2ADR9FT01ASMART WATCH WITH BLUETOOTH MODULE

FashionFit WHAT’S INCLUDED Your FashionFit includes: • Watch module • Silicon case with band • Metal bangle • Charger WHAT FASHIONFIT TRACKS Your FashionFit tracks: • Steps taken • Calories burned • Distance traveled • Active time • Time slept / deep sleep CHARGING YOUR FASHIONFIT Your FashionFit must be charged before start using it. And you should charge your FashionFit when a flashing empty battery appear on the display. This flashing symbol is to let you know the battery power is down to 15% or below. To charge your FashionFit, please follow the steps below. 1. Remove your watch module from the metal bangle or silicon case. 2. Plug your charging cable into a USB port on your computer. 3. Insert your watch module into the charger as per the instruction attached to the charger. 4. You watch module will show a charging symbol which is a battery with lightning sign. This symbol will disappear in a few seconds. You can bring it back by pressing the buttons on the side watch module. 5. Charge until the battery sign is filled up. It usually takes 3 to 4 hours to fully charge the battery. Your FashionFit will run for 3 to 4 days before next charging. HOW TO PUT ON YOUR FASHIONFIT The watch module is interchangeable between the silicon case and the metal bangle. First, align the ridges on the side of the watch module with the notches on the back side of the silicon case or metal case. Then, plug the watch module into the silicon case or metal case. CARE AND WEARING TIPS The following are tips when caring for your FashionFit: • Clean and dry the FashionFit regularly, particularly under the band. • Wear your FashionFit band loosely enough to allow air circulation. • Use skin care products sparingly on the areas of the wrist covered by the FashionFit. SETTING THE TIME You do not need to set the time manually. When synchronizing the data on your watch to the apps on your phone, the time of your phone will be synchronized to the watch. TURNING YOUR FASHIONFIT ON Press and hold the button at 3:00 for 3 seconds. If the watch does not turn on after removal from the box, it will need to be charged before it is able to turn on. TURNING YOUR FASHIONFIT OFF Press and hold button at 3:00 for 5 seconds. WATCH MODULE BUTTON OPERATION • Press 3:00 button to display: o “ANNE KLEIN” logo o Time & date o Calorie burned FashionFit o Steps taken o Distance traveled o Time sleep / deep sleep • Press 9:00 button to show sleep mode: o If the sleep mode is off (it shows “Z OFF”), press 3:00 to start sleep monitoring. o If the sleep mode is on (it shows “Z ON”), press 3:00 to stop sleep monitoring. Then, it will show the monitoring result of the sleep. SETTING UP FASHIONFIT ON A MOBILE PHONE 1. Install the FashionFit app. (You can find the FashionFit app on the iOS App store or Google Play store by searching for “FashionFit”.) FashionFit runs on Android 4.3 and above, iOS 7 and above. 2. Turn on the Bluetooth on your mobile phone. 3. On the watch module, press 3:00 button until it shows “ANNE KLEIN” logo. 4. Press and hold the 9:00 button for a few seconds, it will show a validation code which is in 12 digits or letters. 5. Enter this validation code to the apps. (at setting section, in the tab “Device”) 6. Before you finish inputting the validation code, the display will blackout in 15 second. You can bring it back just by pressing the buttons. 7. After entering the validation code, tap “Pairing”. 8. Input the requred info in the tab “Info”. 9. Set your goal by entering no. of step in tab “Goal”. 10. Then go to “Home” page and tap “Sync” to sync the fitness data and time. 11. You can also tap “Start” to activate real time monitoring your fitness data like steps, distance, etc. To stop the real time monitoring, tap “Stop”. OTHER FEATURES OF THE APPS • When the daily goal is achieved, there will be a gold star tagged right at the date so you can see how much of your achievement. • The apps provides weekly, monthly and yearly report. You can review your fitness data history easily. MEMORY Your FashionFit holds the detailed data for the most recent 7 days. The recorded data consists of steps taken, calories burned, distance traveled, active time and sleep monitoring. Sync your FashionFit regularly to have the most detailed data available to view on your mobile phone installed with FashionFit apps. REGULATORY NOTICE Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product. NOTE: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : • Reorient or relocate the receiving antenna. • Increase the separation between the product and receiver. • Connect the product into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FashionFit This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT SAFETY INSTRUCTIONS While your FashionFit is designed to be worn 24/7, its components are electronic and susceptible to damage i…

Text truncated - open the document above for the full version.

CLARITY LIMITED Authoritv to Act as Agent Date: Jan 30. 2015 American Certification Body, Inc. 6731 Whittier Avenue suite cl l0 Mclean, VA 22101 To Whom It May Concern: SGS IECC limited is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR I .2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank vou. Agency Agreement Expiration pate: Until further notice. By: Title: On behalf of: Telephone: T.euns Kai Yuk (Print name) Engineering Manager Clarity Limited (Company Name) 852-242422t1 I - N4ust bo signccl b,r' applicant oontact given lbr applicant cxr the PCC site, or by tlie authorized agent if nn nppropriate authorized agent letler has been provided. l,etters should be placed on approl;riate letterhead. 022311 - 6 (Signature CLARITY LIMITED Request for Confidentiality Date: Jan 30.2015 Subject; Confidentiality Request for: 2ADR9FT0IA Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested fl Short Term ! Short Term fl Short Term I Short Term ! Short Term I Short Term I Short Term n Short Term ! Short Term I Permanent I Permanent*2 I Permanent I Permanent ! Permanent [lPermanent I Permanent* Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos User's Manual *Note: (Insert Explanation as Necessarv) (lnsert Company Name) has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confi dentiality: The applicant requests the exhibits listed above as permanently confrdential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confi dentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period ofdays from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By:Leung Kai Yuk (Print name) ' - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: "The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting." ' - N'{ust be signed by applicant conti}ct given fbl applicant on the FCC site. or by the autlrorized agent i1'an ap1:ropriate autholizod agcnt letter has becn provicled. Letters should be placed cln applopriate letterhead. 022311-6

CLARITY LIMITED Authorization Letter December 5,2012 Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Dear Sir/Madam We, the undersigned, hereby authorize SGS IECC Limited to act on our behalf in all matter relating to FCC equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by SGS IECC Limited on our behalf shall have the same effect as acts of our own. This authorization is valid for the FCC Certification with FCC lD: 2ADR9FT01A and expires on until further notice. Signature: Name: Leunq Kai Yuk Title: Enqineerinq Manager

FCC ID: 2ADR9FT01A External Photo FCC ID: 2ADR9FT01A FCC ID: 2ADR9FT01A FCC ID: 2ADR9FT01A FCC ID: 2ADR9FT01A

FCC ID: 2ADR9FT01A Internal Photo FCC ID: 2ADR9FT01A FCC ID: 2ADR9FT01A FCC ID: 2ADR9FT01A

Report No.: HKES150100009802 Page: 1 of 21 Authorized Signature: CHEN Jian-feng, Jeffrey The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS IECC Limited or testing done by SGS IECC Limited in connection with, distribution or use of the product described in this report must be approved by SGS IECC Limited in writing. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. FCC ID: 2ADR9FT01A Member of the SGS Group (SGS SA) FCC Test Report Application No.: HKES150100009801 Applicant: CLARITY LTD Address: Flat A-B, 12/F, Sing Mei Industrial Building 29-37 Kwai Wing Road, Kwai Chung, N.T. Hong Kong Product Information: Product Description: Smart Watch with Bluetooth Module Model: FT01A Product Class : Low Power Communication Device – Transmitter (2.4 GHz) FCC ID: 2ADR9FT01A Requirement: CFR 47 FCC PART 15 SUBPART C, 2014 - Intentional Radiators (Section 15.249) Date of Receipt: 2015-01-20 Date of Test: 2015-01-29 to 2015-02-03 Date of Issue: 2015-02-04 Test Result : PASS* In the configuration tested, the EUT complied with the requirements for the relevant clauses of Federal Communications Commission Rules as specified above. Report No.: HKES150100009802 Page: 2 of 21 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. FCC ID: 2ADR9FT01A Member of the SGS Group (SGS SA) 2 Test Summary Test Test Requirement Test Method Result Conducted Emission (150KHz to 30MHz) FCC PART 15, SUBPART C: 2014 ANSI C63.4:2003 NA Radiated Emission (9kMHz to 1GHz) FCC PART 15, SUBPART C: 2014 ANSI C63.4:2003 PASS Radiated Emission above 1 GHz FCC PART 15, SUBPART C: 2014 ANSI C63.4:2003 PASS Band edge / 20 dB Bandwidth FCC PART 15, SUBPART C: 2014 ANSI C63.4:2003 Marker-Detla measurement PASS Report No.: HKES150100009802 Page: 3 of 21 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. FCC ID: 2ADR9FT01A Member of the SGS Group (SGS SA) 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 2 3 CONTENT…

Text truncated - open the document above for the full version.

FCC ID: 2ADR9FT01A Setup Photo Radiated Emission FCC ID: 2ADR9FT01A FCC ID: 2ADR9FT01A FCC ID: 2ADR9FT01A