2ACC866310Pricer ShelfVision

ShelfVision User manual Intended use Pricer ShelfVision is a wireless camera designed for integration with the Pricer store automation system. The camera is mounted in the store aisles and can be instructed to take pictures of the opposite shelves. Using image processing and AI the system can then e.g., detect if there is a need of replenishing the shelves with goods. The ShelfVision can also be used for Pricer Label positioning as it can communicate with the surrounding Pricer Labels and then send the location information to the Pricer System. Installation Attach the ShelfVision to the holder. Link the ShelfVision to the system by scanning the barcode with the Pricer SmartAPP. Successful linking is indicated in the SmartAPP and a short blink of the ShelfVision status LED. 1 2 Additional information about the ShelfVision can be found at partner.pricer.com. 34 Waste of electrical and electronic equipment must not be disposed as unsorted municipal waste (RoHS and WEEE). Dispose the product separately in accordance with applicable federal, state and local regulations. Disposal Specifications •Model name: PricerShelfVision •Model number: 66310-00 •Size: 86 x 34 x 32 mm •Weight: 100 g •Operating temp.: +5°C –+40°C •51410 Adjustable Camera Holder •51404 Protective Adjustable Camera Holder •51405 Removal Tool Accessories Contact information Västra Järnvägsgatan 7 SE-111 64 Stockholm, Sweden www.pricer.com Version: 1553-55161 Rev G © 2021 Pricer AB, All rights reserved FCC compliance statement Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC‘s RF radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada certification/Certification Industrie Canada ThisdevicecomplieswithPart15oftheFCCRulesandIndustryCanadalicence-exemptRSSstandard(s).Operationissubjecttothe followingtwoconditions: (1)thisdevicemaynotcauseinterference,and(2)thisdevicemustacceptanyinterference,includinginterferencethatmaycause undesiredoperationofthedevice. This Class B digital apparatus complies with Canadian ICES-003. This equipment complies with FCC and IC RF radiation exposure limits set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance of 20cm （may be adjusted according to actual calculation result）between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. French Le présent appareil est conforme aux Partie 15 des règlements de la FCC et CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pasproduire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Cet appareil est conforme aux limites d’exposition au rayonnement RF stipulées par la FCC et IC pour une utilisation dans un environnement non contrôlé. Les antennes utilisées pour cet émetteur doivent être installées et doivent fonctionner à au moins 20 cm de distance des utilisateurs et ne doivent pas être placées près d’autres antennes ou émetteurs ou fonctionner avec ceux-ci. Les installateurs doivent s’assurer qu’une distance de 20 cm sépare l’appareil (à l’exception du combiné) des utilisateurs. CE This equipment is not suitable for use in locations where children are likely to be present. Certification Hereby PricerAB declares that the radio equipment type ShelfVision is in compliance withDirective 2014/53/EU. The full text of the EU declaration of conformity is available at the following web address: partner.pricer.com United Kingdom This equipment is not suitable for use in locations where children are likely to be present. Certification Hereby PricerAB declares that the radio equipment type ShelfVision is in compliance withThe Radio Equipment Regulations 2017. The full text of the UK declaration of conformity is available at the following web address: partner.pricer.com Compliance StandardFrequency bandMax. output power 802.11b/g/n:2412MHz -2472MHz17.55dBm 802.11a/n:5180MHz -5700MHz17.75dBm FCC ID: 2ACC866310 IC: 20234-66310

Title: Created date: Page: SGS_FCC_agent_auth_letter 18-Jan-2021 1(1) Date: January 18, 2021 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: 2ACC866310 To whom it may concern: We, the undersigned, hereby authorize SGS Hong Kong Ltd. and YW Yung in SGS Hong Kong Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Pricer AB. This authorization is valid until further written notice from the applicant. Name (Printed): Hakan Sjodin Title: Project Manager Signature: On behalf of Company: Pricer AB Telephone: +46(0)7 081 080 65

