2ADQTV1ELTemperatue And Humidity Sensor With BLE Module

fp floor protector GmbH Waldgasse 2 A-2700 Wr. Neustadt Certification information a) User Information gem. FCC 15.21 enthalten: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. b) Part 15 Statement gem. FCC 15.19 falls das Statement nicht b) Part 15 Statement gem. FCC 15.19 falls das Statement nicht auf dem Gerät steht, weil dieses kleiner als eine Handfläche ist) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. c) Statement gem.RSS GEN Issue 5:c) Statement gem.RSS GEN Issue 5: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference (2) This device must accept any interference, including interference that may cause undesired operation of the device.that may cause undesired operation of the device. Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes:(1) Cet appareil ne doit pas causer d'interférences(2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de l'appareil.un fonctionnement indésirable de l'appareil. • Always store unassembled easyloggers in the original packaging in a frost-proof and dry place • Protect from direct sunlight • Do not built in damaged devices • Do not open or modify the device • Never keep next to magnetic fields Hints Read out the easylogger is possible with an own APP, called “easylogger”, which is available for Android and Apple-Smartphones in the respective store (Apple-AppStore or Android-PlayStore). Instructions and further information can be found in the App or on our website (www.floorprotector.at) using the following QR code: App The easylogger is a temperature (°C) and humidity measuring device (%RH), on which long-term data records of these measured values are saved. The device is positioned on the screed surface. With the easylogger, the room climate can be measured directly on the screed-surface during the screed drying and the associated diagram can be displayed. The data can be read out contactless via radio connection with The data can be read out contactless via radio connection with synchronization using a mobile phone or a PC. The device can be read out up to five times. Product description Drill, with a 35mm drill, an approximately 18mm deep hole into the subsurface and glue the easylogger into the borehole with filler or floor adhesive (see picture). In order to find the device more easily afterwards, the enclosed flag can be used. After placing the easylogger on the surface of the screed, insert the enclosed flag into the smaller hole on the top. Version 2 - belated gluing After applying the screed, press the easylogger with your fingers into the still soft/liquid screed until the easylogger is just below the top edge of the screed (see picture). Version 1 - straight into the fresh screed Installation Q u i ck guide

