2ACUWEI8800wireless network interface

Miele@home Manual for EI8800-A and EI7800 USA/CDN Market Version 1.2 Manual for EI 7800/EI8800-A USA/CDN Version: 1.2 EI8800-A EI7800 Date: 29/09/2014 Manual_EI7800_EI8800- A_USA_CDN_1.2.docx  2014 Miele&Cie. KG Page 2 of 8 Revision History Date Version Description Author Department 09.09.2014 1.0 Draft Initial manual for FCC/IC F. Laube GTE/SKT 23.09.2014 1.1 Final manual IC Statement in France Technical data update F. Laube GTE/SKT 29.09.2014 1.2 Added RF Parameter Power Radiated Test Report 6-0196-12- 1-2b Clause 5.5 F. Laube GTE/SKT Reviewed By Date Version Name Department 09.09.2014 1.0 Draft G. Borgelt GTE/TL 23.09.2014 1.1 G. Borgelt GTE/TL 29.09.2014 1.2 G. Borgelt GTE/TL Approvals Date Version Name Department Manual for EI 7800/EI8800-A USA/CDN Version: 1.2 EI8800-A EI7800 Date: 29/09/2014 Manual_EI7800_EI8800- A_USA_CDN_1.2.docx  2014 Miele&Cie. KG Page 3 of 8 Contents 1. General 4 2. Technical data 4 3. Norms / Standards 5 3.1 FCC / IC 5 3.2 Safety 5 3.3 RF-Standard 5 3.4 Photos and Labels 5 4. Regulatory Notice 7 4.1 United States (FCC Notice) 7 4.2 Canada (IC Notice) 8 Manual for EI 7800/EI8800-A USA/CDN Version: 1.2 EI8800-A EI7800 Date: 29/09/2014 Manual_EI7800_EI8800- A_USA_CDN_1.2.docx  2014 Miele&Cie. KG Page 4 of 8 1. General The EI7800 and EI8800-A are wireless network interface modules for Miele home appliances like hoods, hobs, cooling devices or washing machines. The modules are supporting the IEEE 802.15.4 ZigBee protocol. The EI8800-A is a module for build in appliances during manufacturing. The EI7800 is a wireless stick which is connected to the appliance by the customer or customer service. Both modules depend on the same wireless design with a single chip transceiver. The EI7800 has additional components for power supply and UART driver. 5V to 3,3V Voltage Regulator 5V to 3,3V Uart Driver SingleChip ZigBee- Transceiver PCB-Antenna with antenna- Network Home appliance Interface EI 7800 SingleChip ZigBee- Transceiver PCB-Antenna with antenna- Network Home appliance Interface 3,3V VCC EI 8800 2. Technical data VCC in V EI8800-A EI7800 3,3 5,0 Max. Current in mA EI8800-A EI7800 50 Current in A 0.06 ambient temperature in°C EI8800-A EI7800 0 – 85 0 - 50 Humidity max 93% non condensation Dimensions in mm EI8800-A EI7800 Wire (EI8800) 30/27 82,5/40,0/23,5 325 wireless MCU/RF IC CC2530 Antenna type PCB inverted F Crystal Input Clock in MHz 32 Frequency 2.4 GHz Channels 11 - 26 Channel Frequencys 2,405 GHz – 2,480 GHz (5MHz distance) Bandwidth 2,83 MHz Transmission Power in mW <8 Manual for EI 7800/EI8800-A USA/CDN Version: 1.2 EI8800-A EI7800 Date: 29/09/2014 Manual_EI7800_EI8800- A_USA_CDN_1.2.docx  2014 Miele&Cie. KG Page 5 of 8 3. Norms / Standards 3.1 FCC / IC FCC Regulation Part 15.109, Part 15.209 and Part 15.247 IC regulations RSS-Gen Issue 3 and RSS-210 Issue 8 3.2 Safety UL 60730-1A, CAN/CSA E60730-1:02+A1:2007 CSA Certificate 70009686 3.3 RF-Standard The modules use the RF standard IEEE 802.15.4. 3.4 Photos and Labels EI7800 product EI7800 Internal EI7800 Label side view Manual for EI 7800/EI8800-A USA/CDN Version: 1.2 EI8800-A EI7800 Date: 29/09/2014 Manual_EI7800_EI8800- A_USA_CDN_1.2.docx  2014 Miele&Cie. KG Page 6 of 8 EI8800-A Top View EI8800-A integrated in home appliance steering device Manual for EI 7800/EI8800-A USA/CDN Version: 1.2 EI8800-A EI7800 Date: 29/09/2014 Manual_EI7800_EI8800- A_USA_CDN_1.2.docx  2014 Miele&Cie. KG Page 7 of 8 4. Regulatory Notice 4.1 United States (FCC Notice) FCC ID: 2ACUWEI7800 FCC ID: 2ACUWEI8800 In accordance with FCC Part 15, the 2ACUWEI8800 is listed as a Modular Transmitter Device. FCC CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of FCC Rules. Operation is Subject to following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received including interference that cause undesired operation. FCC STATEMENT: This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a different circuit from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help. USERS MANUAL OF THE END PRODUCT: The end user has to be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the user’s manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT (only for EI8800-A): The final end product must be labeled in a visible area with the following " Contains FCC ID: 2ACUWEI8800 ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.1…

