2ACQM-EDG6-0210-AElectronic shelf label

Covered Equipment Attestation Letter for certification service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2ACQM-EDG6-0210-A EDG6-0210-A We, Applicant Company Name: VusionGroup GmbH Address: Kalsdorfer Strasse 12 8072 Fernitz-Mellach Austria Phone: 0043664 8825 2901 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. This includes the cybersecurity and anti-virus software produced or provided by Kaspersky Lab, Inc.. We certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2026-01-22 Signature Date Printed Name of Signee: Philipp Jauck Company: VusionGroup GmbH Address: Kalsdorfer Strasse 12, 8072 Fernitz-Mellach, Austria Phone: 0043664 8825 2901 Email: [email protected] Docusign Envelope ID: 6F13458F-7AEA-4511-A1B7-0B843CBC9A8E

Local Representative Letter for certification service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(7), of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2ACQM-EDG6-0210-A EDG6-0210-A We hereby acknowledge as follows: i. both signees confirm that the point of contact accepts responsibility to act as a US- American Representative on behalf of the applicant ii. the point of contact provides the physical U.S. address and email as listed below iii. both parties maintain the requirements of this agreement without expiration date US-American Point of Contact Applicant/Approval Holder Signature Signature Company Name: VusionGroup Inc. VusionGroup GmbH FRN: 0033456773 0024111486 Contact Name: Philippe Bottine Philipp Jauck Address: 3300 Olympus Blvd, Suite 280 Coppell, TX 75019 United States Kalsdorfer Strasse 12 8072 Fernitz-Mellach Austria Phone: +1 6178885217 +43 66488252901 Email: [email protected] [email protected] Docusign Envelope ID: 33353DAD-CF11-461E-9606-40182233C074

Confidentiality Request Letter for certification service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2ACQM-EDG6-0210-A EDG6-0210-A For the product listed above, we request permanent confidentiality for all applicable exhibits as there are: • operational description • block diagram • schematics • parts lists The above listed exhibits contain trade secrets and proprietary information that could benefit our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2026-01-22 Signature Date Printed Name of Signee: Philipp Jauck Company: VusionGroup GmbH Address: Kalsdorfer Strasse 12, 8072 Fernitz-Mellach, Austria Phone: 0043664 8825 2901 Email: [email protected] Docusign Envelope ID: 624FACAE-448C-4ACE-B93B-90FC84FF4A90

Short Term Confidentiality Request Letter for certification service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we request short term confidentiality prior to marketing the device for the documentation of the following product: FCC ID Model name 2ACQM-EDG6-0210-A EDG6-0210-A For the product listed above, we request short term confidentiality for all applicable exhibits as there are: • external photos • internal photos • test setup photos • user manual The above listed exhibits contain business sensitive information which we wish to keep confidential until the actual marketing of our device, that is planned for: 180 days after grant issuance If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2026-01-26 Signature Date Printed Name of Signee: Philipp Jauck Company: VusionGroup GmbH Address: Kalsdorfer Strasse 12, 8072 Fernitz-Mellach, Austria Phone: 0043664 8825 2901 Email: [email protected] Docusign Envelope ID: 67F98A7B-A2B6-499F-83F4-F9B9F8F571D3

Report No.: KSCR251000230402 Page: 1 of 10 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 1Cover Page RF Exposure Evaluation Report Application No.: KSCR2510002304AT Applicant: VusionGroup S.A. Address of Applicant: 55, place Nelson Mandela - CS 60106 92024 Nanterre - France Manufacturer: VusionGroup S.A. Address of Manufacturer: 55, place Nelson Mandela - CS 60106 92024 Nanterre - France Factory: Chongqing BOE Smart Electronics System Co., Ltd. Address of Factory: No.9 Yunhan road, Shuitu Hi-tech Industrial Zone, Beibei District, Chongqing, P.R China Equipment Under Test (EUT): EUT Name: Electronic Shelf Label Model No.: EDG6-0210-A Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2025-10-20 Date of Test: 2025-11-13 to 2025-11-13 Date of Issue: 2025-11-17 Test Result:Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: KSCR251000230402 Page: 2 of 10 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 Revision Record Version Description DateRemark 00Original2025-11-17 / Authorized for issue by: Tested By Maker_Qi/Project Engineer Approved By Terry Hou /Reviewer Report No.: KSCR251000230402 Page: 3 of 10 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 2Contents Page 1Cover Page.........................................................................................................................................1 2Contents.............................................................................................................................................3 3General Information..........................................................................................................................4 3.1General Description of E.U.T......................................................................................................4 3.1Details of E.U.T...........................................................................................................................4 3.2Separation Distance...................................................................................................................5 3.3Test Location..............................................................................................................................6 3.4Test Facility.................................................................................................................................6 4FCC Radiofrequency radiation exposure limits.............................................................................7 4.1Blanket 1 mW Blanket Exemption..............................................................................................7 4.2MPE-based Exemption...............................................................................................................7 4.3SAR-based Exemption...............................................................................................................8 5Measurement and Calculation.......................................................................................................10 5.1Maximum transmit power.........................................................................................................10 5.2RF Exposure Calculation..........................................................................................................10 Report No.: KSCR251000230402 Page: 4 of 10 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3General Information 3.1General Description of E.U.T. Power supply: DC 3V by Battery Battery model:CR2450 Output: DC 3V Portable device Mobile device Product Type: Fixed device 3.1Details of E.U.T. Operation Frequency:2400-2483.5MHz Modulation Type:MSK Number of Channels:11 Antenna Type:PCB Antenna Antenna Gain:-3.74dBi (Provided by the manufacturer) Report No.: KSCR251000230402 Page: 5 of 10 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3.2Separation Distance Separation distance between the antenna to person (R): ＜5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. R has been stated in user manual. Report No.: KSCR251000230402 Page: 6 of 10 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3.3Test Location All tests were performed at: Compliance Certification Services (Kunshan) Inc. No.10 Weiye Rd, Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China. Tel: +86 512 5735 5888Fax: +86 512 5737 0818 No tests were sub-contracted. Note: 1. SGS is not responsible for wrong test results due to incorrect information (e.g., max. internal working frequency, antenna gain, cable loss, etc) is provided by the applicant. (If applicable). 2. SGS is not responsible for the authenticity, integrity and the validity of the conclusion based on results of the data provided by applicant. (If applicable). 3. Sample source: sent by customer. 3.4Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA Compliance Certification Services (Kunshan) Inc. is accredited by the American Association for Laboratory Accreditation (A2LA). Certificate No. 2541.01. • FCC Compliance Certification Services (Kunshan) Inc. has been recognized as an accredited testing laboratory. Designation Number: CN1172. • ISED Compliance Certification Services (Kunshan) Inc. has been recognized by Innovation, Science and Economic Development Canada (ISED) as an accredited testing laboratory. Company Number: 2324E • VCCI The 3m and 10m Semi-anechoic chamber and Shielded Room of Compliance Certification Services (Kunshan) Inc. has been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: R-20134, R-11600, C-11707, T-11499, G-10216 respectively. Report No.: KSCR251000230402 Page: 7 of 10 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 4FCC Radiofrequency radiation exposur…

