2ADQZGMRS1Mulit Band Transceiver

Multi Band Transceiver User Manual Thanks for your favor in our product. This manual is helpful for you to quickly know how to use the product. This manual is applicable to the following product: Multi Band Transceiver FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. SAR tests are conducted using standard operating positions accepted by FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. Before a new model is a available for sale to the public, it must be tested and certified to the FCC that is does not exceed the exposure limit established by th e FCC. Tests for each product are performed in positions and locations as required by the FCC. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with and accessory designated for this product or when us ed with and accessory that contains no metal. To maintain compliance with FCC RF exposure guidelines hold the transmitter and antenna at least 1 inch (2.5 centimeters) from your face and speak in a normal voice, with the antenna pointed up and away from the face. The equipment complies with FCC radiation exposure limits set forth for and uncontrolled environment. In order to comply with the FCC RF exposure requirement, the antenna installation must comply with following: To maintain compliance with FCC RF exposure guidelines hold the transmitter and antenna at least 1 inch (2.5 centimeters) from your face and speak in a normal voice, with the antenna pointed up and away from th e face. The equipment complies with FCC radiation exposure limits set forth for and uncontrolled environment. In or der to comply with the FCC RF exposure requirement, the antenna installation must comply with following: Users must be fully aware of the hazards of the exposure and able to exercise control over their RF exposure to qualify for the higher exposure limits. Users must be fully aware of the haz ards of the exposure and able to exercise control over their RF exposure to qualify for the higher exposure limits. Your wireless hand - held portable transceiver contains a low power transmitter. This product sends out radio frequency (RF) signals when the Push- - to - Talk(PTT) button is pressed. The device is authorized to operate at a duty factor not to exceed 50%. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Contents Welcome to the world of Talkpod technology General information Preface Disclaimer RF Radiation Information RF Radiation Profile RF Radiation Safety Operational Instructions and Training Guidelines EU Regulatory Conformance Basic Operation And Installation Radio Structure Button Details Specifications Attach Battery Assemble Antenna Assembling the Belt Clip LED Indicator Assembling the Accessories Charge the radio Powering On/Off Button Details Channel Selection Button Side Buttons PTT Buttons A36 menu description Care Troubleshooting Optional Accessories Product Care 01 01 01 01 02 02 Congratulations on your purchase of a high quality Talkpod product. Your 2-way radio represents state-of-the-art high-tech engineering. Designed for GMRS (General Mobile Radio Service) operation, this compact package is big on performance. It is a quality piece of electronicequipment, skillfully constructed with the finest components. The circuitryis all solid-state and mounted on arugged printed circuit board. Your twoway radio is designed for reliable and trouble-fr ee performance for yearsto come 01 02 05 06 06 07 07 08 08 09 09 09 10 03 04 04 05 14 15 17 Features 30 GMRS Channels Monitor Function Roger Beep Tone Silent Operation 142 Privacy Codes (38 CTCSS / 104 DCS) VOX Selectable Call Alert (5 additional Animal Sounds on GXT1050) NOAA Weather Radio NOAA Weather Alert NOAA Weather Scan Dual Watch Waterproof JIS4 Standard Vibrate Alert This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device does not cause harmful interference, and (2) this radio must accept any interference that may cause undesired operation. To maintain compliance with FCC’s RF exposure guidelines, for body-worn operation, this radio has been tested and meets the FCC RF expos ure guidelines when used with Quanshun Communication Technology Co., Ltd. accessories supplied or designated for this product. Keypad Lock Whisper Function SOS Siren Power HI/LO Settings Speaker / Microphone Jacks Battery Meter / Battery Low Indicator Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Important Notice General information 0 Preface Thanks for your favor in our product. This manual is helpfulfor you to quickly know how to use the prodcut. T…

Text truncated - open the document above for the full version.

Quanshun Communication Technology Co., Ltd ADD: Quanshun Bldg., Daxiamei, Nan'an, Quanzhou, Fujian, China TEL: (86 595) 86753355 FAX: (86 595) 86758299 Mail Address: [email protected] Date:2022-10-15 Attestation Letter FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: We declare that our product: Mulit Band Transceiver (model: A36plus, A36, A36P, A361, A37, A371, UV-37, UV-A37, EP-UVA37, UV36, UV37, FCC ID: 2ADQZGMRS1). The product has locked the TX frequency to 30 Channels by firmware, and then end-users could not unlock the limited band out of range neither by software programming on PC nor manually programming. It will get failed message if the end users program the TX range out of the frequency. Please contact me if there is need for any additional clarification or information. Best Regards, Sincerely Yours, Signature: Printed Name: Roger Chen Title: Manager

QA-FR-171-A Quanshun Communication Technology Co., Ltd ADD: Quanshun Bldg., Daxiamei, Nan'an, Quanzhou, Fujian, China TEL: (86 595) 86753355 FAX: (86 595) 86758299 Mail Address: [email protected] FCC Confidential Authorization 2022-10-15 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2ADQZGMRS1 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Quanshun Communication Technology Co., Ltd, hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description  Parts List/Tune up procedure (for licensed devices)  Internal Photo The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature Typed or Printed Name: Roger Chen Title: Manager

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS Belt Clip Antenna

1.Specifications No Item Specifications 1 Frequency 2 Gain 0dBi 3 V.S.W.R(in BW) ≤2.0 4 Azimuth Beam width 0mni-directional 5 Polarization Linear 6 Impedance 50Ω 2. Antenna Pattern 400-470MHz Antenna Report 7 Model Ant-A36 9 8 Manufacture Address Quanshun Communication Technology Co., Ltd Quanshun Bldg., Daxiamei, Nan'an, Quanzhou, Fujian, China 462.6250MHz 136-174MHz 462.6375MHz 136MHz 174MHz 3. Antenna Picture