easyloggerApp Version 3.8.1 foriOS and Android Requirements of the easyloggerapp for Android: Bluetooth 4 or later and an Android version 4.2 or later! Requirements of the easyloggerApp for Apple iOS: Bluetooth 4 or later and an iOS version of 9.0 or later! Inhaltsverzeichnis 1. General information on reading out an easylogger.............. 2. Login screen........................................................................... 3. Creation of a Floorprotectoruser account.............................. 4. Read out an easylogger....................................................... 5. Main screen............................................................................. 6. App settings........................................................................... 7. Help section........................................................................... 8. Resetpassword....................................................................... 9. General Information S. 3 S. 4 S. 5 -8 S. 9 S. 10 -11 S. 12 S. 13 S. 14 -15 2 1. General informationaboutsynchronization What is a readout? A readout is the retrieval of the measurement data recorded by the easyloggerusing the mobile app or the desktop application. When can I read out? To enable a successful readout, Bluetooth must be activated on your smartphone / tablet. Furthermore, the easyloggermust be "woken up" with a magnet (minimum holding power 1kg) and must be within range. To ensure a lifetime of up to 6 years, an easylogger"sleeps" until it is woken up. 3 2. Login screen 4 Before logging in, you must first enter your user name and password. If you do not have an account yet, you can create one by clicking the "Create Account" button. (See page 5). If you have forgotten your password, click on the "Forgot password" button to reset your password. (See page 14). 3. Creationof a Floorprotectoruser account After you have clicked on "Create account", you will be redirected to this screen. 5 Here you can see our general terms and conditions of sale. By clicking on the "Accept" button you accept our general terms and conditions and will be forwarded. This button changes the language of the GTC's. 3. Creationof a Floorprotectoruser account (Continuation) In this screen you must enter your account details. After entering your data, click on "Save" to proceed to the next step. 6 Now you see the privacy policy. After you have accepted our privacy policy, you will be sent an e-mail. In this e-mail you will find a link to confirm your e-mail address. 3. Creation of a Floorprotectoruser account (Continuation) 7 The privacy policy is also available in German and English. You hereby accept our privacy policy and complete the creation of your account. If you do not agree with the privacy policy, click on "Delete Account" to cancel the creation of your account. After creating your account you will be forwarded to the main screen and can now read out your first easylogger. 3. Creation of a Floorprotectoruser account (Continuation) 8 By clicking on this symbol a easyloggercan be read out. See next chapter. Help section P. 13 App settings P. 12 4. Read out an easylogger By clicking on "Readout" you can retrieve the measured data of an easylogger. This message will then appear, explaining how to wake up the easylogger. By clicking on "OK" you start the readout finally. Now the search for an easyloggerhas started, here you can see how long the search for an easyloggertakes. If the easyloggerhas been found, the measured data will be read out, if this is completed, you can see the measured data on the main screen. 5. Main screen Temperature and humidity of the last readout. App settings p. 12 10 Read out an easylogger p. 9 Time of the last Synchronization Numberofremaining Readings Help section p. 13 Currenteasylogger Edit easylogger You can switch between displaying temperature or humidity by clicking on one of the two icons: and . If you touch the line at a specific point, detailed information about the measurement data at that point is displayed. 5. Main screen (Continuation) 11 If you click on the current easylogger, a list of all the easyloggersyou have already read out will appear. By clicking on an easylogger, it will be selected. With these buttons you can edit the easyloggeror delete it from your list. After you have clicked on the "Settings" button, you will be directed to the settings of the app. 14. App settings Here you can select the languages. Here you can change the temperature unit. If you click on this button, you can change your user account settings. Here you will be logged out and automatically directed to the login screen. This button is only important in the IOS version of the app. If there are problems connecting to a specific device, you can reset the list of paired Bluetooth devices. This often helps to establish the desired connection. Here you can change the units of measurement. Here you get back to the main screen 12. Help section 13 Opens the message system(see below), which allows you to leave a message for our customer support. Shows answers to the most frequently asked questions by our users. Here you will find various instructional videos Enter your name, email address and the subject of your message Write yourmessage Press the "Send message" button Our support team will contact you in the following days. 16. Resetpassword After you have clicked on "Forgot password", this window appears. Enter the e-mail address of your account here and click "Send email". If you have entered the correct e-mail address, this message appears. 14 16. Resetpassword(Continuation) After you have successfully entered your e-mail address, an e-mail will be sent to you. Click on the link in the email to reset your password. Enter your new password here and click on "Change password". After you have clicked on the link, you will be directed to this website After successfully changing your password, you can log back into our app with your new password. 15 16…

Text truncated - open the document above for the full version.

053019 – 12 CSA Internal | 3rd Party Authority to Act as Agent Date: December 21, 2020 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: CSA Group Bayern GmbH, Ms. Christa Jaeger is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, This authorization is valid until further written notice from fp floor protector GmbH. By: Alfred Puchegger Title: CEO On behalf of: fp floor protector GmbH Telephone: +43 277429701 THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD 053019 – 12 CSA Internal | 3rd Party

The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permissi on of the test labor atory . CSA Group Bayern GmbH File No. T46146-00-01FX to T46146-00-04FX, page 1 of 7 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 5.0, 2020-02-11 CSA Confidential Attachment A Type / Model Name : EasyLogger Product Description : Temperature and Humidity Sensor with BLE Module Applicant : fp floor protector GmbH Address : Waldgasse 2 2700 WIENER NEUSTADT, AUSTRIA Manufacturer : fp floor protector GmbH Address : Waldgasse 2 2700 WIENER NEUSTADT, AUSTRIA according to Test Report No. : T46146-00-01FX to T46146-00-04FX 28. April 2020 ______________________________________________________________________________________________ Date of issue The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permissi on of the test labor atory . CSA Group Bayern GmbH File No. T46146-00-01FX to T46146-00-04FX, page 2 of 7 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 5.0, 2020-02-11 CSA Confidential Contents 1 P h o t o d o c u m e n t a t i o n o f t h e E U T 3 1.1 The EUT is applied in the following variants: 3 1.2 External views: 3 1.3 Internal views: 5 1.4 Chip and Antenna 7 The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permissi on of the test labor atory . CSA Group Bayern GmbH File No. T46146-00-01FX to T46146-00-04FX, page 3 of 7 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 5.0, 2020-02-11 CSA Confidential 1 P h o t o d o c u m e n t a t i o n o f t h e E U T 1.1 The EUT is applied in the following variants: There are no variants. 1.2 External views: The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permissi on of the test labor atory . CSA Group Bayern GmbH File No. T46146-00-01FX to T46146-00-04FX, page 4 of 7 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 5.0, 2020-02-11 CSA Confidential EUT for radiated tests

