2ADQZFRS1FRS RADIO

PTT Button TALKPOD ® FRS RADIO RF Exposure and Product Safety Instructions for Portable Two-Way Radios General Populated and Uncontrolled Environments. ATTENTION The Talkpod logo are trademarks or registered trademarks of Talkpod Technology Co., ltd and are used under license.All other trademarks are the property of their respective owners. ©2023 Talkpod Technology Co., ltd.All rights reserved. Printed in China : Before using this radio, refer to the important operating instructions for safe usage and RF energy awareness and control for compliance with applicable Standards and Regulations. Compliance with RF Exposure Standards Your Talkpod Two-Way radio complies with the following RF energy exposure standard and guidelines: United States Federal Communications Commission, Code of Federal Regulations; 47 CFR et seq. & FCC. •Institute of Electrical and Electronic Engineers (IEEE) C95.1. •International Commission on Non-Ionizing Radiation Protection (ICNIRP). •Ministry of Health (Canada) Safety Code 6 & Industry Canada RSS-102. •Australian Communications Authority Radiocommunications Standard et seq. Transmit and Receive Procedure Your two-way radio contains a transmitter and a receiver. To control your exposure and ensure compliance with the general population/ uncontrolled environment exposure limits, always adhere to the following procedure: •Transmit no more than 50% of the time. •To receive calls, release the Push-to-Talk (PTT) button. •To transmit (talk), press the PTT button in front of the face. •Hold the radio in a vertical position with the microphone (and other parts of the radio including the antenna) at least one inch (2.5 centimeters) away from the nose or lips. Keeping the radio at a proper distance is important to ensure compliance. Note: RF exposure decreases with increasing distance from the antenna. Please refer to the following websites for more information on what •Body Worn Operation. When worn on the body, always place the radio in a Talkpod-approved clip, holder, holster, case or body harness for this product. RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits: •http://www.fcc.gov/oet/rfsafety/rf-faqs.html •www.who.int/en/ This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1.This device may not cause interference, and Two-way Radio Operation accessories may exceed the applicable RF exposure guidelines (iEEE, ICNIRP or FCC). •Use only Talkpod-approved supplied or replacement an •For a list of Talkpod-approved accessories for your radi tennas, batteries, and audio accessories. Use of non- Talkpod-approved antennas, batteries, and wired or wireless o model, visit the following website: http:// www.motorolasolutions.com/TalkaboutAccessories. Electromagnetic Interference/Compatibility Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.This device may not cause harmful interference, and 2.This device must accept any interference received, including interference that may cause undesired operation. 2.This device must accept any interference received, including interference that may cause undesired operation of the device. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. Aircraft When instructed to do so, turn off your radio when onboard an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions. Medical Devices – Pacemakers, Defibrillators or other Implanted Medical Devices Persons with pacemakers, Implantable cardioverter-defibrillators (ICDs) or other active implantable medical devices (AIMD) should: •Consult with their physicians regarding the potential risk of interference from radio frequency transmitters, such as portable radios (poorly shielded medical devices may be more susceptible to interference). •Turn the radio OFF immediately if there is any reason to suspect that interference is taking place. •Do not carry the radio in a chest pocket or near the implantation site, and carry or use the radio on the opposite side of their body from the implantable device to minimize the potential for interference. Hearing Aids Some digital wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Use of Communication Devices While Driving Always check the laws and regulations on the use of radios in the areas where you drive. •Give full attention to driving and to the road. •Use hands-free operation, if available. •Pull off the road and park before making or answering a call, if driving conditions or regulations so require. For Vehicle With Air Bags Refer to the vehicle manufacturer’s manual prior to installation of electronic equipment to avoid interference with air bag wiring. Do not place a portable radio in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of the vehicle. Potentially Explosive Atmosphere Turn off your radio prior to entering any area with a potentially explosive atmosphere. O…

Text truncated - open the document above for the full version.