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Pricer AB Address Pricer AB, Box 215, SE-101 24 Stockholm, Sweden Grantee Code 2ACC8 FCC ID 2ACC866310 Authorized Contact Name Hakan Sjodin Contact Email [email protected] Contact Phone +46(0)7 081 080 65 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 29 April 2021 Print Name: Hakan Sjodin Title: Project Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Title: Created date: Page: SGS_FCC_Confidentiality_request_2ACC866310 29 April 2021 1(1) To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Pricer AB Pricer AB, Box 215, SE-101 24 Stockholm, Sweden Regarding: Confidentiality Request regarding application for FCC ID 2ACC866310 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Name (Printed): Hakan Sjodin Project Manager Pricer AB

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 External Photos for SZCR2103020220AT FCC ID: 2ACC866310 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4

Comments Scale Units Format - 1:1 mm A4 Prepared Product label position Pricer ShelfVision Fredrik Tjerneld/210506 Reviewed Language - EN/SV Approved Page - 1 of 1 Document id. Revision A

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 6 Internal Photos for SZCR2103020220AT FCC ID: 2ACC866310 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 6 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 6

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210302022003 Page : 1 of 7 Keny Xu EMC Laboratory Manager 1 Cover page RF Exposure Evaluation Report Application No.: SZCR2103020220AT Applicant: Pricer AB Address of Applicant: Pricer AB, Box 215, SE-101 24 Stockholm, Sweden Manufacturer: Pricer AB Address of Manufacturer: Västra Järnvägsgatan 7, SE-111 64 Stockholm, Sweden Factory: ABILITY TECHNOLOGY (DONG GUAN) Co., Ltd Address of Factory: Hua Nan Industri Park, Lia Bu Park. Dongguan, Province, China Equipment Under Test (EUT): EUT Name: Battery powered WIFI-camera (IOT) Model No.: 66310-00, 66310-01, 66310-02, 66310-03, 66310-04, 66310-05, 66310-06, 66310-07 ♣ ♣ ♣♣ ♣ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade mark: Pricer Shelf View Camera FCC ID: 2ACC866310 Standards: 47 CFR Part 1.1307 (2016) 47 CFR Part 1.1310 (2016) Date of Receipt: 2021-03-25 Date of Test: 2021-04-15 to 2021-04-21 Date of Issue: 2021-04-25 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210302022003 Page : 2 of 7 2 Version Revision Record Version Chapter Date Modifier Remark 01 2021-04-25 Original Authorized for issue by: Bill Chen/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210302022003 Page : 3 of 7 3 Contents Page 1 COVER PAGE ........................................................................................................................................ 1 2 VERSION ................................................................................................................................................ 2 3 CONTENTS ............................................................................................................................................ 3 4 GENERAL INFORMATION ..................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF EUT ............................................................................................................. 4 4.2 TEST LOCATION .................................................................................................................................... 5 4.3 TEST FACILITY ...................................................................................................................................... 5 4.4 DEVIATION FROM STANDARDS ................................................................................................................. 5 4.5 ABNORMALITIES FROM STANDARD CONDITIONS ........................................................................................ 5 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER .............................................................................. 5 5 RF EXPOSURE EVALUATION ............................................................................................................... 6 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ............................................................................................. 6 5.1.1 Limits .......................................................................................................................................... 6 5.1.2 Test Procedure ........................................................................................................................... 6 5.1.3 EUT RF Exposure Evaluation ...................................................................................................... 