2ADTD-D0115021Wireless PIR Detector

Han gzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Wireless PIR Detector DS-PDP15P-EG2-WB User Manual 3 ENGLISH 85.9° (a) De tection Range 52 zones 4 planes User Manual Sp ecification APPEARA NCE 1. Indic ator2. Bracket Tamper Port 3. Battery 4. Tamper Switch 5. Power Switch TEST 4 INST ALLATION 3 1 2 EN ROLLMENT Sc an the QR code for more information and operation help. 10m 12m 1m 2m4m6m8m 10m 12m15m 15m 1m 2.4m 2m4m6m8m 10m 12m 15m 1m 2m 4m 6m 8m User Manual 3mi n 1 2 3 4 7 Time s 1234 Signal Str ength Test or a. b. xxxx Device I II III 1 2 4 3 5 3. Ba ttery 15m 85.9° Auto sensitivityYes Pet immunityUp to 30Kg (Height 40cm) Tamper protectionFront & Back LED indicatorBlue(alarm) Operating temperature -10 °C to 55 °C (14 °F to 131 °F) -10 °C to 40 °C (14 °F to 104 °F) Certified Storage temperature-20 °C to 60 °C (-4 °F to 140 °F) Operating humidity10% to 90% Installation height1.8 to 2.4m Dimension (W × H × D)65.5mm × 103mm × 48.5mm Weight128g Transmission frequency433?.?1 MHz RF range1.6Km (ope n area) BatteryCR123A x 1 (included) Standard battery life5 years I. Che ck signal strength. II. Install the device. III. (Optional)Install the device with bracket. a. Mount the detector with screw. b. Mount the detector with sponge tape. Detection range A SPECTO INSTALACIÓN REGISTRO I. Comprobar la intensidad de la señal. II. Instalar el dispositivo. a. Monte el sensor con tornillos. b. Monte el sensor con cinta adhesiva doble cara de espuma. III. Instalación del dispositivo con soporte (opcional). 1. Pilot o2. Puerto antimanipulación del soporte 4. Interruptor antimanipulación5. Interruptor de alimentación 3. Batería PRUEBA Manual de usuario Especificación Esc anee el código QR para obtener más información y ayuda sobre el funcionamiento. Alcance de detección Sensibilidad automática Inmunidad a las mascotas Protección antimanipulación Indicador led Temperatura de funcionamiento Temperatura de almacenamiento Humedad de funcionamiento Altura de instalación Dimensiones Peso Frecuencia de transmisión Alcance de radiofrecuencia Batería Vida útil de la batería convencional 15 m, 85,9° Sí Hasta 30 kg (altura < 40 cm) Anterior y posterior Azul (alarma) -10 °C a 55 °C (14 °F a 131 °F) -10 °C a 40 °C (14 °F a 104 °F), certificado -20 °C a 60 °C (-4 °F a 140 °F) 10 % a 90 % 1,8 a 2,4 m 65,5 mm x 103 mm x 48,5 mm 128 g 1,6 km (área abierta) 1 batería CR123A (incluida) 5 años ESPAÑOL 1 3 2 4 APRESENTAÇÃO INSTALAÇÃO REGISTRO I. Verifique a intensidade do sinal. II. Instale o dispositivo. a. Monte o detector com parafusos. b. Monte o detector com fita esponjosa. III. Instale o dispositivo com suporte (opcional). 1. Indicador2. Porta antiviolação do suporte 4. Interruptor de violação5. Interruptor 3. Bateria TESTE Manual do usuário Especificação Leia o código QR para mais informações e ajuda na operação. Alcance de detecção Sensibilidade automática Imunidade a pet Proteção antiviolação Indicador LED Temperatura de operação Temperatura de armazenamento Umidade de operação Altura de instalação Dimensões (L x A x P) Peso Frequência de transmissão Faixa de RF Bateria Duração padrão da bateria 15 m, 85,9° Sim Até 30 kg (altura < 40 cm) Frontal e traseira Azul (alarme) -10 °C a 55 °C (14 °F a 131 °F) -10 °C a 40 °C (14 °F a 104 °F) certificada -20 °C a 60 °C (-4 °F a 140 °F) 10% a 90% 1,8 m a 2,4 m 65,5 mm x 103 mm x 48,5 mm 128 g 433.1 MHz 1,6 km (espaço aberto) 1 x CR123A (incluída) 5 anos PORTUGUÊS 1 3 2 4 Low Voltage Value 2.45 V ©2020 Hangzhou Hikv ision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. and othe r Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR AN…

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. Address No. 555 Qianmo Road, Binjiang District Hangzhou 310052, China Grantee Code 2ADTD FCC ID 2ADTD-D0115021 Authorized Contact Name Xiuying Zhang Contact Email [email protected] Contact Phone +86-571-88075998 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date:2020/6/23 Print Name: Xiuying Zhang Title: Senior Certification engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Hangzhou Hikvision Digital Technology Co., Ltd. Date: 2020-6-23 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ADTD-D0115021 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Xiuying Zhang Title: Senior Certification engineer Signature: On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +86-0571-88075998-62460