The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permissi on of the test labor atory . CSA Group Bayern GmbH File No. T46146-00-01FX to T46146-00-04FX, page 1 of 7 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 5.0, 2020-02-11 CSA Confidential Attachment A Type / Model Name : EasyLogger Product Description : Temperature and Humidity Sensor with BLE Module Applicant : fp floor protector GmbH Address : Waldgasse 2 2700 WIENER NEUSTADT, AUSTRIA Manufacturer : fp floor protector GmbH Address : Waldgasse 2 2700 WIENER NEUSTADT, AUSTRIA according to Test Report No. : T46146-00-01FX to T46146-00-04FX 28. April 2020 ______________________________________________________________________________________________ Date of issue The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permissi on of the test labor atory . CSA Group Bayern GmbH File No. T46146-00-01FX to T46146-00-04FX, page 5 of 7 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 5.0, 2020-02-11 CSA Confidential 1.3 Internal views: Radiated sample The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permissi on of the test labor atory . CSA Group Bayern GmbH File No. T46146-00-01FX to T46146-00-04FX, page 6 of 7 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 5.0, 2020-02-11 CSA Confidential The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permissi on of the test labor atory . CSA Group Bayern GmbH File No. T46146-00-01FX to T46146-00-04FX, page 7 of 7 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 5.0, 2020-02-11 CSA Confidential EUT for conducted measurments 1.4 Chip and Antenna - End of attachment_A -