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210302022003 Page : 4 of 7 4 General Information 4.1 General Description of EUT Power supply: Battery Model: ER1450SM-2 Output: DC 3.6 V And DC 3 V (‘CR 2032’ size battery x 1) For 2.4G Operation Frequency: 802.11b/g/n(HT20): 2412MHz to 2462MHz;802.11n(HT40): 2422MHz to 2452MHz Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK);802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) Number of Channels: 802.11b/g/n(HT20):11;802.11n(HT40):7 Channel Spacing: 5MHz Antenna Type: Monopole Antenna Gain: -1.2dBi For 5G： Operation Frequency (20MHz): U-NII-1: 5180-5240MHz; U-NII-2A: 5260-5320MHz; U-NII-2C: 5500- 5700MHz Operation Frequency (40MHz): U-NII-1: 5190-5230MHz; U-NII-2A: 5270-5310MHz; U-NII-2C: 5510- 5670MHz Modulation Type: 802.11a: OFDM (64QAM, 16QAM, QPSK, BPSK); 802.11n: OFDM (BPSK, QPSK, 16QAM, 64QAM) Channel Spacing: 802.11a/n(HT20): 20MHz; 802.11n(HT40)/:40MHz DFS Function: Slave without Radar detection TPC Function: Support TPC function Antenna Type: Monopole Antenna Gain: -1.0dBi Remark: Model No.: 66310-00, 66310-01, 66310-02, 66310-03, 66310-04, 66310-05, 66310-06, 66310-07 Only the model 66310-00 was tested, since according to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for all the above models, with only difference on different on model No, color and optical lens size. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210302022003 Page : 5 of 7 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shi…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210302022001 Page: 1 of 129 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2103020220AT Applicant: Pricer AB Address of Applicant: Pricer AB, Box 215, SE-101 24 Stockholm, Sweden Manufacturer: Pricer AB Address of Manufacturer: Västra Järnvägsgatan 7, SE-111 64 Stockholm, Sweden Factory: ABILITY TECHNOLOGY (DONG GUAN) Co., Ltd Address of Factory: Hua Nan Industri Park, Lia Bu Park. Dongguan, Province, China Equipment Under Test (EUT): EUT Name: Battery powered WIFI-camera (IOT) Model No.: 66310-00, 66310-01, 66310-02, 66310-03, 66310-04, 66310-05, 66310-06, 66310-07 ♣ ♣ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade mark: Pricer Shelf View Camera FCC ID: 2ACC866310 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2021-03-25 Date of Test: 2021-04-15 to 2021-04-21 Date of Issue: 2021-04-25 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210302022001 Page: 2 of 129 Revision Record Version Chapter Date Modifier Remark 01 2021-04-25 Original Authorized for issue by: Bill Chen/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210302022001 Page: 3 of 129 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Remark: Model No.: 66310-00, 66310-01, 66310-02, 66310-03, 66310-04, 66310-05, 66310-06, 66310-07 Only the model 66310-00 was tested, since according to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for all the above models, with only difference on different on model No, color and optical lens size. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210302022001 Page: 4 of 129 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 6 4.1 DETAILS OF E.U.T. ......................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 6 4.3 MEASUREMENT UNCERTAINTY ......................................................................................................... 6 4.4 TEST LOCATION ............................................................................................................................. 7 4.5 TEST FACILITY ............................................................................................................................... 7 4.6 DEVIATION FROM STANDARDS ......................................................................................................... 7 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 7 5 EQUIPMENT LIST ............................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................10 6.1 ANTENNA REQUIREMENT ................................................................................................................10 6.1.1 Test Requirement: ..................................................................... Error! Bookmark not defined. 7 RADIO SPECTRUM MATTER TEST RESULTS .................................................................................11 7.1 CONDUCTED PEAK OUTPUT POWER ................................................................................................11 7.1.1 E.U.T. Operation .....................................................................................................................11 7.1.2 Test Mode Description ............................................................................................................11 7.1.3 Test Setup Diagram ................................................................................................................12 7.1.4 Measurement Procedure and Data ..............................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Setup Photos for SZCR2103020220AT FCC ID: 2ACC866310 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 Photographs RF Conducted Radiated Spurious Emissions Below 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3 Radiated Spurious Emissions Above 1GHz