2ADINS6701LLTE Smart Phone

Sun Cupid Technology (HK) Ltd.

Click to zoom

Application Details

Equipment Class: NII - Unlicensed National Information Infrastructure TX
Date of Grant: Sep 04, 2021
Application Purpose: Original Equipment
Date of Application: Sep 03, 2021
Equipment Note: LTE Smart Phone
Frequency Range: 5745.00000000 - 5825.00000000
Company: Sun Cupid Technology (HK) Ltd.
Country: Hong Kong

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

Getting Started With Your 4G LTE mobile phone Model: B15, S6701L 3 Front/Back B15 OverviewIndex B15 Overview 3 Setting Up Your Phone 4 Safety Information 6 Certificate 10 Warranty Information & Registration 14 Customer Support 15 To p Bottom Main camera Bokeh camera Wide angle camera Macro camera flash AUX-In/ Headset jack USB Type-C connector Wake/ Sleep button Microphone Microphone Volume control Front camera Earpiece Speaker 45 Setting Up Your Phone Follow these step-by-step instructions to set up your B15. Power off the phone before inserting any cards! Warning: SIM cards are small enough to become a choking hazard, so please keep them away from children & pets. SIM cards are also quite delicate. Please be careful when handling your card. Remove SIM Tray • Remove the SIM tray by inserting a pin eject key/ paper clip in the small circular hole at the bottom of the tray. The tray will then eject from the phone. Configuration 2: microSD™ Card • Orient microSD card to match layout on tray. • microSD card supports up to 512GB Configuration 1: Dual SIM Standby • Orient SIM card to match layout on tray. • SIM 1 (Nano) supports 4GLTE connections. • SIM 2 (Nano) supports 4GLTE connections. Replace SIM Tray • After placing the SIMs and/or memory card in the tray, slide it back into its slot. It will click and hold in place. Charge/Sync • Plug in the type C connector to charge the phone or transfer data. 1 3 2 4 5 3 2 5 1 67 Safety information • This section contains important information about the operation of your device, it also contains information about how to use the device safely. Read this information carefully before using your device. Electronic device Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices. Interference with medical equipment • Follow rules and regulations set forth by hospitals and health care facilities. Do not use your device where prohibited. • Some wireless devices may affect the performance of hearing aids or pacemakers. Consult your service provider for more information. • Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket. Protecting your hearing when using a headset • To prevent possible hearing damage, do not listen at high volume levels for long periods. • Using a headset at high volumes may damage your hearing. To reduce this risk, lower the headset volume to a safe and comfortable level. • Exposure to high volumes while driving may cause distraction and increase your risk of an accident. Areas with flammables and explosives • Do not use the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. In addition, follow the instructions indicated in text or symbols. • Do not store or transport the device in containers with flammable liquids, gases, or explosives. Traffic security • Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving. • Concentrate on driving. Your first responsibility is to drive safely. • Do not hold the device while driving. Use hands-free accessories. • When you must make or answer a call, pull off the road safely and park the vehicle first. • RF signals may affect the electronic systems of motor vehicles. For more information, consult the vehicle manufacturer. • Do not place the device over the air bag or in the air bag deployment area in a motor vehicle. Doing so may hurt you because of the strong force when the air bag inflates. • Wireless devices may interfere with the airplane’s flight system. Do not use your device where wireless devices are not allowed according to the airplane company’s regulations. Operating environment • Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device in these environments may result in circuit malfunctions. Do not use your device during thunderstorms to protect your device against any danger caused by lightning. • Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -20 °C to 45 °C. Extreme heat or cold may damage your device or accessories. • Do not expose your device to direct sunlight (such as on a car dashboard) for prolonged periods. • To protect your device or accessories from fire or electrical shock hazards, avoid rain and moisture. • Keep the device away from sources of heat and fire, such as a heater, microwave oven, stove, water heater, radiator, or candle. • Do not place sharp metal objects, such as pins, near the earpiece or speaker. The earpiece may attract these objects and result in injury. • Stop using your device or applications for a while if the device is overheated. If skin is exposed to an overheated device for an extended period, low temperature burn symptoms, such as red spots and darker pigmentation, may occur. • Do not use your device’s camera flash directly in the eyes of people or pets. Otherwise temporary loss of vision or damage to the eyes may occur. • Do not touch the device’s antenna. Otherwise, communication quality may be reduced. • Do not allow children or pets to bite or suck the device or accessories. Doing so may result in damage or explosion. • Observe local laws and regulations, and respect the privacy and legal rights of others. Child safety • Comply with all precautions with regard to child’s safety. Letting children play with the device or its accessories may be dangerous. The device includes detachable parts that may present a choking hazard. Keep away from children. • The device and its accessories are not intended for use by children. Children should only use …