Text truncated - open the document above for the full version.

Report No.: KSCR251000230401V01 Page: 1 of 51 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 TEST REPORT Application No.: KSCR2510002304AT Applicant:VusionGroup S.A. Address of Applicant:55, place Nelson Mandela - CS 60106 92024 Nanterre - France Manufacturer:VusionGroup S.A. Address of Manufacturer:55, place Nelson Mandela - CS 60106 92024 Nanterre - France Factory:Chongqing BOE Smart Electronics System Co., Ltd. Address of Factory:No.9 Yunhan road, Shuitu Hi-tech Industrial Zone, Beibei District, Chongqing, P.R China Equipment Under Test (EUT): EUT Name:Electronic Shelf Label Model No.: EDG6-0210-A Standard(s) : 47 CFR Part 15, Subpart C 15.249 Date of Receipt: 2025-10-20 Date of Test: 2025-10-21 to 2025-11-13 & 2026-02-24 to 2026-02-28 Date of Issue: 2026-03-02 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. This report supersedes our previous report KSCR251000230401 issued on 2025-11-17, which is hereby deemed null void. Report No.: KSCR251000230401V01 Page: 2 of 51 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 Revision Record VersionDescriptionDateRemark 00Original2025-11-17/ 01 Added 9KHz-30MHz and 18GHz-40GHz RSE data 2026-03-02Amendment Authorized for issue by: Tested By Maker_Qi/Project Engineer Approved By Terry Hou /Reviewer Report No.: KSCR251000230401V01 Page: 3 of 51 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 2Test Summary Radio Spectrum Technical Requirement ItemStandardMethodRequirementResult Antenna Requirement 47 CFR Part 15, Subpart C 15.249 N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part ItemStandardMethodRequirementResult Field Strength of the Fundamental Signal (15.249(a)) ANSI C63.10 (2020) Section 6.5&6.6 47 CFR Part 15, Subpart C 15.249(a) Pass Restricted Band Around Fundamental Frequency ANSI C63.10 (2020) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.249(d) & 15.209 Pass Radiated Emissions Below 1GHz ANSI C63.10 (2020) Section 6.4&6.5 47 CFR Part 15, Subpart C 15.209 & 15.249 (a),(d) Pass Radiated Emissions Above 1GHz ANSI C63.10 (2020) Section 6.6 47 CFR Part 15, Subpart C 15.209 & 15.249 (a),(d) Pass 20dB Bandwidth 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2020) Section 6.9 47 CFR Part 15, Subpart C 15.215 Pass Report No.: KSCR251000230401V01 Page: 4 of 51 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3Contents Page 1COVER PAGE...........................................................................................................................................1 2Test Summary.........................................................................................................................................3 3Contents...................................................................................................................................................4 4General Information................................................................................................................................5 4.1Details of E.U.T................................................................................................................................5 4.2Description of Support Units.............................................................................................................5 4.3Channel list.......................................................................................................................................5 4.4Measurement Uncertainty................................................................................................................6 4.5Test Location....................................................................................................................................7 4.6Test Facility......................................................................................................................................7 4.7Deviation from Standards.................................................................................................................7 4.8Abnormalities from Standard Conditions..........................................................................................7 5Equipment List........................................................................................................................................8 6Radio Spectrum Technical Requirement..............................................................................................9 6.1Antenna Requirement.......................................................................................................................9 7Radio Spectrum Matter Test Results..................................................................................................10 7.1Field Strength of the Fundamental Signal (15.249(a))...................................................................10 7.2Restricted Band Around Fundamental Frequency.........................................................................13 7.3Radiated Emissions Below 1GHz...................................................................................................23 7.4Radiated Emissions Above 1GHz..................................................................................................29 7.520dB Bandwidth.............................................................................................................................47 8Test Setup Photo...................................................................................................................................51 9EUT Constructional Details (EUT Photos)..........................................................................................51 Report No.: KSCR251000230401V01 Page: 5 of 51 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 4General Information 4.1Details of E.U.T. Power supply: DC 3V by Battery Battery model:CR2450 Output: DC 3V Test Voltage:DC 3V Operation Frequency:2400-2483.5MHz Modulation Type:MSK Number of Channels:11 Antenna Type:PCB Antenna Antenna Gain:-3.74dBi (Provided by the manufacturer) 4.2Description of Support …

Text truncated - open the document above for the full version.