2ADH6-1310092Watch Charger

E-filliate Incorporated 2.911(d)(7)USAAgentv1.4 Section 2.911(d) (7) USA Agent for Service of Process Company name: E-filliate Incorporated Address:11321 White Rock Rd. Rancho Cordova, CA. 95742, USA Product Name:Watch Charger FCC ID:2ADH6-1310092 Model(s):131 0092 2.911(d) (7) USA Designated Agent for Service of Process We, [E-filliate Incorporated] (“the applicant”) designate [ E-filliateIncorporated] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent:We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process inthe United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S.,orthe conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation:We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the granteehas permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: E-filliate Incorporated Address: 11321 White Rock Rd. Rancho Cordova, CA. 95742, USA FRN: 0024051138 Contact Name: Wesley Kenji Sumida Telephone No: 916 858 1000 Email: [email protected] Applicant Company name: E-filliate Incorporated Address:11321 White Rock Rd. Rancho Cordova, CA. 95742, USA FRN: 0024051138 FCC Grantee Code:2ADH6 Contact Name: Wesley Kenji Sumida Telephone No: 916 858 1000 Email: [email protected] E-filliate Incorporated 2.911(d)(7)USAAgentv1.4 Signature: Title: Product Manager Signature: Title: Product Manager Date: 2026.06.27Date:2026.06.27 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Rev1/26/2023 E-filliateIncorporated FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:06-27-2026 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2ADH6-1310092 (“E-filliateIncorporated”)certifiesthattheequipmentforwhichauthorizationissoughtisnot“covered” equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903oftheFCC rules. (“E-filliateIncorporated”)certifiesthattheequipmentforwhichauthorizationissoughtdoesnotinclude cybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab,Inc.oranyofitssuccessors andassignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyofitssuccessorsand assignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB986446D01Covered EquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, (Applicantsignature)WesleyKenjiSumida (Applicantprintedname) Rev1/26/2023 E-filliateIncorporated FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:06-27-2026 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2ADH6-1310092 (“E-filliateIncorporated”)certifiesthat,asofthedateofthefilingoftheapplication,E-filliate IncorporatedisnotidentifiedontheCoveredList(asaspecificallynamedentityoranyofitssubsidiaries oraffiliates)asanentityproducing“covered”equipment. Sincerely, (Applicantsignature) (Applicantprintedname)WesleyKenjiSumida

E-filliateIncorporated Date ： 06-27-2026 Product/ModelNumber:WatchCharger /1310092 Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C. CanadaV5J5K5toactonourbehalfonallmattersconcerningtheabove namedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatQAILaboratoriesLtd.isallowedtoforwardallinformation relatedtotheapprovalprojecttotheappliedcertificationbodyandtothe notificationentitiesandtodiscussanyissuesconcerningtheapproval application.AnyandallactscarriedoutbyQAILaboratoriesLtd.onour behalfshallhavethesameeffectasactsofourown. By:WesleyKenjiSumida ContactListedonFCCWesbite Title:ProductManager Email:[email protected] Telephone:9168581000 Onbehalfof:E-filliateIncorporated

E-filliateIncorporated OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:June27,2026 Subject;RequestforConfidentiality FCCID:2ADH6-1310092 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNIIdevices Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:WesleyKenjiSumida Title:ProductManager

E-filliateIncorporated ProductSimilarityDeclaration Productname:WatchCharger Modelname:1310092,1310092TD2,1310092TD3,131 0092TDX,1310092TG3,1310092TG4,1310092TGX,131 0092FB2,1310092FBX.(“X”or“XXX"=0-9,A-Zor blankformarketingpurpose). FCCID:2ADH6-1310092 We(E-filliateIncorporated)herebystatethatallthemodelsare electricalidenticalincludingthesamesoftwareparameterand hardwaredesign(i.e.,circuitdesign,PCBLayout,RF module/circuit,antennatype(s)andantennalocation,components onPCB,etc.,),samemechanicalstructureanddesign(including productenclosure,materials,etc.,),theonlydifferenceisthe modelnumberandcolour. Signature: Name:WesleyKenjiSumida Title:ProductManager Place,date:RanchoCordova,2026.06.27

