2ACIXT7Wireless Portable Speaker

Firmware version X.XX.XX Operation may differ from other firmware versions T7 DRAFT 2 ENGLISH www.bowers-wilkins.com Welcome to Bowers & Wilkins and T7 Thank you for choosing Bowers & Wilkins. When John Bowers first established our company he did so in the belief that imaginative design, innovative engineering and advanced technology were keys that could unlock the enjoyment of audio in the home. His belief is one that we continue to share and it inspires every product we design. Your T7 can be used to: • Play music streamed from an iOS, Android or Windows Mobile device using Bluetooth wireless technology. • Play music using a wired connection from any device incorporating an analogue audio output – a headphone socket for example. The T7 is powered by a lithium-ion rechargeable battery pack able, when fully charged, to provide up to 8 hours playback time at average volume levels. This manual will tell you everything you need to know to get the most from your T7. It begins by describing the contents of the T7 carton. 3 ENGLISH 1. T7 Carton Contents • T7 speaker. • T7 power supply. • Regional plugs adapters. • Document pack containing a Quick Start Guide, warranty information and statutory safety warnings. Environmental Information This product complies with international directives, including but not limited to the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment, the Registration, Evaluation, Authorisation and restriction of Chemicals (REACH) and the disposal of Waste Electrical and Electronic Equipment (WEEE). Consult your local waste disposal authority for guidance on how properly to recycle or dispose of this product. 2. Getting to know the T7 Your T7 is designed for high performance, portable and convenient music. Once switched on via the Standby button on its right hand side, it is controlled via Bluetooth, Play/Pause, Volume + and Volume – buttons on it’s top panel. A blue indicator adjacent to the Bluetooth button displays Bluetooth connection state and a column of white indicators above the Standby button displays battery charge level and a variety of other information. T7 also provides audible feedback for some control commands and events. Note: T7 is not waterproof and is not intended for use in high humidity environments such as bathrooms, swimming pools and saunas. Connection sockets on the back of the T7 comprise a power supply input, a 3.5mm jack analogue audio input, and a micro-USB socket used for firmware updates. A pin-hole reset button is also located on the back of the T7. Note: The T7 USB socket is present for firmware updates and service use only. It cannot be used for any other purpose. Diagram 1 illustrates T7, its buttons and connection sockets. Diagram 1 Buttons and connection sockets. Bluetooth pairingPlay/PauseVolume downVolume up POWERAUXUSBRESET On / Off / Check BatteryAuxilaryService onlyResetPower 4 ENGLISH Diagram 4 Battery life indicator 3. Battery charging The T7 battery will be discharged when you first unpack it. To charge the T7 battery follow the steps described below. • Select the appropriate regional plug adapter for the mains outlet socket in your territory and clip it to the power supply body as illustrated in Diagram 2. • Plug the T7 power supply into a mains outlet socket and connect its output cable to the T7 power input socket. This is illustrated in Diagram 3. If the mains outlet socket incorporates an isolator, switch it on. Once the T7 is connected to power its battery will begin to charge. A full charge from a fully discharged state will take approximately four hours. It is best initially to leave T7 connected to power until it is fully charged although it can be used while it is charging. T7 will provide audible feedback when it reaches full battery charge. When the Standby button is briefly pressed (< 3s) the column of five indicators on the right-hand side of T7 will illuminate for short period to indicate the state of battery charge. The sequence of indicator illumination depends on the level of charge. At between 0% and 10% charge the bottom indicator will flash rapidly with the indicator directly above blinking quickly and the three indicators above that blinking at decreasing rates. At between 10% and 20% charge the bottom indicator will blink quickly and the four indicators above it blink at decreasing rates. As the battery becomes fully charged, the indicators will, from bottom to top, switch from blinking to continual illumination until, at full charge, the first four indicators will be continuously illuminated with only the top one flashing. As the battery discharges with use, a similar, reverse sequence of illumination will occur. The T7 will provide audible feedback when battery falls below 20% and again when it falls below 10%. Diagram 4 illustrates all the indicator illumination sequences for battery charge and discharge levels. - Simplified diagram required (each LED = 20% of charge) Note: You can charge T7 at anytime independent of battery level. 4. Switching on and off To switch your T7 on or off press and hold the Power button for 3 second. T7 will provide audible feedback as it switches on. Note: If T7 is unused for more than 10 minutes it will automatically enter sleep mode. To wake T7 from sleep mode press either the Bluetooth or power button. An analogue audio signal input or Bluetooth audio stream will also wake T7. If T7 is unused for more than 20 minutes it will switch off automatically. If T7 has not been previously used or it is not within range of previously connected Bluetooth devices when first switched on, only its analogue jack input will be operational. See the following section of this manual for information on connecting to Bluetooth devices. Diagram 3 Selecting the appropriate adapter Diagram 2 Selecting the appropriate adapter POWE RAUX USBRESET POWE R AUX USBR ESET 100% 80% 60% 40% 20% 5 ENGLISH Diagram 5 Bluetooth setup 5. T7 audio inputs T7 can play audio either wi…

