2AC8CUM565-3GWireless Infrared Scouting Camera Code Black(UM565-3G)

Page 1 2014 Code Black Wireless Infrared Scouting Camera: Code Black (UM565‐3G) Instruction Manual Watch the set up video on our website at: www.covertscoutingcameras.com Page 2 Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off Page 3 and on, the user is encouraged to try to correct the interference by one or more of the following measures: z Reorient or relocate the receiving antenna. z Increase the separation between the equipment and receiver. z Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this device not expressly approved by UOVision Technology (Shenzhen) Co., Ltd. may void the FCC authorization to operate this device. Note: The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. Page 4 RF exposure statement: The transmitter must not be co‐located or operated in conjunction with any other antenna or transmitter. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Page 5 Table of Contents Camera button control diagram: ............................. 7 Installing the batteries:............................................ 8 Formatting the SD card:......................................... 15 Understanding main screen info:........................... 25 Customizing the camera settings:.......................... 26 Setting the camera mode: ..................................... 27 Camera mode settings:.......................................... 27 Video mode settings: (Fig 21) ............................... 28 PIR tab:................................................................... 30 NET tab:.................................................................. 35 Controlling your camera using SMS:...................... 36 SYS tab:................................................................... 41 Viewing photos on the color display:..................... 46 Troubleshooting:.................................................... 48 Tricks and tips on field setup: ................................ 51 Covert Scouting Cameras Warranty:...................... 53 Covert Warranty Policy and Procedure: ................ 53 Covert International Warranty Policy and Procedure: ............................................................................... 55 Code Black Set Up on a MAC: ................................ 61 Page 6 Congratulations on your purchase of the 2014 Code Black Covert Scouting Camera! We truly value your business and will strive to provide you top quality customer service should you ever need help with any of our products. Check out our other products on our website at: www. covertscoutingcameras.com New for 2014 is the 3G (WCDMA) model. This will allow for better signal in more areas! We know the first big question you are going to have once you purchase your Code Black is, “How do I get it set up to work over the cellular network?” This is very easy if you follow the steps laid out for you in this manual starting on the following pages. We hope you enjoy hassle free performance from this quality product for years to come. Covert Scouting Cameras, Inc. 4338 Greenridge Spa Road Lewisburg, KY 42256 Page 7 Camera button control diagram: Play Antenna Color LCD Navigation arrows Select/OK Menu Selector switch SIM card slot Delete Aux battery jack USB SD card slot Figure 1 Page 8 Installing the batteries: Your Code Black can function short term on 4‐AA batteries. Improved battery life on 8‐AA, but we suggest you use 12‐AA batteries to get the most out of your cameras battery life. Using Covert rechargeable NiMH, 2300mAh, AA batteries can extend the battery life significantly. Install the batteries by sliding the top battery in to the sleeve first, then depressing the spring with the other battery and snapping down in place. Pay attention to the (+) or (‐) molded into each sleeve to determine if you insert the positive or negative end into the sleeve first. Negative battery terminal always contacts the spring. (Fig. 2) Figure 2 Page 9 Purchasing your SIM card: The Code Black is designed to send the photos via MMS or DATA through SIM card technology over the cellular network to any phone # and/or email instantly once the photo is taken. You will have to purchase a texting package from any GSM (WCDMA) provider to set up your wireless feature to send to a phone # as a text. For the text package, you can select to send images to your phone, email, or both. To send to your email only, you can purchase the data package only, however, it will NOT send via MMS as a text message. This camera will function as a regular trail camera if the SIM card is not active. …

Text truncated - open the document above for the full version.

UOVision Technology (HONGKONG) Co., Ltd UNIT A3, 9/F SILVER INTERNATIONAL TOWER, 707-713 NATHAN ROAD, MONGKOK, KOWLOON, HONGKONG TEL: 86-755- 86528612 FAX: 86-755- 86366095 Rev 11/20/07 Confidentiality Letter Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AC8CUM565-3G Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram Block Diagram.pdf Schematics Schematics.pdf Operation Description Operation Description.pdf Tune up procedure Tune up procedure.pdf BOM BOM.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Shen Xia /Manager

UOVision Technology (HONGKONG) Co., Ltd UNIT A3, 9/F SILVER INTERNATIONAL TOWER, 707-713 NATHAN ROAD, MONGKOK, KOWLOON, HONGKONG TEL: 86-755- 86528612 FAX: 86-755- 86366095 DOC ATTESTATION LETTER FCC ID: 2AC8CUM565-3G Date: Oct. 14, 2014 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: I, the undersigned, hereby attest to the fact that I will apply the Declaration of Conformity procedure to the computer peripheral. I understand the following FCC requirements: 1. Devices subject to the DoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Test facilities located in countries, where the U.S. does not have an operational Telcom MRA are not recognized by the FCC to test for the DoC procedure. 3. Pt 2.1077 contains the list of information that must be included in the Declaration of Conformity, which must be supplied with each product sold. The DoC compliance info shall be included in the User’s Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(c)(2), the responsible party is either the Manufacturer or if the product is imported the Importer. Sincerely, Shen Xia /Manager

