2ADTD-D0412011Wireless PIR Ceiling Detector

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Wireless PIR Ceiling Detector DS-PDCL12-EG2-WB User Manual 3min 1 2 3 4 1234 Signal Strength Test a. b. xxxx Device I II 1432 o 8 m 2.4 m 3 m 4 m 10 m 12 m o 2m 4m 6m 2m 4m 6m 0 2m 4m 6m 2m 4m 6m 0 Zone: 172 Plane: 3 User Manual ENGLISH User Manual Specification APPEARANCE 1. Indicator4. Tamper Button2. Power Switch TEST 4 INSTALLATION 3 1 2 ENROLLMENT Scan the QR code for more information and operation help. 3. Battery I. Check signal strength. II. Install the device. a. Mount the detector with screw. b. Mount the detector with sponge tape (non EN compliant). Note: when the low voltage message appears there will be at least 30 days of use. Detection Range12 m Detection Angle360° Detection Zones172 Tamper ProtectionFront, Rear LED IndicatorBlue (Alarm) Transmission Frequency433 MHz Transmission Range800 m (open area) BatteryCR123A × 1 (included), 3V/1600 mAh Standard Battery Life5 Years Operation Temperature-10 °C to 55 °C (14 °F to 131 °F) Storage Temperature-20 °C to 60 °C (-4 °F to 140 °F) Operation Humidity10% to 90% Dimension (D × D)101.2 mm x 32.9 mm Weight109.5 g Mounting Height2.4 to 4m Mounting Method Ceiling PORTUGUÊS Manual do usuário Especificações APRESENTAÇÃO 1. Indicador4. Botão de violação2. Interruptor TESTE 4 INSTALAÇÃO 3 1 2 REGISTRO Leia o código QR para mais informações e ajuda na operação. 3. Bateria I. Verifique a intensidade do sinal. II. Instale o dispositivo. a. Monte o detector com parafusos. b. Monte o detector com fita adesiva de espuma (sem conformidade com a EN). Nota: quando a mensagem de baixa tensão aparecer, haverá pelo menos 30 dias de uso. Faixa de detecção12 m Ângulo de detecção360° Zonas de detecção172 Proteção antiviolaçãoFrontal e traseira Indicador LEDAzul (alarme) Frequência de transmissão433 MHz Intervalo de transmissão800 m (área aberta) BateriaCR123A × 1 (inclusa), 3 V/1.600 mAh Duração padrão da bateria5 anos Temperatura de operação-10 °C a 55 °C (14 °F a 131 °F) Temperatura de armazenamento-20 °C a 60 °C (-4 °F a 140 °F) Umidade de operação10% a 90% Dimensões (D × P)101,2 mm x 32,9 mm Peso109,5 g Altura de montagem2,4 a 4 m Método de montagem Te t o ESPAÑOL Manual de usuario Especificación APARIENCIA 1. Piloto 4. Botón antimanipulación 2. Interruptor de alimentación PRUEBA 4 INSTALACIÓN 3 1 2 REGISTRO Escanee el código QR para obtener más información y ayuda sobre el funcionamiento. 3. Batería I. Comprobar la intensidad de la señal. II. Instalar el dispositivo. a. Montaje del sensor con tornillos. b. Montaje del sensor con burlete adhesivo de espuma (no conforme a la norma EN). Nota: La aparición del mensaje de baja tensión indica que restan al menos 30 días de uso. Alcance de detección12 m Ángulo de detección360 ° Zonas de detección172 Protección antimanipulaciónFrontal y posterior Piloto ledAzul (alarma) Frecuencia