2ADPZ-INETX2Digital Control Panel for caravanning industry

FCB046_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: 2026-03-12 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Certification designating a U.S. agent for service of process. As required by section 2.911(d)(7), FCC ID: 2ADPZ-INETX2 We, Truma Gerätetechnik GmbH & Co. KG Wernher-von-Braun-Straße 12, 85640 Putzbrunn ; Germany FRN: 0024120107 certify that: Mark Howlett Truma Corp 2800 Harman Drive, Elkhart, 46514 Indiana,USA E-Mail: [email protected] Is our designated U.S. agent for service of process and we acknowledge: -our consent to accept service of process in the United States for matters related to the applicable equipment at the physical U.S. address and email address of the designated U.S. agent -the acceptance to maintain an U.S. agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Designated U.S. Agent Sincerely, ___ _____________ By: Frank Ibach Title: Product Compliance Officer Company: Truma Gerätetechnik GmbH & Co. KG Telephone: +49 89 4617 2605 e- mail: [email protected] We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address stated above. ___ _______________ By: Mark Howlett Title: President & CEO Company: Truma Corp Telephone: 1-855-558-7862 e-mail:[email protected]

FCB045_01 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: 2026-03-12 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Certifications concerning “covered” equipment. Section 2.911(d)(5)(i)- (ii) FCC ID: 2ADPZ-INETX2 We, Truma Gerätetechnik GmbH & Co. KG, Wernher-von-Braun-Straße 12, 85640 Putzbrunn, Germany; certify that: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Also, we certify that the equipment for which authorization is sought does not contain or includes equipment with integrated cybersecurity and anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees. Sincerely, __________________________ By: Frank Ibach Title: Product Compliance Officer Company: Truma Gerätetechnik GmbH & Co. KG Telephone: +49 89 4617 2605 e- mail: [email protected]

ruma Prod uct Declaration Letter To whom it may concern, Product(s): iNet X Panel 2 and iNet X Pro Panel 2 Type ref. number(s): 47000-00264 and 47000-00265 We, Truma Gerätetechnik GmbH & Co. KG located in Wernher-von-Braun-Straße 12, 85640 Putzbrunn, Germany, declare that the above electrical products, are identical in all respects (e.9. design, construction, proportions, components...) except for the display and logo. Signed on behalf of Truma Gerätetechnik GmbH & Co. KG by Name: Jan-Peter Albers Position: Director Business Center Vehicle Systems E-mail. albers ma.co Date: 14.04.2025 Place: Putzbrunn

FCB012_05 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: 2026-03-12 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: Confidentiality request for FCC ID: 2ADPZ-INETX2 To whom it may concern: Pursuant to §0.457(d)(1)(ii) and §0.459 of the Commission’s Rules (47 C.F.R.) and §552 (b)(4) of the Freedom of Information Act, Truma Gerätetechnik GmbH & Co. KG hereby requests that a part of the subject FCC application be held confidential to avoid release of sensitive information of the product to the public. For the product stated above, we request that the following information be withheld from public disclose: Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Internal Photos Short Term Permanent Operation Description Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term User’s Manual Short Term Permanent SDR software and security information Permanent Confidentiality: The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to us and provide unjustified benefits to our competitors. Short-Term Confidentiality: We hereby request short-term confidentiality for the product stated above to avoid premature release of sensitive information prior to marketing or release of the product to the public. Release date of short-term confidentiality is: 45 days from grant date marked 90 days from grant date marked 135 days from grant date marked 180 days from grant date marked Specific date: We are also aware that we are responsible to notify DEKRA in the event information regarding the product or the product is made available to the public. DEKRA will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, __________________________ By: Frank Ibach Title: Product Compliance Officer Company: Truma Gerätetechnik GmbH & Co. KG Telephone: +49 89 4617 2605 e- mail: [email protected]

FCB034_00 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: 2026-03-12 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: sDoC declaration letter for equipment with FCC ID: 2ADPZ-INETX2 Pursuant to §15.101 of the Commission’s Rules (47 C.F.R.), Truma Gerätetechnik GmbH & Co. KG hereby declare that the device above mentioned is classified under the following equipment class/classes: JAB Part 15 Class B Digital Device JAD Part 15 Class A Digital Device JAV Other Non-Digital SDoC Devices JBP Part 15 Class B Computing Device/Personal Computer JBC Part 15 Class B Computing Device/Personal Computer CXX Communications Rcvr for use w/ licensed Tx and CBs CRR Superregenerative Receiver CYY Communications Receiver used w/Pt 15 Transmitter HID Part 15 TV Interface Device And will follow the Authorization procedure Supplier’s Declaration of Conformity prior to the initiation of marketing. Sincerely, __________________________ By: Frank Ibach Title: Product Compliance Officer Company: Truma Gerätetechnik GmbH & Co. KG Telephone: +49 89 4617 2605 e- mail: [email protected]