External Photos of EUT

FCC ID Label Information 1. Label location: 2. FCC ID Label: UOVision Technology (HONGKONG) Co., Ltd Wireless Infrared Scouting Camera: Code Black (UM565-3G) Model: Code Black (UM565-3G ) FCC ID: 2AC8CUM565-3G

Internal Photos of EUT

Shenzhen CTL Testing Technology Co., Ltd. Tel: +86-755-89486194 Fax: +86-755-26636041 TEST REPORT FCC Part 22 Subpart H / Part 24 Subpart E Report Reference No......................: CTL1407291808-WF Compiled by ( position+printed name+signature)..: File administrators Jacky Chen Name of the organization performing the tests ( position+printed name+signature)..: Test Engineer Tracy Qi Approved by ( position+printed name+signature)..: Manager Tracy Qi Date of issue.....................................: Sept. 13, 2014 Test Firm..........................................: Shenzhen CTL Testing Technology Co., Ltd. Address.............................................: Floor 1-A, Baisha Technology Park, No. 3011, Shahexi Road, Nanshan, Shenzhen 518055 China. Applicant’s name............................: UOVision Technology (HONGKONG) Co., Ltd Address.............................................: UNIT A3, 9/F SILVER INTERNATIONAL TOWER, 707-713 NATHAN ROAD, MONGKOK, KOWLOON, HONG KONG Test specification: Standard ...........................................: FCC CFR Title 47 Part 2, Part 22H, Part 24E EIA/TIA 603-C: 2004 Master TRF.......................................: Dated 2011-01 Shenzhen CTL Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTL Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description.................... : Wireless Infrared Scouting Camera: Code Black (UM565-3G) FCC ID.......................................: 2AC8CUM565-3G Trade Mark .......................................: UOVision Model/Type reference.......................: Code Black (UM565-3G) GSM/WCDMA Transmit ...........................................: 2G:GPRS 850: 824~849MHz, GPRS 1900: 1850~1910MHz 3G:WCDMA Band II: 1850-1910MHz, WCDMA Band V: 824~849MHz Receive ............................................: 2G:GPRS 850: 869~894MHz, GPRS 1900: 1930~1990MHz 3G:WCDMA Band II: 1930~1990MHz, WCDMA Band V: 869~894MHz Release Version .............................: 2G:R99 3G:UMTS FDD: Rel-5 V1.0 Page 2 of 80 Report No.: CTL1407291808-WF Type of modulation...........................: 2G: GMSK for GPRS, 8PSK for EDGE 3G: QPSK GPRS Type ......................................: Class B GPRS Class ...................................: Class 12 Antenna Gain ...................................: 2.0 dBi for GPRS850 and WCDMA Band V 2.5 dBi for GPRS1900 and WCDMA Band II Antenna type ....................................: External IMEI ..................................................: 012813002121335 Result................................................: Positive V1.0 Page 3 of 80 Report No.: CTL1407291808-WF T E S T R E P O R T Test Report No. : CTL1407291808-WF Sept. 13, 2014 ______________________________________________________________________________________________ Date of issue Equipment under Test : Wireless Infrared Scouting Camera: Code Black (UM565-3G) Model /Type : Code Black (UM565-3G ) Applicant : UOVision Technology (HONGKONG) Co., Ltd Address : UNIT A3, 9/F SILVER INTERNATIONAL TOWER, 707-713 NATHAN ROAD, MONGKOK, KOWLOON, HONG KONG Manufacturer UOVision Technology (Shenzhen) Co., Ltd. Address 3rd Floor, East Wing, the 4th Building, ZhongGuan HongHualing Industrial Zone, 1268# Liuxian BLVD, Nanshan District, Shenzhen, China 518055 Test Result according to the standards on page 5: Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. V1.0 Page 4 of 80 Report No.: CTL1407291808-WF Contents 1 . TEST STANDARDS.......................................................................5 2 . SUMMARY...................................................................................6 2.1. General Remarks .........................................................................................................................................6 2.2. Equipment Under Test ................................................................................................................................6 2.3. Short description of the Equipment under Test (EUT) ............................................................................6 2.4. EUT operation mode ...................................................................................................................................6 2.5. EUT configuration .......................................................................................................................................7 2.6. Related Submittal(s) / Grant (s)..................................................................................................................7 2.7. Modifications ...............................................................................................................................................7 3 . TEST ENVIRONMENT ....................................................................8 3.1. Address of the test laboratory ...................................................................................................................8 3.2. Test Facility ..................................................................................................................................................8 3.3. Environmental conditions ..........................................................................................................................8 3.4. Configuration of Tested System ................................................................................................................8 3.5. EUT Exercise Software .............................................................…

Text truncated - open the document above for the full version.

Test Setup Photos of the EUT