2ACNGQR1001TABLET PC

1. Introducing the Device TABLET PC QR1001 1 Congratulations on your purchase of this 10.1” tablet. This tablet creates a great experience surfing the web and provides a wide variety of mobile computing at your fingertips. Built around the Google Android 4.4.2 operating system, gives you access to thousands of applications to enhance your mobile experience. With integrated wireless access and a highly responsive touchscreen, you can read books and newspapers on the go; access the latest news, sports, and weather; manage your multimedia and business files; browse the web, and lots more. 2. Introducing the Device This user manual contains important safety instructions and information for proper use of the device. Please follow the instructions in this manual carefully. 2 • It using this product in the following environments: high and low temperatures, humid environments, dusty environments, areas with strong magnetic fields and prevent long‐term exposure to the sun. In particular please it leaving the device in the car during summer if the doors are closed. Please don’t be in high temperature, especially in summer don't put the device in the car when Windows are closed. • It shocks and do not let the device fall, as otherwise it may cause damage to the device. • To clean the product, gently wipe the product using a moist cotton cloth; the use of other chemical cleaning is prohibited unless they are specifically designed for this purpose. This product should be kept away from water droplets splashes, so cups filled with liquids should not be placed near the product. Do not use alcohol, thinners or petrol to clean the display. • If using the headset for a long time, high volume may cause permanent damage to hearing. • When using the touch screen the following conditions must be followed: 9 For optimal use of the touch screen, remove the screen protection film before using your device. 9 To avoid scratching the touch screen, do not use sharp tools. 9 Do not allow the touch screen to come into 3 contact with other electrical devices. Electrostatic discharges can cause the touch screen to malfunction. 9 Do not allow the touch screen to come into contact with water. The touch screen may malfunction in humid conditions or when exposed to water. 9 Your touch screen has a layer that detects small electrical charges emitted by the human body. For best performance, tap the touch screen with your fingertip. The touch screen will not react to touches of sharp tools, such as a stylus or pen which could damage and mark the screen. • When charging the tablet the following conditions should be adhered to: 9 Please use only the supplied battery, charger and accessories, the use of any other type of product would be a breach of warranty regulations, and may be dangerous. 9 Do not drop or cause an impact to the charger or the battery. 9 Do not handle a damaged or leaking Lithium Ion (Li‐Ion) battery. For safe disposal of your Li‐Ion batteries, contact your nearest authorised recycling centre. 9 Handle and dispose of batteries and chargers with care. Never dispose of batteries or devices in a fire. Follow all local regulations when disposing of used batteries or devices. 4 9 Never place batteries or devices on or in heating devices, such as microwave ovens, cookers, or radiators. Batteries may explode when overheated. 9 Never crush or puncture the battery. Avoid exposing the battery to high external pressure, which can lead to an internal short circuit and overheating. 9 USB is only for use of transferring of data and not recharging the device. 3. Boxed Contents Energy Tablet 10.1” Neo 2 User Manual USB cable 2.0 High‐speed to connect the PC USB‐HOST cable to connect external USB AC/DC (Europlug) 100‐240V AC 50‐60Hz power adapter 5 4. Hardware Specifications CPU RK3188 Operating System Google Android 4.4.2 Memory 1GB Storage 8GB Display 10.1'' TFT Touch Panel (16:9; Resolution 1280*800 ) Audio Devices Built‐in speaker & microphone Battery 2*7000mAh/3.7V Power Adapter DC Output 5V/2A G‐ Sensor Automatic steering display screen Wi‐Fi 802.11 b/g supported BT V3.0 Camera 0.3 Mega Pixel ( front )Postposition 2M MicroSD Maximum 32GB supported 6 I/0 Micro SD card slot, Earphone jack, Reset, DC in, Mini USB Multimedia Video RM, RMVB, MKV, FLV, MPG, MP4, 3GP, DAT, MOV, H.264 Audio WMA, WAV, AAC, OGG, APE, FLAC, AC3 The company reserves the right to improve the product, product specification and design. The information given is subject to change without prior notice. 【Remark】All pictures in this manual is just for your reference only. 7 5. Overview 8 5.1 POWER Startup: Long Press and hold the power button, the system will enter the main interface. Shutdown: In the main menu interface, Press the power button about 5 seconds to shutdown, the system can hint "power off" option, Click "ok". You can safely shut down. Lock screen: Short press Power button to lock screen or unlock screen. 【Remark】When power is empty, system will shut down automatically. 5.2 Illegal turn off the device, restart will scan and restore the disk, it may take longer time to enter into system 5.3 Earphone jack: 3.5 mm standard earphone jack 5.4 TF ca rd: TF‐CARD slot: external T‐FLASH card 5.5 Mini USB: Mini USB jack: you can use it to connect the computer for data transmission, and external connection USB flash drive 5.6 Reset: When the Tablet is under the condition of the crash, use a small objects to short press RESET button, Tablet will be forced to shut down. 9 6. First Use 6.1 Battery management and charge Before first use, please check the device's battery is fully charged. If not connect the adaptor and apply power. The first two occasion’s full charge may take approximately 6 hours, after that it will reduce to around 4 hours to charge. 【Remark】: This tablet uses a Built‐in type polymer battery, Charge must be via standard adaptor (Input: AC100~240V 50/60Hz 0.3A. Output: DC5V/2A. During charging the battery icon will scroll until finished at…