FCB011_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: 2026-03-12 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: Agent letter for FCC ID: 2ADPZ-INETX2 We, Truma Gerätetechnik GmbH & Co. KG Wernher-von-Braun-Straße 12, 85640 Putzbrunn ; Germany hereby authorize DEKRA Testing and Certification, S.A.U, Severo Ochoa, 2, 29590, Malaga, Spain Ms. Inmaculada Quesada Rodríguez, e- mail: [email protected] Phone: +34 952 619 100 to act as our agent in the preparation of this application for equipment certification, including the signing of all documents relating to these matters. The present authorization considers the development of documents on behalf of the client, written under his own letterhead and related to the necessary information to be provided on his behalf to complete the certification process. We also hereby certify that neither we nor any party to this application are subject to a denial of U.S. Federal benefits, which include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by DEKRA Testing and Certification, S.A.U., still resides with us. This agreement expires one year from the current date. Sincerely, __________________________ By: Frank Ibach Title: Product Compliance Officer Company: Truma Gerätetechnik GmbH & Co. KG Telephone: +49 89 4617 2605 e- mail: [email protected]

Truma - iNet X Panel 2 Label design Label location Truma - iNet X Pro Panel 2 Label design Label location

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 80801RAN.002 2025-06-17 Test report No: NIE: 80801RAN.002 Assessment report RF EXPOSURE REPORT ACCORDING TO FCC 47 CFR Part 2.1091; FCC 47 CFR Part 1.1307 FCC 47 CFR Part 1.1310 (*) Identification of item under evaluation Digital Control Panel for caravanning industry (*) Trademark Truma (*) Model and /or type reference iNet X Pro Panel 2 (47000-00265) (*) Other identification of the product FCC ID : 2ADPZ-INETXP2 IC ID : 12552A-INETXP2 HW version : EWY-221-01 (AXTR0004.01 Truma_iNetXPnl-1v2) SW Version : 24125.1.0.22 (*) Features Bluetooth LE (*) Manufacturer Truma Gerätetechnik GmbH & Co. KG Wernher-von-Braun-Straße 12, 85640 Putzbrunn ; Germany Test method requested, standard FCC 47 CFR Part 2.1091 Radiofrequency radiation exposure evaluation: mobile devices. FCC 47 CFR Part 1.1307: Actions that may have a significant environmental effect, for which Environmental Assessments (EAs) must be prepared. FCC 47 CFR Part 1.1310: Radiofrequency radiation exposure limits. Summary IN COMPLIANCE Approved by (name / position & signature) Manuel García Antennas Lab Technical Responsible Date of issue 2025-06-17 Report template No FAN36_03 (*) “Data provided by the client” DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 80801RAN.002 Page 2 of 12 2025-06-17 Index Competences and guarantees .................................................................................................... 3 General conditions ...................................................................................................................... 3 Data provided by the client .......................................................................................................... 3 Identification of the client............................................................................................................. 5 Document history ........................................................................................................................ 5 Appendix A: FCC RF Exposure assessment result ..................................................................... 6 General description of the device under evaluation ................................................................ 7 Evaluation Results .................................................................................................................. 8 Appendix B: FCC RF Exposure information ................................................................................ 9 RF Exposure determination of exemption ............................................................................. 10 RF Exposure evaluation ....................................................................................................... 12 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 80801RAN.002 Page 3 of 12 2025-06-17 Competences and guarantees In order to assure the traceability to other national and international laboratories, DEKRA Testing and Certification, S.A.U. has a calibration and maintenance program for its measurement equipment. DEKRA Testing and Certification, S.A.U. guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at DEKRA Testing and Certification, S.A.U. at the time of performance of the test. DEKRA Testing and Certification, S.A.U. is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Assessment Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA Testing and Certification, S.A.U. General conditions 1. This report is only referred to the item that has undergone the assessment. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA Testing and Certification, S.A.U. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA Testing and Certification, S.A.U. and the Accreditation Bodies Data provided by the client The following data has been provided by the client: 1. Information relating to the description of the sample ("Identification of the item under evaluation", "Trademark", "Model and/or type reference", “General description of the device”, “Other identification of the product”). 2. Maximum output power, maximum antenna gain and use distance information. 3. The device under evaluation consists of a standard 4.3 '' touchscreen panel of the Truma iNet X System to control devices in a recreation vehicle. 