Text truncated - open the document above for the full version.

CONFIDENTIALITYREQUEST for CertificationServicein USA FederalCommunicationCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD 21048 09.09.2014 TO WHOMIT MAYCONCERN Pursuantto Paragraphs§0.457and0.459of the Commission'sRules(47 C.F.R.)and Section§552(b)(4)of the Freedomof InformationAct,we requestsconfidentialityfor the followingproducts: FCCID 2ACUWEI8800 Modelname E18800-A Fortheproductstatedabove,we requestpermanentconfidentialityfor exhibitswhich containOperationalDescription,BlockDiagram,Schematics,PartsListsor TuneUp Information. Theaboveexhibitscontainour tradesecretsandproprietaryinformationthatcouldbe of benefitto our competitors. If youhaveanyquestions,pleasefeelfreeto contactme at the addressshownbelow. Sincerely, Miele& Cie.KG GunnarBorgelt Carl-Miele-Straße29 33332Gütersloh Phone:+49524189-6292 Fax:+49524189-786292 [email protected]

Miele& Cie.KG IC/FCCModularApprovalStatement Receiver FederalCommunicationCommission EquipmentAuthorizationDevision,Application ProcessingBranch 7435OaklandMillsRoad Columbia,MD 21048 Subject: LimitedModularApprovalStatement Date:16.09.2014 FCCCertificationNumber:2ACUWE/8800 ModelName/Number:E/8800-A TO WHOMIT MAYCONCERN Pursuantto ParagraphsRSS-GENIssue3 December2010Item3.2.2andCFR§ 15.212, we herewithdeclarefor our module. Modularapprovalrequirement YesNo * (a) Theradioelementsmusthavethe radiofrequencycircuitrybe shielded. Physical/discreteandtuningcapacitorsmaybe locatedexternalto the shield, X but mustbe on the moduleassembly. *Pleaseprovidea detailedexplanationif the answeris "No.": (b) Themoduleshallhavebufferedmodulation/datainput(s)(if suchinputsare provided)to ensurethatthe modulewill complywiththe requirementsset out X in the applicableRSSstandardunderconditionsof excessivedataratesor over-modulation. *Pleaseprovidea detailedexplanationif the answeris "No.": (c) Themoduleshallhaveits ownpowersupplyregulationon the module.This is to ensurethatthe modulewill complywiththe requirementsset out in the X applicablestandardregardlessof the designof the powersupplyingcircuitryin the hostdevicewhichhousesthe module. *Pleaseprovidea detailedexplanationif the answeris "No.": ThevoltageregulatorTypeKF33BDTor equaltypemustbe placedon the hostcontrolboard«55mm distanceto module) (d) Themoduleshallcomplywiththe provisionsfor externalpoweramplifiers and antennasdetailedin this standard.Theequipmentcertificationsubmission X shallcontaina detaileddescriptionof the configurationof all antennasthatwill be usedwiththe module. *Pleaseprovidea detailedexplanationif the answeris "No.": Themoduleusesan internalPCBantennawhichcannot be changed. (e) Themoduleshallbe testedfor compliancewiththe applicablestandardin a stand-aloneconfiguration,i.e. the modulemustnot be insideanotherdevice X duringtesting. *Pleaseprovidea detailedexplanationif the answeris "No.": Themodulewastestedwithoutthe housinghomeappliance. (f) Themoduleshallcomply withthe CategoryI equipment labeling X requirementsand CFR§ 15.212(a)(1)(vi). Miele& cie,KG IC/FCCModularApprovalStatement *Pleaseprovidea detailedexplanationif the answeris "No.": (g) ThemoduleshallcomplywithapplicableRSS-102exposurerequirements andanyapplicableFCCRF exposurerequirementwhicharebasedon the X intendeduse/configurations. *Pleaseprovidea detailedexplanationif the answeris "No.": (i) Themodulartransmittercomplieswithall applicableFCCrules.Instructions X for maintainingcomplianceare givenin the userinstructions. If youhaveanyquestions,pleasefeelfreeto contactus at theaddressshownbelow BestRegards, GunnarBorgelt Miete& Gie.KG Gart-Miete-Straße29 33332Güterstoh +49521489-6292 2