Label:

MPE REPORT Watch Charger MODEL No.: 131 0092 FCC ID: 2ADH6-1310092 REPORT NO.: SZNTT26023853E1-2 ISSUE DATE: Jun. 12, 2026 Preparedfor E-filliate Incorporated 11321 White Rock Rd. Rancho Cordova, CA. 95742, USA Preparedby Shenzhen NTT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, China TEL: 0755-27889935 Report No.: SZNTT26023853E1-2 SZNTT-TR825-0Page 2 of 16 Hotline:0755-27889935http://www.ntt-testing.com TABLE OF CONTENT Test Report DescriptionPage 1. SUMMARY OF TEST RESULT.....................................................................................................4 2. GENERAL INFORMATION............................................................................................................5 2.1. DESCRIPTION OFDEVICE(EUT).................................................................................................................................5 2.2. T ESTSETUP.................................................................................................................................................................6 2.3. D ESCRIPTION OFTESTFACILITY.................................................................................................................................7 2.4. M EASUREMENTUNCERTAINTY....................................................................................................................................7 3. MEASURING DEVICE AND TEST EQUIPMENT......................................................................8 3.1. FORMPE MEASUREMENT.......................................................................................................................................... 8 4. RF EXPOSURE................................................................................................................................9 4.1. MEASURINGSTANDARD...............................................................................................................................................9 4.2. R EQUIMENTS................................................................................................................................................................9 4.3. T EST CONFIGURATION............................................................................................................................................... 10 4.4. L IMITS.........................................................................................................................................................................11 4.5. T ESTMODES:.............................................................................................................................................................12 4.6. D ESCRIPTION OFSUPPORTUNIT..............................................................................................................................12 4.7. M EASURINGRESULTS............................................................................................................................................... 13 5. PHOTOGRAPHS OF TEST SETUP...........................................................................................14 Report No.: SZNTT26023853E1-2 SZNTT-TR825-0Page 3 of 16 Hotline:0755-27889935http://www.ntt-testing.com TEST REPORT DESCRIPTION Applicant: E-filliate Incorporated Address: 11321 White Rock Rd. Rancho Cordova, CA. 95742, USA Manufacturer: ShenZhen Sunlike Technology Co.,Ltd. Address: Building 9, TongFuCun Industrial Zone, Dalang Street, Longhua District,Shenzhen City, China EUT: Watch Charger Model Name: 131 0092 Trademark: N/A Measurement Procedure Used: FCC Part 1(1.1310) and Part 2(2.1091)&Part 2(2.1093) KDB 680106 D01 Wireless Power Transfer v04 The device described above is tested by Shenzhen NTT Testing Technology Co., Ltd. to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The measurement results are contained in this test report and Shenzhen NTT Testing Technology Co., Ltd. is assumed full of responsibility for the accuracy and completeness of these measurements. Also, this report shows that the EUT (Equipment Under Test) is technically compliant with the FCC requirements. This report applies to above tested sample only and shall not be reproducedin part without written approval of Shenzhen NTT Testing Technology Co., Ltd. Prepared by(Test Engineer): Cindy Qin Reviewer(Supervisor): Ken Wu Approved(Manager): Abel Yu Report No.: SZNTT26023853E1-2 SZNTT-TR825-0Page 4 of 16 Hotline:0755-27889935http://www.ntt-testing.com 1. SUMMARY OF TEST RESULT EMISSION Description of Test ItemStandard & LimitsResults MPE FCC Part 1(1.1310) and Part 2(2.1091) and Part 2(2.1093) KDB 680106 D01 Wireless Power Transfer v04 Pass Note: N/A is an abbreviation for Not Applicable. Report No.: SZNTT26023853E1-2 SZNTT-TR825-0Page 5 of 16 Hotline:0755-27889935http://www.ntt-testing.com 2. GENERAL INFORMATION 2.1.Description of Device (EUT) EUT: Watch Charger Model Number: 131 0092, 131 0092 TD2, 131 0092 TD3, 131 0092 TDX, 131 0092 TG3, 131 0092 TG4, 131 0092 TGX, 131 0092 FB2, 131 0092 FBX. (“X” or “XXX"= 0-9, A-Z or blank for marketing purpose). Difference: The PCB board, circuit, structure and internal of these modelsarethesame,Only model number and colour is different for these model. Power Rating: Input:5V⎓3A, 9V⎓3A, 15V⎓3A, 20V⎓5.0A, Cable Output: PD95W Max. Wireless Output: 5W Max. Operation Frequency for WPT : 300-350kHz Modulation: MSK Antenna Type:: Coil Antenna Date of Received : Jun. 01, 2026 Date of Test: Jun. 02, 2026 to Jun. 12, 2026 Report No.: SZNTT26023853E1-2 SZNTT-TR825-0Page 6 of 16 Hotline:0755-27889935http://www.ntt-testing.com 2.2.Test Setup For mobile exposure conditions: Notes: The EHP 200A Probe has a diameter of 10.9cm and a radius of 5.45cm Report No.: SZNTT26023853E1-2 SZNTT-TR825-0Page 7 of 16 Hotline:0755-27889935http://www.ntt-testing.com 2.3.Descriptio…

