2ADTD-CP05016401114AX HYBRID PRO

N.ON.C N.ON.C 2K22K2 8K28K2 LAN N.O N.C OUTPUT CONTROL N.C N.O 2K2 EOL 2K2 EOL Single EOL RS-485 SOUNDER Double EOL Triple EOL 2K2 EOL 2K2 EOL N.C 2K2 2K2 N.O 8 Double Zone HangzhouHikvisionDigitalTechnologyCO.,Ltd.No.555QianmoRoad,BinjiangDistrict,Hangzhou310052,China E N G L I S H 12 4 Specification Appearance Note: Power down the control panel before wiring accessories and peripherals. 1-3. Mount the back case. 4. Fix the telephone module (sold separately) and wiring. 5. Fix the GPRS/4G module (sold separately). 6. Wire power supply and network. 1 Set Up User Manual Installation and Wiring AX HYBRID PRO Quick Start Guide 2 3 4 UD24855B-B 1. Telephone Module Slot 4. Reset Button 7. GPRS/4G Slot8. Lid Opened Switch9. LAN 5. WiFi Mode Switch*6. SD Card Slot* 2. Power Supply3. Battery Terminal Power SupplyWiring Network Wiring Peripherals Wiring: Telephone Module Wiring 2 3 1 a d b e c f 2 4 7. Close the case of the control panel. Set up via Web Client For more activation methods, refer to the User Manual. Default IP Address: AP connection (Hotspot mode):192.168.8.1 Network cable connection: 192.0.0.64 1. Enter the device IP address in the web browser. 2. Create a password for admin account to activate the device. Reset: After the device is started, hold the reset button for 10 seconds to reset the device. *Note: WIFI mode and SD card slot are equipped according to the model. Indicator Mobile Act PSTN Link System Power EN 50131-3:2009, EN 50131-10:2014 EN 50136-2:2013, EN 50136-1:2012+A1:2018 EN 50131-6:2017, EN 50131-1:2006+A1:2009+A2:2017+A3:2020 EN 50130-4:2011+A1:2014, EN 50130-5:2011 Security Grade 2, Environment Class II, SP4 1 2 3 4 5 7 8 9 6 GPRS Telephone Module OR 4G 1 3 4 5 6 2 HOTSPOTWLAN HOTSPOT WLAN 4 1 2 a b c d e 3 8 BACK f Model48Series64Series Tag4864 Keyfob4864 Keypad48 Zones 48(8on-boardzones,max4 wiredPIRCAM) 64(8on-boardzones,max8wired PIRCAM) Area1632 Operator:46Operator:62 SMSnotification Onboardvideoclips24 Programmingtools Firmwareupgrade Alarmoutput 48(Including2on-board relayoutputs) 64(Including2on-boardrelay outputs) PowerOutput 3/4Gonboard GPRSonboard Wi-Fi/802.11b/g/n(2.4GHz) Bus Sounderoutput Netowrkinterface Powerinterface Operation temperature Operationhumidity Shellmaterial Color Dimension(W×H×D) Weight996.5g997g User Installer:1 Administrator:1 Supports(withGPRS/3G/4Gmodule) ARCprotocol ISAPI:SupportsiVMS-4200clientsoftwareandwebclient CloudP2P:SupportscloudP2Pprivacyprotocol DC-09:ARCaccessible(ADM-CID/SIA-DCS) CSV-IP：SupportsCSV-IP ISUP：SupportsISUP5.0 Web/iVMS-4200/Hik-ProConnect/Keypad Web/iVMS-4200/Hik-ProConnect 12V,1.5A Optional Optional 100to240VAC (On-boardpowertransformer) 1Speed-Xbus 1wiredon-boardsounderoutput Tamper-Proof 1switchtodetectremovalfrommounting 1switchtodetectfrontcoveropen 1RJ4510M/100MEthernetinterface -10°Cto40°C 10%to90% Plastic White 261mm×199mm×86.4mm PGM is a programable trigger output. PGM1 and PGM2 are 200mA(max.) trigger outputs with +/- trigger. They can be set