Page 1 of 4 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM Laboratory Accreditation and Listings D-PL-12047-01-01 Reg. No.: 736496 MRA US-EU 0003 Industry Canada Reg. No.: 3462D-1 3462D-2 Reg. No.: R-2665, R-2666 C-2914, T-1967 G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: [email protected] • Internet: www.cetecom.com Annex 1: External photos to TEST REPORT No.: 6-0196-12-1-2a-C1 for Communication unit for household appliances EI 8800 /-A (ZigBee™) FCC-ID: 2ACUWEI8800 IC: 5669C-EI8800 According to: FCC Regulations Part 15.107, Part 15.109, Part 15.209 & Part 15.247 IC Regulations RSS-Gen Issue 3 RSS-210: Issue 8 Miele & Cie. KG Annex 2 Test Report 6-0196-12-1-2a-C1, Page 2 of 4 TR6-0196-12-1-2a_A1-C1 Table of contents 1. PHOTOS OF EUT AND AE’S ............................................................................................................................ 3 Annex 2 Test Report 6-0196-12-1-2a-C1, Page 3 of 4 TR6-0196-12-1-2a_A1-C1 1. Photos of EUT and AE’s EUT enclosure, top and side view AE 1, top view Annex 2 Test Report 6-0196-12-1-2a-C1, Page 4 of 4 TR6-0196-12-1-2a_A1-C1 AE 2 (Notebook Dell)

Page 1 of 6 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM Laboratory Accreditation and Listings D-PL-12047-01-01 Reg. No.: 736496 MRA US-EU 0003 Industry Canada Reg. No.: 3462D-1 3462D-2 Reg. No.: R-2665, R-2666 C-2914, T-1967 G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: [email protected] • Internet: www.cetecom.com Annex 2: Internal photos to TEST REPORT No.: 6-0196-12-1-2a-C1 for Communictaion unit for household appliances EI 8800 /-A (ZigBee™) FCC-ID: 2ACUWEI8800 IC: 5669C-EI8800 According to: FCC Regulations Part 15.107, Part 15.109, Part 15.209 & Part 15.247 IC Regulations RSS-Gen Issue 3 RSS-210: Issue 8 Miele & Cie. KG Annex 2 Test Report 6-0196-12-1-2a-C1, Page 2 of 6 TR6-0196-12-1-2a_A2-C1 Table of contents 1. PHOTOS OF EUT’S AND AE ............................................................................................................................ 3 Annex 2 Test Report 6-0196-12-1-2a-C1, Page 3 of 6 TR6-0196-12-1-2a_A2-C1 1. Photos of EUT’s and AE EUT C soldered on AE 1 (PCB), top view. RF module (EUT C) marked at the bottom left. Annex 2 Test Report 6-0196-12-1-2a-C1, Page 4 of 6 TR6-0196-12-1-2a_A2-C1 AE1 (PCB) of EUT C, rear view Annex 2 Test Report 6-0196-12-1-2a-C1, Page 5 of 6 TR6-0196-12-1-2a_A2-C1 EUT C + AE 1 with open case , top and side view EUT A (conducted) top side Annex 2 Test Report 6-0196-12-1-2a-C1, Page 6 of 6 TR6-0196-12-1-2a_A2-C1 EUT A (conducted) rear side