Text truncated - open the document above for the full version.

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 3 Report Version 1 Test Report No.: RF140327N027 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 3 Report Version 1 Test Report No.: RF140327N027 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 3 Report Version 1 Test Report No.: RF140327N027

Label loction

T7 Rating label COPYRIGHT 2014 SAP DOCUMENT NUMBER DATE 12/06/2014 DRAWN PART No. Screen print Cool Gray 8 C PRINT THIS VERSION

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 7 Report Version 1 Test Report No.: RF140327N027 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 7 Report Version 1 Test Report No.: RF140327N027 ANT Connector ANT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 7 Report Version 1 Test Report No.: RF140327N027 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 7 Report Version 1 Test Report No.: RF140327N027 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 5 of 7 Report Version 1 Test Report No.: RF140327N027 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 6 of 7 Report Version 1 Test Report No.: RF140327N027 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 7 of 7 Report Version 1 Test Report No.: RF140327N027

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 41 Report Version 1 Test Report No.: RF140327N027 TEST REPORT Applicant B&W Group Ltd Address Dale Road, Worthing, West Sussex, BN11 2BH, UK Manufacturer or Supplier B&W Group Ltd Address Dale Road, Worthing, West Sussex, BN11 2BH, UK Product Wireless Portable Speaker Brand Name Bowers & Wilkins Model T7 Additional Model & Model Difference N/A Date of tests Mar. 27 ~ May 05, 2014 The submitted sample of the above equipment has been tested according to the requirements of the following standards: FCC Part 15, Subpart C, Section 15.249(2012-10) CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Venless Long Project Engineer / EMC Department Approved by Glyn He Supervisor / EMC Department Date: May 08, 2014 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 41 Report Version 1 Test Report No.: RF140327N027 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 4 1 SUMMARY OF TEST RESULTS.................................................................................................... 5 2 MEASUREMENT UNCERTAINTY................................................................................................. 5 3 GENERAL INFORMATION ............................................................................................................ 6 3.1 GENERAL DESCRIPTION OF EUT ........................................................................................... 6 3.2 DESCRIPTION OF TEST MODES ............................................................................................. 7 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................ 9 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................................... 9 4 TEST TYPES AND RESULTS...................................................................................................... 10 4.1 CONDUCTED EMISSION MEASUREMENT ........................................................................... 10 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .................................................... 10 4.1.2 TEST INSTRUMENTS ......................................................................................................... 10 4.1.3 TEST PROCEDURES ...........................................................................................................11 4.1.4 DEVIATION FROM TEST STANDARD .................................................................................11 4.1.5 TEST SETUP ....................................................................................................................... 12 4.1.6 EUT OPERATING CONDITIONS ......................................................................................... 12 4.1.7 TEST RESULTS ................................................................................................................... 13 4.2 RADIATED EMISSION MEASUREMENT ................................................................................ 15 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT.......................................................... 15 4.2.2 TEST INSTRUMENTS ......................................................................................................... 16 4.2.3 TEST PROCEDURES .......................................................................................................... 17 4.2.4 DEVIATION FROM TEST STANDARD ................................................................................ 18 4.2.5 TEST SETUP ....................................................................................................................... 18 4.2.6 EUT OPERATING CONDITIONS ......................................................................................... 18 4.2.7 TEST RESULTS ................................................................................................................... 19 4.3 20dB BANDWIDTH MEASUREMENT...................................................................................... 32 4.3.1 LIMITS OF 20dB BANDWIDTH MEASUREMENT.............................................................. 32 4.3.2 TEST INSTRUMENTS................................…

Text truncated - open the document above for the full version.