Text truncated - open the document above for the full version.

ProductRecognitionCertificate SpecificationNumber HG2026042701 Availabilitydate Customername ShenzhenHuiyaoElectronicsCo.,Ltd. Producttype AppleHard-MagneticWatchCoil:LengthL=8mm HongguiMaterialNumber 15*0.08*24P*10TS-5.4UH-8MM CustomerMaterialNumber Newversionreleased □ VersionRevision:[Thisspecificationincludesatableofcontentsspanning2pages.][RoHS-compliantParts] Prepare Examineandverify Ratify PengJianji AnfuHongguiElectronicsCo.,Ltd. Building2,NewEnergyIndustrialPark,NorthYangmeilingArea,ZhouhuTown,AnfuCounty,Ji'anCity,JiangxiProvincePengJianji:13907060771 Thisacknowledgmentformmustbesignedandreturnedwithinoneweekofthecustomer'sreceipt. Failuretodosowillresultinproductionproceedingaccordingtothestandardsspecifiedherein. [CustomerApproval]date： RecognitionStatus:□FullAdmission□conditionacceptance□Refusaltoacknowledge Ratify Examineandverify RecheckCheckup explain： Specification Customername ShenzhenHuiyaoElectronicsCo.,Ltd. CustomerMaterialNumber HongguiMaterialNumber 15*0.08*24P*10TS-5.4UH-8MM SpecificationNumber HG2026042701 Edition 01 ♦outlinedimension （unit：mm） A7.5±0.3 B15.0±0.5 C20.0±0.5 D23.5±0.5 E8±2 F3.0 ±1 G 2.5 ±0.2 (1)Wirediameter:0.08*24Phot-airself-adhesivecopperwire (2)Numberofwindings:10TS (3)Withadiameterof7.5mmandathicknessof2.0mm,madefrom3200GS high-strengthmagneticmaterial (4)Back-sideadhesive:19mmdiameter,whiteroundshape ParameterSpecificationsTestcondition Measuringandtest instruments B B L0 5.4±0.3μH 100KHz/1V ■TH1816 ■TH1816 Q 25min100KHz/1V DCR <100mΩ100KHz/1V Servicetemperature -40°C~125°C ♦、billofmaterial： Ordernumber 1 Nameofapart MaterialspecificationSupplier Remarks 2 Magneticsheet 24.5*8*2.6 LZ 3 Copperline 0.08*24P CX 4 TinHigh-temperaturetinbar DB 5 GlueBE885-9007 BR 6 Strongmagnetism 7.5*2/3200GS XF Prepare ExamineandverifyRatify PengJianji