de transmisión433 MHz Alcance de transmisión800 m (zona abierta) Batería1 batería CR123A (incluida) de 3 V/1600 mAh Duración promedio de la batería5 años Temperatura de funcionamiento-10 °C a 55 °C (14 °F a 131 °F) Temperatura de almacenamiento-20 °C a 60 °C (-4 °F a 140 °F) Humedad de funcionamiento10 % a 90 % Dimensiones101,2 mm x 32,9 mm Peso109,5 g Altura de montaje2,4 a 4 m Método de montaje Techo SLOVENČINA Návod na používanie Špecifikácie VZHĽAD 1. Indikátor 4. Tlačidlo ochrany pred cudzím zásahom 2. Vypínač TEST 4 MONTÁŽ 3 1 2 REGISTRÁCIA Ak chcete získať ďalšie informácie a pokyny na používanie, naskenujte QR kód. 3. Batéria I. Skontrolujte intenzitu signálu. II. Nainštalujte zariadenie. a. Namontujte detektor pomocou skrutky. b. Namontujte detektor pomocou penovej pásky (nespĺňa normu EN). Poznámka: po zobrazení správy o nízkom napätí, je možné produkt používať ešte min. 30 dní. Rozsah detekcie12 m Detekčný uhol360° Detekčné zóny172 Ochrana pred cudzím zásahomPredná, zadná Indikátor LEDModrý (alarm) Frekvencia prenosu433 MHz Rozsah prenosu800 m (otvorený priestor) BatériaCR123A × 1 (súčasťou balenia), 3 V/1600 mAh Štandardná životnosť batérie5 rokov Prevádzková teplota-10 °C až 55 °C (14 °F až 131 °F) Teplota uskladnenia-20 °C až 60 °C (-4 °F až 140 °F) Prevádzková vlhkosť10 % až 90 % Rozmery (priemer × hĺbka)101,2 mm x 32,9 mm Hmotnosť109,5 g Montážna výška2,4 až 4 m Metóda montáže Strop ျမန္မာ သံုးစြဲသူလက္စြဲ အေသးစိတ္ အခ်က္အလက္ အသြင္အျပင္လကၡဏာ 1. အခ်က္ျပမီး4. အတားအဆီးထိန္း ခလုတ္2. ပါဝါခလုတ္ စစ္ေဆးျခင္း 4 တပ္ဆင္ျခင္း 3 1 2 စာရင္းသြင္းျခင္း ေနာက္ထပ္အခ်က္အလက္မ်ားႏွင့္ လုပ္ေဆာင္မႈ အကူအညီအတြက္ QR ကုဒ္ကို စကန္ဖတ္ပါ။ 3. ဘက္ထရီ I. လိုင္းဆြဲအားကို စစ္ပါ။ II. စက္ကို တပ္ဆင္ပါ။ a. ေထာက္လွမ္းကိရိယာကို ဝက္အူျဖင့္ တပ္ဆင္ပါ။ b. ေထာက္လွမ္းကိရိယာကို (EN လိုက္နာမႈမရွိေသာ) ေရျမႇဳပ္တိပ္ျဖင့္ တပ္ဆင္ပါ။ မွတ္ခ်က္- ဗို႔အားနည္း မက္ေဆ့ခ်္ ေပၚလာေသာအခါ အနည္းဆံုး အသံုးျပဳမႈ ရက္ 30 ရွိၿပီးျဖစ္မည္။ ရွာေဖြသိရွိမႈ အကြာအေဝး12 m ရွာေဖြသိရွိမႈ ေထာင့္ခ်ိဳး360° ရွာေဖြသိရွိမႈ ဇုန္မ်ား172 အမွတ္တမဲ့ျဖစ္မႈမွ ကာကြယ္ျခင္းေရွ႕၊ ေနာက္ LED အညႊန္းမီးအျပာ (ႏႈိးစက္) ထုတ္လႊတ္သည့္ ဖရီကြင္စီ433 MHz ထုတ္လႊတ္မႈ အပိုင္းအျခား800 m (အမိုးအကာမရွိသည့္ ေနရာ) ဘက္ထရီCR123A × 1 (ပါဝင္သည္)၊ 3V/1600 mAh စံဘက္ထရီသက္တမ္း5 ႏွစ္ လုပ္ေဆာင္ရန္ အပူခ်ိန္-10 °C မွ 55 °C (14 °F မွ 131 °F) သိမ္းဆည္းရန္ အပူခ်ိန္-20 °C မွ 60 °C (-4 °F မွ 140 °F) လုပ္ေဆာင္ရန္ စိုထိုင္းဆ10% မွ 90% အတိုင္းအတာ (D × D)101.2 mm x 32.9 mm အေလးခ်ိန္109.5 g တပ္ဆင္မႈ အျမင့္2.4 မွ 4m တပ္ဆင္ေရး နည္းလမ္း မ်က္နွာၾကက္ UD22337B-A CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China ©2020 Hangzhou Hikvision Digital Technology Co., Ltd. Todos os direitos reservados. Acerca deste Manual O Manual inclui instruções para utilizar e gerir o produto. As fotografias, os gráficos, as imagens e todas as outras informações doravante apresentadas destinam-se apenas a fins de descritivos e informativos. As informações que constam do Manual estão sujeitas…

