2ADK3XO-8801Selfie Keychain Bluetooth Remote Shutter

2402-2480MHz Model:XO-8801 FCC ID:2ADK3XO-8801 N OTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.  Thisdevicecomplieswithpart15oftheFCCrules.Operationissubjecttothefollowingtwo conditions: (1)thisdevicemaynotcauseharmfulinterference,and (2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause undesiredoperation.  Changesormodificationstothisunitnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser'sauthoritytooperatetheequipment. The device meets RF Exposure requirements without any restriction.

XING DA INTERNATIONAL ELECTRONICS LIMITED #98 LIWU SWAN INDUSTRIAL DISTRICT, QIAO TOU TOWN,DONG GUAN, GUANG DONG,CHINA TEL:(86) 769-83454636 FAX: ሺ86ሻ 769‐83345348 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 5/20/2015 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2ADK3XO-8801 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Signature XING DA INTERNATIONAL ELECTRONICS LIMITED Contact person: Sam Shen Title: Sales

May 13, 2015 Federal Communication Commission Authorization and Evaluation Division FCC ID: 2ADK3XO-8801 Re: Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1: Block Diagram 2: Circuit Diagram 3: Parts List 4.Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rules 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, XING DA INTERNATIONAL ELECTRONICS LIMITED Contact person: Sam Shen Title: Sales

External Photos TOP VIEW OF EUT BOTTOM VIEW OF EUT FRONT VIEW OF EUT BACK VIEW OF EUT LEFT VIEW OF EUT RIGHT VIEW OF EUT

Internal Photos OPEN VIEW OF EUT INTERNAL VIEW OF EUT-1 INTERNAL VIEW OF EUT-2 INTERNAL VIEW OF EUT-3 Antenna

XING DA INTERNATIONAL ELECTRONICS LIMITED #98 LIWU SWAN INDUSTRIAL DISTRICT, QIAO TOU TOWN,DONG GUAN, GUANG DONG,CHINA TEL:(86) 769-83454636 FAX: ሺ86ሻ 769‐83345348 Declaration concerning Antenna Specification It is hereby declared that the product Model No.: XO-8801 FCC ID: 2ADK3XO-8801 fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for Internal antenna type described below: Model No. of antenna: N/A Type of antenna: PCB Antenna Gain of the antenna: 0 dBi Frequency range: 2402-2480 MHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: XING DA INTERNATIONAL ELECTRONICS LIMITED Address: #98 LiWu Swan Industrial District,Qiao Tou Town,Dong Guan, City: Guang Dong ZIP / Postal code: N/A Country: China Place: Shenzhen Date: May14，2015 Signature:

RF Exposure evaluation Product Description:Selfie Keychain Bluetooth Remote Shutte Model Number: XO-8801 FCC ID: 2ADK3XO-8801 According to 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation According to the follow transmitter output power（P t ）formula： P t =（E x d） 2 /（30 x g t ） P t =transmitter output power in watts g t =numeric gain of the transmitting antenna (unitess) E=electric field strength in V/m d=measurement distance in meters (m) According to the above test data, Emax=96.55dBuv/m=0.067V/m,d=3m,g t =1 P t =（E x d） 2 /（30 x g t ）=(0.067x3) 2 /(30x1)=0.001347W=1.35mW The result is rounded to one decimal place for comparison Worse case is as below: [2402MHz -1.4mW output power] (1.4mW /5mm) .[√2.402(GHz)]= 0.43<3.0 for 1-g SAR Then SAR evaluation is not required NOTE: For the maximum power, you can refer FCC test report.