The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permissi on of the test laboratory . CSA Group Bayern GmbH File No. T46146-00-04FX, page 1 of 10 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 6.0, 2020-01-22 CSA Confidential EMI − T E S T R E P O R T - Human Exposure - Type / Model Name : EasyLogger Product Description : Temperature and Humidity Sensor with BLE module Applicant : fp floor protector GmbH Address : Waldgasse 2 2700 WIENER NEUSTADT, AUSTRIA Manufacturer : fp floor protector GmbH Address : Waldgasse 2 2700 WIENER NEUSTADT, AUSTRIA Test Result according to the standards listed in clause 1 test standards: POSITIVE Test Report No. : T46146-00-04FX 28. April 2020 ______________________________________________________________________________________________ Date of issue The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permissi on of the test laboratory . FCC ID: 2ADQTV1EL IC: 12568A-V1EL CSA Group Bayern GmbH File No. T46146-00-04FX, page 2 of 10 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 6.0, 2020-01-22 CSA Confidential Contents 1 T E S T S T A N D A R D S 3 2 E Q U I P M E N T U N D E R T E S T 4 2.1 Information provided by the Client 4 2.2 Sampling 4 2.3 Photo documentation of the EUT – See ATTACHMENT A 4 2.4 Equipment type, category 4 2.5 Short description of the equipment under test (EUT) 4 2.6 Variants of the EUT 4 2.7 Operation frequency and channel plan 5 2.8 Transmit operating modes 5 2.9 Antennas 5 2.10 Power supply system utilised 5 3 T E S T R E S U L T S U M M A R Y 6 3.1 Final assessment 6 4 T E S T E N V I R O N M E N T 7 4.1 Address of the test laboratory 7 4.2 Environmental conditions 7 4.3 Statement of the measurement uncertainty 7 5 H U M A N E X P O S U R E 8 5.1 Maximum permissible exposure (MPE) 8 5.2 Co-location and Co-transmission 10 ATTACHMENT A as separate supplement The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permissi on of the test laboratory . FCC ID: 2ADQTV1EL IC: 12568A-V1EL CSA Group Bayern GmbH File No. T46146-00-04FX, page 3 of 10 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 6.0, 2020-01-22 CSA Confidential 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules and Regulations Part 1, Subpart I - Procedures Implementing the National Environmental Policy Act of 1969 Part 1, Subpart I, Section 1.1310 Radiofrequency radiation exposure limits Part 1, Subpart 2, Section 2.1091 Radiofrequency radiation exposure evaluation: mobile devices. Part 1, Subpart 2, Section 2.1093 Radiofrequency radiation exposure evaluation: portable devices. KDB 447498 D01 v06 RF Exposure procedures and equipment authorisation policies for mobile and portable devices, October 23, 2015. KDB 865664 D01 v01r04 SAR Measurement Requirements for 100 MHz to 6 GHz, August 7, 2015. ANSI C95.1: 2005 IEEE Standard for Safety Levels with respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz ETSI TR 100 028 V1.3.1: 2001-03, Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Uncertainties in the Measurement of Mobile Radio Equipment Characteristics—Part 1 and Part 2 The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permissi on of the test laboratory . FCC ID: 2ADQTV1EL IC: 12568A-V1EL CSA Group Bayern GmbH File No. T46146-00-04FX, page 4 of 10 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 6.0, 2020-01-22 CSA Confidential 2 E Q U I P M E N T U N D E R T E S T 2.1 Information provided by the Client Please note, we do not take any responsibility for information provided by the client or his representative which may have an influence on the validity of the test results. 2.2 Sampling The customer is responsible for the choice of sample. Sample configuration, start-up and operation is carried out by the customer or according his/her instructions. 2.3 Photo documentation of the EUT – See ATTACHMENT A 2.4 Equipment type, category BLE device, mobile equipment. 2.5 Short description of the equipment under test (EUT) Number of tested samples: 2 Serial number: 300268 (conducted), 300269 (radiated) Firmware version: 0120007048 EUT configuration: (The CDF filled by the applicant can be viewed at the test laboratory.) 2.6 Variants of the EUT There are no variants. The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permissi on of the test laboratory . FCC ID: 2ADQTV1EL IC: 12568A-V1EL CSA Group Bayern GmbH File No. T46146-00-04FX, page 5 of 10 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 6.0, 2020-01-22 CSA Confidential 2.7 Operation frequency and channel plan The operating frequency is 2400 MHz to 2483.5 MHz. Channel plan BT-Standard 802.15.1: Note: the marked frequencies are determined for final testing. 2.8 Transmit operating modes The EUT uses GFSK modulation and may provide following data rates: - 1000 kbps (kbps = kilobits per second) 2.9 Antennas The following antenna shall be used with the EUT: Number Characteristic Model number Plug Frequency range (GHz) Gain (dBi) Cable loss (dB) Effective gain (dBi) 1 Omni- Directional ANT3216LL00R2400A solder 2.4 5.05 0 5.05 2.10 Power supply system utilised Power supply voltage, V nom : 3 VDC (battery) Power supply voltage (alternative) : --- ChannelFrequencyChannelFrequency 372402182442 02404192444 12406202446 22408212448 32410222450 42412232452 52414242454 6…

Text truncated - open the document above for the full version.