Text truncated - open the document above for the full version.

Colmei Technology International Limited 2nd Floor, 8th Block,Dongfangming Industry park,33rd Baoan District,Shenzhen Date: Jan. 24, 2015 FCC ID: 2ACNGQR1001 Subject: Ad Hoc Mode Function Declaration To Whom it may concern, This device is acting as slave and operating in the 2.4 GHz (2412 – 2462 MHz) band.Ad Hoc function is supported but not able to operate on non-US frequencies.Please contact the one signed below or the authorized agent for this filing. Regards, Yours sincerely, Signatory Signature Name: Wilson Wan Title: Manager Tel: 86-755-33051999

Colmei Technology International Limited FCC Confidentiality Request To the FCC and FCC TCB handling this application for certification Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name Colmei Technology International Limited Addresss 2nd Floor, 8th Block,Dongfangming Industry park,33rd Baoan District City Shenzhen Country China request non-disclosure and confidential treatment for our certification under: Grantee Code Product Number FCC ID: 2ACNG QR1001 of the following materials submitted within this certification application: (please cross what is applicable, or add other documents) x Operational Description x Block Diagrams x Schematics Diagrams x Turn-up produrce Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Shenzhen 2015/01/30 Wilson Wan manager

This document cannot be reproduced except in full, without prior written approval of AIT. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. APPENDIX-A Photo 1 Photo 2 This document cannot be reproduced except in full, without prior written approval of AIT. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Photo 3 Photo 4 This document cannot be reproduced except in full, without prior written approval of AIT. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Photo 5 Photo 6

FCC ID LABELING AND LOCATION FCC ID Label FCC ID Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925) TABLET PC ENERGY SISTEM M/N: QR1001 FCC ID: 2ACNGQR1001 Colmei Technology International Limited . Made In China

This document cannot be reproduced except in full, without prior written approval of AIT. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Photo 7 Photo 8 This document cannot be reproduced except in full, without prior written approval of AIT. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Photo 9 Photo 10 This document cannot be reproduced except in full, without prior written approval of AIT. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Photo 11 Photo 12 This document cannot be reproduced except in full, without prior written approval of AIT. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Photo 13 Photo 14 ANT This document cannot be reproduced except in full, without prior written approval of AIT. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Photo 15 Photo 16 This document cannot be reproduced except in full, without prior written approval of AIT. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Photo 17 Photo 18 This document cannot be reproduced except in full, without prior written approval of AIT. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Photo 19 Photo 20 This document cannot be reproduced except in full, without prior written approval of AIT. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Photo 21 This document cannot be reproduced except in full, without prior written approval of AIT. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Photo 22 Photo 23 This document cannot be reproduced except in full, without prior written approval of AIT. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Photo 24 Photo 25 This document cannot be reproduced except in full, without prior written approval of AIT. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Photo 26 Photo 27

