2AD37JUPW3415Qi2 3-in-1 Magnetic Foldable Wireless Charging Station

Guide D'installation Rapide F R : Kurzanleitung Für Installation D E : Quick Installation Guide E N : Guía De Instalación Rápida E S : IT : Guida rapida all'installazione NL : Beknopte installatiehandleiding PT : Guia de instalação rápida SE : Snabbinstallationsguide DK : Startvejledning NO : Hurtiginstallasjonsveiledning FI : Pika-asennusopas HU: Gyors telepítési útmutató RU : Руководство по быстрой установке 日本語 : 繁中文 : 快速安裝手冊 简中文 : 快速安装手册 English AR:  Heb: הריהמ הנקתה ךירדמ Deutsch FrançaisItaliano NederlandsEspañolPortuguêsSvenska JUPW3415 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ISED Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-003(B) / NMB-003(B) Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Déclaration d’exposition aux radiations: L’appareil a ete evalue pour repondre aux exigencies generals d’ exposition aux radio frequencies. L’appareil peut etre utilise en condition d’ exposition portable sans restriction LIMITED WARRANTY j5create offers a limited 2-year warranty. User’s wear & tear damage is not included. The user shall call or email j5create customer service with the defect information of the product and obtain a return authorization number. Users are responsible for one-way return freight cost and we will take care of one-way freight back. In order to obtain a return authorization number, users should have the following information handy when calling or emailing the service team: (i) a copy of the original purchase invoice to verify your warranty (ii) a product serial number (iii) a description of the problem (iv) customer’s name, address, and telephone number j5create does not warrant that the operation of the product will be uninterrupted or error-free. j5create is not responsible for damage arising from failure to follow instructions relating to the product’s use. This warranty does not apply to: (a) consumable parts, unless damage has occurred due to a defect in materials or workmanship; (b) cosmetic damage, including but not limited to scratches, dents, and broken plastic on ports; (c) damage caused by use with non-j5create products; (d) damage caused by natural disasters; (e) damage caused by human misuse (lost, accident, abuse, misuse or other external causes); (f) damage caused by operating the product outside the permitted or intended uses described by j5create; (g) damage caused by service (including upgrades and expansions) performed by anyone who is not a representative of j5create or a j5create Authorized Service Provider; (h) a product or part that has been modified to alter functionality or capability without the written permission of j5create; or (i) if any j5create serial number on the product has been removed or defaced. If such a situation occurs, j5create will calculate the cost of materials and repair for your reference. This warranty is given by j5create in lieu of any other warranties expressed or implied. Caractéristiques • Certifié selon la technologie avancée de charge sans fil Qi2, offrant à l'iPhone® série 12~15 ou ultérieur jusqu'à 15 W de recharge rapide. • Les téléphones Android™, avec la possibilité de se fixer sur le socle de recharge magnétique, peuvent se recharger sans fil avec une recharge rapide allant jusqu'à 15 W. • Station de recharge sans fil 3-en-1, rechargeant simultanément vos smartphones, votre Apple® Watch® et vos écouteurs AirPods® ou compatibles recharge sans fil Qi™. • Peut également servir de support de téléphone avec des angles de vision réglables pour un confort personnalisé. • Doté d'un design pliable pour plus de commodité, parfait pour les voyageurs en déplacemen…

Text truncated - open the document above for the full version.

Kaijet Technology International Corporation (Aug. 04, 2024) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: 2AD37JUPW3415) [Kaijet Technology International Corporation] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature TAI YU‐CHI

CERPASS TECHNOLOGY CORP. Report No.: 24030167 CERPASS TECHNOLOGY CORP. Issued date : Aug. 07, 2024 Page No. : 1 of 4 EXTERNAL PHOTOGRAPHS OF EUT 1) EUT Photo 2) EUT Photo CERPASS TECHNOLOGY CORP. Report No.: 24030167 CERPASS TECHNOLOGY CORP. Issued date : Aug. 07, 2024 Page No. : 2 of 4 3) EUT Photo 4) EUT Photo CERPASS TECHNOLOGY CORP. Report No.: 24030167 CERPASS TECHNOLOGY CORP. Issued date : Aug. 07, 2024 Page No. : 3 of 4 5) EUT Photo 6) EUT Photo Label Position CERPASS TECHNOLOGY CORP. Report No.: 24030167 CERPASS TECHNOLOGY CORP. Issued date : Aug. 07, 2024 Page No. : 4 of 4 7) EUT Photo