Hangzhou Hikvision Digital Technology Co., Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Regarding: Confidentiality Request regarding application for FCC ID: 2ADTD-D0115021 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Xiuying Zhang Title: Senior Certification engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 3 Page 1 of 3 External Photos Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Equipment Under Test (EUT): Product Name: Wireless PIR Detector Model No.: DS-PDP15P-EG2-WB SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 3 Page 2 of 3 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 3 Page 3 of 3 End

Label location FCC statement

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 3 Page 1 of 3 Internal Photos Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Equipment Under Test (EUT): Product Name: Wireless PIR Detector Model No.: DS-PDP15P-EG2-WB SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 3 Page 2 of 3 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 3 Page 3 of 3 End

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600491301 Page: 1 of 19 Parlam Zhan E&E Section Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. 1 Cover Page RF REPORT Application No.: SHEM2006004913CR FCC ID: 2ADTD-D0115021 Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Manufacturer: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Manufacturer: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Factory: Hangzhou Hikvision Electronics Co., Ltd. Address of Factory: No.299,Qiushi Road,Tonglu Economic Development Zone,Tonglu County, Hangzhou,Zhejiang,310052,China. Equipment Under Test (EUT): EUT Name: Wireless PIR Detector Model No.: DS-PDP15P-EG2-WB, DS-PDC15-EG2-WB, DS-PDP15P-EG2-WBUHK, DS-PDP15P-EG2-WBCKV, DS-PDP15P-EG2-WBUVS, DS-PDP15P-EG2- WBKVO, DS-PDP15P-EG2-WBHUN, DS-PDC15-EG2-WB, DS-PDC15- EG2-WBUHK, DS-PDC15-EG2-WBCKV, DS-PDC15-EG2-WBUVS, DS- PDC15-EG2-WBBKVO, DS-PDC15-EG2-WBHUN ¤ ¤ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade mark: HIKVISION Standard(s) : 47 CFR Part 15, Subpart C 15.231 Date of Receipt: 2020-06-22 Date of Test: 2020-06-24 to 2020-07-14 Date of Issue: 2020-07-16 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600491301 Page: 2 of 19 Revision Record Version Description Date Remark 00 Original 2020-07-16 / Authorized for issue by: Micheal Niu / Project Engineer Parlam Zhan /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600496401 Page: 3 of 19 2 Test Summary Test Item FCC Requirement Test method Result Antenna Requirement Part 15.203 / PASS Conducted Emission Part 15.207 ANSI C63.10 (2013) Section 6.2 N/A Field Strength of the Fundamental Part 15.231 (b ) ANSI C63.10 (2013) Section 6.4 PASS Radiated Spurious emissions Part 15.209 15.231(b) ANSI C63.10 (2013) Section 6.4&6.5&6.6 PASS 20dB Bandwidth Part 15.231 (c) ANSI C63.10 (2013) Section 6.9.2 PASS Dwell Time Part 15.231 (a) ANSI C63.10 (2013) Section 7.8.4 PASS Note: Declaration of EUT Family Grouping: There are series models mentioned in this report, and they are the identical in electrical and electronic characters. Only the model DS-PDP15P-EG2-WB was tested since their differences were the model number. N/A: This EUT is powered by battery only; therefore the AC Conducted Emission test is not applicable. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600496401 Page: 4 of 19 3 Contents Page 1 COVER PAGE .............................................................................................................................................1 2 TEST SUMMARY ........................................................................................................................................3 3 CONTENTS ..................................................................................................................................................4 4 GENERAL INFORMATION .......................................................................................................................5 4.1 GENERAL DESCRIPTION OF E.U.T..............................................................................................................5 4.2 TECHNICAL SPECIFICATIONS: ....................................................................................................................5 4.3 DESCRIPTION OF SUPPORT UNITS ..............................................................................................................5 4.4 MEASUREMENT UNCERTAINTY .................................................................................................................5 4.5 TEST LOCATION .......................................................................................................................................6 4.6 TEST FACILITY .........................................................................................................................................6 5 EQUIPMENTS USED DURING TEST .......................................................................................................7 6 TEST RESULTS AND MEASUREMENT DATA .......................................................................................8 6.1 ANTENNA REQUIREMENT ..........................................................................................................................8 6.2 CONDUCTED EMISSIONS AT AC POWER LINE (150KHZ-30MHZ) ................................................................9 6.3 SPURIOUS EMISSIONS.............................................................................................................................. 10 6.4 20DB BANDWIDTH ................................................................................................................................. 16 6.5 DWELL TIME .......................................................................................................................................... 17 7 TEST SETUP PHOTOGRAPHS ............................................................................................................... 19 8 EUT CONSTRUCTIONAL DETAILS ............................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 4 Page 1 of 4 Test Setup Photos-FCC Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Equipment Under Test (EUT): Product Name: Wireless PIR Detector Model No.: DS-PDP15P-EG2-WB SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 4 Page 2 of 4 1 Contents Page 1 CONTENTS .......................................................................................................... 2 2 EQUIPMENT UNDER TEST PICTURES .......................................................... 3 2.1 Spurious emissions ....................................................................................... 3 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 4 Page 3 of 4 2 EQUIPMENT UNDER TEST PICTURES 2.1 Spurious emissions 30MHz-1GHz Above 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 4 Page 4 of 4 Zoom: End