FCC ID: 2ACNGQR1001 RF EXPOSURE EVALUATION METHOD SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. FCC ID: 2ACNGQR1001 Maximum measured transmitter power. BT3.0 TX Mode Frequency Maximum Conducted Output Power（PK） Peak Output Power Test Channe (MHz) (dBm) (mW) CH00 2402 2.57 1.81 CH39 2440 2.43 1.75 CH78 2480 2.37 1.73 max. technical PK output power / 3.00 2.00 802.11b TX Mode Frequency Maximum Conducted Output Power（AV） Peak Output Power Test Channe (MHz) (dBm) (mW) CH1 2412 9.34 8.59 CH6 2437 9.14 8.20 CH11 2462 9.25 8.41 max. technical AV output power / 9.50 8.91 802.11g TX Mode Frequency Maximum Conducted Output Power（AV） Peak Output Power Test Channe (MHz) (dBm) (mW) CH1 2412 8.76 7.52 CH6 2437 8.73 7.46 CH11 2462 8.65 7.33 max. technical AV output power / 9.50 8.91 Remark: The best case gain of the antenna is 0dBi. 0 dBi logarithmic terms convert to numeric result is nearly 1 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance,mm)] · [√f(GHz)] FCC ID: 2ACNGQR1001 BT3.0 TX Mode Mode [(max. power of channel, including tune-up tolerance, mW) (min. test separation distance,mm)] [√f(GHz)] Result Limit CH00 2 5 √ 2.402 0.620 3 CH39 2 5 √ 2.440 0.625 3 CH78 2 5 √ 2.480 0.630 3 802.11b/g TX Mode Mode [(max. power of channel, including tune-up tolerance, mW) (min. test separation distance,mm)] [√f(GHz)] Result Limit CH1 8.91 5 √ 2.412 2.768 3 CH6 8.91 5 √ 2.437 2.782 3 CH11 8.91 5 √ 2.462 2.796 3 The test Result is less than 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. Conclusion: No SAR is required.