建檔日期：2023-10-26 修改日期：2024-05-23 客戶名稱：j5create 產品名稱：JUPW3415 版 本：V1-實驗室版 需求內容：機構印刷 尺 寸：如圖(尺寸1:1) 日期變更內容繪圖人員 10/26 第一版Tina 12/07 ID修改Tina 04/29 ID修改&印刷修改Fisher 05/23 印刷修改Tina 10x4.33.5x5.6 7.2x6.7 62.27x36.17 Pantone421 c 90.00 Qi2 3-in-1 Magnetic Foldable Wireless Charging Station Qi2 三合一磁吸折疊立架式無線充電座 Model/型號：JUPW3415 Input / 輸入:5.0V⎓3.0A,9.0V⎓3.0A(27.0W Max) Magnetic wireless charging / 手機無線充:5.0W,7.5W,10.0W,15.0W(Max) Wireless charging for earphone / 耳機無線充:5.0W(Max) Wireless charging for watch / 手錶無線充:具體規格詳見使用手冊 Total output / 總輸出:具體規格詳見使用手冊 FCC ID:2AD37JUPW3415IC:28313-JUPW3415HVIN: 3415V1.0 Qi2 3-in-1 Magnetic Foldable Wireless Charging Station Qi2 三合一磁吸折疊立架式無線充電座 Model/型號：JUPW3415 Input / 輸入:5.0V⎓3.0A,9.0V⎓3.0A(27.0W Max) Magnetic wireless charging / 手機無線充:5.0W,7.5W,10.0W,15.0W(Max) Wireless charging for earphone / 耳機無線充:5.0W(Max) Wireless charging for watch / 手錶無線充:詳見使用手冊 Total output / 總輸出:手機無線充15W (Max) + 耳機無線充5W (Max) + 手 錶無線充 FCC ID:2AD37JUPW3415IC:28313-JUPW3415HVIN: 3415V1.0 詳細注意事項參閱說明書說明 產地：中國製造 製造日期：2024年6月 詳細注意事項參閱說明書說明 產地：中國製造 製造日期：2024年6月

CERPASS TECHNOLOGY CORP. Report No.: 24030167 CERPASS TECHNOLOGY CORP. Issued date : Aug. 07, 2024 Page No. : 1 of 9 INTERNAL PHOTOGRAPHS OF EUT 1) EUT Photo 2) EUT Photo CERPASS TECHNOLOGY CORP. Report No.: 24030167 CERPASS TECHNOLOGY CORP. Issued date : Aug. 07, 2024 Page No. : 2 of 9 3) EUT Photo 4) EUT Photo CERPASS TECHNOLOGY CORP. Report No.: 24030167 CERPASS TECHNOLOGY CORP. Issued date : Aug. 07, 2024 Page No. : 3 of 9 5) EUT Photo 6) EUT Photo Coil for Magnetic wireless charging Coil for watch Coil for earphone CERPASS TECHNOLOGY CORP. Report No.: 24030167 CERPASS TECHNOLOGY CORP. Issued date : Aug. 07, 2024 Page No. : 4 of 9 7) EUT Photo 8) EUT Photo Coil for Magnetic wireless charging CERPASS TECHNOLOGY CORP. Report No.: 24030167 CERPASS TECHNOLOGY CORP. Issued date : Aug. 07, 2024 Page No. : 5 of 9 9) EUT Photo 10) EUT Photo CERPASS TECHNOLOGY CORP. Report No.: 24030167 CERPASS TECHNOLOGY CORP. Issued date : Aug. 07, 2024 Page No. : 6 of 9 11) EUT Photo 12) EUT Photo Coil for earphone CERPASS TECHNOLOGY CORP. Report No.: 24030167 CERPASS TECHNOLOGY CORP. Issued date : Aug. 07, 2024 Page No. : 7 of 9 13) EUT Photo 14) EUT Photo Coil for watch CERPASS TECHNOLOGY CORP. Report No.: 24030167 CERPASS TECHNOLOGY CORP. Issued date : Aug. 07, 2024 Page No. : 8 of 9 15) EUT Photo 16) EUT Photo RF Chip for Magnetic wireless charging CERPASS TECHNOLOGY CORP. Report No.: 24030167 CERPASS TECHNOLOGY CORP. Issued date : Aug. 07, 2024 Page No. : 9 of 9 17) EUT Photo 18) EUT Photo RF Chip for watch RF Chip for earphone