at either normally open or normally closed (optional, function varies according to the panel model). If the current draw on PGM1/PGM2 is to exceed the current output, we recommend using a relay as shown in above Figure. Note: PGM is a programable trigger output. PGM1 and PGM2 are 200mA(max.) trigger outputs with +/- trigger. They can be set at either normally open or normally closed (optional, function varies according to the panel model). If the current draw on PGM1/PGM2 is to exceed the current output, we recommend using a relay as shown in above Figure. LEDTAMPERALARMFAULT EOLEOLEOL Z2COMZ1 RTRARF Resistors for NO/NC/Single EOL/Double EOL: 1K, 2.2K, 4.7K, 5.6K, 6.8K, 8.2K Triple EOL Wiring Method: Resistor of Tamper (RT): 1kΩ Resistor of Alarm (RA): 1kΩ Resistor of Fault/Masking (RF): 2.2kΩ Tamper Open Open Open Open Open4.2KΩ 3.2KΩ 1KΩ 2KΩ End resistance of the entire circuit is 0Ω. Close Close Close Close Close Close CloseClose Close Close Normal Alarm Fault Masking Short Circuit Circuit Resistance Detector Status RT RARF TamperTamper TamperTamper FRANÇAIS Spécification ModèleSérie 48 48 48 4 16 Installateur : 1 Administrateur : 1 Prise en charge (avec le module GPRS/3G/4G) ISAPI : prise en charge du logiciel client iVMS-4200 et du client web P2P cloud : prise en charge du protocole de confidentialité du P2P cloud DC-09 : accessible par ARC (ADM-CID/SIA-DCS) CSV-IP : prise en charge de CSV-IP ISUP : prise en charge d’ISUP 5.0 48 (comprend 2 sorties de relais intégrées) 64 (comprend 2 sorties de relais intégrées) Web/iVMS-4200/Hik-ProConnect/Pavé numérique Web/iVMS-4200/Hik-ProConnect 12 V, 1 A En option 1 bus Speed-X 1 sortie de sirène filaire intégrée 1 commutateur de détection du retrait du support de fixation 1 commutateur de détection d’ouverture du cache avant 1 interface Ethernet RJ45 10/100 Mbit/s 100 à 240 V CA (transformateur d’alimentation intégré) 10 à 90 % Plastique blanc 261 x 199 x 86,4 mm 996,5 g997 g -10 à 40 °C En option /802.11b/g/n (2,4 GHz) Opérateur : 46 24 Opérateur : 62 32 48 (8 zones intégrées, max. 4 PIRCAM filaires) 8 64 (8 zones intégrées, max. 8 PIRCAM filaires) 64 64 Série 64 Étiquette Porte-clés Pavé numérique Zones Zone Utilisateur Notification par SMS Clips vidéo intégrés Protocole ARC Outils de programmation Mise à niveau du firmware Sortie d’alarme Puissance de sortie 3G/4G intégrée GPRS intégré Wi-Fi Bus Sortie de sirène Protection anti- sabotage Interface réseau Interface d’alimentation Humidité de fonctionnement Matériau du boîtier Couleur Dimensions (L × H × P) Poids Température de fonctionnement Apparence 1. Emplacement du module téléphonique2. Alimentation électrique 3. Borne de batterie4. Bouton de réinitialisation 5. Commutateur de mode Wi-Fi*6. Emplacement pour carte SD* 7. Emplacement GPRS/4G8. Contact de capot ouvert 9. LAN * Remarque : le mode Wi-Fi et la fente pour carte SD sont disponibles selon le modèle. Installation et câblage Remarque : mettez la centrale hors tension avant de câbler les accessoires et l…