FCC PART 15 SUBPART C Watch Charger MODEL No.: 131 0092 FCC ID:2ADH6-1310092 REPORT NO.: SZNTT26023853E1-1 ISSUE DATE: Jun. 12, 2026 Preparedfor E-filliate Incorporated 11321 White Rock Rd. Rancho Cordova, CA. 95742, USA Preparedby Shenzhen NTT Testing Technology Co., Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, China TEL: 0755-27889935 Report No.: SZNTT26023853E1-1 SZNTT-TR825-0Page 2 of 26 Hotline:0755-27889935http://www.ntt-testing.com TABLE OF CONTENT Test Report DescriptionPage 1. SUMMARY OF TEST RESULTS............................................................................................................................5 2. GENERAL INFORMATION....................................................................................................................................6 2.1. Description of Device (EUT)............................................................................................................................ 6 2.2. Description of Support Units............................................................................................................................6 2.3. Independent Operation Modes........................................................................................................................ 7 2.4. Test Mode........................................................................................................................................................ 8 2.5. Description of Test Facility............................................................................................................................... 8 2.6. Measurement Uncertainty................................................................................................................................9 3. MEASURING DEVICE AND TEST EQUIPMENT................................................................................................10 4. 20DB BANDWIDTH.............................................................................................................................................12 4.1. Test Procedure...............................................................................................................................................12 4.2. Test Setup......................................................................................................................................................12 4.3. Test Results................................................................................................................................................... 12 5. POWER LINE CONDUCTED EMISSION MEASUREMENT............................................................................... 13 5.1. Block Diagram of Test Setup..........................................................................................................................13 5.2. Limits............................................................................................................................................................. 13 5.3. Test Procedure...............................................................................................................................................13 5.4. Measuring Results.........................................................................................................................................14 6. RADIATED EMISSION TEST...............................................................................................................................17 6.1. Measurement Procedure............................................................................................................................... 17 6.2. Test SET-UP (Block Diagram of Configuration)............................................................................................. 17 6.3. Radiated Emission Limit................................................................................................................................ 18 6.4. Measurement Result......................................................................................................................................20 7. TEST PHOTOGRAPHS AND EUT PHOTOGRAPHS..........................................................................................26 Report No.: SZNTT26023853E1-1 SZNTT-TR825-0Page 3 of 26 Hotline:0755-27889935http://www.ntt-testing.com TEST REPORT DESCRIPTION Applicant: E-filliate Incorporated Address: 11321 White Rock Rd. Rancho Cordova, CA. 95742, USA Manufacturer: ShenZhen Sunlike Technology Co.,Ltd. Address: Building 9, TongFuCun Industrial Zone, Dalang Street, Longhua District, Shenzhen City, China EUT: Watch Charger Model Name: 131 0092 Trademark: N/A Measurement Procedure Used: APPLICABLE STANDARDS STANDARDTEST RESULT FCC47CFRPart15,SubpartC PASS The above equipment was tested by Shenzhen NTT Testing Technology Co., Ltd.The test data, data evaluation, test procedures, and equipment configurations shown in thisreport were made in accordance with the procedures given in ANSI C63.10-2020+Cor.1-2023 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15C The test results of this report relate only to the tested sample identifiedin this report. Prepared by(Test Engineer): Cindy Qin Reviewer(Supervisor): Ken Wu Approved(Manager): Abel Yu Report No.: SZNTT26023853E1-1 SZNTT-TR825-0Page 4 of 26 Hotline:0755-27889935http://www.ntt-testing.com Modified Information VersionReport No.Revision DataSummary Ver.1.0SZNTT26023853E1-1Jun. 12, 2026Original Version Report No.: SZNTT26023853E1-1 SZNTT-TR825-0Page 5 of 26 Hotline:0755-27889935http://www.ntt-testing.com 1. SUMMARY OF TEST RESULTS Test ItemSection in CFR 47Result Antenna requirement15.203Pass AC Power Line Conducted Emission 15.207Pass Spurious Emissio…

Text truncated - open the document above for the full version.