CERPASS TECHNOLOGY CORP. Report No.: 24030167-DRFCC02 Cerpass Technology Corp. Issued Date : Aug. 07, 2024 D-FD-514-0 V1.1 Page No. : 1 of 13 RF Exposure Report Applicant : Kaijet Technology International Corporation Address : 8F., No. 109, Zhongcheng Road, Tucheng Dist., New Taipei City, Taiwan R.O.C Equipment : Qi2 3-in-1 Magnetic Foldable Wireless Charging Station Model No. : JUPW3415, JUPW3415YPZ (All model provide with main wireless charging stand product; Y can be blank, A to Z represent different appearance colour; P can be blank, with or without for marketing purpose only; Z can be blank, A to Z, a to z, 0-9 represent non-power related accessory(s) included in box) Trade Name : j5create FCC ID. : 2AD37JUPW3415 Standard : FCC CFR 47 part1, 1.1310 KDB680106 D01v04 I HEREBY CERTIFY THAT : The sample was received on Jun. 14, 2024 and the test items were conducted during Aug. 01, 2024 at Cerpass Technology Corp. The test result refers exclusively to the test presented test model / sample. Without written approval of Cerpass Technology Corp., the test report shall not be reproduced except in full. Approved by: Leevin Li / Supervisor CERPASS TECHNOLOGY CORP. Report No.: 24030167-DRFCC02 Cerpass Technology Corp. Issued Date : Aug. 07, 2024 D-FD-514-0 V1.1 Page No. : 2 of 13 CONTENTS 1. Test Configuration of Equipment under Test ........................................................................................... 3 1.1. Feature of Equipment under Test .............................................................................................................. 3 1.2. Test Mode and Test Software .................................................................................................................... 3 1.3. Description of Test System........................................................................................................................ 5 1.4. General Information of Test ....................................................................................................................... 6 1.5. Measurement Uncertainty ......................................................................................................................... 6 2. Summary Of Standards And Results ........................................................................................................ 7 2.1. Measuring Standard .................................................................................................................................. 7 2.2. Requirements ............................................................................................................................................ 7 2.3. Duty cycle .................................................................................................................................................. 8 2.4. Typical test Setup .................................................................................................................................... 