Quanshun Communication Technology Co., Ltd ADD: Quanshun Bldg., Daxiamei, Nan'an, Quanzhou, Fujian, China TEL: (86 595) 86753355 FAX: (86 595) 86758299 Mail Address: [email protected] CFR 47 §2.911(d)(5)(i)(ii) Attestation Letter Attestation Letter Date: 06-01-2023 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i)(ii) Filing FCC ID: 2ADQZFRS1 Quanshun Communication Technology Co., Ltd (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Quanshun Communication Technology Co., Ltd (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature Contact Person: Roger Chen Title: Manager

QA-FR-170-B Quanshun Communication Technology Co., Ltd ADD: Quanshun Bldg., Daxiamei, Nan'an, Quanzhou, Fujian, China TEL: (86 595) 86753355 FAX: (86 595) 86758299 Mail Address: [email protected] FCC Authorization Date: 2023-06-01 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Quanshun Communication Technology Co., Ltd, hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Printed Name: Roger Chen Title: Manager

QA-FR-171-A Quanshun Communication Technology Co., Ltd ADD: Quanshun Bldg., Daxiamei, Nan'an, Quanzhou, Fujian, China TEL: (86 595) 86753355 FAX: (86 595) 86758299 Mail Address: [email protected] FCC Confidential Authorization 2023-06-01 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2ADQZFRS1 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Quanshun Communication Technology Co., Ltd, hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description  BOM  Tune Up Procedure The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature Typed or Printed Name: Roger Chen Title: Manager

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS USB port(Factory program use only)

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Antenna

TEST REPORT Applicant: Quanshun Communication Technology Co., Ltd Address: Quanshun Bldg., Daxiamei, Nan'an, Quanzhou, Fujian, China FCC ID: 2ADQZFRS1 Product Name: FRS RADIO Model Number: FRS1 Standard(s): 47 CFR Part 15 Subpart B ANSI C63.4-2014 The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230420152-00A Date Of Issue: 2023/5/10 Reviewed By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230420152-00A Page 2 of 18 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230420152-00A Page 3 of 18 CONTENTS TEST FACILITY ............................................................................................................................................................. 2 DECLARATIONS ............................................................................................................................................................ 2 DOCUMENT REVISION HISTORY ......................................................................................................................... 4 1. GENERAL INFORMATION ................................................................................................................................... 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................................... 5 1.2 DESCRIPTION OF TEST CONFIGURATION ................................................................................................................ 6 1.2.2 Support Equipment List and Details .............................................................................................................. 6 1.2.3 Support Cable List and Details ...................................................................................................................... 6 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 6 1.3 MEASUREMENT UNCERTAINTY .............................................................................................................................. 7 2. SUMMARY OF TEST RESULTS ........................................................................................................................... 8 3. REQUIREMENTS AND TEST PROCEDURES ................................................................................................... 9 3.1 AC LINE CONDUCTED EMISSIONS .......................................................................................................................... 9 3.1.1 EUT Setup...................................................................................................................................................... 9 3.1.2 EMI Test Receiver Setup ............................................................................................................................... 9 3.1.3 Test Procedure ............................................................................................................................................. 10 3.1.4 Corrected Amplitude & Margin Calculation ................................................................................................ 10 3.2 RADIATION SPURIOUS EMISSIONS ........................................................................................................................ 11 3.2.1 EUT Setup.................................................................................................................................................... 11 3.2.2 EMI Test Receiver Setup ............................................................................................................................. 12 3.2.3 Test Procedure ............................................................................................................................................. 12 3.2.4 Corrected Amplitude & Margin Calculation ................................................................................................ 12 4. TEST DATA AND RESULTS ................................................................................................................................ 13 4.1 AC LINE CONDUCTED EMISSIONS ........................................................................................................................ 13 4.2 RADIATION SPURIOUS EMISSIONS ...................................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emission Below 1GHz Front View Radiated Emission Above 1GHz Front View