4. Derived model not evaluated. These models have been declared by the supplier of the sample as being the same as the model under evaluation. DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 80801RAN.002 Page 4 of 12 2025-06-17 DEKRA Testing and Certification S.A.U. declines any responsibility with respect to the information provided by the client and that may affect the validity of results. DEKRA Testing…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: 81801RRF.003A2 2026-09-03 ISED CABid: ES1909 Lab. Company Number: 4621A Test Report No: 81801RRF.003A2 Test Report USA FCC Part 15.247, 15.209 CANADA RSS-247, RSS-Gen (*) Identification of item tested Digital Control Panel for caravanning industry (*) Trademark Truma (*) Model and /or type reference iNet X Panel 2 (47000-00264) Other identification of the product FCC ID: 2ADPZ-INETX2 IC: 12552A-INETX2 (*) Features Bluetooth LE HW version: EWY-221-01 (AXTR0004.01 Truma_iNetXPnl-1v2) SW version: 24125.1.0.22 Applicant Truma Gerätetechnik GmbH & Co. KG Wernher-von-Braun-Straße 12, 85640 Putzbrunn ; Germany Test method requested, standard USA FCC Part 15.247 (10-1-25 Edition): Operation within the bands 902 - 928 MHz, 2400 -2483.5 MHz, and 5725 - 5850 MHz. USA FCC Part 15.209 (10-1-25 Edition): Radiated emission limits; general requirements. CANADA RSS-247 Issue 4 (July 2025). CANADA RSS-Gen Issue 5 amendment 2 (February 2021). Guidance for Performing Compliance Measurements on Digital Transmission System, Frequency Hopping Spread Spectrum System, and Hybrid Systems Devices Operating Under Section 15.247 of the FCC Rules. 558074 D01 Meas Guidance v05r02 dated April 2, 2019. ANSI C63.10-2020 / Cor.1-2023 / C63.10a-2024 / Errata to C63.10a-2024: American National Standard for Testing Unlicensed Wireless Devices. Summary IN COMPLIANCE Approved by (name / position & signature) José Manuel Gómez Galván EMC Consumer & RF Lab. Manager Date of issue 2026-09-03 Report template No FDT08_25 (*) “Data provided by the client” DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: 81801RRF.003A2 Page 2 of 85 2026-09-03 Index INDEX ........................................................................................................................................................................... 2 ACRONYMS ................................................................................................................................................................. 3 COMPETENCES AND GUARANTEES ....................................................................................................................... 3 GENERAL CONDITIONS ............................................................................................................................................. 4 UNCERTAINTY ............................................................................................................................................................ 4 DATA PROVIDED BY THE CLIENT ............................................................................................................................ 4 USAGE OF SAMPLES ................................................................................................................................................. 5 TEST SAMPLE DESCRIPTION ................................................................................................................................... 5 IDENTIFICATION OF THE CLIENT ............................................................................................................................. 5 TESTING PERIOD AND PLACE .................................................................................................................................. 6 DOCUMENT HISTORY ................................................................................................................................................ 7 ENVIRONMENTAL CONDITIONS ............................................................................................................................... 7 REMARKS AND COMMENTS ..................................................................................................................................... 8 TESTING VERDICTS ................................................................................................................................................... 9 SUMMARY .................................................................................................................................................................... 9 APPENDIX A: TEST RESULTS. BLUETOOTH LOW ENERGY (2M, 1M)................................................................ 10 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: 81801RRF.003A2 Page 3 of 85 2026-09-03 Acronyms Acronym ID Acronym Description E.I.R.P. Detector Detector used Ebw Emission Bandwidth Equipment Equipment Type Freq Frequency Freq Rng Frequency Range Inband Peak Lvl Inband Peak Level Lvl Level MP Measurement Point Mod Modulation Occ Ch BW Occupied Channel Bandwidth Operation Band Operation Band PSD Power Spectral Density Peak Power Maximum Peak Conducted Output Power Pol Polarization Port Active Port RU Resource Unit Unwanted Freq Unwanted Emissions Frequency Unwanted Lvl Unwanted Emissions Level Competences and guarantees DEKRA Testing and Certification S.A.U. is a testing laboratory accredited by the National Accreditation Body (ENAC -Entidad Nacional de Acreditación), to perform the tests indicated in the Certificate No. 51/LE 147. DEKRA Testing and Certification S.A.U. is an FCC-recognized accredited testing laboratory with appropriate scope of accreditation that covers the performed tests in this report. DEKRA Testing and Certification S.A.U. is an ISED-recognized accredited testing laboratory, CABid: ES1909, Company Number: 4621A, with the appropriate scope of accreditation that covers the performed tests in this report. In order to assure the traceability to other national and international laboratories, DEKRA Testing and Certification S.A.U. has a calibration and maintenance program for its …

Text truncated - open the document above for the full version.