10 2.5. Specification Limits ................................................................................................................................. 10 2.6. Test Equipment List and Details .............................................................................................................. 11 2.7. Test Result .............................................................................................................................................. 11 2.8. Photographs of test setup ....................................................................................................................... 13 CERPASS TECHNOLOGY CORP. Report No.: 24030167-DRFCC02 Cerpass Technology Corp. Issued Date : Aug. 07, 2024 D-FD-514-0 V1.1 Page No. : 3 of 13 1. Test Configuration of Equipment under Test 1.1. Feature of Equipment under Test Product Qi2 3-in-1 Magnetic Foldable Wireless Charging Station Model No. JUPW3415, JUPW3415YPZ (All model provide with main wireless charging stand product; Y can be blank, A to Z represent different appearance colour; P can be blank, with or without for marketing purpose only; Z can be blank, A to Z, a to z, 0-9 represent non-power related accessory(s) included in box) Model Discrepancy See explanation of model designation JUPW3415YPZ. Model JUPW3415 is the representative for final test. Frequency Range Output Wireless 1 Magnetic wireless charging: 360KHz Output Wireless 2 Wireless charging for earphone: 111~205KHz Output Wireless 3 Wireless charging for watch: 325KHz Antenna Type Coil Antenna Modulation Type Output Wireless 1: FSK Output Wireless 2: ASK Output Wireless 3: ASK Input 5.0V⎓3.0A,9.0V⎓3.0A (27.0W Max) Magnetic wireless charging 5.0W,7.5W,10.0W,15.0W(Max) Wireless charging for earphone 5.0W(Max) Wireless charging for watch Compatible with Apple ® Watch ® : Series 9/ Ultra 2/Ultra/8/7/SE/6/5/4/3/2/1 Operating Temperature -10°C~+40°C Note: For more details, please refer to the User’s manual of the EUT. 1.2. Test Mode and Test Software Test Mode Operating Description Mode 1 Wireless Charging for Wireless 1(Standby mode) +Wireless 2(Standby mode)+ Wireless 3(Standby mode) Mode 2 Wireless Charging for Wireless 1(15W for Wireless Load, Operating @360KHz) +Wireless 2(5W for Wireless Load, Operating @111~205KHz) +Wireless 3(5W for Apple watch 6, Operating @325KHz) Note: 1）For mode 2.The Watch were respectively evaluation Low, medium and high charge status evaluation. 2) The EUT Have three coils, the specific location is shown below: CERPASS TECHNOLOGY CORP. Report No.: 24030167-DRFCC02 Cerpass Technology Corp. Issued Date : Aug. 07, 2024 D-FD-514-0 V1.1 Page No. : 4 of 13 Output Wireless 1 Output Wireless 2 Output Wireless 3 CERPASS TECHNOLOGY CORP. Report No.: 24030167-DRFCC02 Cerpass Technology Corp. Issued Date : Aug. 07, 2024 D-FD-514-0 V1.1 Page No. : 5 of 13 1.3. Description of Test System Product Manufacturer Model No. S/N Power Cord 1 Adapter XIAOMI HA832 N/A N/A 2 Wireless Load 1 YBZ YBZ-MINIRX V1.2.0 N…