Text truncated - open the document above for the full version.

Cover Letter(s)

SunCupidTechnology(HK)Ltd DATE:2021-9-1 FederalCommunicationsCommission Authorization&EvaluationDivision 7345OaklandMillsRoad Columbia,Maryland21046 AuthoritytoActasAgent Onourbehalf,IappointJianYanTestingGroupShenzhenCo.,Ltd.; No.101,Building8,InnovationWisdomPort,No.155HongtianRoad,HuangpuCommunity, XinqiaoStreet,Bao’anDistrict,Shenzhen,Guangdong,People’sRepublicofChina.;Bruce.Zhang, toactasouragentinthepreparationofthisapplicationforequipmentcertification.I certifythatsubmitteddocumentsproperlydescribethedeviceorsystemforwhich equipmentcertificationissought.Ialsocertifythateachunitmanufactured,importedor marketed,asdefinedintheFederalCommunicationsCommission’sregulationswill haveaffixedtoitalabelidenticaltothatsubmittedforapprovalwiththisapplication. Forinstanceswhereourauthorizedagentsignstheapplicationforcertificationonourbehalf,I acknowledgethatallresponsibilityforcomplyingwiththetermsandconditionsforcertification, asspecifiedbyNemkoCanadaInc,stillresideswith SunCupidTechnology(HK)Ltd, 16/F,CEOTower,77WingHongStreet,CheungShaWan,Kowloon,HongKong. Dated this 2021-9-1 By: DannySit SignaturePrinted Title: Manager Onbehalfof: SunCupidTechnology (HK)Ltd. Telephone: +852-27250161

Cover Letter(s)

SunCupidTechnology(HK)Ltd DATE:2021-9-1 EquipmentAutorisationDivision FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 FCCID:2ADINS6701L ProductName:LTESmartPhone RequestforConfidentiality PursuanttoSections0.457and0.459ofthecommissionsrules,weherebyrequestthat thefollowingdocumentsbeheldconfidential: Schematics Blockdiagram  Operationdescription BOM  Turnup Thesematerialscontaintradesecretsandproprietaryinformationandarenot customarilyreleasedtothepublic.Thepublicdisclosureofthisinformationmightbe harmfultothecompanyandprovideunjustifiedbenefitstoourcompetitors. Dated this 2021-9-1 By: DannySit SignaturePrinted Title: Manager Onbehalfof: SunCupidTechnology(HK) Ltd. Telephone: +852-27250161

External Photos

ID Label/Location Info

Label： Location:

Internal Photos

Report No: JYTSZB-R12-2101402 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107071 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 27 of 34 Report No: JYTSZB-R12-2101402 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107071 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 28 of 34 Report No: JYTSZB-R12-2101402 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107071 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 29 of 34 Report No: JYTSZB-R12-2101402 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107071 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 30 of 34 Report No: JYTSZB-R12-2101402 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107071 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 31 of 34 Report No: JYTSZB-R12-2101402 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107071 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 32 of 34 Report No: JYTSZB-R12-2101402 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107071 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 33 of 34 Report No: JYTSZB-R12-2101402 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107071 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 34 of 34 ------End of report------