Text truncated - open the document above for the full version.

QF094234 Page 1 of 1 Revision 0 Authority to Act as Agent Date: _2020-10-20_______ TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern: I appoint TUV Rheinland (Shenzhen) Co., Ltd Mr Bell Hu to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____ 12 months____ By: Xiuying Zhang (Signature) (Print name) Title: ____ Telephone On behalf of: Hangzhou Hikvision Digital Technology Co.,Ltd. (Company Name)

Confidentiality Letter Date: 2020-10-20 Subject: Confidentiality Request Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term Permanent External Photos Short Term Permanent Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Part List/Tune-Up Procedure Short Term Permanent Schematics Short Term Permanent Test Setup Photos Short Term Permanent User’s Manual Hangzhou Hikvision Digital Technology Co.,Ltd. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04- 1705. Sincerely, By: (Signature/Title) (Print name)

External Photo Product: Wireless PIR Ceiling Detector Type Designation: DS-PDCL12-EG2-WB Rev. 0 External Photo Product: Wireless PIR Ceiling Detector Type Designation: DS-PDCL12-EG2-WB Rev. 0 External Photo Product: Wireless PIR Ceiling Detector Type Designation: DS-PDCL12-EG2-WB Rev. 0

FCC ID: 2ADTD-D0412011 Label and Label Location

Internal Photo Photo Documentation Product: Wireless PIR Ceiling Detector Type Designation: DS-PDCL12-EG2-WB Rev. 0 Internal Photo Photo Documentation Product: Wireless PIR Ceiling Detector Type Designation: DS-PDCL12-EG2-WB Rev. 0 Internal Photo Photo Documentation Product: Wireless PIR Ceiling Detector Type Designation: DS-PDCL12-EG2-WB Rev. 0

FCC ID: 2ADTD-D0412011 Radio Frequency Exposure Compliance RESULT: Pass Test Specification Test standard : CFR47 FCC Part 2.1093 Limit : FCC KDB Publication 447498 D01 v06 Measurement Record for CFR47 FCC Part 2.1093 The minimum distance for the EUT is less than 5mm. The maximum specified e.r.p.: 61.20dBuV/m@3m=-36.21dBm=0.0002mW According to KDB 447498 D01 v06 appendix A Exempted Power for this device: 22mW, hence the EUT is compliance with the RF exposure.