Text truncated - open the document above for the full version.

Page1 of 4 DongguanFANYAElectronicsCo.,LTD 东莞市泛亚电子有限公司TEL：0769-22490287FAX：0769-22499451FY-GZ001 承認書 SPECIFICATIONFORAPPROVAL 客戶： CUSTOMER: N006 客戶料號： CUSTP/N: E28A-00005 泛亞料號： FINEP/N: 産品型號： DESC: FYN00612024061901L 日期： DATE: 2024/06/19 版本： Version: A.0 擬制 PREPAREDBY 審核 CHECKEDBY 批准 APPROVEDBY 客戶承認 CUSTOMERAPPROVE 尹艺王镇生蔡纪雨 东莞市泛亚电子有限公司 DongguanFANYAElectronicsCo.,LTD 公司地址：东莞市石碣镇刘屋科技东路194号 TEL：0769-22490287/22452492 FAX：0769-22499451 E-mail：[email protected] Page2 of 4 DongguanFANYAElectronicsCo.,LTD 东莞市泛亚电子有限公司TEL：0769-22490287FAX：0769-22499451FY-GZ001 版本變更履歷 VersionChangeHistory 版本 Rev. 變更前 BeforeChange 變更後 AfterChange 更改日期 ChangeDate 批准 ApprovedBy A.0 新发行 ----2024/06/19 蔡纪雨 Page3 of 4 DongguanFANYAElectronicsCo.,LTD 东莞市泛亚电子有限公司TEL：0769-22490287FAX：0769-22499451FY-GZ001 SPECIFICATION 産品型號： DESC FYN00612024061901L 版本 Rev：A.0 客戶CUST: N006 泛亚料号FineP/N： 客户料号CUSTP/N: E28A-00005 一、尺寸DIMENSION:(mm) 二、原理图SCHEMATICDIAGRAM: A 20.5±0.5 B 39.5±1.0 C 0.75±0.1 D 50±2 E 2-4 F 43.5±0.5 G 1.85MAX（不含离型纸） 注： 1.线圈交叉出线； 2.线圈出线位置贴8mm宽高温 胶1.5TS。 3. 线圈反贴黑膜面，硬磁片尺 寸φ43.5*5.0*0.4mm开孔开双 线槽，中间贴φ18*0.75mm小磁 片。 4.磁片背面贴φ42*6*0.08mm 开孔带手撕位普通双面背胶，小 磁片贴15*0.08mm普通背胶； 5.引线需穿长度47±2mmUL管； 三、绕线参数WindingSpecification: 序号 NO. 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 WindingDirection 1SFLitz0.08*72P10TsCCW 四、电气特性ELECTRICALCHARACTERISTICS: 温度TEMPERATURE:25±10°C,湿度RELATIVEHUMIDITY:65±20% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS 1IND.S-F 6.5u H±10%100KHz/1.0VTH2829LX 2 DCRS-F85mΩMax @25°C TH2829LX 擬制/日期 PREPAREDBY/DATE 審核/日期 CHECKEDBY/DATE 尹艺2024/06/19蔡纪雨2024/06/19 Page4 of 4 DongguanFANYAElectronicsCo.,LTD 东莞市泛亚电子有限公司TEL：0769-22490287FAX：0769-22499451FY-GZ001 SPECIFICATION 産品型號： DESC FYN00612024061901L 版本 Rev：A.0 客戶CUST: N006 泛亚料号FineP/N： 客户料号CUSTP/N:E28A-00005 五、包装PACKING: 5.1包装图片Packingpictures: 5.2包装数量及规格PackingQuantity: 5.3包装以现有包装盘为参照标准，以实际出货包装为准,如有特需要求可以定制。 Thepackagingshallbebasedontheexistingpackingplateandtheactualdeliverypackageshallprevail.If thereisanyrequirement,wecancustomizeit. 六、材料清单Materiallist: 序号 number 材料名称 Materialname 品名描述 Description 制造商 Manufacturer 1线材Litz0.08*72P 2 无铅锡条无铅锡条 3 磁片+黑膜φ43.5*5.0*0.4mm，开孔开双线槽 4 高温胶8mm宽的高温胶 5 普通背胶φ42*6*0.08mm带手撕位普通背胶 6 小磁片18*0.75mm 7 背胶15*0.08mm带手撕位普通背胶 8 套管 47±2mm 项目Item数量Quantity材料规格Material 盘Box 200Pcs370*265*55mm 箱BigCarton 1000Pcs420*270*310mm 擬制 / 日期 PREPAREDBY/DATE 審核 / 日期 CHECKEDBY/DATE 尹艺 2024/06/19 蔡纪雨 2024/06/19