TEST REPORT Applicant: Quanshun Communication Technology Co., Ltd Address: Quanshun Bldg., Daxiamei, Nan’an, Quanzhou, Fujian, China FCC ID: 2ADQZGMRS1 Product Name: Mulit Band Transceiver Standard(s): 47 CFR Part 95 Subpart E ANSI C63.26-2015 ANSI/TIA 603-E-2016 The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR221047779-00B Date Of Issue: 2023/3/13 Reviewed By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR221047779-00B Page 2 of 47 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR221047779-00B Page 3 of 47 CONTENTS TEST FACILITY .......................................................................................................................................... 2 DECLARATIONS .......................................................................................................................................... 2 DOCUMENT REVISION HISTORY .......................................................................................... 4 1. GENERAL INFORMATION .................................................................................................... 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 5 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.1 EUT Operation Condition: ............................................................................................................................. 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 7 1.3 MEASUREMENT UNCERTAINTY .......................................................................................................... 8 2. SUMMARY OF TEST RESULTS ............................................................................................ 9 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 10 3.1 GMRS frequency accuracy ............................................................................................................................. 10 3.1.1 Applicable Standard ..................................................................................................................................... 10 3.1.2 EUT Setup Block Diagram .......................................................................................................................... 10 3.1.3 Test Procedure ............................................................................................................................................. 10 3.2 RF Output Power ............................................................................................................................................ 12 3.2.1 Applicable Standard ..................................................................................................................................... 12 3.2.2 EUT Setup Block Diagram .......................................................................................................................... 12 3.2.2 Test Procedure ............................................................................................................................................. 12 3.3 GMRS emission types ..................................................................................................................................... 13 3.3.1 Applicable Standard ..................................................................................................................................... 13 3.3.2 Judgment ...................................................................................................................................................... 13 3.4 GMRS Authorized Bandwidth ........................................................................................................................ 14 3.4.1 Applicable Standard ...............................................................................…

Text truncated - open the document above for the full version.

SAR TEST REPORT Applicant: Quanshun Communication Technology Co., Ltd Address: Quanshun Bldg., Daxiamei, Nan'an, Quanzhou, Fujian, China FCC ID: 2ADQZGMRS1 Product Name: Mulit Band Transceiver Model Number: A36plus Multiple Numbers: A36, A36P, A361, A37, A371, UV-37, UV-A37, EP-UVA37, UV36, UV37 Standard(s): 47 CFR Part 2(2.1093) The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR221047779-20 Date Of Issue: 2022-12-07 Reviewed By: Karl Gong Title: SAR Engineer Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR221047779-20 Page 2 of 59 SAR TEST RESULTS SUMMARY Operation Frequency Bands Highest Reported 1g SAR (W/kg) Limits (W/kg) Head Face Up (Gap 25mm) Body-Worn (Gap 0mm) PTT(462.5500-467.7250MHz) 0.190.361.6 Maximum Simultaneous Transmission SAR Items Head Face Up (Gap 25mm) Body-Worn (Gap 0mm) Limits Sum SAR(W/kg) N/A N/A 1.6 SPLSR N/A N/A 0.04 EUT Received Date: 2022/10/09 Tested Date: 2022/10/10 Tested Result: Pass China Certification ICT Co., Ltd (Dongguan) Report No.: CR221047779-20 Page 3 of 59 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR221047779-20 Page 4 of 59 CONTENTS SAR TEST RESULTS SUMMARY .............................................................................................. 2 TEST FACILITY .......................................................................................................................................... 3 DECLARATIONS .......................................................................................................................................... 3 DOCUMENT REVISION HISTORY .......................................................................................... 6 1. GENERAL INFORMATION .................................................................................................... 7 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 7 1.2 TEST SPECIFICATION, METHODS AND PROCEDURES ........................................................................ 8 1.3 SAR LIMITS .......................................................................................................................................... 9 2. SAR MEASUREMENT SYSTEM .......................................................................................... 10 3. EQUIPMENT LIST AND CALIBRATION .......................................................................... 17 3.1 EQUIPMENTS LIST & CALIBRATION INFORMATION ....................................................................... 17 4. SAR MEASUREMENT SYSTEM VERIFICATION ........................................................... 18 4.1 LIQUID VERIFICATION ...................................................................................................................... 18 4.2 SYSTEM ACCURACY VERIFICATION ................................................................................................. 19 4.3 SAR SYSTEM VALIDATION DATA ............................................................................................. 20 5. EUT TEST STRATEGY AND METHODOLOGY .............................................................. 21 5.1 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR ......................................... 21 5.2 CHEEK/TOUCH POSITION .................................................................................................................. 22 5.3 EAR/TILT POSITION ........................................................................................................................... 22 5.4 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS ................................................ 23 5.5 TEST DISTANCE FOR SAR EVALUATION .......................................................................................... 24 5.6 SAR EVALUATION PROCEDURE ....................................................................................................... 25 6. CONDUCTED OUTPUT POWER MEASUREMENT ........................................................ 26 6.1 TEST PROCEDURE .............................................................................................................................. 26 6.2 MAXIMUM TARGET OUTPUT POWER ............................................................................................... 26 6.3 TEST RESULTS: ...................................................................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emission Below 1GHz View Radiated Emission Above 1GHz View