthisreportisincompliancewithconductedand radiatedemissionlimitsofFCCRulesPart15.247(2018). DateofTest: August31,2020toSeptember19,2020 Preparedby: LorenLuo/Editor Reviewer: TimDong/Supervisor Approved&AuthorizedSigner: LisaWang/Manager ReportNo.ES200831004WPage 3 of 66 Ver.1.0 ModifiedInformation VersionSummaryRevisionDateReportNo. Ver.1.0OriginalReport September19,2020 ES200831004W ReportNo.ES200831004WPage 4 of 66 Ver.1.0 TableofContents TESTREPORT ................................................................................................................................................................................ 1 1.GENERALINFORMATION ................................................................................................................................................... 6 1.1PRODUCTDESCRIPTION ................................................................................................................................................... 6 1.2TESTMETHODOLOGY ........................................................................................................................................................ 7 1.3TESTFACILITY ................................................................................................................................................................... 8 2.SYSTEMTESTCONFIGURATION ..................................................................................................................................... 9 2.1EUTCONFIGURATION ...................................................................................................................................................... 9 2.2EUTEXERCISE ................................................................................................................................................................. 9 2.3TESTPROCEDURE ............................................................................................................................................................. 9 2.4CONFIGURATIONOFTESTEDSYSTEM ............................................................................................................................ 10 3.SUMMARYOFTESTRESULTS ....................................................................................................................................... 11 4.DESCRIPTIONOFTESTMODES .................................................................................................................................... 12 5.TESTSYSTEMUNCERTAINTY ........................................................................................................................................ 13 6.CONDUCTEDEMISSIONSTEST ...................................................................................................................................... 14 6.1MEASUREMENTPROCEDURE: ........................................................................................................................................ 14 6.2TESTSET-UP(BLOCKDIAGRAMOFCONFIGURATION) ................................................................................................ 14 6.3MEASUREMENTEQUIPMENTUSED: ............................................................................................................................... 14 6.4MEASUREMENTRESULT: ................................................................................................................................................. 15 7.RADIATEDEMISSIONTEST ............................................................................................................................................. 19 7.1MEASUREMENTPROCEDURE ......................................................................................................................................... 19 7.2TESTSET-UP(BLOCKDIAGRAMOFCONFIGURATION) ............................................................................................... 21 7.3MEASUREMENTEQUIPMENTUSED: ................................................................................................................................ 22 7.4RADIATEDEMISSIONLIMIT .............................................................................................................................................. 23 7.5MEASUREMENTRESULT .................................................................................................................................................. 24 7.5RADIATEDMEASUREMENTPHOTOS: .............................................................................................................................. 29 8.CHANNELSEPARATIONTEST ..............................................…

Text truncated - open the document above for the full version.

FCCID:2AC37KBSLT0234