1 / 6 零 件 承 认 书 Part acknowledgement 供 应 商 全 称Full name of supplier：： 东莞捷瑞思科技有限公司 Dongguan Jerice Technology Co. , Ltd. 供 应 商 地 址Address of supplier：东莞市大岭山朗湖路96号（金雄达科技园L栋3楼） 96 Long Wu Road, Tai Ling Shan, Dongguan (3F, building L, Kam Hung Tat Science and Technology Park) 物 料 名 称Name of material： 手表线圈 物 料 规 格Material specifications：硬磁(压铸款)25*2.6mm 0.08*24P 7.7uH-8.0uH 单股双层 带N52磁铁 磁 力3400Gs±200Gs 带背胶 L=170mm两条出线套热缩管 机 种 型 号Type and model: W365 客 户 名 称Customer name : 络鑫股份 客 户 料 号Customer data:: E28-00030 送 样 时 间Sample delivery time: 2024年1月09日 备注: Notes: 新物料：New materials： 替代料Alternative： 承认结果 Acknowledge the results 合格 Qualified 不合格 Disqualified 不合格原因 Reasons for non-conformance： 不合格承认书及样品处理方式 Acceptance of non-conformance and sample handling： 退回采购 Return purchase 销毁处理 Disposal 供应商签章Signature of supplier 承认签章 Recognize the signature 申请人 Applicant 品质 Quality 核准 Approved 申请人 pplicant 测试员 Tester 工程 Project 品质 Quality 核准 Approved 陆琳 梁梅香 陆如圣 承认章 Recognition Stamp 承认章 Recognition Stamp 日期Date : 2024.01.09 日期Date : 2 / 6 一、目录：Table of contents 1. 封面Cover............................................................第1-1页 2. 目录Table of contents ................................................第2-2页 3. 产品图Product drawings .............................................第3-3页 4. 平面结构图A plan ................................................第4-4页 5. 产品参数Product parameters..........................................第5-5页 6. 电性参数Electrical parameters.......................................第5-5页 7. 材料清单Bill of materials.............................................第5-5页 8. 包装Packaging.........................................................第6-6页 3 / 6 二、产品图面Product drawing： 4 / 6 三、平面结构图A plan： 单位:MM A C G K J I H M F L A B C D E F H I J 7.65±0.05 2.5±0.05 2±1 15±0.2 20.7±0.3 21±0.2 23.5±0.3 25±0.2 2.6+±0.15 2.5±0.15 中柱高度 K 磁铁 1 2 1 2 170±2 L B D 7.7±0.05 14.5±0.1 M G 5 / 6 四．产品参数Product parameters： 圈数 Number of turns 线径 Diameter of the line 绕线方式 疏/密The way of winding is sparse/dense 绕线方向Direction of winding 相交 是/否 Intersection yes/No 线圈 正/反贴 Positive/negative coil 14TS 0.08*24P热风绞 合线 密绕Encircling 逆时针 Counterclockwise 是yes 反贴Counter-post 所有材料要求合格 ROHS标准All materials required to meet ROHS standards 五．电气特性Electrical characteristics 温度：25º±10C湿度：65º±10%Temperature: 25O ± 10c humidity: 65o ± 10% 序号 Serial number 项目Project 端子 Terminal 标准Standards 测试条件Test conditions 测试仪器Test equipment 1 IND 1-2 线脚加磁片： 电感：7.7~8.0 uH Q值：≧25 DCR值：0.05Ω±5% 1kHz/V LCZ METER 1062 六．材料清单Bill of materials： 序号 Serial number 材料名称 Name of material 品名描述 Description of product name 物料代码 Material Code 厂商代码 Vendor Code 1 线材Wire 0.08*24P热风绞合线 JR-RQ-0046 WH 2 铁氧体 Ferrite 25*2.6*7.7硬磁（压铸款） G25-2.5-1002 TK 3 双面胶 Double-sided glue 513-14MM（带手撕) OT-14 HH 4 套管 Casing 0.8*165MM-耐高温125度 TJ-0004 GK 5 胶水 Glue 透明胶 BI-0001 BY 6 锡条 T in strips 环保无铅焊锡条Environmentally friendly lead-free solder rod SC-001 QD 6 / 6 七、包装Packaging： 图1：单层泡棉托盘，1盒包装240PCS Figure 1: Single-layer foam tray, 1 box packing 240 pcs 图2：统一方向线头朝上整齐排放入盘中 Figure 2: Uniform Direction Line head up neatly into the disk 图3：放入包装箱，每箱放置10层 Figure 3: put into the packing box, each box put 10 layers 图 4 ：封箱，用透明胶封箱 Figure 4: sealing the box with transparent glue 图5：包装箱贴标签 Figure 5: Packaging label 图6：物料堆放，整齐，标签往外方便寻找物 料 Figure 6: materials stacked, neat, labels to facilitate the search for materials