The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permissi on of the test laboratory . CSA Group Bayern GmbH File No. T46146-00-03FX, page 1 of 50 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 6.0 2019-12-18 EMI − T E S T R E P O R T - FCC Part 15.247, RSS-247 - Type / Model Name : EasyLogger Product Description : Temperature and Humidity Sensor with BLE Module Applicant : fp floor protector GmbH Address : Waldgasse 2 2700 WIENER NEUSTADT, AUSTRIA Manufacturer : fp floor protector GmbH Address : Waldgasse 2 2700 WIENER NEUSTADT, AUSTRIA Test Result according to the standards listed in clause 1 test standards: POSITIVE Test Report No. : T46146-00-03FX 11. January 2021 ______________________________________________________________________________________________ Date of issue FCC ID: 2ADQTV1EL IC: 12568A-V1EL CSA Group Bayern GmbH File No. T46146-00-03FX, page 2 of 50 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 6.0 2019-12-18 Contents 1 T E S T S T A N D A R D S 3 2 E Q U I P M E N T U N D E R T E S T 4 2.1 Information provided by the Client 4 2.2 Sampling 4 2.3 General remarks 4 2.4 Photo documentation of the EUT – Detailed photos see ATTACHMENT A 4 2.5 Equipment type 4 2.6 Short description of the equipment under test (EUT) 4 2.7 Variants of the EUT 4 2.8 Operation frequency and channel plan 5 2.9 Transmit operating modes 5 2.10 Antennas 5 2.11 Power supply system utilised 5 2.12 Peripheral devices and interface cables 6 2.13 Determination of worst case conditions for final measurement 6 3 T E S T R E S U L T S U M M A R Y 7 3.1 Final assessment 7 4 T E S T E N V I R O N M E N T 8 4.1 Address of the test laboratory 8 4.2 Environmental conditions 8 4.3 Statement of the measurement uncertainty 8 4.1 Conformity Decision Rule 9 4.2 Measurement protocol for FCC and ISED 9 5 T E S T C O N D I T I O N S A N D R E S U L T S 11 5.1 EBW and OBW 11 5.2 Maximum peak radiated output power 20 5.3 Power spectral density 23 5.4 Radiated emissions in restricted bands 26 5.5 Spurious emissions radiated 42 5.6 Antenna application 46 6 U S E D T E S T E Q U I P M E N T A N D A C C E S S O R I E S 50 FCC ID: 2ADQTV1EL IC: 12568A-V1EL CSA Group Bayern GmbH File No. T46146-00-03FX, page 3 of 50 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 6.0 2019-12-18 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules and Regulations Part 15, Subpart A - General (September 2019) Part 15, Subpart A, Section 15.31 Measurement standards Part 15, Subpart A, Section 15.33 Frequency range of radiated measurements Part 15, Subpart A, Section 15.35 Measurement detector functions and bandwidths FCC Rules and Regulations Part 15, Subpart C - Intentional Radiators (September 2019) Part 15, Subpart C, Section 15.203 Antenna requirement Part 15, Subpart C, Section 15.204 External radio frequency power amplifiers and antenna modifications Part 15, Subpart C, Section 15.205 Restricted bands of operation Part 15, Subpart C, Section 15.207 Conducted limits Part 15, Subpart C, Section 15.209 Radiated emission limits, general requirements Part 15, Subpart C, Section 15.247 Operation within the bands 902 - 928 MHz, 2400 - 2483.5 MHz and 5725 - 5850 MHz ANSI C63.10: 2013 Testing Unlicensed Wireless Devices ETSI TR 100 028 V1.3.1: 2001-03, Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Uncertainties in the Measurement of Mobile Radio Equipment Characteristics—Part 1 and Part 2 KDB 558074 D01 v05r02 Guidance for compliance measurements on DTS; FHSS and hybrid system devices operating under Section 15.247 of the FCC rules, April 2, 2019. FCC ID: 2ADQTV1EL IC: 12568A-V1EL CSA Group Bayern GmbH File No. T46146-00-03FX, page 4 of 50 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 6.0 2019-12-18 2 EQUI P M E N T U N D E R T E S T 2.1 Information provided by the Client Please note, we do not take any responsibility for information provided by the client or his representative which may have an influence on the validity of the test results. 2.2 Sampling The customer is responsible for the choice of sample. Sample configuration, start-up and operation is carried out by the customer or according his/her instructions. 2.3 General remarks None. 2.4 Photo documentation of the EUT – Detailed photos see ATTACHMENT A 2.5 Equipment type BLE device, mobile equipment 2.6 Short description of the equipment under test (EUT) The EUT is a Bluetooth 4.0 Low Energy system. The EUT is compatible with the standard 802.15.1. It supports the 2.4 GHz frequency band. The EUT consists of a temperature and humidity sensor used in the building industry. The measurement data is transferred via Bluetooth to a digital device several times a day. Number of tested samples: 2 Serial number: 300268 (conducted), 300269 (radiated) Firmware version: 0120007048 EUT configuration: (The CDF filled by the applicant can be viewed at the test laboratory.) 2.7 Variants of the EUT There are no variants. FCC ID: 2ADQTV1EL IC: 12568A-V1EL CSA Group Bayern GmbH File No. T46146-00-03FX, page 5 of 50 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 6.0 2019-12-18 2.8 Operation frequency and channel plan The operating frequency is 2400 MHz to 2483.5 MHz. Channel plan BT-Standard 802.15.1: Note: the marked frequencies are determined for final testing. 2.9 Transmit operating modes The EUT uses GFSK modulation and may provide following data rates: - 1000 kbps (kbps = kilobits per second) 2.10 Antennas The following antenna shall be used with the EUT: Number Characteristic Model number Plug Frequency range (GHz) Gain (dBi) Cable loss (dB) Effective gain (dBi) 1 Omni- Directional ANT3216…