RF Exposure Info

JianYan Testing Group Shenzhen Co., Ltd. Report No: JYTSZB-R14-2100165 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the JYT product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC SAR REPORT Applicant: Sun Cupid Technology (HK) Ltd. Address of Applicant: 16/F, CEO Tower, 77 Wing Hong Street, Cheung Sha Wan, Kowloon, Hong Kong. Equipment Under Test (EUT) Product Name: LTE Smart Phone Model No.: S6701L, B15 Trade mark NUU FCC ID: 2ADINS6701L Applicable standards: FCC 47 CFR Part 2.1093 Date of Test: 09 Aug., 2021 ~ 19 Aug., 2021 Test Result: Maximum Reported 1-g SAR (W/kg) Head: 0.574 Body: 0.619 Hotspot: 0.779 Report No: JYTSZB-R14-2100165 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107072 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community,Xinqiao Street, Bao'an District, Shenzhen, Guangdong,People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 2 of 229 2 Version Version No. Date Description 00 27 Aug., 2021 Original Tested by: Date: 27 Aug., 2021 Test Engineer Reviewed by: Date: 27 Aug., 2021 Project Engineer Report No: JYTSZB-R14-2100165 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107072 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community,Xinqiao Street, Bao'an District, Shenzhen, Guangdong,People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 3 of 229 3 Contents 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 SAR RESULTS SUMMARY ................................................................................................................................. 5 5 GENERAL INFORMATION .................................................................................................................................. 7 5.1 CLIENT INFORMATION ..................................................................................................................................................................... 7 5.2 GENERAL DESCRIPTION OF EUT ................................................................................................................................................... 7 5.3 MAXIMUM RF OUTPUT POWER ...................................................................................................................................................... 9 5.4 ENVIRONMENT OF TEST SITE ....................................................................................................................................................... 10 5.5 TEST SAMPLE PLAN ..................................................................................................................................................................... 10 5.6 TEST LOCATION ........................................................................................................................................................................... 10 6 INTRODUCTION ................................................................................................................................................. 11 6.1 INTRODUCTION ............................................................................................................................................................................. 11 6.2 SAR DEFINITION .......................................................................................................................................................................... 11 7 RF EXPOSURE LIMITS ..................................................................................................................................... 12 7.1 UNCONTROLLED ENVIRONMENT ................................................................................................................................................... 12 7.2 CONTROLLED ENVIRONMENT ....................................................................................................................................................... 12 7.3 RF EXPOSURE LIMITS .................................................................................................................................................................. 12 8 SAR MEASUREMENT SYSTEM ....................................................................................................................... 13 8.1 E-FIELD PROBE..............................................................................................................................…

Text truncated - open the document above for the full version.