Page 1 of 47 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM Laboratory Accreditation and Listings D-PL-12047-01-01 Reg. No.: 736496 MRA US-EU 0003 Industry Canada Reg. No.: 3462D-1 3462D-2 Reg. No.: R-2665, R-2666 C-2914, T-1967 G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: [email protected] • Internet: www.cetecom.com Annex 4: Measurement diagrams to TEST REPORT No.: 6-0196-12-1-2a-C1 for Communication unit for household appliances EI 8800 /-A (ZigBee™) FCC-ID: 2ACUWEI8800 IC: 5669C-EI8800 According to: FCC Regulations Part 15.107, Part 15.207, Part 15.209 & Part 15.247 IC Regulations RSS-Gen Issue 3 RSS-210 Issue 8 Miele & Cie. KG Annex 4 to 6-0196-12-1-2a-C1, Page 2 of 47 TR6-0196-12-1-2a_A4-C1 Table of contents 1. MEASUREMENT DIAGRAMS ......................................................................................................................... 3 1.1. AC power-line conducted emission measurements ......................................................................................... 3 1.2. Radiated field strength (§15.209) .................................................................................................................... 6 1.2.1. Radiated magnetic field strength measurements (f < 30 MHz) 6 1.2.2. Radiated field strength (30 MHz < f < 1 GHz) 9 1.2.3. Radiated field strength (1 GHz < f < 18 GHz) 12 1.2.4. Radiated emissions in the frequency range above 18 GHz 15 1.2.5. Carrier radiated field strength in 3 m and band-edge compliance acc. FCC 15.247 & 15.209 17 1.3. Radiated field strength (§15.109, Class B) ...................................................................................................... 22 1.3.1. Radiated field strength (30 MHz < f < 1 GHz) 22 1.3.2. Radiated field strength (1 GHz < f < 10 GHz) 23 1.4. Maximum peak conducted power .................................................................................................................... 24 1.5. Power spectral density ..................................................................................................................................... 26 1.6. 20 dBc conducted emissions ............................................................................................................................ 28 1.7. 6 dB bandwidth ................................................................................................................................................ 37 1.8. 99% Occupied bandwidth ................................................................................................................................ 39 1.9. Frequency stability........................................................................................................................................... 