Text truncated - open the document above for the full version.

FCC ID: 2ADQTV1EL IC: 12568A-V1EL CSA Group Bayern GmbH File No. T46146-00-03FX, page 11 of 49 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 6.0 2019-12-18 5 T E S T C O N D I T I O N S A N D R E S U L T S 5.1 EBW and OBW For test instruments and accessories used see section 6 Part MB. 5.1.1 Description of the test location Test location: Shielded Room S6 5.1.2 Photo documentation of the test set-up FCC ID: 2ADQTV1EL IC: 12568A-V1EL CSA Group Bayern GmbH File No. T46146-00-03FX, page 12 of 49 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 6.0 2019-12-18 5.1.3 Applicable standard According to FCC Part 15, Section 15.247(a)(2): Systems using digital modulation techniques may operate in the 902 - 928 MHz, 2400 – 2483.5 MHz and 5725 – 5850 MHz bands. The minimum 6 dB bandwidth shall be at least 500 kHz. 5.1.4 Description of Measurement The bandwidth was measured at an amplitude level reduced from the reference level of a modulated channel by a ratio of -6 dB. The reference level is the level of the highest signal amplitude observed at the transmitter at either the fundamental frequency or the first order modulation products in all typical modes of operation, including the unmodulated carrier, even if atypical. An alternative is to use the bandwidth measurement of the analyser. Spectrum analyser settings for EBW: RBW: 100 kHz, VBW: 300 kHz, Detector: Max peak, Sweep time: 5 s, Span: 2 EBW; Spectrum analyser settings for OBW: RBW: 1-5% OBW, VBW: 3 RBW, Detector: Max peak, Sweep time: 5 s, Span: 2 OBW; 5.1.5 Test result 6 dB Bandwidth DUT Frequency (MHz) Bandwidth (MHz) Limit Min (MHz) Limit Max (MHz) Band Edge Left (MHz) Band Edge Right (MHz) Max Level (dBm) Result 2402.000000 0.772278 0.500000 --- 2401.623762 2402.396040 1.6 PASS 2440.000000 0.772278 0.500000 --- 2439.623762 2440.396040 1.4 PASS 2480.000000 0.772278 0.500000 --- 2479.623762 2480.396040 0.6 PASS FCC ID: 2ADQTV1EL IC: 12568A-V1EL CSA Group Bayern GmbH File No. T46146-00-03FX, page 16 of 49 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 6.0 2019-12-18 5.1.8 Transmitter frequency stability The tests were performed in a climatic chamber: T = -20°C, CH37 FCC ID: 2ADQTV1EL IC: 12568A-V1EL CSA Group Bayern GmbH File No. T46146-00-03FX, page 20 of 49 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 6.0 2019-12-18 5.2 Maximum peak radiated output power For test instruments and accessories used see section 6 Part CPR 3. 5.2.1 Description of the test location Test location: Anechoic chamber 1 5.2.2 Photo documentation of the test set-up FCC ID: 2ADQTV1EL IC: 12568A-V1EL CSA Grou…

Text truncated - open the document above for the full version.