CERPASS TECHNOLOGY CORP. Report No.: 24030167-DRFCC01 Cerpass Technology Corp. Issued Date : Aug. 07, 2024 D-FD-514-0 V1.1 Page No. : 1 of 27 FCC RADIO TEST REPORT Applicant : Kaijet Technology International Corporation Address : 8F., No. 109, Zhongcheng Road, Tucheng Dist., New Taipei City, Taiwan R.O.C Equipment : Qi2 3-in-1 Magnetic Foldable Wireless Charging Station Model No. : JUPW3415, JUPW3415YPZ (All model provide with main wireless charging stand product; Y can be blank, A to Z represent different appearance colour; P can be blank, with or without for marketing purpose only; Z can be blank, A to Z, a to z, 0-9 represent non-power related accessory(s) included in box) Trademark : j5create FCC ID : 2AD37JUPW3415 I HEREBY CERTIFY THAT: The sample was received on Jun. 14, 2024 and the test items were conducted during Jul. 03, 2024~ Aug. 01, 2024 at Cerpass Technology Corp. The test result refers exclusively to the test presented test model / sample. Without written approval of Cerpass Technology Corp., the test report shall not be reproduced except in full. Approved by: Leevin Li / Supervisor CERPASS TECHNOLOGY CORP. Report No.: 24030167-DRFCC01 Cerpass Technology Corp. Issued Date : Aug. 07, 2024 D-FD-514-0 V1.1 Page No. : 2 of 27 Contents 1. Report of Measurements and Examinations .................................................................................... 4 1.1 List of Measurements and Examinations ................................................................................... 4 2. Test Configuration of Equipment under Test ................................................................................... 5 2.1 Feature of Equipment under Test ............................................................................................... 5 2.2 Description of the test mode ...................................................................................................... 6 2.3 Description of Test System ......................................................................................................... 8 2.4 General Information of Test ........................................................................................................ 9 2.5 Measurement Uncertainty .......................................................................................................... 9 3. Test Equipment and Ancillaries Used for Tests ............................................................................. 10 4. Antenna Requirements ..................................................................................................................... 11 4.1 Standard Applicable ................................................................................................................. 11 4.2 Antenna Construction ............................................................................................................... 11 4.3 Result ....................................................................................................................................... 11 5. Test of Conducted Emission ............................................................................................................ 12 5.1 Test Limit .................................................................................................................................. 12 5.2 Test Procedures ....................................................................................................................... 12 5.3 Typical Test Setup .................................................................................................................... 13 5.4 Test Result and Data ................................................................................................................ 14 6. Test of Radiated Emission ............................................................................................................... 16 6.1 Test Limit .................................................................................................................................. 16 6.2 Test Procedures ....................................................................................................................... 17 6.3 Typical Test Setup ................................................................................................................... 18 6.4 Test Result and Data ............................................................................................................... 19 7. 20dB Bandwidth ................................................................................................................................ 25 7.1 Test Limit .................................................................................................................................. 25 7.2 Test Procedures ....................................................................................................................... 25 7.3 Typical Test Setup ................................................................................................................... 25 7.4 Test Result and Data ............................................................................................................... 26 CERPASS TECHNOLOGY CORP. Report No.: 24030167-DRFCC01 Cerpass Technology Corp. Issued Date : Aug. 07, 2024 D-FD-514-0 V1.1 Page No. : 3 of 27 History of this test report  Original.  Additional attachment as following record: Attachment No. Issue Date Description 24030167-DRFCC01 Aug. 07, 2024 Initial Issue CERPASS TECHNOLOGY CORP. Report No.: 24030167-DRFCC01 Cerpass Technology Corp. Issued Date : Aug. 07, 2024 D-FD-514-0 V1.1 Page No. : 4 of 27 1. Report of Measurements and Examinations 1.1 List of Measurements and Examinations FCC CFR Title 47 Part 15 Subpart C Section 15.209 FCC Rule . Description of Test Result §15.203 . Antenna Requirement Pass §15.207(a) . Conducted Emission Pass §15.209(a) . Radiated Emission Pass §15.215 20dB Bandwidth Pass Note: Deviations Yes  No  *T…

Text truncated - open the document above for the full version.

CERPASS TECHNOLOGY CORP. Report No.: 24030167 CERPASS TECHNOLOGY CORP. Issued date : Aug. 07, 2024 Page No. : 1 of 2 TEST SETUP PHOTOGRAPHS OF EUT AC POWER LINE CONDUCTED EMISSION TEST Front View Side View CERPASS TECHNOLOGY CORP. Report No.: 24030167 CERPASS TECHNOLOGY CORP. Issued date : Aug. 07, 2024 Page No. : 2 of 2 RADIATED EMISSION TEST Below 30MHz Above 30MHz