41 Annex 4 to 6-0196-12-1-2a-C1, Page 3 of 47 TR6-0196-12-1-2a_A4-C1 1. Measurement diagrams 1.1. AC power-line conducted emission measurements CETECOM GmbH 1 Diagram No. 1.01 Test Description: Conducted Voltage Measurement Testspecification: FCC §15.207, RSS-Gen Issue 3 Technical Data: Please see next page for detailed information Diagram: Shows the peak values as a sum of measured ports (N+L1) in maxhold mode Operator name: YZH Report.- Nr. 6-0196-12-1-2-a EUT: EI8800-A shielded SN20, Ch15 Manufacturer: Miele Operating mode: TX Power during test: 110 V AC 60 Hz 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 150 k 30 040 050 0 80 01M2M3M4M5M6 810M20 M30 M Le vel i n dB μV F re q u e n c y in H z 0 1 b _ F C C _ 1 0 7 _ 2 0 7 _ C la ss B _ V o lt a g e _ P K _ Q P A V _ N _ L 1 Cla ss B Vo lt a ge QP Cla ss B Vo lt a ge AV 25 ,5 054 69 MHz 18,44 3 d Bμ V Date: 30.08.2012 Page 2 of 2 Annex 4 to 6-0196-12-1-2a-C1, Page 4 of 47 TR6-0196-12-1-2a_A4-C1 Final Result 1 Frequency (MHz) QuasiPeak (dBμV) Meas. Time (ms) Bandwidth (kHz) PE Line Corr. (dB) Margin (dB) Limit (dBμV) 0.933750 29.5 1000.0 9.000 GND N 0.0 26.5 56.0 Final Result 2 Frequency (MHz) CAverage (dBμV) Meas. Time (ms) Bandwidth (kHz) PE Line Corr. (dB) Margin (dB) Limit (dBμV) 0.933750 27.0 1000.0 9.000 GND N 0.0 19.0 46.0 Annex 4 to 6-0196-12-1-2a-C1, Page 5 of 47 TR6-0196-12-1-2a_A4-C1 CETECOM GmbH 1 Diagram No. 1.02 Date: 30.08.2012 Page 1 of 1 Test Description: Conducted Voltage Measurement Class B Testspecification: FCC §15.107, RSS-Gen Issue 3 Technical Data: -- Diagram: Shows the peak values as a sum of measured ports (N+L1) in maxhold mode Operator name: YZH Report.- Nr. 6-0196-12-1-2-a EUT: EI8800-A schielded SN12, Ch15 Manufacturer: Miele Operating mode: RX Power during test: 110 V AC 60 Hz Comment 1: 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 150 k 30 040 050 0 80 01M2M3M4M5M6 810M20 M30 M Le vel i n dB μV F re q u e n c y in H z 0 1 b _ F C C _ 1 0 7 _ 2 0 7 _ C la ss B _ V o lt a g e _ P K _ Q P A V _ N _ L 1 Cla ss B Vo lt a ge QP Cla ss B Vo lt a ge AV 94 2,969 kHz 30 ,8 68 dB μV 5,34 9219 MHz 21,182 dB μV Annex 4 to 6-0196-12-1-2a-C1, Page 6 of 47 TR6-0196-12-1-2a_A4-C1 1.2. Radiated field strength (§15.209) 1.2.1. Radiated magnetic field strength measurements (f < 30 MHz) CETECOM GmbH Page 1 Diagram No. 2.01 Test description: Magnetic Fieldstrength Measurement related to 300 m/ 30 m distance Test site and distance: Semi Anechoic Room with mobile absorbers on the floor (SAR) with 3 m measurement distance Distance correction: used Technical Data: Please see page 2 for detailed data of measurement setup Rec. antenna (pre-scan): height 1.00 m, parallel and 90° to EUT polarisation Used filter: bypass Test specification: FCC 15.205 § 15.209; RSS-Gen: Issue 3 Operator: Tas Operating co…