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN20JAGA 001 Auftrags-Nr.: Order no.: 168294563 Seite 1 von 17 Page 1 of 17 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2020-12-11 Auftraggeber: Client: Hangzhou Hikvision Digital Technology Co., Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Prüfgegenstand: Test item: Wireless PIR Ceiling Detector Bezeichnung / Typ-Nr.: Identification / Type no.: DS-PDCL12-EG2-WB, DS-PDCL12-EG2-WBUHK, DS-PDCL12-EG2-WBCKV, DS- PDCL12-EG2-WBUVS, DS-PDCL12-EG2-WBKVO, DS-PDCL12-EG2-WBHUN Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: FCC 47 CFR Part 15.203 FCC 47 CFR Part 15.231 FCC 47 CFR Part 2.1093 Wareneingangsdatum: Date of sample receipt: 2020-12-20 Refer to Photo Documentation Prüfmuster-Nr.: Test sample no: A002966999-015, 016 Prüfzeitraum: Testing period: 2020-12-29 to 2021-01-06 Ort der Prüfung: Place of testing: Refer to section 2.1 Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X genehmigt von: authorized by: X Datum: Date: 2021-01-11 Ausstellungsdatum: Issue date: 2021-01-11 Stellung / Position: Sachverständige(r) / Expert Stellung / Position: Sachverständige(r) / Expert Sonstiges / Other: FCC ID: 2ADTD-D0412011 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TÜV Rheinland (Shenzhen) Co., Ltd. 1601 R&D Room, 1602-1604, 17-18F, Building 7 Site C, Vanke Cloud City Phase I, Xingke First Street, Xili Street, Xili Community, Nanshan District, Shenzhen 518052, P.R. China Mail: [email protected] · Web: www.tuv.com jjj Hardy Suo Sam Lin Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No. CN20JAGA 001 Seite 2 von 17 Page 2 of 17 TEST SUMMARY 5.1.1 Antenna Requirement RESULT: Pass 5.1.2 Deactivation of the Transmission RESULT: Pass 5.1.3 20dB Emission Bandwidth RESULT: Pass 5.1.4 Field strength of fundamental and Unwanted Emissions in the Spurious Domain RESULT: Pass 5.1.5 Radio Frequency Exposure Compliance RESULT: Pass Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No. CN20JAGA 001 Seite 3 von 17 Page 3 of 17 CONTENTS 1. GENERAL REMARKS ............................................................................................................ 4 1.1 COMPLEMENTARY MATERIALS ........................................................................................ 4 1.2 TEST STANDARD(S) ....................................................................................................... 4 2. TEST SITES ......................................................................................................................... 4 2.1 TEST FACILITIES ............................................................................................................ 4 2.2 TEST DATE ................................................................................................................... 4 2.3 LIST OF TEST AND MEASUREMENT INSTRUMENTS ............................................................ 5 2.4 TRACEABILITY ............................................................................................................... 6 2.5 CALIBRATION ................................................................................................................ 6 2.6 LOCATION OF ORIGINAL DATA ........................................................................................ 6 2.7 STATUS OF FACILITY USED FOR TESTING ........................................................................ 6 3. GENERAL PRODUCT INFORMATION ....................................................................................... 7 3.1 PRODUCT FUNCTION AND INTENDED USE ....................................................................... 7 3.2 RATINGS AND SYSTEM DETAILS...................................................................................... 7 3.3 INDEPENDENT OPERATION MODES ................................................................................. 7 3.4 NOISE GENERATING AND NOISE SUPPRESSING PARTS .................................................... 8 3.5 SUBMITTED DOCUMENTS ............................................................................................... 8 4. TEST SET-UP AND OPERATION MODES ................................................................................. 9 4.1 PRINCIPLE OF CONFIGURATION SELECTION ..................................................................... 9 4.2 TEST OPERATION AND TEST SOFTWARE ......................................................................... 9 4.3 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT ........................................................ 9 4.4 COUNTERMEASURES TO ACHIEVE ERM COMPLIANCE ..................................................... 9 4.5 TEST SETUP DIAGRAM ................................................................................................. 10 5. TEST RESULTS ......................................…

Text truncated - open the document above for the full version.

Prüfbericht - Produkte Test Report - Products Appendix B CN20JAGA 001 Page 1 of 2 Appendix B: Photographs of the Test Set-Up APPENDIX B: PHOTOGRAPHS OF THE TEST SET-UP .......................................................................... 1 APPENDIX B.1: SET-UP FOR RADIATED EMISSIONS, BELOW 1 GHZ .................................................... 2 APPENDIX B.2: SET-UP FOR RADIATED EMISSIONS, ABOVE 1 GHZ .................................................... 2 Prüfbericht - Produkte Test Report - Products Appendix B CN20JAGA 001 Page 2 of 2 Appendix B.1: Set-up for Radiated Emissions, below 1 GHz Appendix B.2: Set-up for Radiated Emissions, above 1 GHz