Report No.: E-F1501005-01 Page 1 of 52 Rev: None Asia Institute Technology (Dongguan) Limited No. 22, JinQianLing Street 3, JiTiGang Village HuangJiang Town, DongGuan, GuangDong, China. FCC RADIO TEST REPORT FCC ID: 2ACNGQR1001 Product： TABLET PC Trade Name： ENERGY SISTEM Model Name： QR1001 Serial Model： Neo 2, QR1002, QR1003, QR1004, QR1005, QR1006, QR1007, QR1008 Prepared for Colmei Technology International Limited 2nd Floor, 8th Block,Dongfangming Industry park,33rd Baoan District,Shenzhen Prepared by Asia Institute Technology (Dongguan) Limited No. 22, Jin QianLing Street 3, JiTiGang Village, HuangJiang Town, DongGuan, GuangDong, China. Report No.: E-F1501005-01 Page 2 of 52 Rev: None Asia Institute Technology (Dongguan) Limited No. 22, JinQianLing Street 3, JiTiGang Village HuangJiang Town, DongGuan, GuangDong, China. TEST RESULT CERTIFICATION Applicant’s name........ Colmei Technology International Limited Address ........................ 2nd Floor, 8th Block,Dongfangming Industry park,33rd Baoan District,Shenzhen Manufacture's Name... Shenzhen Crave Communication Co.,LTD Address ........................ 3rd Floor, 8th Block, Dongfangming Industry Park, 33rd Baoan District, Shenzhen Product description Product name .................TABLET PC Model and/or type reference ..................... QR1001 Additional Model ........... Neo 2, QR1002, QR1003, QR1004, QR1005, QR1006, QR1007, QR1008 Standards.................... FCC Part15.247 Test procedure ................ ANSI C63.4-2014 This device described above has been tested by AIT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of AIT, this document may be altered or revised by AIT, personal only, and shall be noted in the revision of the document. Date of Test...................................... Date (s) of performance of tests ....... Dec. 08 2014 ~Dec. 24 2014 Date of Issue..................................... Dec. 24 2014 Test Result......................................... Pass Testing Engineer : ( Seal Chen) Technical Manager : ( Jackie Deng) Report No.: E-F1501005-01 Page 3 of 52 Rev: None Asia Institute Technology (Dongguan) Limited No. 22, JinQianLing Street 3, JiTiGang Village HuangJiang Town, DongGuan, GuangDong, China. Table of Contents Page 1 . SUMMARY OF TEST RESULTS 5 1.1 TEST FACILITY 6 1.2 MEASUREMENT UNCERTAINTY 6 2 . GENERAL INFORMATION 7 2.1 GENERAL DESCRIPTION OF EUT 7 2.2 DESCRIPTION OF TEST MODES 9 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 11 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 12 3 . EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 3.1.2 TEST PROCEDURE 14 3.1.3 DEVIATION FROM TEST STANDARD 14 3.1.4 TEST SETUP 14 3.1.5 EUT OPERATING CONDITIONS 14 3.1.6 TEST RESULTS 15 3.2 RADIATED EMISSION MEASUREMENT 17 3.2.1 RADIATED EMISSION LIMITS 17 3.2.2 TEST PROCEDURE 17 3.2.3 DEVIATION FROM TEST STANDARD 18 3.2.4 TEST SETUP 19 3.2.5 EUT OPERATING CONDITIONS 20 3.2.6 TEST RESULTS (BETWEEN 9KHZ – 30 MHZ) 21 3.2.7 TEST RESULTS (BETWEEN 30MHZ – 1GHZ) 22 3.2.8 TEST RESULTS (ABOVE 1000 MHZ) 23 4 . POWER SPECTRAL DENSITY TEST 33 4.1 APPLIED PROCEDURES / LIMIT 33 4.1.1 TEST PROCEDURE 33 4.1.2 DEVIATION FROM STANDARD 33 4.1.3 TEST SETUP 33 4.1.4 EUT OPERATION CONDITIONS 33 4.1.5 TEST RESULTS 34 5 . BANDWIDTH TEST 38 Report No.: E-F1501005-01 Page 4 of 52 Rev: None Asia Institute Technology (Dongguan) Limited No. 22, JinQianLing Street 3, JiTiGang Village HuangJiang Town, DongGuan, GuangDong, China. Table of Contents Page 5.1 APPLIED PROCEDURES / LIMIT 38 5.1.1 TEST PROCEDURE 38 5.1.2 EUT OPERATION CONDITIONS 38 5.1.3 TEST RESULTS 39 6 . PEAK OUTPUT POWER TEST 44 6.1 APPLIED PROCEDURES / LIMIT 44 6.1.1 TEST PROCEDURE 44 6.1.2 DEVIATION FROM STANDARD 44 6.1.3 TEST SETUP 44 6.1.4 EUT OPERATION CONDITIONS 44 6.1.5 TEST RESULTS 45 7 . 100 KHZ BANDWIDTH OF FREQUENCY BAND EDGE 46 7.1 DEVIATION FROM STANDARD 46 7.2 TEST SETUP 46 7.3 EUT OPERATION CONDITIONS 46 7.4 TEST RESULTS 47 8 . ANTENNA REQUIREMENT 50 8.1 STANDARD REQUIREMENT 50 8.2 EUT ANTENNA 50 9 . EUT TEST PHOTO 51 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Report No.: E-F1501005-01 Page 5 of 52 Rev: None Asia Institute Technology (Dongguan) Limited No. 22, JinQianLing Street 3, JiTiGang Village HuangJiang Town, DongGuan, GuangDong, China. 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C & RSS-210 Annex 8 Standard Section Test Item Judgment Remark 15.207&7.2.4 Conducted Emission PASS 15.247 (a)(2) & A8.16dB Bandwidth PASS 15.247 (b) & A8.4 Peak Output Power PASS 15.247 (c) & A8.5 Radiated Spurious Emission PASS 15.247 (d) & A8.2 Power Spectral Density PASS 15.205& A8.5 Band Edge Emission PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Report No.: E-F1501005-01 Page 6 of 52 Rev: None Asia Institute Technology (Dongguan) Limited No. 22, JinQianLing Street 3, JiTiGang Village HuangJiang Town, DongGuan, GuangDong, China. 1.1 TEST FACILITY Shenzhen Asia Test Technology Co.,Ltd. 7 / F, Xinwei Building, Gushu Village, Xixiang Town, Baoan District, Shenzhen, China FCC Registration No.: 348715; IC Registration No.: 12198A 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission Test ±1.38dB 2 RF power,conducted ±0.16dB 3 Spurious emissions,conducted ±0.21dB 4 All emissions,radiated(<1G) ±4.68dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% Report No.: E-F1501005-01 Page 7 of 52 Rev: N…

Text truncated - open the document above for the full version.

Report No.: E-F1501005-01 Page 51 of 52 Rev: None Asia Institute Technology (Dongguan) Limited No. 22, JinQianLing Street 3, JiTiGang Village HuangJiang Town, DongGuan, GuangDong, China. 9. EUT TEST PHOTO Radiated Measurement Photos Report No.: E-F1501005-01 Page 52 of 52 Rev: None Asia Institute Technology (Dongguan) Limited No. 22, JinQianLing Street 3, JiTiGang Village HuangJiang Town, DongGuan, GuangDong, China. Conducted Measurement Photos