Application Report 2.4-GHz Inverted F Antenna ABSTRACT This document describes a printed-circuit board (PCB) antenna design that can be used with all 2.4-GHz transceivers and transmitters from Texas Instruments ™ . The maximum gain when used on the reference board is measured to be +3.3 dBi, and the overall size requirements for this antenna are 25.7 × 7.5 mm (not including ground plane). Table of Contents 1 Description of the antenna Design........................................................................................................................................2 2 Measurement Results.............................................................................................................................................................3 2.1 Radiation Pattern...............................................................................................................................................................3 2.2 Reflection.........................................................................................................................................................................10 2.3 Bandwidth.........................................................................................................................................................................11 3 Summary................................................................................................................................................................................11 4 References.............................................................................................................................................................................11 5 Revision History...................................................................................................................................................................12 Trademarks Texas Instruments ™ is a trademark of Texas Instruments. All trademarks are the property of their respective owners. www.ti.comTable of Contents SWRU120D – APRIL 2007 – REVISED JANUARY 2019 Submit Document Feedback 2.4-GHz Inverted F Antenna1 Copyright © 2021 Texas Instruments Incorporated 1 Description of the antenna Design It is important to make an exact copy of the antenna dimensions to obtain optimum performance. The easiest approach to implement the antenna in a PCB CAD tool is to import the antenna layout from a gerber file or a DXF file. Such files are included in CC2430DB reference design [1]. The gerber file is called Inverted_F_Antenna.spl and the DXF file is called Inverted_F_Antenna.dxf. If the antenna is implemented on a PCB that is wider than the antenna, avoid placing components or having a ground plane close to the end points of the antenna. If the CAD tool being used does not support importing gerber or DXF files, see Figure 1-1 and Table 1-1. The antenna impedance is tuned to 50 ohm on the reference board. The impedance will however be affected by different size and shape of the ground plane, objects in the antenna nearfield such as mechanical assemblies (housing, batteries, etc.), PCB thickness, PCB material and so on. It is therefore recommended to add a pi-network close to the antenna feedpoint for impedance matching. The results presented in this document are based on an antenna implemented on a PCB with a 1-mm thickness using standard FR-4 material. Figure 1-1. IFA Dimensions Table 1-1. IFA Dimensions H15.70 mmW20.46 mm H20.74 mmL125.58 mm H31.29 mmL216.40 mm H42.21 mmL32.18 mm H50.66 mmL44.80 mm H61.21 mmL51.00 mm H70.80 mmL61.00 mm H81.80 mmL73.20 mm H90.61 mmL80.45 mm W11.21 mm Description of the antenna Designwww.ti.com 22.4-GHz Inverted F AntennaSWRU120D – APRIL 2007 – REVISED JANUARY 2019 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated 2 Measurement Results All of the results presented in this section are based on measurements performed with the CC2430DB [1] evaluation board. 2.1 Radiation Pattern Figure 2-1 shows how to relate all of the radiation patterns to the orientation of the antenna. The radiation patterns were measured with the CC2430 device programmed to 0-dBm output power. Figure 2-1. Relating Antenna to Radiation Patterns www.ti.comMeasurement Results SWRU120D – APRIL 2007 – REVISED JANUARY 2019 Submit Document Feedback 2.4-GHz Inverted F Antenna3 Copyright © 2021 Texas Instruments Incorporated Figure 2-2 shows the XY plane vertical polarization. Figure 2-2. XY Plane–Vertical Polarization Measurement Resultswww.ti.com 42.4-GHz Inverted F AntennaSWRU120D – APRIL 2007 – REVISED JANUARY 2019 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated Figure 2-3 shows the XY plane horizontal polarization. Figure 2-3. XY Plane–Horizontal Polarization www.ti.comMeasurement Results SWRU120D – APRIL 2007 – REVISED JANUARY 2019 Submit Document Feedback 2.4-GHz Inverted F Antenna5 Copyright © 2021 Texas Instruments Incorporated Figure 2-4 shows the XZ plane vertical polarization. Figure 2-4. XZ Plane–Vertical Polarization Measurement Resultswww.ti.com 62.4-GHz Inverted F AntennaSWRU120D – APRIL 2007 – REVISED JANUARY 2019 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated Figure 2-5 shows the XZ plane horizontal polarization. Figure 2-5. XZ Plane–Horizontal Polarization www.ti.comMeasurement Results SWRU120D – APRIL 2007 – REVISED JANUARY 2019 Submit Document Feedback 2.4-GHz Inverted F Antenna7 Copyright © 2021 Texas Instruments Incorporated Figure 2-6 shows the YZ plane vertical polarization. Figure 2-6. YZ Plane–Vertical Polarization Measurement Resultswww.ti.com 82.4-GHz Inverted F AntennaSWRU120D – APRIL 2007 – REVISED JANUARY 2019 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated Figure 2-7 shows the YZ plane horizontal polarization. Figure 2-7. YZ Plane–Horizontal Polarization www.ti.comMeasurement Results SWRU120D – APRIL 2007 – REVISED JANUARY 2019 Submit Document Feedback 2.4-GHz Inverted F Antenna9 Copyright © 202…

Text truncated - open the document above for the full version.