Text truncated - open the document above for the full version.

Hangzhou Hikvision Digital Technology Co., Ltd. We, Hangzhou Hikvision Digital Technology Co., Ltd. declare that this EUT (FCC ID: 2ADTD-CP05016401114) can be operating on “US/Canada frequencies”. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US and Canada. For DTS part of this device, only channels 1-11 will be used in North America. Country code selection is disabled. Should you have any questions or comments regarding this matter, Please have my best attention. Sincerely yours, Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Long Cheng Title: Testing & Certification Engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. Address No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Grantee Code 2ADTD FCC ID 2ADTD-CP05016401114 Authorized Contact Name Long Cheng Contact Email [email protected] Contact Phone +8618969187825 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 2022-10-28 Print Name: Long Cheng Title: Testing & Certification Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Hangzhou Hikvision Digital Technology Co., Ltd. Date: 2022-10-28 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ADTD-CP05016401114 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Long Cheng Title: Testing & Certification Engineer Signature: On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +8618969187825

Hangzhou Hikvision Digital Technology Co., Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Regarding: Confidentiality Request regarding application for FCC ID: 2ADTD-CP05016401114 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Long Cheng Title: Testing & Certification Engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 4 External Photos for KSCR2210002069AT Compliance Certification Services (Kunshan) Inc. Page: 2 of 4 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 4 Compliance Certification Services (Kunshan) Inc. Page: 4 of 4

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 5 Internal Photos for KSCR2210002069AT Compliance Certification Services (Kunshan) Inc. Page: 2 of 5 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 5 Compliance Certification Services (Kunshan) Inc. Page: 4 of 5 Compliance Certification Services (Kunshan) Inc. Page: 5 of 5

Compliance Certification Services (Kunshan) Inc. Report No.: KSCR221000206902 Page: 1 of 9 Eric Lin Laboratory Manager 1 Cover Page RF Exposure Evaluation Report Application No.: FCC ID: KSCR2210002069AT 2ADTD-CP05016401114 Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No.555 Qianmo Road,Binjiang District Hangzhou 310052,China Manufacturer: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Manufacturer: No.555 Qianmo Road,Binjiang District Hangzhou 310052,China Factory: 1, Hangzhou Hikvision Electronics Co., Ltd. 2, Hangzhou Hikvision Technology Co., Ltd. 3, CHONGQING HIKVISION TECHNOLOGY CO.,LTD. Address of Factory: 1, No.299,Qiushi Road,Tonglu Economic Development Zone,Tonglu County, Hangzhou,Zhejiang 2, No.700 Dongliu Road, Binjiang District, Hangzhou 310052, China 3, No. 118, Haikang Road, Area C, Jianqiao Industrial Park, Dadukou District, Chongqing, 401325,China Equipment Under Test (EUT): EUT Name: AX HYBRID PRO Model No.: DS-PHA64-LP Add Model No.: DS-PHA64-LPUHK, DS-PHA64-LPCKV, DS-PHA64-LPUVS, DS-PHA64-LPKVO, DS-PHA64-LPHUN, DS-PHA48-EP, DS-PHA48-EP UHK, DS-PHA48-EP CKV D, DS-PHA48-EP UVS, DS-PHA48-EP KVO, DS-PHA48-EP HUN Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2022-10-31 Date of Test: 2022-10-31 to 2022-11-03 Date of Issue: 2022-11-04 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR221000206902 Page: 2 of 9 Revision Record Version Description Date Remark 00 Original 2022-11-04 / Authorized for issue by: Damon Zhou/Project Engineer Eric Lin /Reviewer Compliance Certification Services (Kunshan) Inc. Report No.: KSCR221000206902 Page: 3 of 9 2 Contents Page 1 COVER PAGE .................................................................................................................................... 1 2 CONTENTS ........................................................................................................................................ 3 3 GENERAL INFORMATION ................................................................................................................ 4 3.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................ 4 3.2 DETAILS OF E.U.T. ....................................................................................................................... 4 3.3 SEPARATION DISTANCE ................................................................................................................ 4 3.4 TEST LOCATION ............................................................................................................................ 4 3.5 TEST FACILITY .............................................................................................................................. 5 4 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS .......................................................... 6 4.1 BLANKET 1 MW BLANKET EXEMPTION ........................................................................................... 6 4.2 MPE-BASED EXEMPTION .............................................................................................................. 6 4.3 SAR-BASED EXEMPTION ............................................................................................................... 7 5 MEASUREMENT AND CALCULATION ............................................................................................ 9 5.1 MAXIMUM TRANSMIT POWER ......................................................................................................... 9 5.2 RF EXPOSURE CALCULATION ........................................................................................................ 9 Compliance Certification Services (Kunshan) Inc. Report No.: KSCR221000206902 Page: 4 of 9 3 General Information 3.1 General Description of E.U.T. Power supply: AC 100-240V~50/60Hz 3.2 Details of E.U.T. Operation Frequency: 802.11b/g/n(HT20): 2412MHz to 2462MHz;802.11n(HT40): 2422MHz to 2452MHz Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK);802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) Number of Channels: 802.11b/g/n(HT20):11;802.11n(HT40):7 Channel Spacing: 5MHz Antenna Type: PCB Antenna Antenna Gain: 1.5dBi (Provided by manufacturer) 3.3 Separation Distance Separation distance between the antenna to person (R): ＞20cm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. E&E Lab 588 West Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China. Tel: +86 21 6191 5666 Fax: +86 21 6191 5678 No tests were sub-contracted. Note: 1. SGS is not responsible for wrong test results due to incorrect information (e.g. max. clock frequency, highest internal frequency, antenna gain, cable loss, etc ) is provided by the applicant. (if applicable). 2. SGS is not responsible for the authenticity, integrity and the validity of the conclusion based on results of the data provided by applicant. (if applicable). Compliance Certification Services (Kunshan) Inc. Report No.: KSCR221000206902 Page: 5 of 9 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L0599) CNAS has accredited SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. to ISO/IEC 17025:2017 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS- CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certifi…

Text truncated - open the document above for the full version.