RF Exposure Info

Report No: JYTSZB-R14-2100165 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107072 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community,Xinqiao Street, Bao'an District, Shenzhen, Guangdong,People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 121 of 229 SAR Measurement at Band4_WCDMA1700 (Body, Validation Plane) Date of measurement: 18/8/2021 A. Experimental conditions. Probe SN 18/21 EPGO354 ConvF 2.07 Area Scan surf_sam_plan.txt Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm,Complete Phantom Validation plane Device Position Body Band Band4_WCDMA1700 Channels Middle Signal WCDMA (Crest factor: 1.0) B. Permitivity Frequency (MHz) 1732.599976 Relative permitivity (real part) 39.856951 Conductivity (S/m) 1.358307 C. SAR Surface and Volume SURFACE SAR VOLUME SAR Maximum location: X=-11.00, Y=-29.00 ; SAR Peak: 0.58 W/kg D. SAR 1g & 10g SAR 10g (W/Kg) 0.216545 SAR 1g (W/Kg) 0.377548 Variation (%) 0.670000 E. Z Axis Scan Report No: JYTSZB-R14-2100165 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107072 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community,Xinqiao Street, Bao'an District, Shenzhen, Guangdong,People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 122 of 229 SAR Measurement at Band2_WCDMA1900 (Body, Validation Plane) Date of measurement: 19/8/2021 A. Experimental conditions. Probe SN 18/21 EPGO354 ConvF 2.14 Area Scan surf_sam_plan.txt Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm,Complete Phantom Validation plane Device Position Body Band Band2_WCDMA1900 Channels Low Signal WCDMA (Crest factor: 1.0) B. Permitivity Frequency (MHz) 1852.400024 Relative permitivity (real part) 39.498061 Conductivity (S/m) 1.397940 C. SAR Surface and Volume SURFACE SAR VOLUME SAR Maximum location: X=-10.00, Y=-12.00 ; SAR Peak: 0.67 W/kg D. SAR 1g & 10g SAR 10g (W/Kg) 0.241180 SAR 1g (W/Kg) 0.425913 Variation (%) 0.480000 E. Z Axis Scan Report No: JYTSZB-R14-2100165 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107072 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community,Xinqiao Street, Bao'an District, Shenzhen, Guangdong,People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 123 of 229 SAR Measurement at LTE band 2 (Body, Validation Plane) Date of measurement: 19/8/2021 A. Experimental conditions. Probe SN 18/21 EPGO354 ConvF 2.14 Area Scan surf_sam_plan.txt Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm,Complete Phantom Validation plane Device Position Body Band LTE band 2 Channels Middle Signal LTE (Crest factor: 1.0) B. Permitivity Frequency (MHz) 1880.000000 Relative permitivity (real part) 39.764095 onductivity (S/m) 1.411806 C. SAR Surface and Volume SURFACE SAR VOLUME SAR Maximum location: X=-16.00, Y=-28.00 ; SAR Peak: 0.82 W/kg D. SAR 1g & 10g SAR 10g (W/Kg) 0.265431 SAR 1g (W/Kg) 0.499093 Variation (%) -3.040000 E. Z Axis Scan Report No: JYTSZB-R14-2100165 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107072 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community,Xinqiao Street, Bao'an District, Shenzhen, Guangdong,People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 124 of 229 SAR Measurement at LTE band 4 (Body, Validation Plane) Date of measurement: 28/8/2021 A. Experimental conditions. Probe SN 18/21 EPGO354 ConvF 2.07 Area Scan surf_sam_plan.txt Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm,Complete Phantom Validation plane Device Position Body Band LTE band 4 Channels Middle Signal LTE (Crest factor: 1.0) B. Permitivity Frequency (MHz) 1732.500000 Relative permitivity (real part) 39.857265 Conductivity (S/m) 1.358307 C. SAR Surface and Volume SURFACE SAR VOLUME SAR Maximum location: X=-10.00, Y=-27.00 ; SAR Peak: 0.52 W/kg D. SAR 1g & 10g SAR 10g (W/Kg) 0.196364 SAR 1g (W/Kg) 0.345861 Variation (%) 1.259999 E. Z Axis Scan Report No: JYTSZB-R14-2100165 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107072 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community,Xinqiao Street, Bao'an District, Shenzhen, Guangdong,People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 125 of 229 SAR Measurement at LTE band 5 (Body, Validation Plane) Date of measurement: 13/8/2021 A. Experimental conditions. Probe SN 18/21 EPGO354 ConvF 1.68 Area Scan surf_sam_plan.txt Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm,Complete Phantom Validation plane Device Position Body Band LTE band 5 Channels High Signal LTE (Crest factor: 1.0) B. Permitivity Frequency (MHz) 844.000000 Relative permitivity (real part) 41.178195 Conductivity (S/m) 0.915384 C. SAR Surface and Volume SURFACE SAR VOLUME SAR Maximum location: X=1.00, Y=-5.00 ; SAR Peak: 0.26 W/kg D. SAR 1g & 10g SAR 10g (W/Kg) 0.101523 SAR 1g (W/Kg) 0.169037 Variation (%) 1.920000 E. Z Axis Scan Report No: JYTSZB-R14-2100165 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107072 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community,Xinqiao Street, Bao'an District, Shenzhen, Guangdong,People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 126 of 229 SAR Measurement at LTE band 12 (Body, Validation Plane) Date of measurement: 14/8/2021 A. Experimental conditions. Probe SN 18/21 EPGO354 ConvF 1.73 Area Scan surf_sam_plan.txt Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm,Complete Phantom Validation plane Device Position Body Band LTE band 12 Channels Middle Signal LTE (Crest factor: 1.0) B. Permitivity Frequency (MHz) 707.500000 Relative permitivity (real part) 41.708916 Conductivity (S/m) 0.858156 C. SAR Surface and Volume SURFACE SAR VOLUME SAR Maximum location: X=-6.0…

Text truncated - open the document above for the full version.