Page 1 of 46 FCC Test Report Report No.: AGC04482150401FE03 FCC ID : 2ADK3XO‐8801 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Selfie Keychain Bluetooth Remote Shutter BRAND NAME : N/A MODEL NAME : XO‐8801 CLIENT : XING DA INTERNATIONAL ELECTRONICS LIMITED LTD. DATE OF ISSUE : May.06,2015 STANDARD(S) TEST PROCEDURE(S) : FCC Part 15 Rules REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC04482150401FE03 Page 2 of 46 Report Revise Record Report Version Revise Time Issued Date Valid VersionNotes V1.0 / May.06,2015Valid Original Report Report No.: AGC04482150401FE03 Page 3 of 46 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY ...................................................................................... 4 2. GENERAL INFORMATION .................................................................................................. 5 2.1. PRODUCT DESCRIPTION ........................................................................................................... 5 2.2. TABLE OF CARRIER FREQUENCYS .......................................................................................... 5 3. MEASUREMENT UNCERTAINTY........................................................................................ 6 4. DESCRIPTION OF TEST MODES ........................................................................................ 6 5. SYSTEM TEST CONFIGURATION ...................................................................................... 7 5.1. CONFIGURATION OF EUT SYSTEM .......................................................................................... 7 5.2. EQUIPMENT USED IN EUT SYSTEM ......................................................................................... 7 5.3. SUMMARY OF TEST RESULTS .................................................................................................. 7 6. TEST FACILITY .................................................................................................................... 8 7 ALL TEST EQUIPMENT LIST ............................................................................................... 8 8. RADIATED EMISSION ......................................................................................................... 9 8.1TEST LIMIT ..................................................................................................................................... 9 8.2. MEASUREMENT PROCEDURE ................................................................................................ 10 8.3. TEST SETUP .............................................................................................................................. 12 8.4. TEST RESULT(Worst modulation:GFSK) ................................................................................... 14 9. BAND EDGE EMISSION .................................................................................................... 27 9.1. MEASUREMENT PROCEDURE ................................................................................................ 27 9.2 TEST SETUP ............................................................................................................................... 27 9.3 RADIATED TEST RESULT(Worst modulation:GFSK) ................................................................. 28 10. 20DB BANDWIDTH .......................................................................................................... 32 10.1. MEASUREMENT PROCEDURE .............................................................................................. 32 10.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ..................................................... 32 10.3. LIMITS AND MEASUREMENT RESULTS ................................................................................ 32 11. FCC LINE CONDUCTED EMISSION TEST ..................................................................... 39 11.1. LIMITS OF LINE CONDUCTED EMISSION TEST ................................................................... 39 11.2. BLOCK DIAGRAM OF LINE CONDUCTED EMISSION TEST ................................................. 39 11.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST .............................. 40 11.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST ............................................. 40 11.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST ....................................................... 40 APPENDIX A: PHOTOGRAPHS OF TEST SETUP ............................................................... 41 APPENDIX B: PHOTOGRAPHS OF EUT .............................................................................. 42 Report No.: AGC04482150401FE03 Page 4 of 46 1. VERIFICATION OF CONFORMITY Applicant XING DA INTERNATIONAL ELECTRONICS LIMITED LTD. Address #98 LiWu Swan Industrial District, Qiao Tou Town, Dong Guan, Guang Dong, China Manufacturer XING DA INTERNATIONAL ELECTRONICS LIMITED LTD. Address #98 LiWu Swan Industrial District, Qiao Tou Town, Dong Guan, Guang Dong, China Product Designation Selfie Keychain Bluetooth Remote Shutter Brand Name N/A Test Model XO-8801 Date of test Apr.28,2015 to May.06,2015 Deviation None Condition of Test Sample Normal Report Template AGCRT-US-BR/RF We hereby certify that: The above equipment was tested by Compliance Certification Service(Shenzhen) Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2009) and the energy emitted by the sample EUT tested as described in this report is in compliance with radiated emission limits of FCC Rules Part 15.249. Prepared By Water Zuo May.06,2015 Checked By Forrest Lei May.06,2015 Authorized By Solger Zhang May.06,2015 Report No.: AGC04482150401FE03 Page 5 of 4…

Text truncated - open the document above for the full version.

APPENDIX IV PHOTOGRAPHS OF TEST SETUP FCC RADIATED EMISSION TEST SETUP