Antenna Specifications Design Specifications Typical Antenna Type* PCB Working Frequency 2400-2500MHz Antenna Gain 1.5dbi Antenna Efficiency ≥ 45% VSWR ≤ 1.7 Impedance 50 ohm Overall Dimensions* 15mm*5mm 2.4GHz方向图

Compliance Certification Services (Kunshan) Inc. Report No.: KSCR221000206901 Page: 1 of 140 Eric Lin Laboratory Manager TEST REPORT Application No.: KSCR2210002069AT FCC ID: 2ADTD-CP05016401114 Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No.555 Qianmo Road,Binjiang District Hangzhou 310052,China Manufacturer: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Manufacturer: No.555 Qianmo Road,Binjiang District Hangzhou 310052,China Factory: 1, Hangzhou Hikvision Electronics Co., Ltd. 2, Hangzhou Hikvision Technology Co., Ltd. 3, CHONGQING HIKVISION TECHNOLOGY CO.,LTD. Address of Factory: 1, No.299,Qiushi Road,Tonglu Economic Development Zone,Tonglu County, Hangzhou,Zhejiang 2, No.700 Dongliu Road, Binjiang District, Hangzhou 310052, China 3, No. 118, Haikang Road, Area C, Jianqiao Industrial Park, Dadukou District, Chongqing, 401325,China Equipment Under Test (EUT): EUT Name: AX HYBRID PRO Model No.: DS-PHA64-LP, DS-PHA64-LPUHK, DS-PHA64-LPCKV, DS-PHA64-LPUVS, DS-PHA64-LPKVO, DS-PHA64-LPHUN, DS-PHA48-EP, DS-PHA48-EP UHK, DS-PHA48-EP CKV D, DS-PHA48-EP UVS, DS-PHA48-EP KVO, DS-PHA48-EP HUN  Remark : Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2022-10-31 Date of Test: 2022-10-31 to 2022-11-03 Date of Issue: 2022-11-04 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR221000206901 Page: 2 of 140 Revision Record Version Description Date Remark 00 Original 2022-11-04 / Authorized for issue by: Damon Zhou/Project Engineer Eric Lin /Reviewer Compliance Certification Services (Kunshan) Inc. Report No.: KSCR221000206901 Page: 3 of 140 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Average Output Power ANSI C63.10 (2013) Section 11.9.2 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.3 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Declaration of EUT Family Grouping: Note: There are series models mentioned in this report, and they are the similar in electrical and electronic characters. Only the model DS-PHA64-LP was tested since their differences were the model number and appearance. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR221000206901 Page: 4 of 140 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 7 4.1 DETAILS OF E.U.T. ............................................................................................................................... 7 4.2 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 7 4.3 POWER LEVEL SETTING USING IN TEST: .................................................................................................. 7 4.4 MEASUREMENT UNCERTAINTY .............................................................................................................. 8 4.5 TEST LOCATION .................................................................................................................................... 8 4.6 TEST FACILITY ...................................................................................................................................... 9 4.7 DEVIATION FROM STANDARDS ............................................................................................................... 9 4.8 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 9 5 EQUIPMENT LIST .................................................................................................................................... 10 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 12 6.1 ANTENNA REQUIREMENT .................................................................................................................... 12 6.1.1 Test Requirement: ....................................................................................................................... 12 6.1.2 Conclusion .....................................................................................................…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 3 Appendix Photographs of Test Setup for KSCR2210002069AT Test Model No.: DS-PHA64-LP Compliance Certification Services (Kunshan) Inc. Page: 2 of 3 Test Setup Photo Conducted Emissions at AC Power Line (150kHz-30MHz) RF Conducted Compliance Certification Services (Kunshan) Inc. Page: 3 of 3 Radiated Spurious Emissions Below 1GHz Radiated Spurious Emissions Above 1GHz