Text truncated - open the document above for the full version.

Page 1 of 38 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM Laboratory Accreditation and Listings Reg. No.: 736496 MRA US-EU 0003 Industry Canada Reg. No.: 3462D-1 Reg. No.: 3462D-2 Reg. No.: 3462D-3 Voluntary Controls for Electromagnetic Emissions Reg. No.: R-2665, R-2666 C-2914, T-1967, G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: [email protected] • Internet: www.cetecom.com TEST REPORT No.: 6-0196-12-1-2a-C1 for Communication unit for household appliances EI 8800 /-A (ZigBee™) FCC-ID: 2ACUWEI8800 IC: 5669C-EI8800 According to: FCC Regulations Part 15.107, Part 15.207, Part 15.209 & Part15.247 IC-Regulations RSS-Gen Issue 3 RSS-210 Issue 8 Miele & Cie. KG Test Report 6-0196-12-1-2a-C1, Page 2 of 38 TR6-0196-12-1-2a-C1 Table of contents 1. SUMMARY OF TEST RESULTS...................................................................................................................... 3 2. ADMINISTRATIVE DATA ............................................................................................................................... 5 2.1. Identification of the testing laboratory ............................................................................................................. 5 2.2. Test location .................................................................................................................................................... 5 2.3. Organizational items ........................................................................................................................................ 5 2.4. Applicant’s details ........................................................................................................................................... 5 2.5. Manufacturer’s details ..................................................................................................................................... 5 3. EQUIPMENT UNDER TEST (EUT) ................................................................................................................. 6 3.1. Technical data of main EUT declared by applicant ......................................................................................... 6 3.2. EUT: Type, S/N etc. and short descriptions used in this test report ................................................................ 7 3.3. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions .................................................................. 7 3.4. EUT set-ups ..................................................................................................................................................... 8 3.5. EUT operating modes ...................................................................................................................................... 8 4. DESCRIPTION OF TEST SYSTEM SET-UP’S .............................................................................................. 9 4.1. Test system set-up for AC power-line conducted emission measurements ..................................................... 9 4.2. Test system set-up for conducted RF-measurement at antenna port ................................................................ 10 4.3. Test system set-up for radiated magnetic field measurements below 30 MHz ................................................ 10 4.4. Test system set-up for electric field measurement in the range 30 MHz to 1 GHz ......................................... 12 4.5. Test system set-up for electric field measurement above 1 GHz ..................................................................... 13 5. MEASUREMENTS ............................................................................................................................................. 14 5.1. General Limit - Conducted emissions on AC-Power lines .............................................................................. 14 5.2. General Limit - Radiated field strength emissions below 30 MHz .................................................................. 16 5.3. General Limit - Radiated field strength emissions, 30 MHz - 1 GHz .............................................................. 18 5.4. General Limit - Radiated emissions, above 1 GHz .......................................................................................... 20 5.5. RF Parameter - Band-Edge compliance measurements ................................................................................... 22 5.6. RF Parameter – RF Power (EIRP) ................................................................................................................... 23 5.7. RF Parameter - RF Power Conducted .............................................................................................................. 24 5.8. RF Parameter - Power Spectral Density .......................................................................................................... 26 5.9. RF Parameter – 20 dBc Emission specification ............................................................................................... 27 5.10. RF Parameter - 6 dB Bandwidth and 99% occupied Bandwidth ................................................................... 28 5.11. RF Parameter - Frequency stability ............................................................................................................... 30 5.12. Measurement uncertainties ............................................................................................................................ 32 6. ABBREVIATIONS USED IN THIS REPORT ...................................…

Text truncated - open the document above for the full version.

Page 1 of 4 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM Laboratory Accreditation and Listings D-PL-12047-01-01 Reg. No.: 736496 MRA US-EU 0003 Industry Canada Reg. No.: 3462D-1 3462D-2 Reg. No.: R-2665, R-2666 C-2914, T-1967 G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: [email protected] • Internet: www.cetecom.com Annex 3: Test set-up photos to TEST REPORT No.: 6-0196-12-1-2a-C1 for Communication unit for household appliances EI 8800 /-A (ZigBee™) FCC-ID: 2ACUWEI8800 IC: 5669C-EI8800 According to: FCC Regulations Part 15.109 Part 15.209 Part 15.247 IC Regulations RSS-Gen Issue 3 RSS-210 Issue 8 Miele & Cie. KG Annex 3 Test Report 6-0196-12-1-2a-C1, Page 2 of 4 TR6-0196-12-1-2a_A3-C1 Table of contents 1. PHOTOS OF MEASUREMENT SET-UP......................................................................................................... 3 Annex 3 Test Report 6-0196-12-1-2a-C1, Page 3 of 4 TR6-0196-12-1-2a_A3-C1 1. Photos of measurement set-up Radiated field strength measurements in the FAR (Fully-Anechoic-Chamber), EUT D Radiated field strength measurements in the SAR (Semi-Anechoic-Chamber), EUT D Annex 3 Test Report 6-0196-12-1-2a-C1, Page 4 of 4 TR6-0196-12-1-2a_A3-C1 EMI AC – Power lines conducted test with power supply 110 AC V/ 60 Hz, EUT C Conducted RF-measurements, EUT B + AE 2 + AE 3