RF Exposure Info

JianYan Testing Group Shenzhen Co., Ltd. Report No: JYTSZB-R14-2100165 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107072 Page 1 of 6 EUT Photos (Model: S6701L) JianYan Testing Group Shenzhen Co., Ltd. Report No: JYTSZB-R14-2100165 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107072 Page 2 of 6 EUT Antenna Locations JianYan Testing Group Shenzhen Co., Ltd. Report No: JYTSZB-R14-2100165 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107072 Page 3 of 6 JianYan Testing Group Shenzhen Co., Ltd. Report No: JYTSZB-R14-2100165 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107072 Page 4 of 6 JianYan Testing Group Shenzhen Co., Ltd. Report No: JYTSZB-R14-2100165 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107072 Page 5 of 6 SAR Test Setup Photos Head Right Cheek Right Tilted Left Cheek Left Tilted Body Front side (10mm) Back side(10mm) JianYan Testing Group Shenzhen Co., Ltd. Report No: JYTSZB-R14-2100165 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107072 Page 6 of 6 Left side(10mm) Right side(10mm) Top side(10mm) Bottom side(10mm)

Test Report

JianYan Testing Group Shenzhen Co., Ltd. Report No: JYTSZB-R12-2101405 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the JYT product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC REPORT (UNII) Applicant: Sun Cupid Technology (HK) Ltd. Address of Applicant: 16/F, CEO Tower, 77 Wing Hong Street, Cheung Sha Wan, Kowloon, Hong Kong. Equipment Under Test (EUT) Product Name: LTE Smart Phone Model No.: S6701L, B15 Trade mark: NUU FCC ID: 2ADINS6701L Applicable standards: FCC CFR Title 47 Part 15 Subpart E Section 15.407 Date of sample receipt: 12 Jul., 2021 Date of Test: 13 Jul., to 30 Jul., 2021 Date of report issued: 03 Sep., 2021 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. Report No: JYTSZB-R12-2101405 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107071 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 47 2 Version Version No. Date Description 00 16 Aug., 2021 Original 01 03 Sep., 2021 Update page 18~23 Tested by: Date: 03 Sep., 2021 Test Engineer Reviewed by: Date: 03 Sep., 2021 Project Engineer Report No: JYTSZB-R12-2101405 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2107071 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 47 3 Contents Page 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 TEST SUMMARY .................................................................................................................................................. 4 5 GENERAL INFORMATION .................................................................................................................................. 5 5.1 CLIENT INFORMATION .................................................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF E.U.T. ............................................................................................................................... 5 5.3 TEST ENVIRONMENT AND MODE .................................................................................................................................... 7 5.4 DESCRIPTION OF SUPPORT UNITS ................................................................................................................................ 7 5.5 MEASUREMENT UNCERTAINTY...................................................................................................................................... 7 5.6 ADDITIONS TO, DEVIATIONS, OR EXCLUSIONS FROM THE METHOD .............................................................................. 7 5.7 RELATED SUBMITTAL(S) / GRANT (S) ........................................................................................................................... 7 5.8 LABORATORY FACILITY ................................................................................................................................................. 8 5.9 LABORATORY LOCATION ............................................................................................................................................... 8 5.10 TEST INSTRUMENTS LIST ......................................…

Text truncated - open the document above for the full version.

Contact Information

Applicant

Danny Sit

[email protected]+852-2725 0161Fax: +852- 27250090

Test Firm

JianYan Testing Group Shenzhen Co., Ltd.Bruce Zhang

[email protected]+86 (0) 755 23118282

Technical Specifications

#	Rule Parts	Frequency Range	Power Output
2	15E	5.75 GHz - 5.83 GHz	4.89 mW

Confidentiality

Long Term

Grant Notes

Output power listed is conducted. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode, and approved for use in the handset described in this filing. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance.